Sinov ap1000 asterisk ippbx user manual

AP100 User Manual

www.sinovoip.com.cn1

SinoVoip AP1000 Hardware Development Platform

User's Manual

AP100 User Manual


AP1000_4FXO/FXS

AP1000_8FXO/FXS

AP1000_1 E1/T1

AP1000_2 E1/T1

AP100 User Manual


AP1000 is an ideal for small and medium hardware development platform, whichis based on the integration of Asterisk IPPBX solutions, plug plate design by precludethe use of a modular,In a small chassis, it integrates a variety of communication interface imports,

including analog access of imported FXO / FXS, digital access of imported E1 / T1.

AP1000 hardware development platform supports comprehensive protocolprocessing, which is installed in the Linux-based operating system, and completelyopen to the developers , developers on this platform is very easy to do secondarydevelopment, to provide more value-added services unique.

AP1000 hardware platform overall Introduction1, AP1000 hardware platform is composed of three parts as embedded boards,bus adapter plate &Asterisk voice card .

DC +12V

Power inputVGA Ethernet

port1

Plug voicecard

USB1 USB2

Ethernet

port 2

RS232

AP100 User Manual


Power LED

HDD indicator

light

FXO/FXS 1thindicate

FXO/FXS 2ndindicate

FXO/FXS 3rdindicate

FXO/FXS 4thindicate

FXO/FXS7th indicate

FXO/FXS6th indicate

FXO/FXS 8th

indicate

FXO/FXS 5thindicate

AP100 User Manual


Embedded mainboard

Hard dishThe bus adapter plate

Voice card

RAM

AP100 User Manual


Plug in and pull outguide rail

Plug in and pull outguide rail

Voice card have 4kinds

AP1000_4FXO/FXS

AP1000_8FXO/FXS

AP1000_1 E1/T1

AP1000_2 E1/T1

AP100 User Manual


2、Embedded Motherboard Specifications

CPU Processor：Intel® Celeron® Processor 1037U (2M Cache, 1.80 GHz) RAM：2GB DDR3 SDRAM (Maxim can expand to 8GB) Hard dish capacity： 500G 2 USB2.0 connector 2 100Mbps Ethernet interface imports 1 VGA connector 1 232 serial port

AP100 User Manual


AP1000_4FXO / FXS voice card introduction

1． Support Quad FXO or FXS, and FXO and FXS can choose anycombination ，red module is FXO, green module is FXS.

2． Driver layer totally compatible with Asterisk card, we can enjoy Rourcecode security and stability.

3． No need additional installation drivers, to avoid potential risks. Asteriskcomes complete with DAHDI / Zaptel driver (wctdm24xxp driver, no needto install any patches

4． Support Linux, BSD operating system, CentOS, openSUSE, Fedora,Debian, Ubuntu, AstLinux, FreeBSD, OpenBSD.

5． Base on DMA read and write data on technology to support fast datatransfer, significantly reducing the CPU usage of the computer.

6． Support codec A-Law, μ-Law, G.729, G.723, GSM, GSM, Speex, ADPCMformat.

7. Using pluggable architecture, very easy to replace.8. In order to prevent loosening during transport modules, each one module has afixed column with base plate closely linked, very reliable.

1thconnector

2ndconnector

3rdconnector

4th

connector 1th module2ndmodule

3rd module4th module

AP100 User Manual


9, After loading the drivers are OK, the front four LEDs L1, L2, L3, L4 isilluminated

Fixed leg Fixed leg Fixed leg Fixed leg

AP100 User Manual


AP1000_8FXO / FXS voice card introduction

1．Support eight FXO or FXS, and FXO and FXS can choose any combination, redmodule is FXO, green module is FXS.

2．Driver layer is fully compatible with Asterisk card, enjoy Rource code securityand stability3．No need additional installation drivers, to avoid potential risks. Asterisk comes

complete with DAHDI / Zaptel driver (wctdm24xxp driver, no need to installany patches).

4．Support Linux, BSD operating system, CentOS, openSUSE, Fedora, Debian,Ubuntu, AstLinux, FreeBSD, OpenBSD.

5．Base on DMA read and write data on technology to support fast data transfer,significantly reducing the CPU usage of the computer.)

1th connector

2nd connector

3rd connector

4th connector

5th connector

6th connector

7th connector

8th connector

3rd module

4th module

2nd module

1th module

5th module

7th module

6th module

8th module

AP100 User Manual


6．Supports A-Law, μ-Law, G.729, G.723, GSM, GSM, Speex Codec ADPCMformat.

7．Using pluggable architecture, very easy to replace.8．In order to prevent loosening during transport modules, each one module has a

fixed column with base plate closely linked, very reliable.)

9, After loading the drive normal, positive eight LEDs L1, L2, L3, L4, L5, L6, L7, L8lights up.

Fixed leg Fixed leg Fixed leg Fixed leg

Fixed leg Fixed leg Fixed legFixed leg

AP100 User Manual


AP1000_1 E1 / T1 voice card introduction

1．It supports one E1 / T1 / J1 digital trunk lines, supporting SS7 (TUP / ISUP),PRI, R2 and other signaling.

2．Supports the industry-standard telephony and data protocols, including SS7signaling VII, PPP, Cisco, HDLC, and Frame Relay data modes.3．Driver layer is fully compatible with Asterisk card, we can enjoy Rourcecode security and stability.4．No need additional installation drivers, to avoid potential risks. Asterisk

comes completely DAHDI / Zaptel driver (wtc4xxxP driver, no need toinstall any patches

5．Support Linux, BSD operating system, CentOS, openSUSE, Fedora, Debian,Ubuntu, AstLinux, FreeBSD, OpenBSD.)

6． DMA read and write data on technology to support fast data transfer,significantly reducing the CPU usage of the computer.)

7．Support codec A-Law, μ-Law, G.729, G.723, GSM, GSM, Speex, ADPCMformat.

8．Via PCB board dial switch to select E1 and T1 mode.9．Using pluggable architecture, very easy to replace.

Choose E1/T1 by Dial

swith

AP100 User Manual


AP1000_2 E1 / T1 voice card introduction

1．Support second Road E1 / T1 / J1 digital trunk lines, supporting SS7 (TUP /ISUP), PRI, R2 and other signaling.）

2．Supports the industry-standard telephony and data protocols, including SS7signaling VII, PPP, Cisco, HDLC, and Frame Relay data modes.）3． Driver layer is fully compatible with Asterisk card, enjoy Rource codesecurity and stability.4．No need additional installation drivers, to avoid potential risks. Asterisk

comes completely DAHDI / Zaptel driver (wtc4xxxP driver, no need toinstall any patches

4．Support Linux, BSD operating system, CentOS, openSUSE, Fedora, Debian,Ubuntu, AstLinux, FreeBSD, OpenBSD.

5．Base on DMA read and write data on technology to support fast data transfer,significantly reducing the CPU usage of the computer.）

6．upport codec A-Law, μ-Law, G.729, G.723, GSM, GSM, Speex, ADPCMformat.

7．Via PCB board dial switch to select E1 and T1 mode.8．Using pluggable architecture, very easy to replace.

Choose E1/T1 by Dial

swith

AP100 User Manual


AP1000 hardware development platform use method

1. AP1000 packaging, size 410mm X 430mm X 70mm

AP100 User Manual


2, Open the packaging AP1000

Power line AP1000 hardware +12V DC adapter

AP100 User Manual


3．Different countries use different standard power supply, AP1000 offers

two power lines, customer need to determine what kind before buying .

EU Power supply

China Standard power supply

AP100 User Manual


4．1PCS DC+12V 6A Power adapter

5．Steps of install the system1）Display via VGA interface to access AP1000.2）USB keyboard via USB1 interface to access AP1000.3）USB drive or U disk via USB2 interface to access AP1000.4）AP1000 embedded motherboard uses the power easyable start, as long as a

power plug adapter insert AP1000, AP1000 embedded motherboards will startup.

5）Embedded motherboards boot AP1000 hardware platform, there are three mainways, SATA hard drives, USB drives and U disk.

A) power plug adapter insert AP1000 hardware platform, press Del or Delete

key immediately, the Del key in the bottom right corner of the keyboard, and

some may use the delete key instead of this, as below

After enter BIOS, default is Main (Main Menu)interface, as below

http://jingyan.baidu.com/album/6f2f55a1bc7caab5b93e6cb0.html?picindex=2

AP100 User Manual


B) Then use left right keys to move the cursor to the BOOT this option to

enter the interface shown in Figure:

AP100 User Manual


C) Hard Drive BBS priorities of the inserted hard disk detection options, press

Enter to enter this sub-menu, such as inserting multiple hard drives, you can

choose which specific hard disk boot.

D) USB Device BBS priorities of the inserted USB device detection options

such as USB U disk, USB drive, USB other storage devices, Enter to enter

this sub-menu, select the device you want to start. Show as below

AP100 User Manual


E) BOOT Option # 1 first boot device BOOT Option # 2 second boot device

BOOT Option # 3 The third boot device

AP100 User Manual


F) After setting press F4 to save and exit. YES Enter.

6）System ShutdownWhen the system is turned off by way of software, the screen went blank,Please be Noted, AP1000 hardware platform and not a total blackout,pluggable voice card can not be implemented at this time, it is necessaryto dial down power plug adapter, AP1000 hardware platform was a totalblackout, now can pluggable voice card (Charged pluggable voice card

may be damaged AP1000 hardware platform).

AP100 User Manual


Only after pull out power adapter, the power LEDwill offer, then AP1000 can totally power cut, andthen plug and pull out the voice card (or it willdamage AP1000

AP100 User Manual


For example: AP1000 hardware platform, insert a AP1000_2FXO + 2FXS voicecard, install Elastix

Here is dahdi_hardware, dahdi_scan tool detects results

dahdi_cfg Loading configuration

AP100 User Manual


The following channels was saw on dahdi show channels under asterisk cli. Differentmodules configured with different results, do not represent all configurations. Forexample 2FXO, 2FXS of channels

For example 4FXO channel

Documents

Sinov ap1000 asterisk ippbx user manual