16
Ø3” Ø76mm 11-1/8” 283mm Surface level J-box (not included) 01-2018 t 1.877.708.1184 f 604.708.1185 www.mplighting.com 16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada Copyright © MP Lighting. All technical information in this document is subject to change. 6W Glass Pendant P81LC1 SPEC SHEET Application: Interior pendant. Glass: Open top and bottom, cylinder shaped hand blown opalescent cased glass. Source: 6 x 1W, 350mA LEDs. LED Input Voltage: 12V AC or 24V DC Power Consumption: 8W Power Supply: (not included) 24V DC - Powered by remote 120V primary, 350mA driver. Recommended TLDAV100W24V. Dimmable with 100W 24V driver and controller, 0~10V dimming. Consult factory. AC -Powered by remote 120V primary, 12V secondary magnetic transformer. Recommended 12V AC magnetic transformer (not included). Consult factory for dimming option. Mounting Material: Anodized aluminum. Mounting: C1M retrofit to existing standard octagonal box using custom mounting plate (included). Approval: Dry locations. Approved to US and Canadian standards by CSA. Type: Project: Modified: Quantity: Notes: WH = white opalescent Shown with white opalescent glass shade (WH). C1M (retrofit mounting plate) M = matte clear anodized CODE MOUNT SHADE COLOR INPUT VOLTAGE MOUNTING FINISH P81L C1M - WH - 1A = 12V AC 2D = 24V DC C1M = Ø2-3/8” x 1/4” canopy, retrofit mounting plate W20 = 2000K W27 = 2700K W30 = 3000K W35 = 3500K W41 = 4100K Note: W20 has consistent binning that falls within 1.5 MacAdam ellipse.

SPEC SHEET - MP Lighting · 6W Glass Pendant P81LC2 SPEC SHEET Application: Interior pendant. Glass: Open top and bottom, cylinder shaped hand blown opalescent cased glass. Source:

  • Upload
    lambao

  • View
    217

  • Download
    0

Embed Size (px)

Citation preview

Ø3”Ø76mm

11-1/8”283mm

Surfacelevel

J-box(not included)

01-2018

t 1.877.708.1184 f 604.708.1185 www.mplighting.com16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada Copyright © MP Lighting. All technical information in this document is subject to change.

6W Glass Pendant

P81LC1SPEC SHEET

Application: Interior pendant.

Glass: Open top and bottom, cylinder shaped hand blown opalescent cased glass.

Source: 6 x 1W, 350mA LEDs.

LED Input Voltage: 12V AC or 24V DC Power Consumption: 8W

Power Supply: (not included) 24V DC - Powered by remote 120V primary, 350mA driver. Recommended TLDAV100W24V. Dimmable with 100W 24V driver and controller, 0~10V dimming. Consult factory. AC -Powered by remote 120V primary, 12V secondary magnetic transformer. Recommended 12V AC magnetic transformer (not included). Consult factory for dimming option.

Mounting Material: Anodized aluminum.

Mounting: C1M retrofit to existing standard octagonal box using custom mounting plate (included).

Approval: Dry locations. Approved to US and Canadian standards by CSA.

Type:

Project:

Modified:

Quantity:

Notes:

WH = white opalescent

Shown with white opalescent glass shade (WH).

C1M (retrofit mounting plate)

M = matte clear anodized

Code Mount Shade Color Input Voltage MountIng FInISh

P81L C1M - WH -

1A = 12V AC2D = 24V DC

C1M = Ø2-3/8” x 1/4” canopy, retrofit mounting plate

W20 = 2000KW27 = 2700KW30 = 3000KW35 = 3500KW41 = 4100K

Note: W20 has consistent binning that falls within 1.5 Macadam ellipse.

0° Spread: 35.6° 90° Spread: 35.0°

Center Beam FC Beam Width

3.0’

2.5’

2.0’

1.5’

1.0’

0.5’

1.9’

1.6’

1.3’

1.0’

0.6’

0.3’

1.9’

1.6’

1.3’

0.9’

0.6’

0.3’568

142

63.1

35.5

22.7

15.8

180°

90°

45°-45°

-90°

approx. 142 cdmax.

Illuminance at a DistanceP81L3000K Std181 lm

Polar Candela Distribution

Copyright © MP Lighting. All technical information in this document is subject to change. 01-2018

t 1.877.708.1184 f 604.708.1185 www.mplighting.com16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada

Photometric Data

Note: Various operating factors may cause differences between lab and field results. as specifications may change without notice, please refer to the led lamp Index located in the “downloads” section of each product webpage for the most current information.

lumen test results provided by led chip manufacturer

6W Glass Pendant

P81LC1SPEC SHEET

Ø3”Ø76mm

11-1/8”283mm

2-5/8” Sq.67mm Sq.

1-3/4”44mm

3/8”10mm

Ø3”Ø76mm

11-1/8”283mm

J-box(not included)

Surfacelevel

01-2018

t 1.877.708.1184 f 604.708.1185 www.mplighting.com16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada Copyright © MP Lighting. All technical information in this document is subject to change.

6W Glass Pendant

P81LC2SPEC SHEET

Application: Interior pendant.

Glass: Open top and bottom, cylinder shaped hand blown opalescent cased glass.

Source: 6 x 1W, 350mA LEDs.

LED Input Voltage: 12V AC or 24V DC Power Consumption: 8W

Power Supply: (not included) 24V DC - Powered by remote 120V primary, 350mA driver. Recommended TLDAV100W24V. Dimmable with 100W 24V driver and controller, 0~10V dimming. Consult factory. AC -Powered by remote 120V primary, 12V secondary magnetic transformer. Recommended 12V AC magnetic transformer (not included). Consult factory for dimming option.

Mounting Material: Anodized aluminum.

Mounting: Standard 72” / 1829mm field adjustable coaxial cable. Longer custom length available. C2C mounts to 2” x 2” (51mm x 51mm) octagonal box and C2M retrofit to existing standard octagonal box using custom mounting plate (included).

Approval: Dry locations. Approved to US and Canadian standards by CSA.

Type:

Project:

Modified:

Quantity:

Notes:

C2C (custom octagonal box)

C2M (retrofit mounting plate)

Shown with white opalescent glass shade (WH).

WH = white opalescentC2C = 2-5/8” Sq. x 3/8” canopy custom octagonal boxC2M = 2-5/8” Sq. x 3/8” canopy retrofit mounting plate

M = matte clear anodizedB = black anodized

Code Mount Shade Color Input Voltage MountIng FInISh

P81L - WH -

1A = 12V AC2D = 24V DC

W20 = 2000KW27 = 2700KW30 = 3000KW35 = 3500KW41 = 4100K

Note: W20 has consistent binning that falls within 1.5 Macadam ellipse.

0° Spread: 35.6° 90° Spread: 35.0°

Center Beam FC Beam Width

3.0’

2.5’

2.0’

1.5’

1.0’

0.5’

1.9’

1.6’

1.3’

1.0’

0.6’

0.3’

1.9’

1.6’

1.3’

0.9’

0.6’

0.3’568

142

63.1

35.5

22.7

15.8

180°

90°

45°-45°

-90°

approx. 142 cdmax.

Illuminance at a DistanceP81L3000K Std181 lm

Polar Candela Distribution

Copyright © MP Lighting. All technical information in this document is subject to change. 01-2018

t 1.877.708.1184 f 604.708.1185 www.mplighting.com16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada

Photometric Data

Note: Various operating factors may cause differences between lab and field results. as specifications may change without notice, please refer to the led lamp Index located in the “downloads” section of each product webpage for the most current information.

lumen test results provided by led chip manufacturer

6W Glass Pendant

P81LC2SPEC SHEET

Ø3”Ø76mm

11-1/8”283mm

3-1/2”89mm

Ø4-5/8”Ø117mm

1/4”6mm

01-2018

t 1.877.708.1184 f 604.708.1185 www.mplighting.com16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada Copyright © MP Lighting. All technical information in this document is subject to change.

6W Glass Pendant

P81LC3SPEC SHEETApplication: Interior pendant.

Glass: Open top and bottom, cylinder shaped hand blown opalescent cased glass.

Feature: Blinking (frequency of 60~80 times per minute). Off when not activated.

Source: 6 x 1W, 350mA LEDs.

LED Input Voltage: 12V AC or 24V DC Power Consumption: 8W

Power Supply: (not included) 24V DC - Powered by remote 120V primary, 350mA driver. Recommended TLDAV100W24V. Dimmable with 100W 24V driver and controller, 0~10V dimming. Consult factory. AC -Powered by remote 120V primary, 12V secondary magnetic transformer. Recommended 12V AC magnetic transformer (not included). Consult factory for dimming option.

Mounting Material: Anodized aluminum.

Mounting: Mount to standard octagonal box (not included). Standard 72” / 1829mm field adjustable coaxial cable. Longer custom length available.

Approval: Dry locations. Approved to US and Canadian standards by CSA.

Type:

Project:

Modified:

Quantity:

Notes:

Shown with white opalescent glass shade (WH).

Code Mount Shade Color Input Voltage SteM/Cord MountIng FInISh

P81L C3 - WH -

C72= 72" (1829MM) cordCX = custom cord

C3 = Ø4-5/8” x 1/4” canopy M = matte clear anodized1A = 12V AC2D = 24V DC

W20 = 2000KW27 = 2700KW30 = 3000KW35 = 3500KW41 = 4100K

Note: W20 has consistent binning that falls within 1.5 Macadam ellipse.

0° Spread: 35.6° 90° Spread: 35.0°

Center Beam FC Beam Width

3.0’

2.5’

2.0’

1.5’

1.0’

0.5’

1.9’

1.6’

1.3’

1.0’

0.6’

0.3’

1.9’

1.6’

1.3’

0.9’

0.6’

0.3’568

142

63.1

35.5

22.7

15.8

180°

90°

45°-45°

-90°

approx. 142 cdmax.

Illuminance at a DistanceP81L3000K Std181 lm

Polar Candela Distribution

Copyright © MP Lighting. All technical information in this document is subject to change. 01-2018

t 1.877.708.1184 f 604.708.1185 www.mplighting.com16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada

Photometric Data

Note: Various operating factors may cause differences between lab and field results. as specifications may change without notice, please refer to the led lamp Index located in the “downloads” section of each product webpage for the most current information.

lumen test results provided by led chip manufacturer

6W Glass Pendant

P81LC3SPEC SHEET

Ø3”Ø76mm

11-1/8”283mm

4-5/8” Sq.117mm Sq.2-1/8”54mm

1/4”6mm

01-2018

t 1.877.708.1184 f 604.708.1185 www.mplighting.com16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada Copyright © MP Lighting. All technical information in this document is subject to change.

6W Glass Pendant

P81LC4SPEC SHEET

Application: Interior pendant.

Glass: Open top and bottom, cylinder shaped hand blown opalescent cased glass.

Source: 6 x 1W, 350mA LEDs.

LED Input Voltage: 12V AC or 24V DC Power Consumption: 8W

Power Supply: (not included) 24V DC - Powered by remote 120V primary, 350mA driver. Recommended TLDAV100W24V. Dimmable with 100W 24V driver and controller, 0~10V dimming. Consult factory. AC -Powered by remote 120V primary, 12V secondary magnetic transformer. Recommended 12V AC magnetic transformer (not included). Consult factory for dimming option.

Mounting Material: Anodized aluminum.

Mounting: Mount to standard octagonal box (not included). Standard 72” / 1829mm field adjustable coaxial cable. Longer custom length available.

Approval: Dry locations. Approved to US and Canadian standards by CSA.

Type:

Project:

Modified:

Quantity:

Notes:

C4 = 4-5/8” Sq. x 1/4” canopy

Shown with white opalescent glass shade (WH).

WH = white opalescent M = matte clear anodized

Code Mount Shade Color Input Voltage MountIng FInISh

P81L C4 - WH -

1A = 12V AC2D = 24V DC

W20 = 2000KW27 = 2700KW30 = 3000KW35 = 3500KW41 = 4100K

Note: W20 has consistent binning that falls within 1.5 Macadam ellipse.

0° Spread: 35.6° 90° Spread: 35.0°

Center Beam FC Beam Width

3.0’

2.5’

2.0’

1.5’

1.0’

0.5’

1.9’

1.6’

1.3’

1.0’

0.6’

0.3’

1.9’

1.6’

1.3’

0.9’

0.6’

0.3’568

142

63.1

35.5

22.7

15.8

180°

90°

45°-45°

-90°

approx. 142 cdmax.

Illuminance at a DistanceP81L3000K Std181 lm

Polar Candela Distribution

Copyright © MP Lighting. All technical information in this document is subject to change. 01-2018

t 1.877.708.1184 f 604.708.1185 www.mplighting.com16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada

Photometric Data

Note: Various operating factors may cause differences between lab and field results. as specifications may change without notice, please refer to the led lamp Index located in the “downloads” section of each product webpage for the most current information.

lumen test results provided by led chip manufacturer

6W Glass Pendant

P81LC4SPEC SHEET

Ø3”Ø76mm

11-1/8”283mm

01-2018

t 1.877.708.1184 f 604.708.1185 www.mplighting.com16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada Copyright © MP Lighting. All technical information in this document is subject to change.

6W Glass Pendant

P81LDCSPEC SHEET

Application: Interior pendant.

Glass: Open top and bottom, cylinder shaped hand blown opalescent cased glass.

Source: 6 x 1W, 350mA LEDs.

LED Input Voltage: 12V AC or 24V DC Power Consumption: 8W

Power Supply: (not included) 24V DC - Powered by remote 120V primary, 350mA driver. Recommended TLDAV100W24V. Dimmable with 100W 24V driver and controller, 0~10V dimming. Consult factory. AC -Powered by remote 120V primary, 12V secondary magnetic transformer. Recommended 12V AC magnetic transformer (not included). Consult factory for dimming option.

Mounting Material: Anodized aluminum.

Mounting: Mounts to MP Lighting Dual Circuit rail system (sold separately). Standard 72” / 1829mm field adjustable coaxial cable. Longer custom length available.

Approval: Dry locations. Approved to US and Canadian standards by CSA.

Type:

Project:

Modified:

Quantity:

Notes:

DC = dual circuit

Shown with white opalescent glass shade (WH).

WH = white opalescent M = matte clear anodized

Code Mount Shade Color Input Voltage MountIng FInISh

P81L DC - WH -

1A = 12V AC2D = 24V DC

W20 = 2000KW27 = 2700KW30 = 3000KW35 = 3500KW41 = 4100K

Note: W20 has consistent binning that falls within 1.5 Macadam ellipse.

0° Spread: 35.6° 90° Spread: 35.0°

Center Beam FC Beam Width

3.0’

2.5’

2.0’

1.5’

1.0’

0.5’

1.9’

1.6’

1.3’

1.0’

0.6’

0.3’

1.9’

1.6’

1.3’

0.9’

0.6’

0.3’568

142

63.1

35.5

22.7

15.8

180°

90°

45°-45°

-90°

approx. 142 cdmax.

Illuminance at a DistanceP81L3000K Std181 lm

Polar Candela Distribution

Copyright © MP Lighting. All technical information in this document is subject to change. 01-2018

t 1.877.708.1184 f 604.708.1185 www.mplighting.com16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada

Photometric Data

Note: Various operating factors may cause differences between lab and field results. as specifications may change without notice, please refer to the led lamp Index located in the “downloads” section of each product webpage for the most current information.

lumen test results provided by led chip manufacturer

6W Glass Pendant

P81LDCSPEC SHEET

Ø3”Ø76mm

11-1/8”283mm

01-2018

t 1.877.708.1184 f 604.708.1185 www.mplighting.com16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada Copyright © MP Lighting. All technical information in this document is subject to change.

6W Glass Pendant

P81LSRSPEC SHEET

Application: Interior pendant.

Glass: Open top and bottom, cylinder shaped hand blown opalescent cased glass.

Source: 6 x 1W, 350mA LEDs.

LED Input Voltage: 12V AC or 24V DC Power Consumption: 8W

Power Supply: (not included) 24V DC - Powered by remote 120V primary, 350mA driver. Recommended TLDAV100W24V. Dimmable with 100W 24V driver and controller, 0~10V dimming. Consult factory. AC -Powered by remote 120V primary, 12V secondary magnetic transformer. Recommended 12V AC magnetic transformer (not included). Consult factory for dimming option.

Mounting Material: Anodized aluminum.

Mounting: Mounts to MP Lighting Single Rail system (sold separately). Standard 72” / 1829mm field adjustable coaxial cable. Longer custom length available.

Approval: Dry locations. Approved to US and Canadian standards by CSA.

Type:

Project:

Modified:

Quantity:

Notes:

SR = single rail

Shown with white opalescent glass shade (WH).

WH = white opalescent M = matte clear anodized

Code Mount Shade Color Input Voltage MountIng FInISh

P81L SR - WH -

1A = 12V AC2D = 24V DC

W20 = 2000KW27 = 2700KW30 = 3000KW35 = 3500KW41 = 4100K

Note: W20 has consistent binning that falls within 1.5 Macadam ellipse.

0° Spread: 35.6° 90° Spread: 35.0°

Center Beam FC Beam Width

3.0’

2.5’

2.0’

1.5’

1.0’

0.5’

1.9’

1.6’

1.3’

1.0’

0.6’

0.3’

1.9’

1.6’

1.3’

0.9’

0.6’

0.3’568

142

63.1

35.5

22.7

15.8

180°

90°

45°-45°

-90°

approx. 142 cdmax.

Illuminance at a DistanceP81L3000K Std181 lm

Polar Candela Distribution

Copyright © MP Lighting. All technical information in this document is subject to change. 01-2018

t 1.877.708.1184 f 604.708.1185 www.mplighting.com16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada

Photometric Data

Note: Various operating factors may cause differences between lab and field results. as specifications may change without notice, please refer to the led lamp Index located in the “downloads” section of each product webpage for the most current information.

lumen test results provided by led chip manufacturer

6W Glass Pendant

P81LSRSPEC SHEET

Ø3”Ø76mm

11-1/8”283mm

01-2018

t 1.877.708.1184 f 604.708.1185 www.mplighting.com16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada Copyright © MP Lighting. All technical information in this document is subject to change.

6W Glass Pendant

P81L1CTSPEC SHEET

Application: Interior pendant.

Electrical: 6 x 1W, 350mA LEDs. Powered by integral 120V primary, 350mA 12V AC or 24V DC driver.

LED Input Voltage: 12V AC or 24V DC Power Consumption: 8W Dimming: This fixture is not dimmable on the 1-Circuit Track System.

Mounting Material: Anodized aluminum.

Mounting: Easy to position and tighten. Installs on most 1-circuit track systems including Lightolier, Halo, Juno and 2-Wire.

Approval: Dry locations. Approved to US and Canadian standards by CSA.

Type:

Project:

Modified:

Quantity:

Notes:

FPO

WH = white opalescent

Shown with white opalescent glass shade (WH).

1CT = 1-circuit track

Code Mount traCk type Shade Color Input Voltage MountIng FInISh adaptor FInISh

P81L 1CT - WH -

1A = 12V AC2D = 24V DC

L = LightolierH = HaloJ = Juno2 = 2-wire

W= whiteB = black

M = matte clear anodizedB = black anodized

W27S = 2700K, std CRIW30S = 3000K, std CRIW35S = 3500K, std CRIW41S = 4100K, std CRIW20H = 2000K, high CRI W30H = 3000K, high CRI

Note: Standard CrI has a value of 75~82 while high CrI has 92.

W20h has consistent binning that falls within 1.5 Macadam ellipse.

0° Spread: 35.6° 90° Spread: 35.0°

Center Beam FC Beam Width

3.0’

2.5’

2.0’

1.5’

1.0’

0.5’

1.9’

1.6’

1.3’

1.0’

0.6’

0.3’

1.9’

1.6’

1.3’

0.9’

0.6’

0.3’568

142

63.1

35.5

22.7

15.8

180°

90°

45°-45°

-90°

approx. 142 cdmax.

Illuminance at a DistanceP81L3000K Std181 lm

Polar Candela Distribution

Copyright © MP Lighting. All technical information in this document is subject to change. 01-2018

t 1.877.708.1184 f 604.708.1185 www.mplighting.com16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada

Photometric Data

Note: Various operating factors may cause differences between lab and field results. as specifications may change without notice, please refer to the led lamp Index located in the “downloads” section of each product webpage for the most current information.

lumen test results provided by led chip manufacturer

6W Glass Pendant

P81L1CTSPEC SHEET

Ø3”Ø76mm

11-1/8”283mm

01-2018

t 1.877.708.1184 f 604.708.1185 www.mplighting.com16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada Copyright © MP Lighting. All technical information in this document is subject to change.

6W Glass Pendant

P81L3CTSPEC SHEET

Application: Indoor pendant for downlight illumination.

Electrical: 6 x 1W, 350mA LEDs. Powered by integral 120V primary, 12V AC or 24V DC driver.

LED Input Voltage: 12V AC or 24V DC Power Consumption: 8W Dimming: This fixture is not dimmable on the 3-Circuit Track System.

Mounting Material: Anodized aluminum.

Mounting: Easy to position and tighten. Install on MP 3-Circuit Track System (sold separately). 3-circuit switch selectable (circuit 1, 2, 3 or off). Low profile. Positive locking.

Approval: Dry locations. Approved to US and Canadian standards by CSA.

Type:

Project:

Modified:

Quantity:

Notes:

WH = white opalescent

Shown with white opalescent glass shade (WH).

3CT = 3-circuit track (silver adaptor finish)

M = matte clear anodizedB = black anodized

Code Mount Shade Color Input Voltage MountIng FInISh

P81L 3CT - WH -

2D = 24V DC1A = 12V AC

W22S = 2200K, 80+CRIW27S = 2700K, 80+CRIW30S = 3000K, 80+CRIW35S = 3500K, 80+CRIW41S = 4100K, 80+CRIW27H = 2700K, 90+CRIW30H = 3000K, 90+CRIW35H = 3500K, 90+CRI

0° Spread: 35.6° 90° Spread: 35.0°

Center Beam FC Beam Width

3.0’

2.5’

2.0’

1.5’

1.0’

0.5’

1.9’

1.6’

1.3’

1.0’

0.6’

0.3’

1.9’

1.6’

1.3’

0.9’

0.6’

0.3’568

142

63.1

35.5

22.7

15.8

180°

90°

45°-45°

-90°

approx. 142 cdmax.

Illuminance at a DistanceP81L3000K Std181 lm

Polar Candela Distribution

Copyright © MP Lighting. All technical information in this document is subject to change. 01-2018

t 1.877.708.1184 f 604.708.1185 www.mplighting.com16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada

Photometric Data

Note: Various operating factors may cause differences between lab and field results. as specifications may change without notice, please refer to the led lamp Index located in the “downloads” section of each product webpage for the most current information.

lumen test results provided by led chip manufacturer

6W Glass Pendant

P81L3CTSPEC SHEET