19
AS1000-M3 AS1000-M5 AS2000-01 AS2000-02 AS3000-02 AS3000-03 AS4000-02 AS4000-03 AS4000-04 AS5000-02 AS5000-03 AS5000-04 Model Port size Applicable cylinder bore size (mm) Effective area (mm 2 ) Effective area (mm 2 ) Flow rate ( /min (ANR)) Flow rate ( /min (ANR)) Weight (g) M3 x 0.5 M5 x 0.8 1/8 1/4 1/4 3/8 1/4 3/8 1/2 1/4 3/8 1/2 20 90 340 340 810 810 1,670 1,670 1,670 2,840 4,270 4,270 0.3 1.4 5.2 5.2 12.3 12.3 25.5 25.5 25.5 44 66 66 20 80 250 250 810 810 1,670 1,670 1,670 2,840 4,270 4,270 0.3 1.2 3.8 3.8 12.3 12.3 25.5 25.5 25.5 44 66 66 4.7 33 90 115 130 124 221 214 205 242 233 224 2.5, 4, 6 6, 10, 16, 20, 25 Air 1.5 MPa (1.05 MPa) 1 MPa (0.7 MPa) 0.05 MPa (0.1 MPa) –5 to 60°C (No freezing) 8 turns (10 turns) Free flow Controlled flow 20, 25, 32, 40 32, 40, 50, 63 40, 50, 63 80, 100 40, 50, 63 80, 100 Model/Flow Rate and Effective Area Note) Flow rate values are measured at 0.5 Mpa and 20°C. Note) ( ): Values for AS1000. Note) AS1000 with nipple: AS1000-M5-N Fluid Proof pressure note) Max. operating pressure note) Min. operating pressure note) Ambient and fluid temperature Number of needle rotations note) Specifications Accessory Description Part no. Applicable model Body size 1 2 3 4 5 M5 AS 1 000 Bore size Bore size Applicable series M3 M5 01 02 03 04 M3 x 0.5 M5 x 0.8 Rc 1/8 Rc 1/4 Rc 3/8 Rc 1/2 AS1000 AS1000 AS2000 AS2000/3000/4000/5000 AS3000/4000/5000 AS4000/5000 Thread type Nil Metric thread (M3, M5) Rc NPT G How to Order M-5N AS1000 Nipple N F Option H (1) L (2) Note 1) AS5000 is available as special. AS1000 is not applicable. Note 2) AS1000, AS2000 are not applicable. High temperature (–5 to 80°C) Low temperature (–30 to 60°C) Speed Controller: Standard Type Series AS In-line Type AS4000 AS2000 AS1000-M5 AS1000-M3 AS3000 JIS Symbol M3, M5 standard 1 8 8 3 2 1 2 1 1 4 , standard standard standard standard Caution Be sure to read before handling. Refer to pages 15-18-3 to 15-18-4 for Safety Instructions and Common Precautions on the products mentioned in this catalog, and refer to pages 15-8-6 to 15-8-8 for Precautions on every series. Compact size saves space. Speed may be accurately controlled even at low speeds. Constant speed easily set. Retainer prevents an accidental loss of needle. 15-9-28

Speed Controller: Standard Type Series AS NBR Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless

  • Upload
    lamdien

  • View
    233

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Speed Controller: Standard Type Series AS NBR Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless

AS1000-M3

AS1000-M5

AS2000-01

AS2000-02

AS3000-02

AS3000-03

AS4000-02

AS4000-03

AS4000-04

AS5000-02

AS5000-03

AS5000-04

Model Port sizeApplicable cylinder

bore size (mm)Effective area(mm2)

Effective area(mm2)

Flow rate(� /min (ANR))

Flow rate(� /min (ANR))

Weight(g)

M3 x 0.5

M5 x 0.8

1/8

1/4

1/4

3/8

1/4

3/8

1/2

1/4

3/8

1/2

20

90

340

340

810

810

1,670

1,670

1,670

2,840

4,270

4,270

0.3

1.4

5.2

5.2

12.3

12.3

25.5

25.5

25.5

44

66

66

20

80

250

250

810

810

1,670

1,670

1,670

2,840

4,270

4,270

0.3

1.2

3.8

3.8

12.3

12.3

25.5

25.5

25.5

44

66

66

4.7

33

90

115

130

124

221

214

205

242

233

224

2.5, 4, 6

6, 10, 16, 20, 25

Air

1.5 MPa (1.05 MPa)

1 MPa (0.7 MPa)

0.05 MPa (0.1 MPa)

–5 to 60°C (No freezing)

8 turns (10 turns)

Free flow Controlled flow

20, 25, 32, 40

32, 40, 50, 63

40, 50, 6380, 100

40, 50, 6380, 100

Model/Flow Rate and Effective Area

Note) Flow rate values are measured at 0.5 Mpa and 20°C.

Note) ( ): Values for AS1000.

Note) AS1000 with nipple: AS1000-M5-N

Fluid

Proof pressure note)

Max. operating pressure note)

Min. operating pressure note)

Ambient and fluid temperature

Number of needle rotations note)

Specifications

AccessoryDescription Part no. Applicable model

Body size12345

M5AS 1 000

Bore sizeBore size Applicable series

M3M501020304

M3 x 0.5M5 x 0.8Rc 1/8Rc 1/4Rc 3/8Rc 1/2

AS1000AS1000AS2000

AS2000/3000/4000/5000AS3000/4000/5000

AS4000/5000

Thread type

NilMetric thread (M3, M5)

RcNPT

G

How to Order

M-5N AS1000Nipple

NF

OptionH (1)

L (2)

Note 1) AS5000 is available as special. AS1000 is not applicable.

Note 2) AS1000, AS2000 are not applicable.

High temperature (–5 to 80°C)Low temperature (–30 to 60°C)

Speed Controller: Standard Type

Series AS In-line Type

AS4000

AS2000 AS1000-M5AS1000-M3

AS3000

JIS Symbol

M3, M5 standard1 8

83

21

21

1 4, standardstandardstandardstandard

CautionBe sure to read before handling. Refer to pages 15-18-3 to 15-18-4 for Safety Instructions and Common Precautions on the products mentioned in this catalog, and refer to pages 15-8-6 to 15-8-8 for Precautions on every series.

Compact size saves space. Speed may be accurately controlled even at low speeds. Constant speed easily set. Retainer prevents an accidental loss of needle.

15-9-28

Page 2: Speed Controller: Standard Type Series AS NBR Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless

Needle Valve/Flow Characteristics

Construction: AS1000-M3

Construction: AS1000-M5

No. Description Material Noteq

w

e

r

t

y

u

i

o

Body BBody NeedleLock nutHandleU sealNeedle guideO-ringO-ring

BrassBrassBrassBrassBrassHNBRBrassNBRNBR

Electroless nickel platedElectroless nickel platedElectroless nickel platedElectroless nickel platedElectroless nickel plated

Electroless nickel plated4.5 x 3 x 0.752.2 x 0.8 x 0.7

Component Parts

Component Parts

No. Description Material Part no.t

y

u

i

Valve seatU sealO-ringGasket

BrassHNBRNBRPVC

1429138142964

ø9 x ø7 x ø1M-5G1

Replacement Parts

No. Description Materialq

w

e

r

Body NeedleLock nutNipple

Zinc alloyStainless steel

BrassStainless steel

No. Description Material Noteo

!0

!1

!2

O-ringNeedle guideHandleE type snap ring

NBRBrassBrassSteel

Electroless nickel platedElectroless nickel platedBlack oxidized coated

∗ Electroless nickel plated

Flo

w r

ate l/m

in (

AN

R)

Effe

ctiv

e ar

ea (

mm

2 )

Inlet pressure: 0.5 MPa

Number of needle rotations

Flo

w r

ate l/m

in (

AN

R)

Effe

ctiv

e ar

ea (

mm

2 )Inlet pressure: 0.5 MPa

Number of needle rotations

Flow

rate

l/m

in (A

NR

)

Inlet pressure: 0.5 MPa

Number of needle rotations

Flo

w r

ate l/m

in (

AN

R)

Effe

ctiv

e ar

ea (

mm

2 )Inlet pressure: 0.5 MPa

Number of needle rotations

Flo

w r

ate l/m

in (

AN

R)

Flo

w r

ate l/m

in (

AN

R)

Effe

ctiv

e ar

ea (

mm

2 )

Effe

ctiv

e ar

ea (

mm

2 )

Effe

ctiv

e ar

ea (

mm

2 )

Inlet pressure: 0.5 MPa

Number of needle rotations

Inlet pressure: 0.5 MPa

Number of needle rotations

15-9-29

Series ASSpeed Controller: Standard TypeIn-line Type

AS

ASP

ASN

AQ

ASV

AK

ASS

ASR

ASF

Page 3: Speed Controller: Standard Type Series AS NBR Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless

Construction: AS4000

Construction: AS5000

Construction: AS2000/3000

No. DescriptionModel

Body Needle ∗

Lock nut ∗

ValveO-ringSpring

Zinc alloyBrassBrass

Aluminum alloyBrass

Carbon steel

Component Parts

Component Parts

Component Parts

Replacement Parts

q

w

r

No. DescriptionModel

143022143021143023

142831428414282

e

t

y

No. Description Material NoteBody CapCross-recessed head cap screwE type snap ringHandleRingLock nutNeedleO-ring

Aluminum alloyRolled steelSteel wire

Stainless steelZinc alloySteel wireZinc alloy

Aluminum alloyNBR

ChromatedZinc chromated

4 x 0.7 x 8JIS B 2805 Nominal 6Black zinc chromate plated

∗ Electroless nickel plated

q

w

e

r

t

y

u

i

!2

Zinc chromated

143112

ValveSpringO-ring

Replacement PartsNo. Description Material Parts no.

Stainless steelNBR

143145143146143147

NBR, Brasso

!0

!11

No. Description Material NoteBody CapCross-recessed head cap screwE type snap ringHandleRingLock nutNeedleO-ring

Aluminum alloyRolled steelSteel wire

Stainless steelZinc alloy

Stainless steelZinc alloy

Aluminum alloyNBR

ChromatedNickel plated

M4 x 0.7 x 8 Nickel platedJIS B 2805 Nominal 6

Chromated

q

w

e

r

t

y

u

i

!2

ChromatedChromated

JIS B 2401 P12

ValveSpringSeal

Replacement PartsNo. Description Material Parts no.

Stainless steel

NBR

141431414414147

NBR, Stainless steelo

!0

!1

AS2000 AS3000

AS2000 AS3000

Series AS

15-9-30

Page 4: Speed Controller: Standard Type Series AS NBR Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless

Dimensions: AS1000-M3

Dimensions: AS2000/3000

Dimensions: AS1000-M5

Dimensions: AS4000

Dimensions: AS5000

Dimensions

Max. Min.L1 L2 L3 L4 L5 L6

L7L8 DModel Bore size

AS2000-01AS2000-02AS3000-02, 03

Rc Rc

Rc ,

404056

303045.5

555.25

172325

1011.513.2

15.51720.6

54.55668

5051.561

162026

4.54.55.5

1 8

83

1 41 4

Male M5 x 0.8Female M5 x 0.8

2-port size

Effective thread depth 6

2-1/4 to 1/2

2-M4 x 0.7 Effective thread depth 7

2-1/4 to 1/2

15-9-31

Series ASSpeed Controller: Standard TypeIn-line Type

AS

ASP

ASN

AQ

ASV

AK

ASS

ASR

ASF

Page 5: Speed Controller: Standard Type Series AS NBR Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless

JIS Symbol How to Order

Thread typeRc

NPTG

NilNF

Material for handleResinMetal

Nil2

Port size1/43/8

0203

02AS3500

Caution

Specifications

Port size

Applicable cylinder bore size (mm)

Proof pressure

Max. operating pressure

Min. operating pressure

Ambient and fluid temperature

Number of needle rotation

Weight

Free flow

Controlled flow

Flow rate (�/min (ANR))

Effective area (mm2)

Flow rate (�/min (ANR))

Effective area (mm2)

40, 50, 63

1.5 MPa

1 MPa

0.05 MPa

–5 to 60°C (No freezing)

8 turns

130 g (Metallic handle: 140 g)

810

12.3

810

12.3

Model Resin handle

Metal handle

Model/Specifications

1/4 3/8

AS3500-02

AS3500-02-2

AS3500-03

AS3500-03-2

Note) Flow rate values are measured at 0.5 MPa and 20°C.

Needle Valve/Flow Characteristics AS3500

Metal handleResin handle

Speed Controller: Standard Type

Series AS In-line Push Locking Type

Lock speed setting, with the touch of a buttonIt can be locked only by pushing the handle after adjustment.

Convenient opening indication scaleThe opening indication scale for the needle valve is provided on the handle to facilitate speed adjustments.

Easy speed control at low flow volume rangesPossible to control the mass velocityConstant handle constructed of metal to withstand heavy usage In addition to the standard handle made of resin, a heavy-duty metal handle is also available.

Retainer prevents an accidental loss of needle

Be sure to read before handling. Refer to pages 15-18-3 to 15-18-4 for Safety Instructions and Common Precautions on the products men-tioned in this catalog, and refer to pages 15-8-6 to 15-8-8 for Precau-tions on every series.

Flo

w r

ate

(�/m

in (

AN

R))

Effe

ctiv

e ar

ea (

mm

2 )

Inlet pressure: 0.5 MPa

Number of needle rotations

15-9-34

Page 6: Speed Controller: Standard Type Series AS NBR Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless

AS

ASP

ASN

AQ

ASV

AK

ASS

ASR

ASF

Speed Controller: Standard TypeIn-line Push Locking Type

15-9-35

Series AS

Construction

Component PartsNo. Description NoteMaterial

Dimensions

Replacement Parts

Body ValveCapNeedle

q

w

e

r

t

y

Handle

Aluminum alloyNBR

Rolled steelBrassPOM

Zinc alloy

Chromate plated

Electroless nickel plated

BlackBlack

No. Part no.Material14284NBR

DescriptionO-ring

Page 7: Speed Controller: Standard Type Series AS NBR Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless

Speed Controller: Standard Type

Series AS Large Flow In-line Type

Caution

AS420-02

AS420-03

AS420-04

AS500-06

AS600-10

AS800-12

AS900-14

AS900-20

ModelPortsize

Applicablecylinder

bore size (mm)Effective

area (mm2)Effective

area (mm2)Flow rate

(� /min (ANR))Flow rate

(� /min (ANR))

Weight(g)

2,500

5,000

6,600

10,100

15,100

35,400

52,000

57,800

38

77

100

154

230

540

792

880

3,600

4,800

6,700

8,100

16,900

38,500

47,500

60,800

55

74

102

123

258

586

724

926

0.36

0.7

1.4

3.3

3.3

63, 80, 100, 125

Free flow Controlled flow

160, 180, 200, 250

140, 160, 180, 200

Model

Note) Flow rate values are measured at 0.5 MPa and 20°C.

300

0.34

0.33

0.32

1/4

3/8

1/2

3/4

1

1

1

2

1 4

1 2

Air

1.5 MPa

1 MPa

0.05 MPa

–5 to 60°C (No freezing)

10 turns (12 turns Note))Note) ( ): Values for AS800, AS900.

Fluid

Proof pressure

Max. operating pressure

Min. operating pressure

Ambient and fluid temperature

Number of needle rotations

Specifications

Body size4250608090

AS 42 0

Bore sizeBore size Applicable series

0203040610121420

1/43/81/23/41

1 1 2

1 41 2

AS500AS600AS800

AS420

AS900

Thread typeNil Rc

NPTG

How to Order

Needle Valve/Flow Characteristics

NF

02Option

H (1)

L (2)

Note 1) AS800 is available as special.Note 2) AS900 is available as special.

High temperature (–5 to 80°C)Low temperature (–30 to 60°C)

Nil None

JIS Symbol

Be sure to read before handling. Refer to pages 15-18-3 to 15-18-4 for Safety Instructions and common precautions on the products mentioned in this catalog, and refer to pages 15-8-6 to 15-8-8 for Precautions on every series.

Flo

w r

ate

(�/m

in (

AN

R))

Effe

ctiv

e ar

ea (m

m2 )

Inlet pressure: 0.5 MPa

Number of needle rotations

Flo

w r

ate

(�/m

in (

AN

R))

Effe

ctiv

e ar

ea (m

m2 )

Inlet pressure: 0.5 MPa

Number of needle rotations

Flo

w r

ate

(�/m

in (

AN

R))

Effe

ctiv

e ar

ea (m

m2 )

Inlet pressure: 0.5 MPa

Number of needle rotations

AS500/600AS420 AS800/900

1/2 standard3/4 standard1 standard

1 1/4 standard1 1/2 standard

AS900

AS420

AS600

AS500

AS800

Able to control and set a constant speed easily. Speed may be accurately controlled even at low speed. Retainer prevents accidental loss of needle.

15-9-32

Page 8: Speed Controller: Standard Type Series AS NBR Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless

Construction: AS420/500/600 Construction: AS800/900

Dimensions: AS420/500/600 Dimensions: AS800/900

Component PartsNo. Material NoteDescription

Body NeedleBottom coverHandle

Aluminum alloyBrass

Aluminum alloyZinc alloy

Chromated

ChromatedBlack painted

q

w

e

r

Component PartsNo. Description Material Note

Body Valve guideCheck valveNeedleHandle

Aluminum alloyAluminum alloy

BrassBrass

Carbon steel

ChromatedChromated

Rubber lining

q

w

e

r

t

Replacement Parts

No. DescriptionPart no.

1425414255

1427314275

JIS B 2401P-7

JIS B 2401P-48

JIS B 2401P-7

JIS B 2401P-38

AS420-500 AS600t

y

u

i

Check ValveSpring

O-ring

O-ring

Material

BrassStainless steel

NBR

NBR

Chromated

Replacement Parts

No.

O-ringO-ringSpring

Description Material

NBRNBR

Stainless steel

Part no.

JIS B 2401 P-12JIS B 2401 G-50

14115

JIS B 2401 P-16JIS B 2401 G-65

14124

AS800 AS900y

u

i

Dimensions

Model Port size

67.57490

AS420AS500AS600

1/4, 3/8, 1/23/41

384255

122115158

112105148

505062

L1 L2 DMin.

L3Max.

Dimensions

Model Port size

120150

AS800AS900

1 1 , 2

7493

204262

192250

8094

L1 L2 L4Min.

L3Max.

1 41 2

2-Port size2-Port size

15-9-33

Series ASSpeed Controller: Standard TypeLarge Flow In-line Type

AS

ASP

ASN

AQ

ASV

AK

ASS

ASR

ASF

Page 9: Speed Controller: Standard Type Series AS NBR Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless

Speed Controller: Standard Type

Series ASElbow Type (Metal Body)

JIS Symbol

10-32UNFPort size

Applicable cylinder bore size (mm)

Proof pressure

Max. operating pressure

Min. operating pressure

Ambient and fluid temperature

Number of needle rotation

Option

Weight (g)

Controlled flow(Free flow)

Flow rate � /min (ANR)

Effective area (mm2)

AS1200-M3 AS1400-M3 AS12�0-M5 AS22�0-01 AS22�0-02 AS32�0-03 AS42�0-04

M5 x 0.8 1/8 1/4

20, 25, 32, 40

3/8

32, 40, 50, 63

1/2

6, 10, 15, 20, 25 80, 100

AS12�0-U10/32Specifications

Model/SpecificationsModel

1.5 MPa

1 MPa

0.1 MPa

–5 to 60°C (No freezing)

10 turns 10 turns8 turns

— Hexagonal lock nut With seal, Hexagonal lock nut, Nickel plated

18110664291063

20

0.3

1700

26

920

14

460

7

230

3.5

105

1.6Note 1) Flow rate values are measured at 0.5 MPa and 20°C.Note 2) Meter-in type not available on AS1200-M3, AS1400-M3. Note 3) Distinction between meter-out/meter-in types by appearance.

Those are distinguished by the lock nut. The meter-out type is electroless nickel plated, while the meter-in type is black zinc chromate plated.

Note 4) AS1200, AS1400, AS22�0 are electroless nickel plated as standard. (N specifications)

How to Order

01 SAS 2 2 0 0Body size1234

M3, M5 standard1 8

83

21

1 4

TypeDirect cylinder

elbow type

Direct cylinderflat elbow type

2

4

Control typeMeter-outMeter-in

01

Option

Bore size

SKN

NoneWith seal

Nil

Symbol Bore sizeApplicable

series

M3

M5U10/32

01020304

M3 x 0.5

M5 x 0.810-32UNF

1/81/43/81/2

AS1200-M3AS1400-M3

AS12�0-M5AS12�0-U10/32

AS22�0-01AS22�0-02AS32�0-03AS42�0-04

Hexagonal lock nutElectroless nickel plated

M3 x 0.5

2.5, 4, 6

1.05 MPa

0.7 MPa

0.1 MPa

P.15-11-3

AS1200-M5

AS2200-02AS2200-01

AS4200-04

AS3200-03

Minimizes installation time and costFittings and tubing are not necessary because this type screws directly into the actuator. Thus, piping labor and cost can be eliminated.

Body swivels 360°Swivel type allows free setting of piping.

Speed may be accurately controlled even at low speeds. Able to control and set a constant speed easily. Retainer prevents accidental loss of needle.

, standardstandardstandard

AS1400-M3

AS1200-M3

∗ If more than one option isrequired, write option partnumbers in the order of“S”, “K”, “N”.

Thread type

∗ Male thread comes with R thread.

Nil

Symbol

Metric thread (M3, M5)Unified thread (10-32UNF)

NPTNG ∗F

Cylinder sideR

Tube sideRc

15-9-24

Page 10: Speed Controller: Standard Type Series AS NBR Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless

Needle Valve/Flow Characteristics

Flo

w r

ate

(�/m

in (

AN

R))

Effe

ctiv

e ar

ea (

mm

2 )

Inlet pressure: 0.5 MPa

Number of needle rotations

Flo

w r

ate

(�/m

in (

AN

R))

Effe

ctiv

e ar

ea (

mm

2 )

Inlet pressure: 0.5 MPa

Number of needle rotations

Flo

w r

ate

(�/m

in (

AN

R))

Effe

ctiv

e ar

ea (

mm

2 )

Inlet pressure: 0.5 MPa

Number of needle rotations

Flo

w r

ate

(�/m

in (

AN

R))

Effe

ctiv

e ar

ea (

mm

2 )

Inlet pressure: 0.5 MPa

Number of needle rotations

Flo

w r

ate

(�/m

in (

AN

R))

Effe

ctiv

e ar

ea (

mm

2 )

Inlet pressure: 0.5 MPa

Number of needle rotations

Flo

w r

ate

(�/m

in (

AN

R))

Effe

ctiv

e ar

ea (

mm

2 )

Inlet pressure: 0.5 MPa

Number of needle rotations

AS1200-M3, AS1400-M3 AS12�0-M5, AS12�0-U10/32 AS22�0-01

AS22�0-02 AS32�0 AS42�0

CautionBe sure to read before handling. Refer to pages 15-18-3 to 15-18-4 for Safety Instructions and Common Precautions on the products mentioned in this catalog, and refer to pages 15-8-6 to 15-8-8 for Precautions on every series.

15-9-25

Series ASSpeed Controller: Standard TypeElbow Type (Metal Body)

AS

ASP

ASN

AQ

ASV

AK

ASS

ASR

ASF

Page 11: Speed Controller: Standard Type Series AS NBR Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless

Construction: AS1400-M3Construction: AS1200-M3, AS12�0-M5, AS22�0/32�0/42�0

AS2210, 3210, 4210

No. Description Material Note

q

w

e

r

t

y

u

i

o

!0

!1

!2

Body B

Body A

Needle

Lock nut

Handle

U seal

Needle guide

O-ring

O-ring

Steel ball

Gasket

Joint

Brass

Brass

Brass

Brass

Brass

HNBR

Brass

NBR

NBR

Chromium bearing steel

PVC

Brass

Electroless nickel plated

Electroless nickel plated

Electroless nickel plated

Electroless nickel plated

Electroless nickel plated

Electroless nickel plated

Electroless nickel plated

No. Description Material Note

q

w

e

r

t

y

u

i

o

!0

!1

!22

!3

Body A

Handle

Body B

Needle

Needle guide

Seat ring

Lock nut

U seal

O-ring

O-ring

O-ring

Bushing

O-ring

Zinc alloy

Brass

Brass

Brass

Brass

Brass

Brass(2)

NBR

NBR

NBR

NBR

PBT

NBR

PVC

NBR, Stainless steel

Electroless nickel plated

Electroless nickel plated

Electroless nickel plated

Electroless nickel plated

Electroless nickel plated(3)

Component Parts

Component Parts

!4 Gasket

01 to 04 type

01 to 04 type

M3 type

M5, U10/32 type

Note 1) AS22�0 type is electroless nickel plated.Note 2) AS22�0 type is made of steel.Note 3) Meter-in type is black zinc chromate plated.

(1)

AS2200, 3200, 4200Meter-out typeAS1200-M3, M5, U10/32

Meter-in typeAS1210-M5, U10/32

Series AS

15-9-26

Page 12: Speed Controller: Standard Type Series AS NBR Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless

Dimensions: AS-1200-M3, AS12�0-M5, AS22�0, 32�0, 42�0Dimensions: AS1400-M3

AS1200-M3AS12�0-M5AS12�0-U10/32

AS22�0, 32�0, 42�0

Dimensions

M3 x 0.5 M3 x 0.5 4.5 6.6 23.5 21.5 8 5 5 20.5 18.5

Max. Min. Max. Min.L1

L2 A(2)

L3H(1)T2T1 D1 D2Model

M5 x 0.8

10-32 UNF

1/8

1/4

3/8

1/2

M5 x 0.8

10-32 UNF

1/8

1/4

3/8

1/2

8 10 28.3 10.3 9 9 25 22.2

12 (12.7)

17 (17.5)

19

24 (23.8)

18

27.2

30

38.5

36.4

40.8

46.9

55.6

25.5

31.4

35.8

41.9

50.6

14.1

18

20.8

26.7

14.3

18

22.5

27.5

14.6

19.5

24.3

28.5

32.4

34.8

40.6

47.4

27.4

29.8

35.6

42.4

Note 1) ( ) are the dimensions of “NPT” thread. Note 2) Reference thread dimensions after installation.

AS1200-M3

AS1200-M5

AS1200-U10/32

AS22�0-01

AS22�0-02

AS32�0-03

AS42�0-04

(Hexagon width across flats)

(Hexagon width across flats)

15-9-27

Series ASSpeed Controller: Standard TypeElbow Type (Metal Body)

AS

ASP

ASN

AQ

ASV

AK

ASS

ASR

ASF

Page 13: Speed Controller: Standard Type Series AS NBR Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless

Model/ Specifications

How to Order

Tamper Proof Speed ControllerStandard Type

Series AS�2�0-TElbow Type (Metal Body)

JIS Symbol

1/410-32 UNFPort size

Applicable cylinder bore size (mm)

Fluid

Proof pressure

Max. operating pressure

Min. operating pressure

Ambient and fluid temperature

Number of needle rotations

Flow rate (l/min (ANR))

Effective area (mm2)

AS42�0-�04

1/8 1/4 3/8

32, 40, 50, 63

1/2

80, 10020, 25, 32, 406, 10, 16, 20, 25

AS12�0-M5 AS12�0-U10/32Specifications Model

Air

1.5 MPa

1 MPa

0.1 MPa

–5 to 60°C (No freezing)

10 turns8 turns

105

1.6

1700

26

920

14

460

7

230

3.5

Note 1) Flow rate values are measured at 0.5 MPa and 20°C.Note 2) Meter-out and meter-in types can be visually differentiated by the flow direction symbol on the resin body. Note 3) Brass parts are all electroless nickel plated, provided as standard.

M5 x 0.8

AS22�0-�01 AS32�0-�03AS32�0-�02AS22�0-�02

01 SAS 2 0 0

Body size1234

M5 standard1/8, 1/4 standard

3/8 standard1/2 standard

2

TypeElbow2

Control01

T

Port sizeSymbol Cylinder side In the side of solenoid valve

M501020304

F01F02F03F04

U10/32N01N02N03N04

M5 x 0.8R 1/8R 1/4R 3/8R 1/2R 1/8R 1/4R 3/8R 1/2

10-32 UNFNPT 1/8NPT 1/4NPT 3/8NPT 1/2

M5 x 0.8Rc 1/8Rc 1/4Rc 3/8Rc 1/2G 1/8G 1/4G 3/8G 1/2

10-32 UNFNPT 1/8NPT 1/4NPT 3/8NPT 1/2

Meter-outMeter-in

Tamper proof Note) Speed controller

requires a special tool for flow adjustment. Order separately with part number, AS-T-1.

With sealNote) When connecting port is either M5

or 10-32 UNF thread, it is not available with seal. With gasket is provided as standard.

Controlled flow(Free flow)

15-9-104

Page 14: Speed Controller: Standard Type Series AS NBR Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless

Flo

w r

ate l/m

in (

AN

R)

Effe

ctiv

e ar

ea (

mm

2 )

Inlet pressure: 0.5 MPa

Number of needle rotations

Flo

w r

ate l/m

in (

AN

R)

Effe

ctiv

e ar

ea (

mm

2 )

Inlet pressure: 0.5 MPa

Number of needle rotations

Flo

w r

ate l/m

in (

AN

R)

Effe

ctiv

e ar

ea (

mm

2 )

Inlet pressure: 0.5 MPa

Number of needle rotations

Flo

w r

ate l/m

in (

AN

R)

Effe

ctiv

e ar

ea (

mm

2 )

Inlet pressure: 0.5 MPa

Number of needle rotations

Flo

w r

ate l/m

in (

AN

R)

Effe

ctiv

e ar

ea (

mm

2 )

Inlet pressure: 0.5 MPa

Number of needle rotations

Needle Valve/Flow Characteristics

Construction

Component PartsNo. Description Material Note

Electroless nickel plated

Electroless nickel plated

Electroless nickel plated

q

w

e

r

t

y

u

Body A

Body B

Needle

Seat ring

Spring

U seal

O-ring

Zinc alloy

Brass

Brass

Brass

Steel wire

HNBR

NBR

No. Description Material Note

i

o

!0

!1

!2

!3

O-ring

O-ring

Bushing

O-ring

Gasket

Retaining ring for hole type C

NBR

NBR

PBT

NBR

NBR, Stainless steel

Tool steel

AS3200-02

AS3210-02

Meter-out typeM5 typeU10/32 port

Meter-in typeM5 typeU10/32 port

!3

e

t

w

o

u

!4

y

q

!2

w

e

t

o

u

q

!4

!1

!0

i

y

r

e

t

r

i

!0

q

y

!3

!2

!1

o

w

u

15-9-105

Tamper Proof Speed ControllerStandard Type, Elbow Type (Metal Body)

AS

ASP

ASN

AQ

ASV

AK

ASS

ASR

ASF

Page 15: Speed Controller: Standard Type Series AS NBR Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless

Dimensions

L2

øD

1

øD2

L3

A

T2

T1L1

H

L4

øD3

∗ Reference thread dimensions after installation.

Dimensions

AS42�0-N04-ST NPT 1/2NPT 1/2AS42�0-F04-ST G 1/2AS42�0-04-ST Rc 1/2R 1/2

AS32�0-N03-ST NPT 3/8NPT 3/8AS32�0-F03-ST G 3/8AS32�0-03-ST Rc 3/8R 3/8

AS32�0-N02-ST NPT 1/4NPT 1/4AS32�0-F02-ST G 1/4AS32�0-02-ST Rc 1/4R 1/4

AS22�0-N02-ST NPT 1/4NPT 1/4AS22�0-F02-ST G 1/4AS22�0-02-ST Rc 1/4R 1/4

AS22�0-N01-ST NPT 1/8NPT 1/8AS22�0-F01-ST G 1/8AS22�0-01-ST Rc 1/8R 1/8

AS12�0-U10/32-T 10-32 UNF10-32 UNFAS12�0-M5-T M5 x 0.8M5 x 0.8

Model T2 H D1T1 D2 D3 L1 L2 L3 L4 A∗

(He(Hexagon width across flats)xagon width across flats)(Hexagon width across flats)

23.8

24 27.5

19 22.5

19 22.5

17.5

17 18

12.7

12 14.3

8 9

28.5

24.3

24.3

19.5

14.6

9

12

9.5

9.5

7

7

4.5

38.5

30

30

27.2

18

10

63.8

53.7

55.3

40.7

35.6

31

26.7

20.8

22.4

18

14.1

10.3

1.5

1.5

1.5

1.5

1.5

0.7

55.8

47.4

49.3

36.7

31.6

27.4

15-9-106

Page 16: Speed Controller: Standard Type Series AS NBR Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless

Model/Specifications

How to Order

Speed Controller Adjustable by Flat Head Screwdriver: Standard Type

Series AS�2�0-DElbow Type (Metal Body)

JIS Symbol

1/410-32 UNFPort size

Applicable cylinder bore size (mm)

Fluid

Proof pressure

Max. operating pressure

Min. operating pressure

Ambient and fluid temperature

Number of needle rotations

Effective area (mm2)

1/8 1/4 3/8

32, 40, 50, 63

1/2

80, 10020, 25, 32, 406, 10, 16, 20, 25

AS12�0-M5 AS12�0-U10/32Specifications Model

Air

1.5 MPa

1 MPa

0.1 MPa

–5 to 60°C (No freezing)

105

1.6

1700

26

920

14

460

7

230

3.5

Note 1) Flow rate values are measured at 0.5 MPa and 20°C.Note 2) Meter-out and meter-in types can be visually differentiated by the flow direction symbol on the resin body. Note 3) Brass parts are all electroless nickel plated, provided as standard.

01 SAS 2 0 0

Body size1234

M5 standard1/8,1/4 standard3/8 standard1/2 standard

2

TypeElbow2

Control01

D

Type adjustable by flat head screwdriver

Port sizeSymbol Cylinder side In the side of solenoid valve

M501020304

F01F02F03F04

U10/32N01N02N03N04

M5 x 0.8R 1/8R 1/4R 3/8R 1/2R 1/8R 1/4R 3/8R 1/2

10-32 UNFNPT 1/8NPT 1/4NPT 3/8NPT 1/2

M5 x 0.8Rc 1/8Rc 1/4Rc 3/8Rc 1/2G 1/8G 1/4G 3/8G 1/2

10-32 UNFNPT 1/8NPT 1/4NPT 3/8NPT 1/2

M5 x 0.8

Flow rate (l/min (ANR))

AS42�0-�04AS32�0-�03AS32�0-�02AS22�0-�02AS22�0-�01

Meter-outMeter-in

10 turns8 turns

Controlled flow(Free flow)

With sealNote) In case that connecting port is

either M5 or 10-32 UNF thread, it is not available with seal. With gasket is provided as standard.

15-9-89

AS

ASP

ASN

AQ

ASV

AK

ASS

ASR

ASF

Page 17: Speed Controller: Standard Type Series AS NBR Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless

No. Note

Electroless nickel platedElectroless nickel platedElectroless nickel plated

DescriptionBody ABody BNeedleSeat ringSpringU sealO-ringO-ringO-ring

O-ringBushing

GasketRetaining ring for hole type C

MaterialZinc alloy

BrassBrassBrass

Steel wireHNBRNBRNBRNBR

NBRPBT

NBR, Stainless steelTool steel

Component Parts

Construction

AS3210-02-D

AS3200-02-D

AS2210-01-D

AS2200-01-DMeter-outM5 typeU10/32 port

Meter-outM5 typeU10/32 port

15-9-90

Page 18: Speed Controller: Standard Type Series AS NBR Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless

DimensionsL2

øD

1

øD2

L3

A

T2

T1L1

H

(Hexagon width across flats)

L4

øD3

∗ Reference thread dimensions after installation.

Dimensions

AS42�0-N04-SD NPT 1/2 23.8NPT 1/2AS42�0-F04-SD G 1/2AS42�0-04-SD Rc 1/2 24

R 1/2

AS32�0-N03-SD NPT 3/8NPT 3/8AS32�0-F03-SD G 3/8AS32�0-03-SD Rc 3/8

19 R 3/8

AS32�0-N02-SD NPT 1/4NPT 1/4AS32�0-F02-SD G 1/4AS32�0-02-SD Rc 1/4

19 R 1/4

AS22�0-N02-SD NPT 1/4 17.5NPT 1/4AS22�0-F02-SD G 1/4AS22�0-02-SD Rc 1/4 17 R 1/4

AS22�0-N01-SD NPT 1/8 12.7NPT 1/8AS22�0-F01-SD G 1/8AS22�0-01-SD Rc 1/8 12 R 1/8

AS12�0-U10/32-D 10-32 UNF10-32 UNFAS12�0-M5-D M5 x 0.8 8

M5 x 0.8Model T2 H D1T1 D2 D3 L1 L2 L3 L4 A ∗

9

14.3

18

22.5

22.5

27.5

9

14.6

19.5

24.3

24.3

28.5

4.7

7.2

7.2

9.8

9.8

12.4

31

35.6

40.7

55.3

53.7

63.8

10.3

14.1

18

22.4

20.8

26.7

0.7

1.2

1.2

1.2

1.2

1.2

27.4

31.6

36.7

49.3

47.4

55.8

10

18

27.2

30

30

38.5

15-9-91

Speed Controller Adjustable by Flat Head ScrewdriverStandard Type, Elbow Type (Metal Body)

AS

ASP

ASN

AQ

ASV

AK

ASS

ASR

ASF

Page 19: Speed Controller: Standard Type Series AS NBR Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless nickel plated Electroless

1. Products mentioned in this catalog are not designed for the use as stop valve with zero air leakage. A certain amount of leakage is allowed in the product's specifi-cations.

Precautions

1. Check that the lock nut is tightened. A loose lock nut may cause actuator speed changes.

2. Confirm the degree of rotation of the needle valve. Products mentioned in this catalog are retainer type so that the needle is not removed completely. Over rotation will cause damage.

3. Do not use tools such as pliers to rotate the handle.It can cause idle rotation of the handle or damage.

4. Confirm air flow direction. Mounting backwards is dangerous, because the speed adjustment needle will not work and the actuator may lurch suddenly.

5. Adjust needle by opening the needle slowly after having closed it completely. Loose needle valves may cause unexpected sudden actuator extension. When needle valve is turned clockwise, it is closed and cylinder speed decreases. When needle valve is turned counter clockwise, it is open and cylinder speed increases.

6. Do not apply excessive force or shock to the body or fittings with an impact tool.It can cause damage or air leakage.

1. Confirm that PTFE can be used in application. PTFE powder (Polytetrafluoroethylene resin) is included in the seal material. Confirm if the use of it may cause any adverse effect in the system.

1. To install/remove the Flow Control Equipment, tighten/loosen at wrench flat B as close to the thread as possible using the appropriate wrench. Do not apply torque at other points as the product may be damaged. Rotate Body A manually for positioning after installation.

2. Do not use universal type fittings for applications involving continuous rotation. The fitting section may be damaged.

Series AS-F/FE/FG/FM

1. The tightening torque for pipe fittings is as shown in the table. As a rule, they should be tightened 2 to 3 turns with a tool after first tightening by hand. Be careful not to cause damage by over-tightening.

Male thread Suitable screw torque(N·m)

Hexagon widthacross flats

(mm)Adjustable spanner

nominal (mm)

M3

M510/32-UNF

1/8

1/4

3/8

1/2

1/4

1/6 turn afterhand tightening

7 to 9

12 to 14

22 to 24

28 to 30

4.5

8

14

17

21

24

100

150

200

200

200

1. Suitable screw torque for a hexagon lock nut is shown in the table below. For standard installation, turn 15 to 30° using tool, after fastening by hand. Pay attention not to over torque the product.

Suitable screw torque(N·m)

0.07

0.3

1

1.5

4

10

Body size

M3

M5

1/8

1/4

3/8

1/2

Selection

Mounting

Selection

Mounting

Tightening Torque

Lock Nut Tightening Torque

Warning

Warning

Warning

Warning

Caution

Caution

Flow Control Equipment PrecautionsBe sure to read before handling. Refer to pages 15-18-3 to 15-18-4 for Safety Instructions and Common Precautions on the products mentioned in this catalog, and refer to main text for more detailed precautions on every series.

15-8-6