TEL: 1.800.258.7324 (252.447.7155)FAX: 1.800.892.3273 (252.447.5502)

Tandemloc designs, manufactures and tests lifting, securing and mobilizing components for all industries. See our website for details and important safety information.

Email: 824 Highway 101 • Havelock, NC 28532info@tandemloc.com • www.tandemloc.com

Read all safety labels and instructions prior to use. Product to be used by qualified personnel only.

To avoid lifter failure, potential death and property damage, never exceed WLL (Working Load Limit)This document contains the proprietary information of Tandemloc, Inc. and your access and use shall be, and is at all times, pursuant to and limited by the Tandemloc, Inc. Terms of Use.You shall not, and shall not encourage, assist, or authorize another party to copy, distribute, publically display, modify, reverse engineer,decompile, or take any other action to reproduce or replicate this document or the information contained herein. © Copyright 2012 by Tandemloc, Inc.Dimensions are subject to manufacturing tolerance and change.

20' AUTOLOC SPREADER (N31000C-1PA)Cage Code: 65059 | Drawing No: SN31000C-1PA | Revision: -- | Sheet: 1 of 2

UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHESSEE ELECTRONIC PARTS LIST FOR BILL OF MATERIALS

DO NOT SCALE DRAWING

NOTES:1. PART NO.: N31000C-1PA, 20’ AUTOLOC SPREADER2. SWL 70,528 LB.3. PROOF TESTED TO 125% (88,160 LB.) AND CERTIFIED4.

6. AUTO ACTUATED SPREADER UNLOCKS WHEN SPREADER IS FIRST LIFTEDTHEN LOCKS WHEN LOWERED AND LIFTED AGAIN, ALTERNATING WITHEACH CYCLE. SHOWN IN LOCKED POSITION

7. FINISH: SANDBLAST, PRIME AND PAINT SAFETY YELLOW8. CALCULATED WEIGHT: 3,200 LB. SPREADER, SLINGS AND FLIPPER GUIDES9. DETAILED INFORMATION ON LISTED OPTIONS IS AVAILABLE UPON REQUEST

STANDARD SPECIFICATION # EAD2100A APPLIES5. SPREADER MEETS OR EXCEEDS AISC FATIGUE LIFE OF 600,000 CYCLES

INDICATOR FLAGS LOCATED ATEACH CORNER PROVIDEPOSITIVE VISUAL CUE OF LOCKEDOR UNLOCKED SPREADER. FLAGSATTACHED DIRECTLY TO BAYONETS

2" MASTER RINGINSIDE DIMENSIONS

14.00 X 7.00LOCATED 136.5" ABOVE

SPREADER CORNER FITTINGS

DETAIL A

CELL GUIDE WHEELSFOR EACH CORNERARE STANDARD

TWISTLOCK BAYONET(SHOWN LOCKED)DESIGNED FOR TOPAPERATURE IN STANDARDISO 1161 CORNER FITTING

SEE DETAIL A

TEL: 1.800.258.7324 (252.447.7155)FAX: 1.800.892.3273 (252.447.5502)

Tandemloc designs, manufactures and tests lifting, securing and mobilizing components for all industries. See our website for details and important safety information.

Email: 824 Highway 101 • Havelock, NC 28532info@tandemloc.com • www.tandemloc.com

Read all safety labels and instructions prior to use. Product to be used by qualified personnel only.

To avoid lifter failure, potential death and property damage, never exceed WLL (Working Load Limit)This document contains the proprietary information of Tandemloc, Inc. and your access and use shall be, and is at all times, pursuant to and limited by the Tandemloc, Inc. Terms of Use.You shall not, and shall not encourage, assist, or authorize another party to copy, distribute, publically display, modify, reverse engineer,decompile, or take any other action to reproduce or replicate this document or the information contained herein. © Copyright 2012 by Tandemloc, Inc.Dimensions are subject to manufacturing tolerance and change.

NOTES:1. PART NO.: N31000C-1PA, 20’ AUTOLOC SPREADER2. OUTSIDE DIMENSIONS OF SPREADER (LENGTH AND WIDTH)

ARE LESS THAN OUTSIDE DIMENSIONS OF LIFTED CONTAINER

20' AUTOLOC SPREADER (N31000C-1PA)Cage Code: 65059 | Drawing No: SN31000C-1PA | Revision: -- | Sheet: 2 of 2

UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHESSEE ELECTRONIC PARTS LIST FOR BILL OF MATERIALS

DO NOT SCALE DRAWING236.94 FRAME OVERALL

95.47FRAME

OVERALL

FLIPPER GUIDE SHOWNIN RETRACTED POSITION

FLIPPER GUIDESHOWN IN USE POSITION

28.81FRAME OVERALL

60.83

38.0317.95

230.44 BAYONET CENTER TO BAYONET CENTER

88.97BAYONET CENTER

TO BAYONET CENTER

AUTOLOC VINYLBOTH SIDES

5” BLACK VINYLBOTH SIDES

5” RED VINYLBOTH SIDES

WLL 70,528 LB

TEL: 1.800.258.7324 (252.447.7155)FAX: 1.800.892.3273 (252.447.5502)

Tandemloc designs, manufactures and tests lifting, securing and mobilizing components for all industries. See our website for details and important safety information.

Email: 824 Highway 101 • Havelock, NC 28532info@tandemloc.com • www.tandemloc.com

Read all safety labels and instructions prior to use. Product to be used by qualified personnel only.

To avoid lifter failure, potential death and property damage, never exceed WLL (Working Load Limit)This document contains the proprietary information of Tandemloc, Inc. and your access and use shall be, and is at all times, pursuant to and limited by the Tandemloc, Inc. Terms of Use.You shall not, and shall not encourage, assist, or authorize another party to copy, distribute, publically display, modify, reverse engineer,decompile, or take any other action to reproduce or replicate this document or the information contained herein. © Copyright 2012 by Tandemloc, Inc.Dimensions are subject to manufacturing tolerance and change.

UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHESSEE ELECTRONIC PARTS LIST FOR BILL OF MATERIALS

DO NOT SCALE DRAWING

NOTES:®1. PART NO.: SN3100AA-2PA, 40' AUTOLOC SPREADER

2. SWL 67,200 LB3. PROOF TESTED TO 125% (84,000 LB) AND CERTIFIED4. STANDARD SPECIFICATION #EAD2100A APPLIES5. SPREADER MEETS OR EXCEEDS AISC FATIGUE LIFE OF 600,000 CYCLES6. AUTO ACTUATED SPREADER UNLOCKS WHEN SPREADER IS FIRST LIFTED THEN

LOCKS WHEN LOWERED AND LIFTED AGAIN, ALTERNATING WITH EACH CYCLE. SHOWNIN LOCKED POSITION.

7. FINISH: SANDBLAST, THERMAL ZINC, PRIME AND PAINT SAFETY YELLOW8. CALCULATED WEIGHT: 4,000 LBS9. DETAILED INFORMATION ON LISTED OPTIONS IS AVAILABLE UPON REQUEST

INDICATOR FLAGS LOCATED ATEACH CORNER PROVIDEPOSITIVE VISUAL CUE OF LOCKEDOR UNLOCKED SPREADER. FLAGSATTACHED DIRECTLY TO BAYONETS

2" MASTER RINGINSIDE DIMENSIONS 14.00 [356 MM] X 7.00 [178 MM]LOCATED 256.5" [6515 MM]ABOVE SPREADER CORNER FITTINGS

FLIPPER GUIDETYPICAL 4 PLACES

®AUTOLOC GEAR BOX ACTIVATESDRIVE LINKAGE & ROTATES TWISTLOCKBAYONETS. ALTERNATES BETWEENLOCKED & UNLOCKED EACH TIME THESLING IS SLACKENED FROM A FULLYTENSIONED POSITION

DETAIL A

CELL GUIDE WHEELSFOR EACH CORNERARE STANDARD

TWISTLOCK BAYONET(SHOWN LOCKED)DESIGNED FOR TOPAPERATURE IN STANDARDISO 1161 CORNER FITTING

SEE DETAIL A

®40' AUTOLOC SPREADER (N3100AA-2PA)

Cage Code: 65059 | Drawing No: SN3100AA-2PA | Revision: A | Sheet: 1 of 2

REV DESCRIPTION DATE APPROVEDA REMOVED “OPTIONAL” FROM FLIPPER GUIDE NOTES 1/27/10 DAH

REVISIONS

TEL: 1.800.258.7324 (252.447.7155)FAX: 1.800.892.3273 (252.447.5502)

Tandemloc designs, manufactures and tests lifting, securing and mobilizing components for all industries. See our website for details and important safety information.

Email: 824 Highway 101 • Havelock, NC 28532info@tandemloc.com • www.tandemloc.com

Read all safety labels and instructions prior to use. Product to be used by qualified personnel only.

To avoid lifter failure, potential death and property damage, never exceed WLL (Working Load Limit)This document contains the proprietary information of Tandemloc, Inc. and your access and use shall be, and is at all times, pursuant to and limited by the Tandemloc, Inc. Terms of Use.You shall not, and shall not encourage, assist, or authorize another party to copy, distribute, publically display, modify, reverse engineer,decompile, or take any other action to reproduce or replicate this document or the information contained herein. © Copyright 2012 by Tandemloc, Inc.Dimensions are subject to manufacturing tolerance and change.

NOTES:®1. PART NO.: SN3100AA-2PA, 40' AUTOLOC SPREADER

2. OUTSIDE DIMENSIONS OF SPREADER (LENGTH AND WIDTH)ARE LESS THAN OUTSIDE DIMENSIONS OF LIFTED CONTAINER

®40' AUTOLOC SPREADER (N3100AA-2PA)

Cage Code: 65059 | Drawing No: SN3100AA-2PA | Revision: A | Sheet: 1 of 2UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES

SEE ELECTRONIC PARTS LIST FOR BILL OF MATERIALSDO NOT SCALE DRAWING478.38 [12,151mm] FRAME OVERALL

83.76[2,128mm]

103.81[2,637mm]

103.23[2,622mm]

103.81[2,637mm]

83.76[2,128mm]

2.60 [66mm] TYP81.97 [2,082mm]

6.00 [152mm]

6.00 [152mm]

48.88 [1,242mm]48.88 [1,242mm]

21.37[543mm]26.36

[670mm]

95.47[2425mm]FRAME

OVERALL

26.36[670mm]

21.38[543mm]

28.81 [731.8mm]FRAME OVERALL

11.78 [299mm]60.83

[1545mm]

10.00[254mm]

38.05[966.3mm]

17.95[456mm] 7.03

[179mm]

FLIPPER GUIDESHOWN IN USE POSITION

FLIPPER GUIDE SHOWNIN RETRACTED POSITION

471.88 [11986mm] BAYONET CENTER TO BAYONET CENTER

88.97 [2260mm]BAYONET CENTER

TO BAYONET CENTER

REV DESCRIPTION DATE APPROVEDA REMOVED “OPTIONAL” FROM FLIPPER GUIDE NOTES 1/27/10 DAH

REVISIONS