Upload
hanno-lubbe
View
171
Download
2
Embed Size (px)
Citation preview
SUPER SQV III Comparison Real Product with Imitation
HKS SUPER SQVIII Imitation
■ Appearance
There is no major difference. The paint of the imitation is poor and dark. There is a line on the funnel part of the imitation.
(See the photograph on the right) The imitation uses longer domed cap nuts that secure the
upper part.
The 4mm hose fitting length from the SQV3 unit’s rear end is
different. (Real SQV3 23mm, Imitation 26mm
Imitation
SUPER SQV III Comparison Real Product with Imitation
■■■■HKS Emblem
The imitation’s HKS emblem does not have “R” mark, and the quality of the emblem is poor.
■■■■HKS Round Emblem on the Upper Part
The quality of imitation’s emblem is very poor; most of the logo is not clear.
The imitation’s emblem is plated over surface; it does not have hairline process or hologram.
●Kit Parts
The instruction manual included in the imitation is not printed, but copied. Also, the imitation includes an
installation flange pipe. T-fittings are not included, and only 2 tie wraps are included.
The C-ring included in the imitation is made of steel. The C-ring included in the real SQV3 is made of
SUS.
SUPER SQV III Comparison Real Product with Imitation
■■■■When the Primary Valve is Opened.
The primary valve of the imitation has a thicker silicone sealing; therefore the primary valve stroke
becomes insufficient to operate properly. HKS Approx.2mm, Imitation Approx.1mm
The imitation uses low heat resistant Nylon material for the resin part, which may cause trouble/problem.
■■■■Bushing
The imitation does not use a durable bushing which may cause a durability problem.
SUPER SQV III Comparison Real Product with Imitation
■■■■Stem Seal
The imitation’s stem seal force fits roughly so the shaft cannot move smoothly, which may cause failure.
■■■■Spring Seat & Diaphragm
The spring seat included in the imitation is made of steel. The spring seat included in the real SQV3 is
made of SUS. The material and shape of the diaphragm included in the imitation are not durable enough for high
performance use.
■■■■Packing
HKS SUPER SQVⅢ The SQV3 unit is packed in a small box with a label the lot number is on, and other
components are packed in a plastic bag so the components and SQV3 unit do not come in contact with
each other. Imitation The SQV3 unit is packed in a plastic bag, and the plastic bag is put in a box with other
components in another plastic bag. To prevent parts from coming in contact with each other, there is a
paper included as a cushion.
SUPER SQV III Comparison Real Product with Imitation
■■■■Package
When the imitation’s package is seen under the light, paper pattern on surface can be noticeable. (See
the diagram on top.)
The gradation of the imitation’s logo is different from the real SQV3 package. The text font on the back of the package is different from the real SQV3 package. The imitation’s font is
slightly thick therefore the sentences layout is also slightly different. (See the diagram below.)
Real SQV3 Imitation