ENGINEERED HARDWOOD WALL PANELS

WOODSTACKED

LBI-4796 ANTIQUEDLBI-4005 ENGLISH

LBI-4796 ANTIQUED LBI-2012 JUGLANS LBI-4005 ENGLISH

LBI-2012 JUGLANS

WIDTH/LENGTH FINISH SPECIES COVERED AREA PER CASE14”/57” Antiqued: 100% Natural Oil Antiqued: White Oak 22 Sq. ft. English: Varnish 10% Gloss English: MapleTHICKNESS VARIATION Juglans: Varnish 10% Gloss Juglans: Walnut0.28” and 0.35”

LBI-1105 PRINCE EDWARD

LBI-1105 PRINCE EDWARD

WIDTH/LENGTH FINISH SPECIES COVERED AREA PER CASE13.5”/53.5” Varnish 10% Gloss Walnut 30 Sq.ft. THICKNESS VARIATION 0.19”, 0.26” and 0.31”

LBI-1105 PRINCE EDWARD

FINISH SPECIES COVERED AREA PER CASE Andover, Beach, Knoll: 100% Natural Oil Andover, Beach: White Oak Andover, Barn, Beach: 18.2 Sq.ft. Barn: Varnish 10% Gloss Barn: Walnut Knoll: 23.5 Sq.ft. Natural: No Finish Knoll: Cedar Natural: 17 Sq.ft. Natural: Barn Wood WIDTH/LENGTH THICKNESS VARIATION: Andover, Barn and Beach: 14”/47” Andover, Barn, Beach: 0.43” and 0.51” Knoll: 18”/47” Knoll: 0.31” and 0.39” Natural: 14”/44” Natural: 0.47” and 0.55”

LBI-1231 NATURAL

LBI-2590 ANDOVERLBI-0318 BARN

LBI-1027 KNOLLLBI-3812 BEACH

LBI-1027 KNOLL LBI-0318 BARN LBI-3812 BEACH LBI-1231 NATURALLBI-2590 ANDOVER

LBI-9130 NIAGARA LBI-0310 NANAVUT LBI-1012 YUKON

LBI-9130 NIAGARA

LBI-0310 NANAVUT

LBI-1012 YUKON

WIDTH/LENGTH13.5”/53.5” THICKNESS VARIATION0.19”, 0.26” and 0.31”

COVERED AREA PER CASE30 Sq. ft.

FINISH 100% Natural Oil SPECIESNanavut: Red OakNiagara: White OakYukon: Maple

LBI-0505 ASHES

LBI-0111 ADVENTLBI-0429 LOBO

LBI-0314 GRIS

LBI-0505 ASHES

LBI-0111 ADVENT

LBI-0429 LOBO

LBI-0314 GRIS

WIDTH/LENGTH14”/44” THICKNESS VARIATION 0.33” and 0.39”

COVERED AREA PER CASE17 Sq. ft.

FINISH Varnish 10% Gloss SPECIESMaple

LBI-1223 ALBERTA

LBI-0602 BRITISH COLUMBIA1

LBI-0403 OSTERIA2

LBI-1223 ALBERTA1

LBI-0829 NOMA2

LBI-0530 MANITOBA1

LBI-0218 MUGARITZ 2

LBI-0530 MANITOBA

Due to the nature of the product as a unique and organic material, imperfections and variations in wood grain and color may vary from samples.

Items with 1 come with a natural oil finishItems with 2 come with U.V. finish

LBI-0602 BRITISH COLUMBIA

WIDTH/LENGTH12”/60” THICKNESS VARIATION0.35” and 0.43”

COVERED AREA PER CASE25 Sq. ft.

FINISH 100% Natural OilU.V. Varnish 10% Gloss SPECIESMix of Hardwood Species

WIDTH/LENGTH8.5”/50.5” THICKNESS VARIATION0.50” and 1.00”

COVERED AREA PER CASE15.5 Sq. ft.

FINISH Urethane SPECIESHarlon: OakFrankfort: HickoryLexington: Hickory

LBI-DH002 LEXINGTON

LBI-DH001 FRANKFORT

LBI-DH001 FRANKFORT

LBI-DH003 HARLON

LBI-DH002 LEXINGTON

LBI-DH003 HARLON

LBI-WL005 PRAIRIE

WIDTH/LENGTH FINISH SPECIES COVERED AREA PER CASE THICKNESS VARIATION 9.5”/53” Urethane Oak 18.8 Sq. ft. 0.375” and 0.50”

LBI-WL004 RANGE

LBI-WL003 MIDNIGHT LBI-WL001 VAIL

LBI-WL002 WILD LAND

LBI-WL001 VAIL LBI-WL004 RANGE LBI-WL005 PRAIRIE LBI-WL002 WILD LANDLBI-WL003 MIDNIGHT

WIDTH/LENGTH FINISH SPECIES COVERED AREA PER CASE9.5”/53” Urethane Walnut 18.8 Sq. ft. THICKNESS VARIATION 0.375” and 0.50”

LBI-WW001 MOUNTAIN MIST

LBI-WW001 MOUNTAIN MIST

Trim PiecesCorner and Contour MoldingsDesign is in the details. You can customize your look by installing our decorative panels wall to wall or with corner or contour molding. Our trim is sold in 90” or 96” pieces; availability varies based on species and wall panel. Please contact your sales representative today for more information.

Customization

Quick Mock-UpsYou need to know your idea will work, and you need to know now. One of the things architects and designrs appreciate about working with Stacked Wood is our ability to develop mock-ups in short order, helping streamline your creative process.

We Bring Your Ideas to LifeProducts can be personalized or fully customized.Can’t find the exact design or finish you want in our collections? When creativity calls, we’re there every step of the way. Take advantage of our clever, artistic approaches as we guide you through a fast, personalized development process that takes into account your creative vision.

Limitless Design OptionsWe have extensive experience taking conceptual designs and quickly translating them into prototypes and tangible products. That’s a huge advantage for designers and architects. We act as a facilitator, knocking down barriers one by one so nothing stands in the way of your creative process.

HERRINGBONE

BASKET WEAVE

CUSTOM COLORING

• Electric Drill• 100% polyurethane

construction glue (3 tubes per 100 ft2 or 9.5 m2)

• Construction glue applicator

• Finishing saw or electric mitre saw

• Jigsaw

• Saw Bench• Laser level or six-foot level• Measuring Tape• Hammer• Small Rubber Mallet• X-Acto type knife• Finish hammer or • Pneumatic finish nailer (#23

nails)• Stepladder

Stacked Wood Installation InstructionsTools:

Make sure your knives and saw blades are in prime condition.

Step 1: Draw a horizontal line at 3/4” (1.9 cm) and another at 1 1/4” (3.18 cm) from the floor, this line will become the horizontal level line to install your Stacked Wood.

Step 2: Trace a level line vertically at 3/4” (1.9 cm) and 1 1/4” (3.18 cm), from the left and right side of your wall, the area between these two corresponds to the vertical adjustment area.

Step 5: Position the first panel at the lower left section of the wall. Align the first panel vertically in the adjustment area and the top section of the panel on the horizontal and vertical lines calculated earlier.

Step 6: Nail the panel in place with #23 nails on the contour lips and on the two bottom rows in angles between wood pieces. NEVER NAIL DIRECTLY ON THE FACE OF THE NARROW WOOD PIECES.

Step 3: Cut a minimum of 8” (20.32 cm ) from the male side of your first panel, save the female cut section of the panel to start the wall.

Step 4: A: Apply a line of 100% polyurethane glue in the form of a rectangle (1” (2.54 cm) from edges) and an X inside the rectangle. B: Apply glue at the edges of each panel.

Step 5:

Step 4:

Step 3:

min 8” (20.32 cm)

Step 6:

Step 7: Repeat the gluing procedure (Step 4). Insert the second panel in the previous one using the horizontal adjustment section. Repeat Step 6.

Step 8: Measure the last panel from the top row of the panel already installed to the adjustment area where installation is to be completed. The female part that you will cut will become the first element of the next row.

Step 9: For the last panel to be installed in a row, draw a horizontal line at 3/4” (1.9 cm) and on vertical line a 1 1/4” (3.18 cm) from the ceiling.

Step 10: Cut the panels of the last row to fit within the horizontal adjustment section.

Step 11: Insert the molding in the reserved space set at the beginning of the installation of the Stacked Wood panels.

NOTE: If wood pieces detaches from a wall panel, reposition using 100% polyurethane glue.

*Installation instructions may vary per species. Please contact your sales representative to obtain the correct version.

LBI-WW001 MOUNTAIN MIST

LBI-WL004RANGE

LBI-WL003 MIDNIGHT

LBI-WL005PRAIRIE

LBI-1105 PRINCE EDWARDS

LBI-4005 ENGLISH

LBI-1027 KNOLL

LBI-1231 NATURAL

LBI- 3812 BEACH

LBI-0318 BARN

LBI-2590 ANDOVER

LBI-4796 ANTIQUED

LBI- DH003HARLON

LBI- DH001FRANKFORT

LBI- DH002LEXINGTON

LBI-2012 JUGLANS

LBI-1012 YUKON

LBI-0530 MANITOBALBI-0218UV MUGARITZ

LBI-1223 ALBERTALBI-0829UV NOMA

LBI-0505ASHES

LBI-0429LOBO

LBI-0111 ADVENT

LBI-9130 NIAGARA

LBI-0602 BRITISH COLUMBIALBI-0403UV OSTERIA

MaisieCollection

SatineCollection

VintageCollection

Naturale Collection

GenerationCollection

ExpressiveCollection

Premier Collection BourbonCollection

LBI-0314GRIS

LBI-WL002WILD LAND

LBI-WL001VAIL

LBI-0310 NANAVUT

WOODSTACKED

WWW.STACKEDWOODWALLS.COM