Embed Size (px)
DESCRIPTION
bro
Citation preview
Always a step ahead in technology
Catalogue No. : 126/M/07/07/R1
ELECONSTACKER RECLAIMERELECONSTACKER RECLAIMEREELLEECCOONNSSTTAACCKKEER R RREECCLLAAIIMMEERR
For continuous stacking an reclaiming of crushed bulk materials, economics solutions can only be achieved by the use of combined bucket wheel stacker reclaimer. Elecon bucket wheel stacker reclaimer machine can stack the material to form the stockpile or reclaim the stockpiled material and feed onto the main line conveyor.
Travel bogies are of robust construction and are provided with case hardened steel travel wheels. Travel drive is provided with spiral bevel and helical gear units of dust proof construction with gear casings of fabricated steel Cast-Iron.
The lower carriage is of sturdy box type design and is supported on the travel mechanism. It has statically determined three points support, which ensures stability and guarantees an even distribution of load over the entire assembly.
The slewing mechanism has direct current drives/ vvvf drives. The speeds of these motors are variable over a specified range controlled by a potentiometer provided on control desk with the sector-wise position left -O- right. Slewing rang is ± 105 degrees. The super structure, which is of welded plate construction, is supported on ball bearing/roller bearing slewing ring.
The bucket wheel boom is of sturdy welded plate construction or lattice girder construction.
The bucket wheel is cell or cell-less and fitted with replaceable buckets. The tips of the bucket are of wear resisting steel.
A Fluid coupling is provided between the motor and the bucket wheel gear. The bucket wheel drive is reversible type to facilitate withdrawal of wheels in the event of excessive under cutting. Bucket wheel drive gear is of spiral bevel helical or planetary design.
Hydraulic cylinders and power pack do hoisting or lowering of the bucket wheel boom. The upper and lower positions of the bucket wheel boom are limited by control and limit switches.
Electronic belt weigh scale is provided optionally on the boom conveyor to measure the flow and also to regulate the reclaiming capacity of the stacker-cum-reclaimer.
Motorised cable reeling drums, complete with suitably rated contorque drive motor, with gear unit and swing switch, are provided on the lower frame. The cable reeling drums are suitable to pay out the cable in both the direction from the central feeding point.
DESIGN FEATURESTRAVEL BOGIES
THREE-POINT SUPPORT
SLEWING MECHANISM
BUCKET WHEEL BOOM
BUCKET WHEEL
HYDRAULIC LUFFING
BELT WEIGH SCALE
POWER AND CONTROL CABLE REELING DRUMS
Wheel on Boom Reclaimer with 40 meters Boom Length handling Iron ore at 4000 MTPH capacity at izag Port Trust
Stacker-Cum-Reclaimer in Operation at Thermal Power Station of Maharastra State Electricity Board
OPERATOR'S CABIN
LOCKING ARRANGEMENT
WIND WARNING DEVICE
AUTOMATIC OPERATION
The operator's cabin is made of sheet metal with provision for adequate ventilation and lighting. Adequate numbers of glass panels are fitted to provide a panoramic view. Control Panel for the entire electrical equipment is also provided. Air-conditioner unit is installed on request.
Adequate locking arrangement is provided between the super structure and lower structure to make the machine withstand storms and cyclonic winds
The Elecon stacker-reclaimer machine is provided with wind warning device. When the velocity of wind exceeds the set value, the alarm/trip signals in the control systems of the machine activate the audio/visual Signal to the machine operator in the operator's cabin. The operator thereby applies the rail clamps and Stops the travel movement of the machine.
Stacker-cum-reclaimers can be designed for unidirectional flow or instantaneously reversible flow depending upon the application. In case of reversible stacker-cum-reclaimer, with the provision of a tripper car, in combination with an intermediate conveyor, material is conveyed in the same direction as It was stockpiled (this is done by reversing the main line conveyor).
The stacker-reclaimer machine must run reliably and without interruption, round the clock, if necessary, in all climates and under all conditions. This means top dependability in hottest temperature in any part of the world. The recognition of these circumstances has formed the basis for the design of the electrical equipement for Elecon's stacker-cum-reclaimer. Electrical equipment includes large range and type like HT trailing cable, cable reeling drum, special torque motor, HT switchgear, transformers LT switchgear, variable speed AC, DC or VVVF drives, resistance boxes, heavy-duty limit switches, safety devices, Motors, Operator's desk, wind warning alarm and protection (optional) etc. These are all carefully selected to suit operational requirements, ease of maintenance, vibration and jerks, dusty, hot and humid weather. Various mode of controls exists to meet stacking and reclaiming systems. Special controls and high degree of automation can be provided according to the needs of the customer. Controls and automation design is available with conventional type relay logic as well as with programmable type logic controller. Many more special functions, indications, fault annunciation, alarm, communication and interlocks with central control desk, special type of safety and operational monitoring devices, etc. are available to meet a wide range of needs of various users And consultants.
.
ELECTRICAL EQUIPMENT AND CONTROLS FOR STACKER- RECLAIMER
AHMEDABAD :Phone : +91 (79) 26406685, 26406686Fax : 26401363E-Mail : [email protected]
BILASPUR :Phone : +91 (7752) 228922, 224122Fax : 223188E-Mail : [email protected]
JAMSHEDPUR :Phone : +91 (657) 2464241, 2361837Fax : 2464241E-Mail : [email protected]
MUMBAI-2(Goregaon) :Phone : +91 (22) 26861398 Fax : (022) 26860503E-Mail : [email protected]
PUNE :Phone : +91 (20) 26141795Fax : (020) 26141793E-Mail : [email protected]
ASANSOL :Phone : +91 (341) 2205901, 2211726Fax : 2202038E-Mail : [email protected]
CHENNAI :Phone : +91 (44) 24349497, 24349237Fax : 24349643E-Mail : [email protected]
KOLKATA :Phone : +91 (33) 24761861, 24760876Fax : 24761831E-Mail : [email protected]
NAGPUR :Phone : +91 (712) 2540771, 2531601Fax : 2554982E-Mail : [email protected]
SECUNDRABAD :Phone : +91 (40) 27844748, 27845250Fax : 27848317E-Mail : [email protected]
BANGALORE :Phone : +91 (80) 22250082, 22260219Fax : 22281834E-Mail : [email protected]
DHANBAD :Phone : +91 (326) 2306283, 2302320Fax : 2302320E-Mail : [email protected]
MUMBAI-1 (Churchgate) :Phone : +91 (22) 22821315, 2282025 Fax : 22870791E-Mail : [email protected]
NEW DELHI :Phone : +91 (11) 23414339, 40, 41 Fax : 23709046E-Mail : [email protected]
VADODARA :Phone/ Fax : +91 (265) 2312972,2312980 E-Mail : [email protected]
UAE :ELECON MIDDLE EAST FZCOPhone : +971 46091 424, +971 46091 425Fax : + 971 46091 426E-Mail : [email protected]@dubai.elecon.com
SINGAPORE :ELECON SINGAPORE PTE. LTD. Phone : + 65 62278258Fax : + 65 62278942E-Mail : [email protected] [email protected]
REGISTERED OFFICE :Anand - Sojitra Road, Vallabh Vidyanagar 388 120 Gujarat, India, Phones : +91 (2692) 230168, 231125 Fax : (02692) 236508
Website: http://www.emtici.co.in
MARKETING & SERVICING COMPANY
Twin Boom Stacker
Slewing Stacker & Bridge type Bucket Wheel Reclaimer
Barrel type Blender Reclaimer
Circular stock Pile with Bridge Type Scrapper Reclaimer
EMTICI ENGINEERING LIMITED
Des
ign
& P
rient
ed B
y.: A
kaai
sh P
rintin
g &
Sta
tona
ry
5000-07/07
CHINA :ELECON ENGINEERING (SUZHOU) CO. LTD Phone : +86 512 62881662,Fax : +86 512 62881662E-Mail : [email protected]
SOUTH AFRICA :ELECON AFRICA PTY. LTD. :Phone : +27 11 4771776, +27 11 4766560Fax : +27 11 4771776E-Mail : [email protected]@gear.elecon.com
