49
Gearmotor/Gearmotor with Brake/Reversible Gearmotor Model and Type Designation/Standard Model Lineup 3-phase Performance Table/Dimension Diagram 1-phase Performance Table/Dimension Diagram Speed Control Gearmotor/Speed Control Gearmotor with Brake Model and Type Designation/Standard Model Lineup 1-phase Performance Table/Dimension Diagram P. P. P. P. P. D5 D9 D19 D33 D37 D1 GTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Gearmotor Parallel Shaft

Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

Embed Size (px)

Citation preview

Page 1: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

■Gearmotor/Gearmotor with Brake/Reversible Gearmotor

Model and Type Designation/Standard Model Lineup

3-phase Performance Table/Dimension Diagram

1-phase Performance Table/Dimension Diagram

■Speed Control Gearmotor/Speed Control Gearmotor with Brake

Model and Type Designation/Standard Model Lineup

1-phase Performance Table/Dimension Diagram

P.

P.

P.

P.

P.

D5

D9

D19

D33

D37

D1

GTR - LSe r i e s

GType

Parallel Shaft

Gearmotor

Model and Type DesignationStandard Model Lineup

GTR-L SeriesGearmotor

Parallel Shaft

Page 2: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D3D2

①Classification by Mount Form

②Series Name

④Frame No. and Diameter of Output shaft

⑤Bearing type

⑥Reduction Ratio

⑦Motor Designation  and Capacity

⑧⑨Option

⑩Auxiliary Mark

L

F

G

Blank

N

R

U

P

PN

Output Shaft Diameter

M

B

3 : 1/3 ~ 360 : 1/360

T15

T25

T40

S06

S10

S15

S25

S40

Blank

W

T

K

C

Blank

X

: Foot Mount

: Flange Mount

: Parallel Shaft

: With Motor

: With Brake Motor

: Reversible(1-phase only)

: With Speed Control Gearmotor

: With Speed Control Gearmotor

: With Speed control brake motors

: Metal type

: Bearing type

: 3-phase 15W

: 3-phase 25W

: 3-phase 40W

: 1-phase 6W

: 1-phase 10W

: 1-phase 15W

: 1-phase 25W

: 1-phase 40W

: Standard Specifications

: High Voltage

: T-Type Terminal Box

: K-Type Terminal Box

: Rectifier built-in terminal box for brake motor

: Terminal box for Speed Control type motor

: Standard Specs.

: Mark for Additional Specs.

U-Type(With Controller)

P-Type(Controller Sells Separately)

P-Type(Controller Sells Separately)

3-phase: 1-phase:

200V/50Hz、200V/60Hz、220V/60Hz 100V/50Hz、100V/60Hz

3-phase: 1-phase:

380V/50Hz、400V/50Hz、400V/60Hz、440V/60Hz 200V/50Hz、200V/60Hz(except for 6W)

L Series(Parallel Shaft) Model and Type Designation

GTR-L Series gearmotors are classified by codes as shown below. Specify these codes in your inquiry and order.

Position indicator for lead-wire, terminal box Refer to the indication mark list in P. E54 for details.

③Classification by  Motor Type

⑪Spec. DesignationNote: Spec. Designation does not appear on

the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.

Note 1: Note 2:

For the types stated below, manufacturing with double voltage is not feasible. ●Single-phase 6W Be sure that the specification of C-Type Terminal Box for brake motors with rectifier built-in is different from that for the speed control type. For more details, refer to P. E40 and P. E56

① ② ④ ⑤ ③

G 10 3

S06

⑦ ⑧ ⑨ ⑪ ⑩

LG 15 240 T25F W

MMN

G 15 360 S40F BNC X T6

Type Shaft Arrangement

Auxiliary Mark

Spec. Designation

Frame Number

Motor Capacity OptionReduction

Ratio

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Model and Type Designation

Model and Type Designation

GTR-L Series

Page 3: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D3D2

①Classification by Mount Form

②Series Name

④Frame No. and Diameter of Output shaft

⑤Bearing type

⑥Reduction Ratio

⑦Motor Designation  and Capacity

⑧⑨Option

⑩Auxiliary Mark

L

F

G

Blank

N

R

U

P

PN

Output Shaft Diameter

M

B

3 : 1/3 ~ 360 : 1/360

T15

T25

T40

S06

S10

S15

S25

S40

Blank

W

T

K

C

Blank

X

: Foot Mount

: Flange Mount

: Parallel Shaft

: With Motor

: With Brake Motor

: Reversible(1-phase only)

: With Speed Control Gearmotor

: With Speed Control Gearmotor

: With Speed control brake motors

: Metal type

: Bearing type

: 3-phase 15W

: 3-phase 25W

: 3-phase 40W

: 1-phase 6W

: 1-phase 10W

: 1-phase 15W

: 1-phase 25W

: 1-phase 40W

: Standard Specifications

: High Voltage

: T-Type Terminal Box

: K-Type Terminal Box

: Rectifier built-in terminal box for brake motor

: Terminal box for Speed Control type motor

: Standard Specs.

: Mark for Additional Specs.

U-Type(With Controller)

P-Type(Controller Sells Separately)

P-Type(Controller Sells Separately)

3-phase: 1-phase:

200V/50Hz、200V/60Hz、220V/60Hz 100V/50Hz、100V/60Hz

3-phase: 1-phase:

380V/50Hz、400V/50Hz、400V/60Hz、440V/60Hz 200V/50Hz、200V/60Hz(except for 6W)

L Series(Parallel Shaft) Model and Type Designation

GTR-L Series gearmotors are classified by codes as shown below. Specify these codes in your inquiry and order.

Position indicator for lead-wire, terminal box Refer to the indication mark list in P. E54 for details.

③Classification by  Motor Type

⑪Spec. DesignationNote: Spec. Designation does not appear on

the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.

Note 1: Note 2:

For the types stated below, manufacturing with double voltage is not feasible. ●Single-phase 6W Be sure that the specification of C-Type Terminal Box for brake motors with rectifier built-in is different from that for the speed control type. For more details, refer to P. E40 and P. E56

① ② ④ ⑤ ③

G 10 3

S06

⑦ ⑧ ⑨ ⑪ ⑩

LG 15 240 T25F W

MMN

G 15 360 S40F BNC X T6

Type Shaft Arrangement

Auxiliary Mark

Spec. Designation

Frame Number

Motor Capacity OptionReduction

Ratio

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Model and Type Designation

Model and Type Designation

GTR-L Series

Page 4: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D4

GTR - LSe r i e s

GType

Parallel Shaft

D5

3-Phase

15W~40W

3 Rated Power Source 200V 50/60Hz, 220V/60Hz

Class E

Direct start

Totally Enclosed

4

Continuous Rating

Spur gear and Helical gear

Grease Lubrication

New JIS Key(JIS 1301-1976 class)

S43C

Aluminium die-cast

-10℃~40℃

85% max.(without any dew condensation)

1,000m max.

Indoors

Anion painting, Acrylic paint

Grey(Mansel code: 9B6/0.5)

No restriction in the mounting angle.(horizontally, vertically or heeling angle)

6W~40W

100V 50/60Hz

Class E

Capacitor Start

1-Phase

Well ventilated place free from corrosive gas, explosive gas vapor and/or dust.

Motor Part

Ambient Conditions

Painting

Mounting Direction

Speed Reduction Part

Number of phase

Capacity

Power Source

Starting Method

Number of Pole

Rating

Reduction Method

Lubrication

Output Shaft

Case Material

Ambient Humidity

Altitude

Painting Method

Painting Color

Insulation Classification

Protective cooling Method

Output Shaft Material

Ambient Temperature

Installation Location

Environment

Gearmotor

Model and Type DesignationStandard Model Lineup

GearmotorGearmotor with BrakeReversible gearmotor

Parallel Shaft

(1-Phase only)

Page 5: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D4

GTR - LSe r i e s

GType

Parallel Shaft

D5

3-Phase

15W~40W

3 Rated Power Source 200V 50/60Hz, 220V/60Hz

Class E

Direct start

Totally Enclosed

4

Continuous Rating

Spur gear and Helical gear

Grease Lubrication

New JIS Key(JIS 1301-1976 class)

S43C

Aluminium die-cast

-10℃~40℃

85% max.(without any dew condensation)

1,000m max.

Indoors

Anion painting, Acrylic paint

Grey(Mansel code: 9B6/0.5)

No restriction in the mounting angle.(horizontally, vertically or heeling angle)

6W~40W

100V 50/60Hz

Class E

Capacitor Start

1-Phase

Well ventilated place free from corrosive gas, explosive gas vapor and/or dust.

Motor Part

Ambient Conditions

Painting

Mounting Direction

Speed Reduction Part

Number of phase

Capacity

Power Source

Starting Method

Number of Pole

Rating

Reduction Method

Lubrication

Output Shaft

Case Material

Ambient Humidity

Altitude

Painting Method

Painting Color

Insulation Classification

Protective cooling Method

Output Shaft Material

Ambient Temperature

Installation Location

Environment

Gearmotor

Model and Type DesignationStandard Model Lineup

GearmotorGearmotor with BrakeReversible gearmotor

Parallel Shaft

(1-Phase only)

Page 6: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D7D6

1/3 1/5 1/10 1/15 1/20 1/25 1/30 1/40 1/50

1/60 1/80 1/100 1/120 1/160 1/200101-Phase 6W

LGN    FGN

LG     FG

LGR FGR

1/3 1/5 1/10 1/15 1/20 1/25 1/30 1/40 1/50

1/60 1/80 1/100 1/120 1/160 1/200101-Phase 10W

1/3 1/5 1/10 1/15 1/20 1/25 1/30 1/40 1/50

1/60 1/80 1/100 1/120 1/160 1/200 1/240 1/300 1/36012

3-Phase 15W

1-Phase 15W

1/3 1/5 1/10 1/15 1/20 1/25 1/30 1/40 1/50

1/60 1/80 1/100 1/120 1/160 1/200 1/240 1/300 1/36015

3-Phase 40W

1-Phase 40W

1/3 1/5 1/10 1/15 1/20 1/25 1/30 1/40 1/50

1/60 1/80 1/100 1/120

1/160 1/200 1/240 1/300 1/360

12

15

3-Phase 25W

1-Phase 25W

① ② ④ ⑤ ③

G 10 3

S06

⑦ ⑧ ⑨ ⑪ ⑩

L

③Classification by  Motor Type

④Frame No. and Diameter of Output shaft

⑤Bearing type

⑥Reduction Ratio

⑦Motor Designation  and Capacity

⑧⑨Option

⑩Auxiliary Mark

⑪Spec. Designation

L

F

G

Blank

N

R

Output Shaft Diameter

M

B

3 : 1/3 ~ 360 : 1/360

T15

T25

T40

S06

S10

S15

S25

S40

Blank

W

T

K

C

Blank

X

: Foot Mount

: Flange Mount

: Parallel Shaft

: With Motor

: With Brake Motor

: Reversible(1-phase only)

: Metal type

: Bearing type

: 3-phase 15W

: 3-phase 25W

: 3-phase 40W

: 1-phase 6W

: 1-phase 10W

: 1-phase 15W

: 1-phase 25W

: 1-phase 40W

: Standard Specifications

: High Voltage

: T-Type Terminal Box

: K-Type Terminal Box

: Rectifier built-in terminal box for brake motor

: Standard Specs.

: Mark for Additional Specs.

G 15 240 T25F W

3-phase: 1-phase:

200V/50Hz、200V/60Hz、220V/60Hz 100V/50Hz、100V/60Hz

3-phase: 1-phase:

380V/50Hz、400V/50Hz、400V/60Hz、440V/60Hz 200V/50Hz、200V/60Hz(except for 6W) 1-ph 6W type is not available for

high voltage.

MM

Position indicator for lead-wire, terminal box Refer to the indication mark list in P. E54 for details.

NG 15 360 S40F BR

C X T6

(Note 1)

L Series(Parallel Shaft) Model and Type Designation Standard Model Lineup

GTR-L Series Gearmotor/Brake Motor/Reversible Gearmotor are classified by codes as shown below. Specify these codes in your inquiry and order.

Type Shaft Arrangement

Auxiliary Mark

Spec. Designation

Frame Number

Motor Capacity OptionReduction

Ratio

Note:

Note:

Spec. Designation does not appear on the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.

Foot Mount type Flange Mount type

Reversible motors are available only in single-phase.    The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.

Note 1) 2)

Type Frame Number Reduction Ratio4P Motor

Capacity

Gearmotor

Gearmotor with Brake

Reversible Gearmotor

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Model and Type Designation

Model and Type Designation

GTR-L Series

①Classification by Mount Form

②Series Name

Page 7: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D7D6

1/3 1/5 1/10 1/15 1/20 1/25 1/30 1/40 1/50

1/60 1/80 1/100 1/120 1/160 1/200101-Phase 6W

LGN    FGN

LG     FG

LGR FGR

1/3 1/5 1/10 1/15 1/20 1/25 1/30 1/40 1/50

1/60 1/80 1/100 1/120 1/160 1/200101-Phase 10W

1/3 1/5 1/10 1/15 1/20 1/25 1/30 1/40 1/50

1/60 1/80 1/100 1/120 1/160 1/200 1/240 1/300 1/36012

3-Phase 15W

1-Phase 15W

1/3 1/5 1/10 1/15 1/20 1/25 1/30 1/40 1/50

1/60 1/80 1/100 1/120 1/160 1/200 1/240 1/300 1/36015

3-Phase 40W

1-Phase 40W

1/3 1/5 1/10 1/15 1/20 1/25 1/30 1/40 1/50

1/60 1/80 1/100 1/120

1/160 1/200 1/240 1/300 1/360

12

15

3-Phase 25W

1-Phase 25W

① ② ④ ⑤ ③

G 10 3

S06

⑦ ⑧ ⑨ ⑪ ⑩

L

③Classification by  Motor Type

④Frame No. and Diameter of Output shaft

⑤Bearing type

⑥Reduction Ratio

⑦Motor Designation  and Capacity

⑧⑨Option

⑩Auxiliary Mark

⑪Spec. Designation

L

F

G

Blank

N

R

Output Shaft Diameter

M

B

3 : 1/3 ~ 360 : 1/360

T15

T25

T40

S06

S10

S15

S25

S40

Blank

W

T

K

C

Blank

X

: Foot Mount

: Flange Mount

: Parallel Shaft

: With Motor

: With Brake Motor

: Reversible(1-phase only)

: Metal type

: Bearing type

: 3-phase 15W

: 3-phase 25W

: 3-phase 40W

: 1-phase 6W

: 1-phase 10W

: 1-phase 15W

: 1-phase 25W

: 1-phase 40W

: Standard Specifications

: High Voltage

: T-Type Terminal Box

: K-Type Terminal Box

: Rectifier built-in terminal box for brake motor

: Standard Specs.

: Mark for Additional Specs.

G 15 240 T25F W

3-phase: 1-phase:

200V/50Hz、200V/60Hz、220V/60Hz 100V/50Hz、100V/60Hz

3-phase: 1-phase:

380V/50Hz、400V/50Hz、400V/60Hz、440V/60Hz 200V/50Hz、200V/60Hz(except for 6W) 1-ph 6W type is not available for

high voltage.

MM

Position indicator for lead-wire, terminal box Refer to the indication mark list in P. E54 for details.

NG 15 360 S40F BR

C X T6

(Note 1)

L Series(Parallel Shaft) Model and Type Designation Standard Model Lineup

GTR-L Series Gearmotor/Brake Motor/Reversible Gearmotor are classified by codes as shown below. Specify these codes in your inquiry and order.

Type Shaft Arrangement

Auxiliary Mark

Spec. Designation

Frame Number

Motor Capacity OptionReduction

Ratio

Note:

Note:

Spec. Designation does not appear on the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.

Foot Mount type Flange Mount type

Reversible motors are available only in single-phase.    The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.

Note 1) 2)

Type Frame Number Reduction Ratio4P Motor

Capacity

Gearmotor

Gearmotor with Brake

Reversible Gearmotor

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Model and Type Designation

Model and Type Designation

GTR-L Series

①Classification by Mount Form

②Series Name

Page 8: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D8 D9

GTR - LSe r i e s

GType

Parallel Shaft

Gearmotor

Performance TableDimension diagram

Parallel Shaft

GearmotorGearmotor with Brake

3-Phase

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. The Shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on page E30, the shaft rotates clock wise when viewing from output side. (Reter to the diagram shown below.)

【Remarks】

Page 9: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D8 D9

GTR - LSe r i e s

GType

Parallel Shaft

Gearmotor

Performance TableDimension diagram

Parallel Shaft

GearmotorGearmotor with Brake

3-Phase

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. The Shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on page E30, the shaft rotates clock wise when viewing from output side. (Reter to the diagram shown below.)

【Remarks】

Page 10: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D11D10

Foot Mount Type Gearmotor with Brake Flange Mounted Type Gearmotor with Brake

LG FG LGN FGN

3-phase 15W

12

1/ 3

1/ 5

1/ 10

1/ 15

1/ 20

1/ 25

1/ 30

1/ 40

1/ 50

1/ 60

1/ 80

1/100

1/120

1/160

1/200

1/240

1/300

1/360

500

300

150

100

75

60

50

37.5

30

25

18.8

15

12.5

9.4

7.5

6.3

5

4.2

600

360

180

120

90

72

60

45

36

30

22.5

18

15

11.2

9

7.5

6

5

0.02

0.03

0.07

0.10

0.13

0.17

0.20

0.27

0.34

0.40

0.51

0.64

0.76

1.0

1.3

1.5

1.5

1.5

0.20

0.29

0.69

0.98

1.27

1.67

1.96

2.65

3.33

3.92

5.00

6.27

7.45

9.80

12.7

14.7

14.7

14.7

10

20

30

35

40

45

50

50

50

50

50

50

50

50

50

50

50

50

98

196

294

343

392

441

490

490

490

490

490

490

490

490

490

490

490

490

P.D11 Fig.D-1 2kg

P.D11 Fig.D-2 2kg

P.D11 Fig.D-3 2kg

P.D11 Fig.D-4 2kg

50Hz 60Hz

LG-12 -3~360-T15LG-12 -3~360-T15WFig.D-1

〔Round Weight 2kg〕 LG-12M-T15 LG-12M-T15W

FG-12 -3~360-T15FG-12 -3~360-T15WFig.D-2

〔Round Weight 2kg〕 FG-12M-T15 FG-12M-T15W

LGN-12 -3~360-T15LGN-12 -3~360-T15WFig.D-3

〔Round Weight 2kg〕 LGN-12M-T15 LGN-12M-T15W

FGN-12 -3~360-T15FGN-12 -3~360-T15WFig.D-4

〔Round Weight 2kg〕 FGN-12M-T15 FGN-12M-T15W

15W

12

12

T15

T15W

50/60/60

50/50/60/60

200/200/220

380/400/400/440

0.14/0.13/0.13

0.11/0.12/0.10/0.11

1350/1550/1600

1400/1400/1700/1700

E

N・m kgf・m N kgf

CAD Data: CAD Data:

CAD Data: CAD Data:

MBMB

MBMB

MBMB

MBMB

Foot Mount type Flange Mount type

300153

2220

7

33.535

76.5

50

φ12h7

4-φ6.5 9076

13.5

4

5582.5

11

300153

2220

76.5

φ12h7

4-φ6.5

411

8 3

26

21

13.5

32 3277

4377

(φ35)

300300

1882220

7

33.535

76.5

50

φ12h7

4-φ6.5 9076

13.5

4

5582.5

11

300188

2220

φ12h7

4-φ6.5

411

8 3

26

21

13.5

32 3277

4377

(φ35) 300

76.5

G-Type〔Parallel Shaft〕 3-Phase 15W

GearmotorGearmotor with Brake

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Model Code P.D6

Option P.E110P.E54

Lead-Wire/Terminal Box Position Mark

Foot Mount Type Gearmotor Flange Mounted Type Gearmotor

Performance Table/ Dimension

Performance Table/ Dimension

Standard Voltage (Continuous Rated 4 Poles)

Double Voltage (Continuous Rated 4 Poles)

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Voltage (V)

Rated Current (A)

Rated Rotation Speed (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

Gearmotor Gearmotor with BrakeMotor Capacity

Reduction Ratio

Frame No.

Output Shaft Rotation Speed (rpm)

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

GTR-L Series

Page 11: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D11D10

Foot Mount Type Gearmotor with Brake Flange Mount Type Gearmotor with Brake

LG FG LGN FGN

3-phase 15W

12

1/ 3

1/ 5

1/ 10

1/ 15

1/ 20

1/ 25

1/ 30

1/ 40

1/ 50

1/ 60

1/ 80

1/100

1/120

1/160

1/200

1/240

1/300

1/360

500

300

150

100

75

60

50

37.5

30

25

18.8

15

12.5

9.4

7.5

6.3

5

4.2

600

360

180

120

90

72

60

45

36

30

22.5

18

15

11.2

9

7.5

6

5

0.02

0.03

0.07

0.10

0.13

0.17

0.20

0.27

0.34

0.40

0.51

0.64

0.76

1.0

1.3

1.5

1.5

1.5

0.20

0.29

0.69

0.98

1.27

1.67

1.96

2.65

3.33

3.92

5.00

6.27

7.45

9.80

12.7

14.7

14.7

14.7

10

20

30

35

40

45

50

50

50

50

50

50

50

50

50

50

50

50

98

196

294

343

392

441

490

490

490

490

490

490

490

490

490

490

490

490

P.D11 Fig.D-1 2kg

P.D11 Fig.D-2 2kg

P.D11 Fig.D-3 2kg

P.D11 Fig.D-4 2kg

50Hz 60Hz

LG-12 -3~360-T15LG-12 -3~360-T15WFig.D-1

〔Round Weight 2kg〕 LG-12M-T15 LG-12M-T15W

FG-12 -3~360-T15FG-12 -3~360-T15WFig.D-2

〔Round Weight 2kg〕 FG-12M-T15 FG-12M-T15W

LGN-12 -3~360-T15LGN-12 -3~360-T15WFig.D-3

〔Round Weight 2kg〕 LGN-12M-T15 LGN-12M-T15W

FGN-12 -3~360-T15FGN-12 -3~360-T15WFig.D-4

〔Round Weight 2kg〕 FGN-12M-T15 FGN-12M-T15W

15W

12

12

T15

T15W

50/60/60

50/50/60/60

200/200/220

380/400/400/440

0.14/0.13/0.13

0.11/0.12/0.10/0.11

1350/1550/1600

1400/1400/1700/1700

E

N・m kgf・m N kgf

CAD Data: CAD Data:

CAD Data: CAD Data:

MBMB

MBMB

MBMB

MBMB

Foot Mount type Flange Mount type

300153

2220

7

33.535

76.5

50

φ12h7

4-φ6.5 9076

13.5

4

5582.5

11

300153

2220

76.5

φ12h7

4-φ6.5

411

8 3

26

21

13.5

32 3277

4377

(φ35)

300300

1882220

7

33.535

76.5

50

φ12h7

4-φ6.5 9076

13.5

4

5582.5

11

300188

2220

φ12h7

4-φ6.5

411

8 3

26

21

13.5

32 3277

4377

(φ35) 300

76.5

G-Type〔Parallel Shaft〕 3-Phase 15W

GearmotorGearmotor with Brake

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Model Code P.D6

Option P.E110P.E54

Lead-Wire/Terminal Box Position Mark

Foot Mount Type Gearmotor Flange Mount Type Gearmotor

Performance Table/ Dimension

Performance Table/ Dimension

Standard Voltage (Continuous Rated 4 Poles)

Double Voltage (Continuous Rated 4 Poles)

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Voltage (V)

Rated Current (A)

Rated Rotation Speed (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

Gearmotor Gearmotor with BrakeMotor Capacity

Reduction Ratio

Frame No.

Output Shaft Rotation Speed (rpm)

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

GTR-L Series

Page 12: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D13D12

Foot Mount Type Gearmotor

Flange Mounted Type Gearmotor

LG-12 -3~120-T25LG-12 -3~120-T25WFig.D-5

〔Round Weight 2kg〕

LG-15 -160~360-T25LG-15 -160~360-T25WFig.D-6

〔Round Weight 2.5kg〕 LG-12M-T25 LG-12M-T25W

LG-15M-T25 LG-15M-T25W

FG-12 -3~120-T25FG-12 -3~120-T25WFig.D-7

〔Round Weight 2kg〕

FG-15 -160~360-T25FG-15 -160~360-T25WFig.D-8

〔Round Weight 2.5kg〕 FG-12M-T25 FG-12M-T25W

FG-15M-T25 FG-15M-T25W

LG FG LGN FGN

3-phase 25W

12

15

500

300

150

100

75

60

50

37.5

30

25

18.8

15

12.5

9.4

7.5

6.3

5

4.2

600

360

180

120

90

72

60

45

36

30

22.5

18

15

11.2

9

7.5

6

5

0.03

0.06

0.11

0.17

0.23

0.28

0.34

0.45

0.56

0.68

0.86

1.1

1.3

1.7

2.1

2.6

2.7

2.7

0.29

0.59

1.08

1.67

2.25

2.74

3.33

4.41

5.49

6.66

8.43

10.8

12.7

16.7

20.6

25.5

26.5

26.5

10

20

30

35

40

45

50

50

50

50

50

50

50

70

70

70

70

70

98

196

294

343

392

441

490

490

490

490

490

490

490

686

686

686

686

686

P.D13 Fig.D-5 2kg

P.D13 Fig.D-7 2kg

P.D14 Fig.D-9 2.5kg

P.D14 Fig.D-11 2.5kg

P.D13 Fig.D-6 2.5kg

P.D13 Fig.D-8 2.5kg

P.D14 Fig.D-10 3kg

P.D14 Fig.D-12 3kg

50Hz 60Hz

CAD Data: CAD Data:

CAD Data: CAD Data:

MBMB

MBMB

MBMB

MBMB

25W

12

15

12

15

T25

T25W

50/60/60

50/50/60/60

200/200/220

380/400/400/440

0.21/0.19/0.19

0.18/0.17/0.17

0.11/0.12/0.11/0.12

0.09/0.09/0.09/0.09

1350/1550/1600

1350/1550/1600

1350/1400/1600/1650

1300/1350/1550/1600

E

N・m kgf・m N kgf

1/ 3

1/ 5

1/ 10

1/ 15

1/ 20

1/ 25

1/ 30

1/ 40

1/ 50

1/ 60

1/ 80

1/100

1/120

1/160

1/200

1/240

1/300

1/360

300153

2220

7

33.535

76.5

50

φ12h7

4-φ6.5 9076

13.5

4

5582.5

11

300

4-φ6.5

5

17 65

90104

97.5

1612522

13

8

374056

90.5

φ15h7

300153

2220

76.5

φ12h7

4-φ6.5

411

8 3

26

21

13.5

32 3277

4377

(φ35)

300

4-φ6.5

φ15h7

90.5

1612522

13

9 3

29

525

17

38 3891

9151

(φ40)

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

Model Code P.D6

Option P.E110P.E54

Lead-Wire/Terminal Box Position Mark

G-Type〔Parallel Shaft〕 3-Phase 25W

GearmotorGearmotor with Brake

G-Type〔Parallel Shaft〕 3-Phase 25WGearmotor

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Standard Voltage (Continuous Rated 4 Poles)

Double Voltage (Continuous Rated 4 Poles)

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Voltage (V)

Rated Current (A)

Rated Rotation Speed (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

Gearmotor Gearmotor with BrakeMotor Capacity

Reduction Ratio

Frame No.

Output Shaft Rotation Speed (rpm)

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

GTR-L Series GTR-L Series

Page 13: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D13D12

Foot Mount Type Gearmotor

Flange Mount Type Gearmotor

LG-12 -3~120-T25LG-12 -3~120-T25WFig.D-5

〔Round Weight 2kg〕

LG-15 -160~360-T25LG-15 -160~360-T25WFig.D-6

〔Round Weight 2.5kg〕 LG-12M-T25 LG-12M-T25W

LG-15M-T25 LG-15M-T25W

FG-12 -3~120-T25FG-12 -3~120-T25WFig.D-7

〔Round Weight 2kg〕

FG-15 -160~360-T25FG-15 -160~360-T25WFig.D-8

〔Round Weight 2.5kg〕 FG-12M-T25 FG-12M-T25W

FG-15M-T25 FG-15M-T25W

LG FG LGN FGN

3-phase 25W

12

15

500

300

150

100

75

60

50

37.5

30

25

18.8

15

12.5

9.4

7.5

6.3

5

4.2

600

360

180

120

90

72

60

45

36

30

22.5

18

15

11.2

9

7.5

6

5

0.03

0.06

0.11

0.17

0.23

0.28

0.34

0.45

0.56

0.68

0.86

1.1

1.3

1.7

2.1

2.6

2.7

2.7

0.29

0.59

1.08

1.67

2.25

2.74

3.33

4.41

5.49

6.66

8.43

10.8

12.7

16.7

20.6

25.5

26.5

26.5

10

20

30

35

40

45

50

50

50

50

50

50

50

70

70

70

70

70

98

196

294

343

392

441

490

490

490

490

490

490

490

686

686

686

686

686

P.D13 Fig.D-5 2kg

P.D13 Fig.D-7 2kg

P.D14 Fig.D-9 2.5kg

P.D14 Fig.D-11 2.5kg

P.D13 Fig.D-6 2.5kg

P.D13 Fig.D-8 2.5kg

P.D14 Fig.D-10 3kg

P.D14 Fig.D-12 3kg

50Hz 60Hz

CAD Data: CAD Data:

CAD Data: CAD Data:

MBMB

MBMB

MBMB

MBMB

25W

12

15

12

15

T25

T25W

50/60/60

50/50/60/60

200/200/220

380/400/400/440

0.21/0.19/0.19

0.18/0.17/0.17

0.11/0.12/0.11/0.12

0.09/0.09/0.09/0.09

1350/1550/1600

1350/1550/1600

1350/1400/1600/1650

1300/1350/1550/1600

E

N・m kgf・m N kgf

1/ 3

1/ 5

1/ 10

1/ 15

1/ 20

1/ 25

1/ 30

1/ 40

1/ 50

1/ 60

1/ 80

1/100

1/120

1/160

1/200

1/240

1/300

1/360

300153

2220

7

33.535

76.5

50

φ12h7

4-φ6.5 9076

13.5

4

5582.5

11

300

4-φ6.5

5

17 65

90104

97.5

1612522

13

8

374056

90.5

φ15h7

300153

2220

76.5

φ12h7

4-φ6.5

411

8 3

26

21

13.5

32 3277

4377

(φ35)

300

4-φ6.5

φ15h7

90.5

1612522

13

9 3

29

525

17

38 3891

9151

(φ40)

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

Model Code P.D6

Option P.E110P.E54

Lead-Wire/Terminal Box Position Mark

G-Type〔Parallel Shaft〕 3-Phase 25W

GearmotorGearmotor with Brake

G-Type〔Parallel Shaft〕 3-Phase 25WGearmotor

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Standard Voltage (Continuous Rated 4 Poles)

Double Voltage (Continuous Rated 4 Poles)

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Voltage (V)

Rated Current (A)

Rated Rotation Speed (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

Gearmotor Gearmotor with BrakeMotor Capacity

Reduction Ratio

Frame No.

Output Shaft Rotation Speed (rpm)

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

GTR-L Series GTR-L Series

Page 14: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D15D14

Foot Mount Type Gearmotor with Brake

Flange Mount Type Gearmotor with Brake

G-Type〔Parallel Shaft〕 3-Phase 25WGearmotor with Brake

LGN-12 -3~120-T25LGN-12 -3~120-T25WFig.D-9

〔Round Weight 2.5kg〕

LGN-15 -160~360-T25LGN-15 -160~360-T25WFig.D-10

〔Round Weight 3kg〕 LGN-12M-T25 LGN-12M-T25W

LGN-15M-T25 LGN-15M-T25W

FGN-12 -3~120-T25FGN-12 -3~120-T25WFig.D-11

〔Round Weight 2.5kg〕

FGN-15 -160~360-T25FGN-15 -160~360-T25WFig.D-12

〔Round Weight 3kg〕 FGN-12M-T25 FGN-12M-T25W

FGN-15M-T25 FGN-15M-T25W

CAD Data: CAD Data:

CAD Data: CAD Data:

MBMB

MBMB

MBMB

MBMB

Foot Mount type Flange Mount type

300300

1882220

7

33.535

76.5

50

φ12h7

4-φ6.5 9076

13.5

4

5582.5

11

300

4-φ6.5

5

17 65

90104

97.5

1962522

13

8

374056

90.5

φ15h7

300

300188

2220

φ12h7

4-φ6.5

411

8 3

26

21

13.5

32 3277

4377

(φ35) 300

76.5

300

4-φ6.5

φ15h7

90.5

1962522

13

9 3

29

525

17

38 3891

9151

(φ40) 300

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Model Code P.D6

Option P.E110P.E54

Lead-Wire/Terminal Box Position Mark

Performance Table/ Dimension

Performance Table/ Dimension

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

GTR-L Series

Page 15: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D15D14

Foot Mount Type Gearmotor with Brake

Flange Mounted Type Gearmotor with Brake

G-Type〔Parallel Shaft〕 3-Phase 25WGearmotor with Brake

LGN-12 -3~120-T25LGN-12 -3~120-T25WFig.D-9

〔Round Weight 2.5kg〕

LGN-15 -160~360-T25LGN-15 -160~360-T25WFig.D-10

〔Round Weight 3kg〕 LGN-12M-T25 LGN-12M-T25W

LGN-15M-T25 LGN-15M-T25W

FGN-12 -3~120-T25FGN-12 -3~120-T25WFig.D-11

〔Round Weight 2.5kg〕

FGN-15 -160~360-T25FGN-15 -160~360-T25WFig.D-12

〔Round Weight 3kg〕 FGN-12M-T25 FGN-12M-T25W

FGN-15M-T25 FGN-15M-T25W

CAD Data: CAD Data:

CAD Data: CAD Data:

MBMB

MBMB

MBMB

MBMB

Foot Mount type Flange Mount type

300300

1882220

7

33.535

76.5

50

φ12h7

4-φ6.5 9076

13.5

4

5582.5

11

300

4-φ6.5

5

17 65

90104

97.5

1962522

13

8

374056

90.5

φ15h7

300

300188

2220

φ12h7

4-φ6.5

411

8 3

26

21

13.5

32 3277

4377

(φ35) 300

76.5

300

4-φ6.5

φ15h7

90.5

1962522

13

9 3

29

525

17

38 3891

9151

(φ40) 300

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Model Code P.D6

Option P.E110P.E54

Lead-Wire/Terminal Box Position Mark

Performance Table/ Dimension

Performance Table/ Dimension

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

GTR-L Series

Page 16: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D17D16

LG-15 -3~360-T40LG-15 -3~360-T40WFig.D-13

〔Round Weight 3kg〕 LG-15M-T40 LG-15M-T40W

FG-15 -3~360-T40FG-15 -3~360-T40WFig.D-14

〔Round Weight 3kg〕 FG-15M-T40 FG-15M-T40W

LGN-15 -3~360-T40LGN-15 -3~360-T40WFig.D-15

〔Round Weight 3kg〕 LGN-15M-T40 LGN-15M-T40W

FGN-15 -3~360-T40FGN-15 -3~360-T40WFig.D-16

〔Round Weight 3kg〕 FGN-15M-T40 FGN-15M-T40W

LG FG LGN FGN

3-phase 40W

15

500

300

150

100

75

60

50

37.5

30

25

18.8

15

12.5

9.4

7.5

6.3

5

4.2

600

360

180

120

90

72

60

45

36

30

22.5

18

15

11.2

9

7.5

6

5

0.05

0.09

0.18

0.27

0.36

0.45

0.54

0.72

0.90

1.1

1.4

1.7

2.1

2.7

2.7

2.7

2.7

2.7

0.49

0.88

1.76

2.65

3.53

4.41

5.29

7.06

8.82

10.8

13.7

16.7

20.6

26.5

26.5

26.5

26.5

26.5

15

30

35

45

50

55

65

70

70

70

70

70

70

70

70

70

70

70

147

294

343

441

490

539

637

686

686

686

686

686

686

686

686

686

686

686

P.D17 Fig.D-13 3kg

P.D17 Fig.D-14 3kg

P.D17 Fig.D-15 3kg

P.D17 Fig.D-16 3kg

50Hz 60Hz

CAD Data: CAD Data:

CAD Data: CAD Data:

MBMB

MBMB

MBMB

MBMB

40W

15

15

T40

T40W

50/60/60

50/50/60/60

200/200/220

380/400/400/440

0.27/0.26/0.26

0.13/0.14/0.13/0.14

1350/1550/1550

1300/1350/1550/1600

E

N・m kgf・m N kgf

1/ 3

1/ 5

1/ 10

1/ 15

1/ 20

1/ 25

1/ 30

1/ 40

1/ 50

1/ 60

1/ 80

1/100

1/120

1/160

1/200

1/240

1/300

1/360

300

4-φ6.5

5

17 65

90104

97.5

1612522

13

8

374056

90.5

φ15h7

300

4-φ6.5

φ15h7

90.5

1612522

13

9 3

29

525

17

38 3891

9151

(φ40)

300

4-φ6.5

5

17 65

90104

97.5

1962522

13

8

374056

90.5

φ15h7

300300

4-φ6.5

φ15h7

90.5

1962522

13

9 3

29

525

17

38 3891

9151

(φ40) 300

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

Model Code P.D6

Option P.E110P.E54

Lead-Wire/Terminal Box Position Mark

GearmotorGearmotor with BrakeG-Type〔Parallel Shaft〕 3-Phase 40W

Foot Mount Type Gearmotor Flange Mounted Type Gearmotor

Foot Mount Type Gearmotor with Brake Flange Mounted Type Gearmotor with Brake

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Standard Voltage (Continuous Rated 4 Poles)

Double Voltage (Continuous Rated 4 Poles)

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Voltage (V)

Rated Current (A)

Rated Rotation Speed (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

Gearmotor Gearmotor with BrakeMotor Capacity

Reduction Ratio

Frame No.

Output Shaft Rotation Speed (rpm)

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

GTR-L Series

Page 17: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D17D16

LG-15 -3~360-T40LG-15 -3~360-T40WFig.D-13

〔Round Weight 3kg〕 LG-15M-T40 LG-15M-T40W

FG-15 -3~360-T40FG-15 -3~360-T40WFig.D-14

〔Round Weight 3kg〕 FG-15M-T40 FG-15M-T40W

LGN-15 -3~360-T40LGN-15 -3~360-T40WFig.D-15

〔Round Weight 3kg〕 LGN-15M-T40 LGN-15M-T40W

FGN-15 -3~360-T40FGN-15 -3~360-T40WFig.D-16

〔Round Weight 3kg〕 FGN-15M-T40 FGN-15M-T40W

LG FG LGN FGN

3-phase 40W

15

500

300

150

100

75

60

50

37.5

30

25

18.8

15

12.5

9.4

7.5

6.3

5

4.2

600

360

180

120

90

72

60

45

36

30

22.5

18

15

11.2

9

7.5

6

5

0.05

0.09

0.18

0.27

0.36

0.45

0.54

0.72

0.90

1.1

1.4

1.7

2.1

2.7

2.7

2.7

2.7

2.7

0.49

0.88

1.76

2.65

3.53

4.41

5.29

7.06

8.82

10.8

13.7

16.7

20.6

26.5

26.5

26.5

26.5

26.5

15

30

35

45

50

55

65

70

70

70

70

70

70

70

70

70

70

70

147

294

343

441

490

539

637

686

686

686

686

686

686

686

686

686

686

686

P.D17 Fig.D-13 3kg

P.D17 Fig.D-14 3kg

P.D17 Fig.D-15 3kg

P.D17 Fig.D-16 3kg

50Hz 60Hz

CAD Data: CAD Data:

CAD Data: CAD Data:

MBMB

MBMB

MBMB

MBMB

40W

15

15

T40

T40W

50/60/60

50/50/60/60

200/200/220

380/400/400/440

0.27/0.26/0.26

0.13/0.14/0.13/0.14

1350/1550/1550

1300/1350/1550/1600

E

N・m kgf・m N kgf

1/ 3

1/ 5

1/ 10

1/ 15

1/ 20

1/ 25

1/ 30

1/ 40

1/ 50

1/ 60

1/ 80

1/100

1/120

1/160

1/200

1/240

1/300

1/360

300

4-φ6.5

5

17 65

90104

97.5

1612522

13

8

374056

90.5

φ15h7

300

4-φ6.5

φ15h7

90.5

1612522

13

9 3

29

525

17

38 3891

9151

(φ40)

300

4-φ6.5

5

17 65

90104

97.5

1962522

13

8

374056

90.5

φ15h7

300300

4-φ6.5

φ15h7

90.5

1962522

13

9 3

29

525

17

38 3891

9151

(φ40) 300

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

Model Code P.D6

Option P.E110P.E54

Lead-Wire/Terminal Box Position Mark

GearmotorGearmotor with BrakeG-Type〔Parallel Shaft〕 3-Phase 40W

Foot Mount Type Gearmotor Flange Mount Type Gearmotor

Foot Mount Type Gearmotor with Brake Flange Mount Type Gearmotor with Brake

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Standard Voltage (Continuous Rated 4 Poles)

Double Voltage (Continuous Rated 4 Poles)

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Voltage (V)

Rated Current (A)

Rated Rotation Speed (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

Gearmotor Gearmotor with BrakeMotor Capacity

Reduction Ratio

Frame No.

Output Shaft Rotation Speed (rpm)

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

GTR-L Series

Page 18: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D18 D19

GTR - LSe r i e s

GType

Parallel Shaft

Gearmotor

1-Phase

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. The Shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on page E30, the shaft rotates clock wise when viewing from output side. (Reter to the diagram shown below.)

【Remarks】

Performance TableDimension diagram

Parallel Shaft

GearmotorGearmotor with BrakeReversible gearmotor

Page 19: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D18 D19

GTR - LSe r i e s

GType

Parallel Shaft

Gearmotor

1-Phase

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. The Shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on page E30, the shaft rotates clock wise when viewing from output side. (Reter to the diagram shown below.)

【Remarks】

Performance TableDimension diagram

Parallel Shaft

GearmotorGearmotor with BrakeReversible gearmotor

Page 20: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D21D20

LG・LGR FG・LGR LGN FGN

1-phase 6W

10

1/ 3

1/ 5

1/ 10

1/ 15

1/ 20

1/ 25

1/ 30

1/ 40

1/ 50

1/ 60

1/ 80

1/100

1/120

1/160

1/200

500

300

150

100

75

60

50

37.5

30

25

18.8

15

12.5

9.4

7.5

600

360

180

120

90

72

60

45

36

30

22.5

18

15

11.2

9

0.008

0.01

0.03

0.04

0.05

0.07

0.08

0.11

0.13

0.16

0.20

0.26

0.31

0.41

0.51

0.078

0.098

0.294

0.392

0.490

0.686

0.784

1.08

1.27

1.57

1.96

2.55

3.04

4.02

5.00

6

8

14

21

25

28

32

35

35

35

35

35

35

35

35

59

78

137

206

245

274

314

343

343

343

343

343

343

343

343

P.D21 Fig.D-17 1.5kg

P.D21 Fig.D-18 1.5kg

P.D21 Fig.D-19 1.5kg

P.D21 Fig.D-20 1.5kg

50Hz 60Hz

6W S06 50/60 0.17/0.17 1300/1600 2.510 E

Standard Voltage 〈4 pole, 30min, rating〉 6W S06 50/60

100/100

100/100 0.20/0.25 1300/1600 3.510 E

LG -10 -3~200-S06LGR-10 -3~200-S06Fig.D-17

〔Round Weight 1.5kg〕 LG-10M-S06 LGR-10M-S06

FG -10 -3~200-S06FGR-10 -3~200-S06Fig.D-18

〔Round Weight 1.5kg〕 FG-10M-S06 FGR-10M-S06

LGN-10 -3~200-S06Fig.D-19

〔Round Weight 1.5kg〕

FGN-10 -3~200-S06Fig.D-20

〔Round Weight 1.5kg〕

CAD Data: CAD Data:

CAD Data:LGN-10M-S06 CAD Data:FGN-10M-S06

MB

MB

MBMB

MBMB

N・m kgf・m N kgf

300

4

11.5

62

4567

754-φ5.5

φ10h7

136

61.5

2018

9

3042

30

6

300

416

3411.5

25 2562

62

4-φ5.5

(φ26)

φ10h7

1362018

9

7 3.5

24

61.5

300

4

11.5

62

4567

754-φ5.5

φ10h7

171

61.5

2018

9

3042

30

6

300 300

416

3411.5

25 2562

62

4-φ5.5

(φ26)

φ10h7

1712018

9

7 3.5

24

61.5

300

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page D19.

Model Code P.D6

Option P.E110P.E54

Lead-Wire/Terminal Box Position Mark

G-Type〔Parallel Shaft〕 1-Phase 6W

Gearmotor・Reversible gearmotorGearmotor with Brake

Foot Mount Type Gearmotor/Reversible gearmotor Flange Mounted Type Gearmotor/Reversible gearmotor

Foot Mount Type Gearmotor with Brake Flange Mounted Type Gearmotor with Brake

Gearmotor/Gearmotor with Brake

Reversible gearmotor

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Standard Voltage (Continuous Rated 4 Poles)

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

Rated Current (A)

Rated Rotation Speed (rpm)

Insulation Classification

Protective system

Frame No.

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

Rated Current (A)

Rated Rotation Speed (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

Totally Enclosed

Gearmotor Reversible gearmotor

Gearmotor with BrakeMotor Capacity

Reduction Ratio

Frame No.

Output Shaft Rotation Speed (rpm)

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

GTR-L Series

Page 21: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D21D20

LG・LGR FG・LGR LGN FGN

1-phase 6W

10

1/ 3

1/ 5

1/ 10

1/ 15

1/ 20

1/ 25

1/ 30

1/ 40

1/ 50

1/ 60

1/ 80

1/100

1/120

1/160

1/200

500

300

150

100

75

60

50

37.5

30

25

18.8

15

12.5

9.4

7.5

600

360

180

120

90

72

60

45

36

30

22.5

18

15

11.2

9

0.008

0.01

0.03

0.04

0.05

0.07

0.08

0.11

0.13

0.16

0.20

0.26

0.31

0.41

0.51

0.078

0.098

0.294

0.392

0.490

0.686

0.784

1.08

1.27

1.57

1.96

2.55

3.04

4.02

5.00

6

8

14

21

25

28

32

35

35

35

35

35

35

35

35

59

78

137

206

245

274

314

343

343

343

343

343

343

343

343

P.D21 Fig.D-17 1.5kg

P.D21 Fig.D-18 1.5kg

P.D21 Fig.D-19 1.5kg

P.D21 Fig.D-20 1.5kg

50Hz 60Hz

6W S06 50/60 0.17/0.17 1300/1600 2.510 E

Standard Voltage 〈4 pole, 30min, rating〉 6W S06 50/60

100/100

100/100 0.20/0.25 1300/1600 3.510 E

LG -10 -3~200-S06LGR-10 -3~200-S06Fig.D-17

〔Round Weight 1.5kg〕 LG-10M-S06 LGR-10M-S06

FG -10 -3~200-S06FGR-10 -3~200-S06Fig.D-18

〔Round Weight 1.5kg〕 FG-10M-S06 FGR-10M-S06

LGN-10 -3~200-S06Fig.D-19

〔Round Weight 1.5kg〕

FGN-10 -3~200-S06Fig.D-20

〔Round Weight 1.5kg〕

CAD Data: CAD Data:

CAD Data:LGN-10M-S06 CAD Data:FGN-10M-S06

MB

MB

MBMB

MBMB

N・m kgf・m N kgf

300

4

11.5

62

4567

754-φ5.5

φ10h7

136

61.5

2018

9

3042

30

6

300

416

3411.5

25 2562

62

4-φ5.5

(φ26)

φ10h7

1362018

9

7 3.5

24

61.5

300

4

11.5

62

4567

754-φ5.5

φ10h7

171

61.5

2018

9

3042

30

6

300 300

416

3411.5

25 2562

62

4-φ5.5

(φ26)

φ10h7

1712018

9

7 3.5

24

61.5

300

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page D19.

Model Code P.D6

Option P.E110P.E54

Lead-Wire/Terminal Box Position Mark

G-Type〔Parallel Shaft〕 1-Phase 6W

Gearmotor・Reversible gearmotorGearmotor with Brake

Foot Mount Type Gearmotor/Reversible gearmotor Flange Mount Type Gearmotor/Reversible gearmotor

Foot Mount Type Gearmotor with Brake Flange Mount Type Gearmotor with Brake

Gearmotor/Gearmotor with Brake

Reversible gearmotor

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Standard Voltage (Continuous Rated 4 Poles)

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

Rated Current (A)

Rated Rotation Speed (rpm)

Insulation Classification

Protective system

Frame No.

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

Rated Current (A)

Rated Rotation Speed (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

Totally Enclosed

Gearmotor Reversible gearmotor

Gearmotor with BrakeMotor Capacity

Reduction Ratio

Frame No.

Output Shaft Rotation Speed (rpm)

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

GTR-L Series

Page 22: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D23D22

S10

S10W

50/60

50/60

100/100

200/200

0.30/0.30

0.17/0.17

1300/1550

1300/1600

10W

3.5

1

10

10

E

S10

S10W

50/60

50/60

100/100

200/200

0.29/0.29

0.17/0.16

1300/1600

1300/1600

Standard Voltage 〈4 pole, 30min, rating〉

Double Voltage 〈4 pole, 30min, rating〉

10W

4.5

1.2

10

10

E

LG -10 -3~200-S10LG -10 -3~200-S10WLGR-10 -3~200-S10LGR-10 -3~200-S10W

Fig.D-21

〔Round Weight 1.5kg〕

LG-10M-S10 LG-10M-S10W LGR-10M-S10 LGR-10M-S10W

FG -10 -3~200-S10FG -10 -3~200-S10WFGR-10 -3~200-S10FGR-10 -3~200-S10W

Fig.D-22

〔Round Weight 1.5kg〕

FG-10M-S10 FG-10M-S10W FGR-10M-S10 FGR-10M-S10W

LGN-10 -3~200-S10LGN-10 -3~200-S10WFig.D-23

〔Round Weight 1.5kg〕 LGN-10M-S10 LGN-10M-S10W

FGN-10 -3~200-S10FGN-10 -3~200-S10WFig.D-24

〔Round Weight 1.5kg〕 FGN-10M-S10 FGN-10M-S10W

CAD Data: CAD Data:

CAD Data: CAD Data:

MBMBMBMB

MBMBMBMB

MBMB

MBMB

LG・LGR FG・LGR LGN FGN

1-phase 10W

10

1/ 3

1/ 5

1/ 10

1/ 15

1/ 20

1/ 25

1/ 30

1/ 40

1/ 50

1/ 60

1/ 80

1/100

1/120

1/160

1/200

500

300

150

100

75

60

50

37.5

30

25

18.8

15

12.5

9.4

7.5

600

360

180

120

90

72

60

45

36

30

22.5

18

15

11.2

9

0.10

0.20

0.39

0.69

0.88

1.08

1.27

1.76

2.16

2.65

3.33

4.21

5.00

6.66

7.84

0.01

0.02

0.04

0.07

0.09

0.11

0.13

0.18

0.22

0.27

0.34

0.43

0.51

0.68

0.8

6

8

14

21

25

28

32

35

35

35

35

35

35

35

35

59

78

137

206

245

274

314

343

343

343

343

343

343

343

343

P.D23 Fig.D-21 1.5kg

P.D23 Fig.D-22 1.5kg

P.D23 Fig.D-23 1.5kg

P.D23 Fig.D-24 1.5kg

50Hz 60Hz N・m kgf・m N kgf

300

4

11.5

62

4567

754-φ5.5

φ10h7

171

61.5

2018

9

3042

30

6

300 300

416

3411.5

25 2562

62

4-φ5.5

(φ26)

φ10h7

1712018

9

7 3.5

24

61.5

300

300

4

11.5

62

4567

754-φ5.5

φ10h7

136

61.5

2018

9

3042

30

6

300

416

3411.5

25 2562

62

4-φ5.5

(φ26)

φ10h7

1362018

9

7 3.5

24

61.5

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page D19.

Model Code P.D6

Option P.E110P.E54

Lead-Wire/Terminal Box Position Mark

G-Type〔Parallel Shaft〕 1-Phase 10W

Gearmotor・Reversible gearmotorGearmotor with Brake

Foot Mount Type Gearmotor/Reversible gearmotor Flange Mounted Type Gearmotor/Reversible gearmotor

Foot Mount Type Gearmotor with Brake Flange Mounted Type Gearmotor with Brake

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Gearmotor/Gearmotor with Brake

Reversible gearmotor

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

Rated Current (A)

Rated Rotation Speed (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

Standard Voltage (Continuous Rated 4 Poles)

Double Voltage (Continuous Rated 4 Poles)

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

Rated Current (A)

Rated Rotation Speed (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

Gearmotor Reversible gearmotor

Gearmotor with BrakeMotor Capacity

Reduction Ratio

Frame No.

Output Shaft Rotation Speed (rpm)

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

GTR-L Series

Page 23: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D23D22

S10

S10W

50/60

50/60

100/100

200/200

0.30/0.30

0.17/0.17

1300/1550

1300/1600

10W

3.5

1

10

10

E

S10

S10W

50/60

50/60

100/100

200/200

0.29/0.29

0.17/0.16

1300/1600

1300/1600

Standard Voltage 〈4 pole, 30min, rating〉

Double Voltage 〈4 pole, 30min, rating〉

10W

4.5

1.2

10

10

E

LG -10 -3~200-S10LG -10 -3~200-S10WLGR-10 -3~200-S10LGR-10 -3~200-S10W

Fig.D-21

〔Round Weight 1.5kg〕

LG-10M-S10 LG-10M-S10W LGR-10M-S10 LGR-10M-S10W

FG -10 -3~200-S10FG -10 -3~200-S10WFGR-10 -3~200-S10FGR-10 -3~200-S10W

Fig.D-22

〔Round Weight 1.5kg〕

FG-10M-S10 FG-10M-S10W FGR-10M-S10 FGR-10M-S10W

LGN-10 -3~200-S10LGN-10 -3~200-S10WFig.D-23

〔Round Weight 1.5kg〕 LGN-10M-S10 LGN-10M-S10W

FGN-10 -3~200-S10FGN-10 -3~200-S10WFig.D-24

〔Round Weight 1.5kg〕 FGN-10M-S10 FGN-10M-S10W

CAD Data: CAD Data:

CAD Data: CAD Data:

MBMBMBMB

MBMBMBMB

MBMB

MBMB

LG・LGR FG・LGR LGN FGN

1-phase 10W

10

1/ 3

1/ 5

1/ 10

1/ 15

1/ 20

1/ 25

1/ 30

1/ 40

1/ 50

1/ 60

1/ 80

1/100

1/120

1/160

1/200

500

300

150

100

75

60

50

37.5

30

25

18.8

15

12.5

9.4

7.5

600

360

180

120

90

72

60

45

36

30

22.5

18

15

11.2

9

0.10

0.20

0.39

0.69

0.88

1.08

1.27

1.76

2.16

2.65

3.33

4.21

5.00

6.66

7.84

0.01

0.02

0.04

0.07

0.09

0.11

0.13

0.18

0.22

0.27

0.34

0.43

0.51

0.68

0.8

6

8

14

21

25

28

32

35

35

35

35

35

35

35

35

59

78

137

206

245

274

314

343

343

343

343

343

343

343

343

P.D23 Fig.D-21 1.5kg

P.D23 Fig.D-22 1.5kg

P.D23 Fig.D-23 1.5kg

P.D23 Fig.D-24 1.5kg

50Hz 60Hz N・m kgf・m N kgf

300

4

11.5

62

4567

754-φ5.5

φ10h7

171

61.5

2018

9

3042

30

6

300 300

416

3411.5

25 2562

62

4-φ5.5

(φ26)

φ10h7

1712018

9

7 3.5

24

61.5

300

300

4

11.5

62

4567

754-φ5.5

φ10h7

136

61.5

2018

9

3042

30

6

300

416

3411.5

25 2562

62

4-φ5.5

(φ26)

φ10h7

1362018

9

7 3.5

24

61.5

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page D19.

Model Code P.D6

Option P.E110P.E54

Lead-Wire/Terminal Box Position Mark

G-Type〔Parallel Shaft〕 1-Phase 10W

Gearmotor・Reversible gearmotorGearmotor with Brake

Foot Mount Type Gearmotor/Reversible gearmotor Flange Mount Type Gearmotor/Reversible gearmotor

Foot Mount Type Gearmotor with Brake Flange Mount Type Gearmotor with Brake

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Gearmotor/Gearmotor with Brake

Reversible gearmotor

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

Rated Current (A)

Rated Rotation Speed (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

Standard Voltage (Continuous Rated 4 Poles)

Double Voltage (Continuous Rated 4 Poles)

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

Rated Current (A)

Rated Rotation Speed (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

Gearmotor Reversible gearmotor

Gearmotor with BrakeMotor Capacity

Reduction Ratio

Frame No.

Output Shaft Rotation Speed (rpm)

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

GTR-L Series

Page 24: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D25D24

S15

S15W

50/60

50/60

0.39/0.35

0.21/0.19

1350/1650

1350/1650

15W

5

1.2

12

12

E

S15

S15W

50/60

50/60

0.35/0.40

0.20/0.20

1400/1700

1400/1700

100/100

200/200

100/100

200/200

15W

6

1.5

12

12

E

LG -12 -3~360-S15LG -12 -3~360-S15WLGR-12 -3~360-S15LGR-12 -3~360-S15W

Fig.D-25

〔Round Weight 2kg〕

LG-12M-S15 LG-12M-S15W LGR-12M-S15 LGR-12M-S15W

FG -12 -3~360-S15FG -12 -3~360-S15WFGR-12 -3~360-S15FGR-12 -3~360-S15W

Fig.D-26

〔Round Weight 2kg〕

FG-12M-S15 FG-12M-S15W FGR-12M-S15 FGR-12M-S15W

LGN-12 -3~360-S15LGN-12 -3~360-S15WFig.D-27

〔Round Weight 2kg〕 LGN-12M-S15 LGN-12M-S15W

FGN-12 -3~360-S15FGN-12 -3~360-S15WFig.D-28

〔Round Weight 2kg〕 FGN-12M-S15 FGN-12M-S15W

CAD Data: CAD Data:

CAD Data: CAD Data:

MBMBMBMB

MBMBMBMB

MBMB

MBMB

LG・LGR FG・LGR LGN FGN

1/ 3

1/ 5

1/ 10

1/ 15

1/ 20

1/ 25

1/ 30

1/ 40

1/ 50

1/ 60

1/ 80

1/100

1/120

1/160

1/200

1/240

1/300

1/360

500

300

150

100

75

60

50

37.5

30

25

18.8

15

12.5

9.4

7.5

6.3

5

4.2

600

360

180

120

90

72

60

45

36

30

22.5

18

15

11.2

9

7.5

6

5

50Hz 60Hz N・m kgf・m N kgf

1-phase 15W

12P.D25 Fig.D-25 2kg

P.D25 Fig.D-26 2kg

P.D25 Fig.D-27 2kg

P.D25 Fig.D-28 2kg

0.02

0.03

0.07

0.10

0.13

0.17

0.20

0.27

0.34

0.40

0.51

0.64

0.76

1.0

1.3

1.5

1.5

1.5

0.20

0.29

0.69

0.98

1.27

1.67

1.96

2.65

3.33

3.92

5.00

6.27

7.45

9.80

12.7

14.7

14.7

14.7

10

20

30

35

40

45

50

50

50

50

50

50

50

50

50

50

50

50

98

196

294

343

392

441

490

490

490

490

490

490

490

490

490

490

490

490

300153

2220

7

33.535

76.5

50

φ12h7

4-φ6.5 9076

13.5

4

5582.5

11

300153

2220

76.5

φ12h7

4-φ6.5

411

8 3

26

21

13.5

32 3277

4377

(φ35)

300300

1882220

7

33.535

76.5

50

φ12h7

4-φ6.5 9076

13.5

4

5582.5

11

300188

2220

φ12h7

4-φ6.5

411

8 3

26

21

13.5

32 3277

4377

(φ35) 300

76.5

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

Model Code P.D6

Option P.E110P.E54

Lead-Wire/Terminal Box Position Mark

G-Type〔Parallel Shaft〕 1-Phase 15W

Gearmotor・Reversible gearmotorGearmotor with Brake

Foot Mount Type Gearmotor/Reversible gearmotor Flange Mounted Type Gearmotor/Reversible gearmotor

Foot Mount Type Gearmotor with Brake Flange Mounted Type Gearmotor with Brake

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Gearmotor/Gearmotor with Brake

Reversible gearmotor

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

Rated Current (A)

Rated Rotation Speed (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

Standard Voltage (Continuous Rated 4 Poles)

Double Voltage (Continuous Rated 4 Poles)

Standard Voltage 〈4 pole, 30min, rating〉

Double Voltage 〈4 pole, 30min, rating〉

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

Rated Current (A)

Rated Rotation Speed (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

Gearmotor Reversible gearmotor

Gearmotor with BrakeMotor Capacity

Reduction Ratio

Frame No.

Output Shaft Rotation Speed (rpm)

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

GTR-L Series

Page 25: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D25D24

S15

S15W

50/60

50/60

0.39/0.35

0.21/0.19

1350/1650

1350/1650

15W

5

1.2

12

12

E

S15

S15W

50/60

50/60

0.35/0.40

0.20/0.20

1400/1700

1400/1700

100/100

200/200

100/100

200/200

15W

6

1.5

12

12

E

LG -12 -3~360-S15LG -12 -3~360-S15WLGR-12 -3~360-S15LGR-12 -3~360-S15W

Fig.D-25

〔Round Weight 2kg〕

LG-12M-S15 LG-12M-S15W LGR-12M-S15 LGR-12M-S15W

FG -12 -3~360-S15FG -12 -3~360-S15WFGR-12 -3~360-S15FGR-12 -3~360-S15W

Fig.D-26

〔Round Weight 2kg〕

FG-12M-S15 FG-12M-S15W FGR-12M-S15 FGR-12M-S15W

LGN-12 -3~360-S15LGN-12 -3~360-S15WFig.D-27

〔Round Weight 2kg〕 LGN-12M-S15 LGN-12M-S15W

FGN-12 -3~360-S15FGN-12 -3~360-S15WFig.D-28

〔Round Weight 2kg〕 FGN-12M-S15 FGN-12M-S15W

CAD Data: CAD Data:

CAD Data: CAD Data:

MBMBMBMB

MBMBMBMB

MBMB

MBMB

LG・LGR FG・LGR LGN FGN

1/ 3

1/ 5

1/ 10

1/ 15

1/ 20

1/ 25

1/ 30

1/ 40

1/ 50

1/ 60

1/ 80

1/100

1/120

1/160

1/200

1/240

1/300

1/360

500

300

150

100

75

60

50

37.5

30

25

18.8

15

12.5

9.4

7.5

6.3

5

4.2

600

360

180

120

90

72

60

45

36

30

22.5

18

15

11.2

9

7.5

6

5

50Hz 60Hz N・m kgf・m N kgf

1-phase 15W

12P.D25 Fig.D-25 2kg

P.D25 Fig.D-26 2kg

P.D25 Fig.D-27 2kg

P.D25 Fig.D-28 2kg

0.02

0.03

0.07

0.10

0.13

0.17

0.20

0.27

0.34

0.40

0.51

0.64

0.76

1.0

1.3

1.5

1.5

1.5

0.20

0.29

0.69

0.98

1.27

1.67

1.96

2.65

3.33

3.92

5.00

6.27

7.45

9.80

12.7

14.7

14.7

14.7

10

20

30

35

40

45

50

50

50

50

50

50

50

50

50

50

50

50

98

196

294

343

392

441

490

490

490

490

490

490

490

490

490

490

490

490

300153

2220

7

33.535

76.5

50

φ12h7

4-φ6.5 9076

13.5

4

5582.5

11

300153

2220

76.5

φ12h7

4-φ6.5

411

8 3

26

21

13.5

32 3277

4377

(φ35)

300300

1882220

7

33.535

76.5

50

φ12h7

4-φ6.5 9076

13.5

4

5582.5

11

300188

2220

φ12h7

4-φ6.5

411

8 3

26

21

13.5

32 3277

4377

(φ35) 300

76.5

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

Model Code P.D6

Option P.E110P.E54

Lead-Wire/Terminal Box Position Mark

G-Type〔Parallel Shaft〕 1-Phase 15W

Gearmotor・Reversible gearmotorGearmotor with Brake

Foot Mount Type Gearmotor/Reversible gearmotor Flange Mount Type Gearmotor/Reversible gearmotor

Foot Mount Type Gearmotor with Brake Flange Mount Type Gearmotor with Brake

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Gearmotor/Gearmotor with Brake

Reversible gearmotor

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

Rated Current (A)

Rated Rotation Speed (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

Standard Voltage (Continuous Rated 4 Poles)

Double Voltage (Continuous Rated 4 Poles)

Standard Voltage 〈4 pole, 30min, rating〉

Double Voltage 〈4 pole, 30min, rating〉

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

Rated Current (A)

Rated Rotation Speed (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

Gearmotor Reversible gearmotor

Gearmotor with BrakeMotor Capacity

Reduction Ratio

Frame No.

Output Shaft Rotation Speed (rpm)

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

GTR-L Series

Page 26: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D27D26

Foot Mount Type Gearmotor/Reversible gearmotorGearmotor/Gearmotor with Brake

Flange Mounted Type Gearmotor/Reversible gearmotor

S25

S25W

100/100

200/200

0.48/0.48

0.44/0.45

0.26/0.25

0.23/0.24

1350/1600

1350/1650

1350/1600

1350/1650

25W

7

7

1.7

1.7

12

15

12

15

0.55/0.65

0.50/0.65

0.26/0.33

0.26/0.35

1400/1650

1400/1650

1400/1650

1400/1650

10

10

2.5

2.5

12

15

12

15

E

Reversible gearmotor

S25

S25W

100/100

200/200

50/60

50/60

50/60

50/60

25W E

LG -12 -3~120-S25LG -12 -3~120-S25WLGR-12 -3~120-S25LGR-12 -3~120-S25W

Fig.D-29

〔Round Weight 2kg〕

LG-12M-S25 LG-12M-S25W LGR-12M-S25 LGR-12M-S25W

LG -15 -160~360-S25LG -15 -160~360-S25WLGR-15 -160~360-S25LGR-15 -160~360-S25W

Fig.D-30

〔Round Weight 2.5kg〕

LG-15M-S25 LG-15M-S25W LGR-15M-S25 LGR-15M-S25W

FG -12 -3~120-S25FG -12 -3~120-S25WFGR-12 -3~120-S25FGR-12 -3~120-S25W

Fig.D-31

〔Round Weight 2kg〕

FG -15 -160~360-S25FG -15 -160~360-S25WFGR-15 -160~360-S25FGR-15 -160~360-S25W

Fig.D-32

〔Round Weight 2.5kg〕

FG-15M-S25 FG-15M-S25W FGR-15M-S25 FGR-15M-S25W

FG-12M-S25 FG-12M-S25W FGR-12M-S25 FGR-12M-S25W

CAD Data: CAD Data:

CAD Data: CAD Data:

MBMBMBMB

MBMBMBMB

MBMBMBMB

MBMBMBMB

LG・LGR FG・LGR LGN FGN

1/ 3

1/ 5

1/ 10

1/ 15

1/ 20

1/ 25

1/ 30

1/ 40

1/ 50

1/ 60

1/ 80

1/100

1/120

1/160

1/200

1/240

1/300

1/360

500

300

150

100

75

60

50

37.5

30

25

18.8

15

12.5

9.4

7.5

6.3

5

4.2

600

360

180

120

90

72

60

45

36

30

22.5

18

15

11.2

9

7.5

6

5

50Hz 60Hz N・m kgf・m N kgf

0.29

0.59

1.08

1.67

2.25

2.74

3.33

4.41

5.49

6.66

8.43

10.8

12.7

16.7

20.6

25.5

26.5

26.5

0.03

0.06

0.11

0.17

0.23

0.28

0.34

0.45

0.56

0.68

0.86

1.1

1.3

1.7

2.1

2.6

2.7

2.7

10

20

30

35

40

45

50

50

50

50

50

50

50

70

70

70

70

70

98

196

294

343

392

441

490

490

490

490

490

490

490

686

686

686

686

686

1-phase 25W

12

15

P.D27 Fig.D-29 2kg

P.D27 Fig.D-31 2kg

P.D28 Fig.D-33 2.5kg

P.D28 Fig.D-35 2.5kg

P.D27 Fig.D-30 2.5kg

P.D27 Fig.D-32 2.5kg

P.D28 Fig.D-34 3kg

P.D28 Fig.D-36 3kg

300153

2220

7

33.535

76.5

50

φ12h7

4-φ6.5 9076

13.5

4

5582.5

11

300

4-φ6.5

5

17 65

90104

97.5

1612522

13

8

374056

90.5

φ15h7

300153

2220

76.5

φ12h7

4-φ6.5

411

8 3

26

21

13.5

32 3277

4377

(φ35)

300

4-φ6.5

φ15h7

90.5

1612522

13

9 3

29

525

17

38 3891

9151

(φ40)

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

Model Code P.D6

Option P.E110P.E54

Lead-Wire/Terminal Box Position Mark

G-Type〔Parallel Shaft〕 1-Phase 25W G-Type〔Parallel Shaft〕 1-Phase 25W

Gearmotor・Reversible gearmotorGearmotor with Brake Gearmotor・Reversible gearmotor

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

Rated Current (A)

Rated Rotation Speed (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

Standard Voltage (Continuous Rated 4 Poles)

Double Voltage (Continuous Rated 4 Poles)

Standard Voltage 〈4 pole, 30min, rating〉

Double Voltage 〈4 pole, 30min, rating〉

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

Rated Current (A)

Rated Rotation Speed (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

Gearmotor Reversible gearmotor

Gearmotor with BrakeMotor Capacity

Reduction Ratio

Frame No.

Output Shaft Rotation Speed (rpm)

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

GTR-L Series GTR-L Series

Page 27: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D27D26

Foot Mount Type Gearmotor/Reversible gearmotorGearmotor/Gearmotor with Brake

Flange Mount Type Gearmotor/Reversible gearmotor

S25

S25W

100/100

200/200

0.48/0.48

0.44/0.45

0.26/0.25

0.23/0.24

1350/1600

1350/1650

1350/1600

1350/1650

25W

7

7

1.7

1.7

12

15

12

15

0.55/0.65

0.50/0.65

0.26/0.33

0.26/0.35

1400/1650

1400/1650

1400/1650

1400/1650

10

10

2.5

2.5

12

15

12

15

E

Reversible gearmotor

S25

S25W

100/100

200/200

50/60

50/60

50/60

50/60

25W E

LG -12 -3~120-S25LG -12 -3~120-S25WLGR-12 -3~120-S25LGR-12 -3~120-S25W

Fig.D-29

〔Round Weight 2kg〕

LG-12M-S25 LG-12M-S25W LGR-12M-S25 LGR-12M-S25W

LG -15 -160~360-S25LG -15 -160~360-S25WLGR-15 -160~360-S25LGR-15 -160~360-S25W

Fig.D-30

〔Round Weight 2.5kg〕

LG-15M-S25 LG-15M-S25W LGR-15M-S25 LGR-15M-S25W

FG -12 -3~120-S25FG -12 -3~120-S25WFGR-12 -3~120-S25FGR-12 -3~120-S25W

Fig.D-31

〔Round Weight 2kg〕

FG -15 -160~360-S25FG -15 -160~360-S25WFGR-15 -160~360-S25FGR-15 -160~360-S25W

Fig.D-32

〔Round Weight 2.5kg〕

FG-15M-S25 FG-15M-S25W FGR-15M-S25 FGR-15M-S25W

FG-12M-S25 FG-12M-S25W FGR-12M-S25 FGR-12M-S25W

CAD Data: CAD Data:

CAD Data: CAD Data:

MBMBMBMB

MBMBMBMB

MBMBMBMB

MBMBMBMB

LG・LGR FG・LGR LGN FGN

1/ 3

1/ 5

1/ 10

1/ 15

1/ 20

1/ 25

1/ 30

1/ 40

1/ 50

1/ 60

1/ 80

1/100

1/120

1/160

1/200

1/240

1/300

1/360

500

300

150

100

75

60

50

37.5

30

25

18.8

15

12.5

9.4

7.5

6.3

5

4.2

600

360

180

120

90

72

60

45

36

30

22.5

18

15

11.2

9

7.5

6

5

50Hz 60Hz N・m kgf・m N kgf

0.29

0.59

1.08

1.67

2.25

2.74

3.33

4.41

5.49

6.66

8.43

10.8

12.7

16.7

20.6

25.5

26.5

26.5

0.03

0.06

0.11

0.17

0.23

0.28

0.34

0.45

0.56

0.68

0.86

1.1

1.3

1.7

2.1

2.6

2.7

2.7

10

20

30

35

40

45

50

50

50

50

50

50

50

70

70

70

70

70

98

196

294

343

392

441

490

490

490

490

490

490

490

686

686

686

686

686

1-phase 25W

12

15

P.D27 Fig.D-29 2kg

P.D27 Fig.D-31 2kg

P.D28 Fig.D-33 2.5kg

P.D28 Fig.D-35 2.5kg

P.D27 Fig.D-30 2.5kg

P.D27 Fig.D-32 2.5kg

P.D28 Fig.D-34 3kg

P.D28 Fig.D-36 3kg

300153

2220

7

33.535

76.5

50

φ12h7

4-φ6.5 9076

13.5

4

5582.5

11

300

4-φ6.5

5

17 65

90104

97.5

1612522

13

8

374056

90.5

φ15h7

300153

2220

76.5

φ12h7

4-φ6.5

411

8 3

26

21

13.5

32 3277

4377

(φ35)

300

4-φ6.5

φ15h7

90.5

1612522

13

9 3

29

525

17

38 3891

9151

(φ40)

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

Model Code P.D6

Option P.E110P.E54

Lead-Wire/Terminal Box Position Mark

G-Type〔Parallel Shaft〕 1-Phase 25W G-Type〔Parallel Shaft〕 1-Phase 25W

Gearmotor・Reversible gearmotorGearmotor with Brake Gearmotor・Reversible gearmotor

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

Rated Current (A)

Rated Rotation Speed (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

Standard Voltage (Continuous Rated 4 Poles)

Double Voltage (Continuous Rated 4 Poles)

Standard Voltage 〈4 pole, 30min, rating〉

Double Voltage 〈4 pole, 30min, rating〉

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

Rated Current (A)

Rated Rotation Speed (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

Gearmotor Reversible gearmotor

Gearmotor with BrakeMotor Capacity

Reduction Ratio

Frame No.

Output Shaft Rotation Speed (rpm)

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

GTR-L Series GTR-L Series

Page 28: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D29D28

G-Type〔Parallel Shaft〕 1-Phase 25WGearmotor with Brake

LGN-12 -3~120-S25LGN-12 -3~120-S25WFig.D-33

〔Round Weight 2.5kg〕

LGN-15 -160~360-S25LGN-15 -160~360-S25WFig.D-34

〔Round Weight 3kg〕 LGN-12M-S25 LGN-12M-S25W

LGN-15M-S25 LGN-15M-S25W

FGN-12 -3~120-S25FGN-12 -3~120-S25WFig.D-35

〔Round Weight 2.5kg〕

FGN-15 -160~360-S25FGN-15 -160~360-S25WFig.D-36

〔Round Weight 3kg〕 FGN-12M-S25 FGN-12M-S25W

FGN-15M-S25 FGN-15M-S25W

CAD Data: CAD Data:

CAD Data: CAD Data:

MBMB

MBMB

MBMB

MBMB

300300

1882220

7

33.535

76.5

50

φ12h7

4-φ6.5 9076

13.5

4

5582.5

11

300

4-φ6.5

5

17 65

90104

97.5

1962522

13

8

374056

90.5

φ15h7

300

300188

2220

φ12h7

4-φ6.5

411

8 3

26

21

13.5

32 3277

4377

(φ35) 300

76.5

300

4-φ6.5

φ15h7

90.5

1962522

13

9 3

29

525

17

38 3891

9151

(φ40) 300

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Model Code P.D6

Option P.E110P.E54

Lead-Wire/Terminal Box Position Mark

Foot Mount Type Gearmotor

Flange Mount Type Gearmotor

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

GTR-L Series

Page 29: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D29D28

G-Type〔Parallel Shaft〕 1-Phase 25WGearmotor with Brake

LGN-12 -3~120-S25LGN-12 -3~120-S25WFig.D-33

〔Round Weight 2.5kg〕

LGN-15 -160~360-S25LGN-15 -160~360-S25WFig.D-34

〔Round Weight 3kg〕 LGN-12M-S25 LGN-12M-S25W

LGN-15M-S25 LGN-15M-S25W

FGN-12 -3~120-S25FGN-12 -3~120-S25WFig.D-35

〔Round Weight 2.5kg〕

FGN-15 -160~360-S25FGN-15 -160~360-S25WFig.D-36

〔Round Weight 3kg〕 FGN-12M-S25 FGN-12M-S25W

FGN-15M-S25 FGN-15M-S25W

CAD Data: CAD Data:

CAD Data: CAD Data:

MBMB

MBMB

MBMB

MBMB

300300

1882220

7

33.535

76.5

50

φ12h7

4-φ6.5 9076

13.5

4

5582.5

11

300

4-φ6.5

5

17 65

90104

97.5

1962522

13

8

374056

90.5

φ15h7

300

300188

2220

φ12h7

4-φ6.5

411

8 3

26

21

13.5

32 3277

4377

(φ35) 300

76.5

300

4-φ6.5

φ15h7

90.5

1962522

13

9 3

29

525

17

38 3891

9151

(φ40) 300

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Model Code P.D6

Option P.E110P.E54

Lead-Wire/Terminal Box Position Mark

Foot Mount Type Gearmotor

Flange Mounted Type Gearmotor

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

GTR-L Series

Page 30: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D31D30

S40

S40W

50/60

50/60

0.61/0.66

0.29/0.34

1350/1650

1350/1600

40W

10

2.5

15

15

E

S40

S40W

50/60

50/60

0.75/0.88

0.37/0.41

1400/1650

1400/1650

100/100

200/200

100/100

200/200

40W

14

3.5

15

15

E

LG -15 -3~360-S40LG -15 -3~360-S40WLGR-15 -3~360-S40LGR-15 -3~360-S40W

Fig.D-37

〔Round Weight 2.5kg〕

LG-15M-S40 LG-15M-S40W LGR-15M-S40 LGR-15M-S40W

FG -15 -3~360-S40FG -15 -3~360-S40WFGR-15 -3~360-S40FGR-15 -3~360-S40W

Fig.D-38

〔Round Weight 2.5kg〕

FG-15M-S40 FG-15M-S40W FGR-15M-S40 FGR-15M-S40W

LGN-15 -3~360-S40LGN-15 -3~360-S40WFig.D-39

〔Round Weight 3kg〕 LGN-15M-S40 LGN-15M-S40W

FGN-15 -3~360-S40FGN-15 -3~360-S40WFig.D-40

〔Round Weight 3kg〕 FGN-15M-S40 FGN-15M-S40W*

CAD Data: CAD Data:

CAD Data: CAD Data:

MBMBMBMB

MBMBMBMB

MBMB

MBMB

LG・LGR FG・LGR LGN FGN

1/ 3

1/ 5

1/ 10

1/ 15

1/ 20

1/ 25

1/ 30

1/ 40

1/ 50

1/ 60

1/ 80

1/100

1/120

1/160

1/200

1/240

1/300

1/360

500

300

150

100

75

60

50

37.5

30

25

18.8

15

12.5

9.4

7.5

6.3

5

4.2

600

360

180

120

90

72

60

45

36

30

22.5

18

15

11.2

9

7.5

6

5

50Hz 60Hz N・m kgf・m N kgf

1-phase 40W

15P.D31 Fig.D-37 2.5kg

P.D31 Fig.D-38 2.5kg

P.D31 Fig.D-39 3kg

P.D31 Fig.D-40 3kg

0.05

0.09

0.18

0.27

0.36

0.45

0.54

0.72

0.90

1.1

1.4

1.7

2.1

2.7

2.7

2.7

2.7

2.7

0.49

0.88

1.76

2.65

3.53

4.41

5.29

7.06

8.82

10.8

13.7

16.7

20.6

26.5

26.5

26.5

26.5

26.5

15

30

35

45

50

55

65

70

70

70

70

70

70

70

70

70

70

70

147

294

343

441

490

539

637

686

686

686

686

686

686

686

686

686

686

686

300

4-φ6.5

5

17 65

90104

97.5

1612522

13

8

374056

90.5

φ15h7

300

4-φ6.5

φ15h7

90.5

1612522

13

9 3

29

525

17

38 3891

9151

(φ40)

300

4-φ6.5

5

17 65

90104

97.5

1962522

13

8

374056

90.5

φ15h7

300300

4-φ6.5

φ15h7

90.5

1962522

13

9 3

29

525

17

38 3891

9151

(φ40) 300

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

Model Code P.D6

Option P.E110P.E54

Lead-Wire/Terminal Box Position Mark

G-Type〔Parallel Shaft〕 1-Phase 40W

Gearmotor・Reversible gearmotorGearmotor with Brake

Gearmotor/Gearmotor with Brake

Reversible gearmotor

Foot Mount Type Gearmotor/Reversible gearmotor Flange Mounted Type Gearmotor/Reversible gearmotor

Foot Mount Type Gearmotor with Brake Flange Mounted Type Gearmotor with Brake

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

Rated Current (A)

Rated Rotation Speed (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

Standard Voltage (Continuous Rated 4 Poles)

Double Voltage (Continuous Rated 4 Poles)

Standard Voltage 〈4 pole, 30min, rating〉

Double Voltage 〈4 pole, 30min, rating〉

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

Rated Current (A)

Rated Rotation Speed (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

Gearmotor Reversible gearmotor

Gearmotor with BrakeMotor Capacity

Reduction Ratio

Frame No.

Output Shaft Rotation Speed (rpm)

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

GTR-L Series

Page 31: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D31D30

S40

S40W

50/60

50/60

0.61/0.66

0.29/0.34

1350/1650

1350/1600

40W

10

2.5

15

15

E

S40

S40W

50/60

50/60

0.75/0.88

0.37/0.41

1400/1650

1400/1650

100/100

200/200

100/100

200/200

40W

14

3.5

15

15

E

LG -15 -3~360-S40LG -15 -3~360-S40WLGR-15 -3~360-S40LGR-15 -3~360-S40W

Fig.D-37

〔Round Weight 2.5kg〕

LG-15M-S40 LG-15M-S40W LGR-15M-S40 LGR-15M-S40W

FG -15 -3~360-S40FG -15 -3~360-S40WFGR-15 -3~360-S40FGR-15 -3~360-S40W

Fig.D-38

〔Round Weight 2.5kg〕

FG-15M-S40 FG-15M-S40W FGR-15M-S40 FGR-15M-S40W

LGN-15 -3~360-S40LGN-15 -3~360-S40WFig.D-39

〔Round Weight 3kg〕 LGN-15M-S40 LGN-15M-S40W

FGN-15 -3~360-S40FGN-15 -3~360-S40WFig.D-40

〔Round Weight 3kg〕 FGN-15M-S40 FGN-15M-S40W*

CAD Data: CAD Data:

CAD Data: CAD Data:

MBMBMBMB

MBMBMBMB

MBMB

MBMB

LG・LGR FG・LGR LGN FGN

1/ 3

1/ 5

1/ 10

1/ 15

1/ 20

1/ 25

1/ 30

1/ 40

1/ 50

1/ 60

1/ 80

1/100

1/120

1/160

1/200

1/240

1/300

1/360

500

300

150

100

75

60

50

37.5

30

25

18.8

15

12.5

9.4

7.5

6.3

5

4.2

600

360

180

120

90

72

60

45

36

30

22.5

18

15

11.2

9

7.5

6

5

50Hz 60Hz N・m kgf・m N kgf

1-phase 40W

15P.D31 Fig.D-37 2.5kg

P.D31 Fig.D-38 2.5kg

P.D31 Fig.D-39 3kg

P.D31 Fig.D-40 3kg

0.05

0.09

0.18

0.27

0.36

0.45

0.54

0.72

0.90

1.1

1.4

1.7

2.1

2.7

2.7

2.7

2.7

2.7

0.49

0.88

1.76

2.65

3.53

4.41

5.29

7.06

8.82

10.8

13.7

16.7

20.6

26.5

26.5

26.5

26.5

26.5

15

30

35

45

50

55

65

70

70

70

70

70

70

70

70

70

70

70

147

294

343

441

490

539

637

686

686

686

686

686

686

686

686

686

686

686

300

4-φ6.5

5

17 65

90104

97.5

1612522

13

8

374056

90.5

φ15h7

300

4-φ6.5

φ15h7

90.5

1612522

13

9 3

29

525

17

38 3891

9151

(φ40)

300

4-φ6.5

5

17 65

90104

97.5

1962522

13

8

374056

90.5

φ15h7

300300

4-φ6.5

φ15h7

90.5

1962522

13

9 3

29

525

17

38 3891

9151

(φ40) 300

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

Model Code P.D6

Option P.E110P.E54

Lead-Wire/Terminal Box Position Mark

G-Type〔Parallel Shaft〕 1-Phase 40W

Gearmotor・Reversible gearmotorGearmotor with Brake

Gearmotor/Gearmotor with Brake

Reversible gearmotor

Foot Mount Type Gearmotor/Reversible gearmotor Flange Mount Type Gearmotor/Reversible gearmotor

Foot Mount Type Gearmotor with Brake Flange Mount Type Gearmotor with Brake

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

Rated Current (A)

Rated Rotation Speed (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

Standard Voltage (Continuous Rated 4 Poles)

Double Voltage (Continuous Rated 4 Poles)

Standard Voltage 〈4 pole, 30min, rating〉

Double Voltage 〈4 pole, 30min, rating〉

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

Rated Current (A)

Rated Rotation Speed (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

Gearmotor Reversible gearmotor

Gearmotor with BrakeMotor Capacity

Reduction Ratio

Frame No.

Output Shaft Rotation Speed (rpm)

Output Shaft Allowable Torque

Output Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

GTR-L Series

Page 32: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D32 D33

GTR - LSe r i e s

GType

Parallel Shaft

Gearmotor

1-Phase

6W~40W

100V 50/60Hz

Class E

Capacitor Start

Totally Enclosed

4

Continuous Rating

Spur gear and Helical gear

Grease Lubrication

New JIS Key(JIS 1301-1976 class)

S43C

Aluminium die-cast

-10℃~40℃

85%max.(without any dew condensation)

1,000m max.

Indoors

Anion painting, Acrylic paint

Grey(Mansel code: 9B6/0.5)

No restriction in the mounting angle.(horizontally, vertically or heeling angle)

Well ventilated place free from corrosive gas, explosive gas vapor and/or dust.

Motor Part

Ambient Conditions

Painting

Mounting Direction

Speed Reduction Part

Number of phase

Capacity

Power Source

Insulation Classification

Starting Method

Protective cooling Method

Number of Pole

Rating

Reduction Method

Lubrication

Output Shaft

Output Shaft Material

Case Material

Ambient Temperature

Ambient Humidity

Altitude

Installation Location

Painting Method

Painting Color

Environment

Model and Type DesignationStandard Model Lineup

Parallel Shaft

Speed control GearmotorSpeed controlGearmotor with Brake

Page 33: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D32 D33

GTR - LSe r i e s

GType

Parallel Shaft

Gearmotor

1-Phase

6W~40W

100V 50/60Hz

Class E

Capacitor Start

Totally Enclosed

4

Continuous Rating

Spur gear and Helical gear

Grease Lubrication

New JIS Key(JIS 1301-1976 class)

S43C

Aluminium die-cast

-10℃~40℃

85%max.(without any dew condensation)

1,000m max.

Indoors

Anion painting, Acrylic paint

Grey(Mansel code: 9B6/0.5)

No restriction in the mounting angle.(horizontally, vertically or heeling angle)

Well ventilated place free from corrosive gas, explosive gas vapor and/or dust.

Motor Part

Ambient Conditions

Painting

Mounting Direction

Speed Reduction Part

Number of phase

Capacity

Power Source

Insulation Classification

Starting Method

Protective cooling Method

Number of Pole

Rating

Reduction Method

Lubrication

Output Shaft

Output Shaft Material

Case Material

Ambient Temperature

Ambient Humidity

Altitude

Installation Location

Painting Method

Painting Color

Environment

Model and Type DesignationStandard Model Lineup

Parallel Shaft

Speed control GearmotorSpeed controlGearmotor with Brake

Page 34: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D35D34

1/3 1/5 1/10 1/15 1/20 1/25 1/30 1/40 1/50

1/60 1/80 1/100 1/120 1/160 1/20010

LGU  FGU LGP  FGP

LGPN FGPN

1/3 1/5 1/10 1/15 1/20 1/25 1/30 1/40 1/50

1/60 1/80 1/100 1/120 1/160 1/20010

1/3 1/5 1/10 1/15 1/20 1/25 1/30 1/40 1/50

1/60 1/80 1/100 1/120 1/160 1/200 1/240 1/300 1/36012

1/3 1/5 1/10 1/15 1/20 1/25 1/30 1/40 1/50

1/60 1/80 1/100 1/120 1/160 1/200 1/240 1/300 1/36015

1/3 1/5 1/10 1/15 1/20 1/25 1/30 1/40 1/50

1/60 1/80 1/100 1/120

1/160 1/200 1/240 1/300 1/360

12

15

P-Type(Controller Sells Separately) U-TypeGTR-L Series Speed control Gearmotor/Speed control Gearmotor with Brake are lassified by codes as shown below. Specify these codes in your inquiry and order.

①Classification by Mount Form

②Series Name

④Frame No. and Diameter of Output shaft

⑤Bearing type

⑥Reduction Ratio

⑦Motor Designation  and Capacity

⑧⑨Option

⑩Auxiliary Mark

L

F

G

Blank

U

P

PN

Output Shaft Diameter

M

B

3 : 1/3 ~ 360 : 1/360

S06

S10

S15

S25

S40

Blank

W

C

Blank

X

: Foot Mount

: Flange Mount

: Parallel Shaft

: With Motor

: With Speed control Gearmotor

: With Speed control Gearmotor

: With Speed control Gearmotor with Brake

: Metal type

: Bearing type

: 1-phase 6W

: 1-phase 10W

: 1-phase 15W

: 1-phase 25W

: 1-phase 40W

: Standard Specifications

: High Voltage

: P-Type Terminal Box

: Standard Specs.

: Mark for Additional Specs.

U-Type(With Controller)

P-Type(Controller Sells Separately)

P-Type(Controller Sells Separately)

1-phase: 100V/50Hz、100V/60Hz

1-phase: 200V/50Hz、200V/60Hz(except for 6W)

Position indicator for lead-wire, terminal box Refer to the indication mark list in P. E54 for details.

L Series(Parallel Shaft) Model and Type Designation Standard Model Lineup

   The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.

Note 1)

Controller■Type DesignationGTR-L Series controllers are classified by codes as shown below.

These codes are required for your inquiry and/or order.

Blank L: U-Type

: P-Type0: variable speed only (U-Type only) 1: variable speed + instant stop 2: variable speed + instant stop + slow start + slow down 3: variable speed + instant stop + slow start + slow down + parallel running

SC: Speed Controller (generic name)

10 : single-phase 100V 20 : single-phase 200V

Function

Voltage

U: U-Type (Attached with gearmotors) P: P-Type (Not included in gearmotors)

Type Voltage Function Motor Type

SC 10 1 LP

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Model and Type Designation

Model and Type Designation

① ② ④ ⑤ ③

G 10 3

S06

⑦ ⑧ ⑨ ⑪ ⑩

LG 15 240 S25F W

MMN

U

G 15 360 S40F BPNC X T6

Type Shaft Arrangement

Auxiliary Mark

Spec. Designation

Frame Number

Motor Capacity OptionReduction

Ratio

③Classification by  Motor Type

⑪Spec. DesignationNote: Spec. Designation does not appear on

the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.

Type Frame Number Reduction Ratio4P Motor

Capacity

Speed control Gearmotor

Speed control Gearmotor with Brake

1-Phase 6W

1-Phase 10W

1-Phase 15W

1-Phase 40W

1-Phase 25W

GTR-L Series

Page 35: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D35D34

1/3 1/5 1/10 1/15 1/20 1/25 1/30 1/40 1/50

1/60 1/80 1/100 1/120 1/160 1/20010

LGU  FGU LGP  FGP

LGPN FGPN

1/3 1/5 1/10 1/15 1/20 1/25 1/30 1/40 1/50

1/60 1/80 1/100 1/120 1/160 1/20010

1/3 1/5 1/10 1/15 1/20 1/25 1/30 1/40 1/50

1/60 1/80 1/100 1/120 1/160 1/200 1/240 1/300 1/36012

1/3 1/5 1/10 1/15 1/20 1/25 1/30 1/40 1/50

1/60 1/80 1/100 1/120 1/160 1/200 1/240 1/300 1/36015

1/3 1/5 1/10 1/15 1/20 1/25 1/30 1/40 1/50

1/60 1/80 1/100 1/120

1/160 1/200 1/240 1/300 1/360

12

15

P-Type(Controller Sells Separately) U-TypeGTR-L Series Speed control Gearmotor/Speed control Gearmotor with Brake are lassified by codes as shown below. Specify these codes in your inquiry and order.

①Classification by Mount Form

②Series Name

④Frame No. and Diameter of Output shaft

⑤Bearing type

⑥Reduction Ratio

⑦Motor Designation  and Capacity

⑧⑨Option

⑩Auxiliary Mark

L

F

G

Blank

U

P

PN

Output Shaft Diameter

M

B

3 : 1/3 ~ 360 : 1/360

S06

S10

S15

S25

S40

Blank

W

C

Blank

X

: Foot Mount

: Flange Mount

: Parallel Shaft

: With Motor

: With Speed control Gearmotor

: With Speed control Gearmotor

: With Speed control Gearmotor with Brake

: Metal type

: Bearing type

: 1-phase 6W

: 1-phase 10W

: 1-phase 15W

: 1-phase 25W

: 1-phase 40W

: Standard Specifications

: High Voltage

: P-Type Terminal Box

: Standard Specs.

: Mark for Additional Specs.

U-Type(With Controller)

P-Type(Controller Sells Separately)

P-Type(Controller Sells Separately)

1-phase: 100V/50Hz、100V/60Hz

1-phase: 200V/50Hz、200V/60Hz(except for 6W)

Position indicator for lead-wire, terminal box Refer to the indication mark list in P. E54 for details.

L Series(Parallel Shaft) Model and Type Designation Standard Model Lineup

   The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.

Note 1)

Controller■Type DesignationGTR-L Series controllers are classified by codes as shown below.

These codes are required for your inquiry and/or order.

Blank L: U-Type

: P-Type0: variable speed only (U-Type only) 1: variable speed + instant stop 2: variable speed + instant stop + slow start + slow down 3: variable speed + instant stop + slow start + slow down + parallel running

SC: Speed Controller (generic name)

10 : single-phase 100V 20 : single-phase 200V

Function

Voltage

U: U-Type (Attached with gearmotors) P: P-Type (Not included in gearmotors)

Type Voltage Function Motor Type

SC 10 1 LP

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Model and Type Designation

Model and Type Designation

① ② ④ ⑤ ③

G 10 3

S06

⑦ ⑧ ⑨ ⑪ ⑩

LG 15 240 S25F W

MMN

U

G 15 360 S40F BPNC X T6

Type Shaft Arrangement

Auxiliary Mark

Spec. Designation

Frame Number

Motor Capacity OptionReduction

Ratio

③Classification by  Motor Type

⑪Spec. DesignationNote: Spec. Designation does not appear on

the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.

Type Frame Number Reduction Ratio4P Motor

Capacity

Speed control Gearmotor

Speed control Gearmotor with Brake

1-Phase 6W

1-Phase 10W

1-Phase 15W

1-Phase 40W

1-Phase 25W

GTR-L Series

Page 36: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D36 D37

GTR - LSe r i e s

GType

Parallel Shaft

Gearmotor

1-Phase

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. Allowable torques at high speed (N・m{kgf・m}) indicate the value in the range of high rotating speed(rpm). The percentage(%) at the allowable torque of 50% indicate the percentage against the allowable torque at high speed. The Shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on page E30, the shaft rotates clock wise when viewing from output side. (Reter to the diagram shown below.)

【Remarks】

Performance TableDimension diagram

Speed control GearmotorSpeed controlGearmotor with Brake

Parallel Shaft

Page 37: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D36 D37

GTR - LSe r i e s

GType

Parallel Shaft

Gearmotor

1-Phase

The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. Allowable torques at high speed (N・m{kgf・m}) indicate the value in the range of high rotating speed(rpm). The percentage(%) at the allowable torque of 50% indicate the percentage against the allowable torque at high speed. The Shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on page E30, the shaft rotates clock wise when viewing from output side. (Reter to the diagram shown below.)

【Remarks】

Performance TableDimension diagram

Speed control GearmotorSpeed controlGearmotor with Brake

Parallel Shaft

Page 38: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D39D38

G-Type〔Parallel Shaft〕 1-Phase 6W

Speed control gearmotorsSpeed control brake motors

LGU・LGP FGU・FGP LGPN FGPN

1-phase 6W

10

1/ 3

1/ 5

1/ 10

1/ 15

1/ 20

1/ 25

1/ 30

1/ 40

1/ 50

1/ 60

1/ 80

1/100

1/120

1/160

1/200

500

300

150

100

75

60

50

37.5

30

25

18.8

15

12.5

9.4

7.5

600

360

180

120

90

72

60

45

36

30

22.5

18

15

11.2

9

6

8

14

21

25

28

32

35

35

35

35

35

35

35

35

59

78

137

206

245

274

314

343

343

343

343

343

343

343

343

0.078

0.098

0.294

0.392

0.490

0.686

0.784

1.08

1.27

1.57

1.96

2.55

3.04

4.02

5.0

0.008

0.01

0.03

0.04

0.05

0.07

0.08

0.11

0.13

0.16

0.20

0.26

0.31

0.41

0.51

P.D39 Fig.D-41 1.5kg

P.D39 Fig.D-42 1.5kg

P.D39 Fig.D-43 1.5kg

P.D39 Fig.D-44 1.5kg

50Hz 60Hz kgf・mN・mkgfN

6W S06 50/60100/100 0.25/0.25 500~1300/50~1600 2.510 ELGU-10 -3~200-S06LGP-10 -3~200-S06Fig.D-41

〔Round Weight 1.5kg〕

FGU-10 -3~200-S06FGP-10 -3~200-S06Fig.D-42

〔Round Weight 1.5kg〕

LGPN-10 -3~200-S06Fig.D-43

〔Round Weight 1.5kg〕

FGPN-10 -3~200-S06Fig.D-44

〔Round Weight 1.5kg〕

50rpm (%)

100

■100V1-Phase 6W

MBMB

MBMB

MB

MB

LGU-10M-S06 LGP-10M-S06CAD Data: FGU-10M-S06

FGP-10M-S06CAD Data:

CAD Data: LGPN-10M-S06 CAD Data: FGPN-10M-S06

300

4

11.5

62

4567

754-φ5.5

φ10h7

61.5

2018

9

3042

30

6

300

146.8300

416

3411.5

25 2562

62

4-φ5.5

(φ26)

φ10h7

2018

9

7 3.5

24

61.5

146.8

300

300

4

11.5

62

4567

754-φ5.5

φ10h7

61.5

2018

9

3042

30

6

300300

181.3300

416

3411.5

25 2562

62

4-φ5.5

(φ26)

φ10h7

2018

9

7 3.5

24

61.5

300300

181.3

50Hz60Hz

500 1000 1500Rotation Speed〔rpm〕

200

150

100

50

0

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page D19.

Model Code P.D34

Option P.E110~E112P.E54

Lead-Wire/Terminal Box Position Mark

Foot Mount Type Speed control gearmotor with Brake Flange Mounted Type Speed control gearmotor with Brake

Foot Mount Type Speed control gearmotor Flange Mounted Type Speed control gearmotor

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Standard Voltage (Continuous Rated 4 Poles)

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

MAX Current (A)

High speed rotation range (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

high speed Motor Capacity

Reduction Ratio

Frame No.

Output Shaft Rotation Speed (rpm)

Output Shaft Allowable TorqueOutput Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Torque〔

%〕

As for motor-type:"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type Lead wire with connector 150mmMotor lead wire 300mm Lead wire for generator 300mm (white・white)

P-type

Torque-Rotation Speed Characteristic Graph Note) 100% torque shows the allowable torque at high speed.

GTR-L Series

Page 39: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D39D38

G-Type〔Parallel Shaft〕 1-Phase 6W

Speed control gearmotorsSpeed control brake motors

LGU・LGP FGU・FGP LGPN FGPN

1-phase 6W

10

1/ 3

1/ 5

1/ 10

1/ 15

1/ 20

1/ 25

1/ 30

1/ 40

1/ 50

1/ 60

1/ 80

1/100

1/120

1/160

1/200

500

300

150

100

75

60

50

37.5

30

25

18.8

15

12.5

9.4

7.5

600

360

180

120

90

72

60

45

36

30

22.5

18

15

11.2

9

6

8

14

21

25

28

32

35

35

35

35

35

35

35

35

59

78

137

206

245

274

314

343

343

343

343

343

343

343

343

0.078

0.098

0.294

0.392

0.490

0.686

0.784

1.08

1.27

1.57

1.96

2.55

3.04

4.02

5.0

0.008

0.01

0.03

0.04

0.05

0.07

0.08

0.11

0.13

0.16

0.20

0.26

0.31

0.41

0.51

P.D39 Fig.D-41 1.5kg

P.D39 Fig.D-42 1.5kg

P.D39 Fig.D-43 1.5kg

P.D39 Fig.D-44 1.5kg

50Hz 60Hz kgf・mN・mkgfN

6W S06 50/60100/100 0.25/0.25 500~1300/50~1600 2.510 ELGU-10 -3~200-S06LGP-10 -3~200-S06Fig.D-41

〔Round Weight 1.5kg〕

FGU-10 -3~200-S06FGP-10 -3~200-S06Fig.D-42

〔Round Weight 1.5kg〕

LGPN-10 -3~200-S06Fig.D-43

〔Round Weight 1.5kg〕

FGPN-10 -3~200-S06Fig.D-44

〔Round Weight 1.5kg〕

50rpm (%)

100

■100V1-Phase 6W

MBMB

MBMB

MB

MB

LGU-10M-S06 LGP-10M-S06CAD Data: FGU-10M-S06

FGP-10M-S06CAD Data:

CAD Data: LGPN-10M-S06 CAD Data: FGPN-10M-S06

300

4

11.5

62

4567

754-φ5.5

φ10h7

61.5

2018

9

3042

30

6

300

146.8300

416

3411.5

25 2562

62

4-φ5.5

(φ26)

φ10h7

2018

9

7 3.5

24

61.5

146.8

300

300

4

11.5

62

4567

754-φ5.5

φ10h7

61.5

2018

9

3042

30

6

300300

181.3300

416

3411.5

25 2562

62

4-φ5.5

(φ26)

φ10h7

2018

9

7 3.5

24

61.5

300300

181.3

50Hz60Hz

500 1000 1500Rotation Speed〔rpm〕

200

150

100

50

0

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page D19.

Model Code P.D34

Option P.E110~E112P.E54

Lead-Wire/Terminal Box Position Mark

Foot Mount Type Speed control gearmotor with Brake Flange Mount Type Speed control gearmotor with Brake

Foot Mount Type Speed control gearmotor Flange Mount Type Speed control gearmotor

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Standard Voltage (Continuous Rated 4 Poles)

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

MAX Current (A)

High speed rotation range (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

high speed Motor Capacity

Reduction Ratio

Frame No.

Output Shaft Rotation Speed (rpm)

Output Shaft Allowable TorqueOutput Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Torque〔

%〕

As for motor-type:"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type Lead wire with connector 150mmMotor lead wire 300mm Lead wire for generator 300mm (white・white)

P-Type

Torque-Rotation Speed Characteristic Graph Note) 100% torque shows the allowable torque at high speed.

GTR-L Series

Page 40: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D41D40

10W

S10

S10W

50/60

50/60

100/100

200/200

0.35/0.35

0.2/0.2

500~1300/500~1600

450~1300/500~1600

3.5

1

10

10

E

LGU-10 -3~200-S10LGU-10 -3~200-S10WLGP-10 -3~200-S10LGP-10 -3~200-S10W

Fig.D-45

〔Round Weight 1.5kg〕

FGU-10 -3~200-S10FGU-10 -3~200-S10WFGP-10 -3~200-S10FGP-10 -3~200-S10W

Fig.D-46

〔Round Weight 1.5kg〕

LGPN-10 -3~200-S10LGPN-10 -3~200-S10WFig.D-47

〔Round Weight 1.5kg〕

FGPN-10 -3~200-S10FGPN-10 -3~200-S10WFig.D-48

〔Round Weight 1.5kg〕

LGU・LGP FGU・FGP LGPN FGPN

1-phase 10W

10

1/ 3

1/ 5

1/ 10

1/ 15

1/ 20

1/ 25

1/ 30

1/ 40

1/ 50

1/ 60

1/ 80

1/100

1/120

1/160

1/200

500

300

150

100

75

60

50

37.5

30

25

18.8

15

12.5

9.4

7.5

600

360

180

120

90

72

60

45

36

30

22.5

18

15

11.2

9

6

8

14

21

25

28

32

35

35

35

35

35

35

35

35

59

78

137

206

245

274

314

343

343

343

343

343

343

343

343

0.01

0.02

0.04

0.07

0.09

0.11

0.13

0.18

0.22

0.27

0.34

0.43

0.51

0.68

0.8

0.10

0.20

0.39

0.69

0.88

1.08

1.27

1.76

2.16

2.65

3.33

4.21

5.00

6.66

7.84

P.D41 Fig.D-45 1.5kg

P.D41 Fig.D-46 1.5kg

P.D41 Fig.D-47 1.5kg

P.D41 Fig.D-48 1.5kg

50Hz 60Hz50rpm (%)

70

■100V ■200V1-Phase 10W

MBMBMBMB

MBMBMBMB

MBMB

MBMB

LGU-10M-S10 LGU-10M-S10W LGP-10M-S10 LGP-10M-S10W

LGPN-10M-S10 LGPN-10M-S10W

CAD Data: FGU-10M-S10 FGU-10M-S10W FGP-10M-S10 FGP-10M-S10W

CAD Data:

CAD Data: FGPN-10M-S10 FGPN-10M-S10WCAD Data:

kgf・mN・mkgfN

(100V) (200V)

300

4

11.5

62

4567

754-φ5.5

φ10h7

61.5

2018

9

3042

30

6

300

146.8300

416

3411.5

25 2562

62

4-φ5.5

(φ26)

φ10h7

2018

9

7 3.5

24

61.5

146.8

300

300

4

11.5

62

4567

754-φ5.5

φ10h7

61.5

2018

9

3042

30

6

300300

181.3300

416

3411.5

25 2562

62

4-φ5.5

(φ26)

φ10h7

2018

9

7 3.5

24

61.5

300300

181.3

50Hz60Hz

500 1000 1500Rotation Speed〔rpm〕 Rotation Speed〔rpm〕

200

150

100

50

0

50Hz60Hz

500 1000 1500

200

150

100

50

0

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page D19.

Model Code P.D34

Option P.E110~E112P.E54

Lead-Wire/Terminal Box Position Mark

G-Type〔Parallel Shaft〕 1-Phase 10W

Speed control gearmotorsSpeed control brake motors

Foot Mount Type Speed control gearmotor with Brake Flange Mounted Type Speed control gearmotor with Brake

Foot Mount Type Speed control gearmotor Flange Mounted Type Speed control gearmotor

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Standard Voltage (Continuous Rated 4 Poles)

Double Voltage (Continuous Rated 4 Poles)

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

MAX Current (A)

High speed rotation range (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

high speed Motor Capacity

Reduction Ratio

Frame No.

Output Shaft Rotation Speed (rpm)

Output Shaft Allowable TorqueOutput Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Torque-Rotation Speed Characteristic Graph Note) 100% torque shows the allowable torque at high speed.

Torque〔

%〕

Torque〔

%〕

As for motor-type:"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type Lead wire with connector 150mmMotor lead wire 300mm Lead wire for generator 300mm (white・white)

P-type

GTR-L Series

Page 41: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D41D40

10W

S10

S10W

50/60

50/60

100/100

200/200

0.35/0.35

0.2/0.2

500~1300/500~1600

450~1300/500~1600

3.5

1

10

10

E

LGU-10 -3~200-S10LGU-10 -3~200-S10WLGP-10 -3~200-S10LGP-10 -3~200-S10W

Fig.D-45

〔Round Weight 1.5kg〕

FGU-10 -3~200-S10FGU-10 -3~200-S10WFGP-10 -3~200-S10FGP-10 -3~200-S10W

Fig.D-46

〔Round Weight 1.5kg〕

LGPN-10 -3~200-S10LGPN-10 -3~200-S10WFig.D-47

〔Round Weight 1.5kg〕

FGPN-10 -3~200-S10FGPN-10 -3~200-S10WFig.D-48

〔Round Weight 1.5kg〕

LGU・LGP FGU・FGP LGPN FGPN

1-phase 10W

10

1/ 3

1/ 5

1/ 10

1/ 15

1/ 20

1/ 25

1/ 30

1/ 40

1/ 50

1/ 60

1/ 80

1/100

1/120

1/160

1/200

500

300

150

100

75

60

50

37.5

30

25

18.8

15

12.5

9.4

7.5

600

360

180

120

90

72

60

45

36

30

22.5

18

15

11.2

9

6

8

14

21

25

28

32

35

35

35

35

35

35

35

35

59

78

137

206

245

274

314

343

343

343

343

343

343

343

343

0.01

0.02

0.04

0.07

0.09

0.11

0.13

0.18

0.22

0.27

0.34

0.43

0.51

0.68

0.8

0.10

0.20

0.39

0.69

0.88

1.08

1.27

1.76

2.16

2.65

3.33

4.21

5.00

6.66

7.84

P.D41 Fig.D-45 1.5kg

P.D41 Fig.D-46 1.5kg

P.D41 Fig.D-47 1.5kg

P.D41 Fig.D-48 1.5kg

50Hz 60Hz50rpm (%)

70

■100V ■200V1-Phase 10W

MBMBMBMB

MBMBMBMB

MBMB

MBMB

LGU-10M-S10 LGU-10M-S10W LGP-10M-S10 LGP-10M-S10W

LGPN-10M-S10 LGPN-10M-S10W

CAD Data: FGU-10M-S10 FGU-10M-S10W FGP-10M-S10 FGP-10M-S10W

CAD Data:

CAD Data: FGPN-10M-S10 FGPN-10M-S10WCAD Data:

kgf・mN・mkgfN

(100V) (200V)

300

4

11.5

62

4567

754-φ5.5

φ10h7

61.5

2018

9

3042

30

6

300

146.8300

416

3411.5

25 2562

62

4-φ5.5

(φ26)

φ10h7

2018

9

7 3.5

24

61.5

146.8

300

300

4

11.5

62

4567

754-φ5.5

φ10h7

61.5

2018

9

3042

30

6

300300

181.3300

416

3411.5

25 2562

62

4-φ5.5

(φ26)

φ10h7

2018

9

7 3.5

24

61.5

300300

181.3

50Hz60Hz

500 1000 1500Rotation Speed〔rpm〕 Rotation Speed〔rpm〕

200

150

100

50

0

50Hz60Hz

500 1000 1500

200

150

100

50

0

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page D19.

Model Code P.D34

Option P.E110~E112P.E54

Lead-Wire/Terminal Box Position Mark

G-Type〔Parallel Shaft〕 1-Phase 10W

Speed control gearmotorsSpeed control brake motors

Foot Mount Type Speed control gearmotor with Brake Flange Mount Type Speed control gearmotor with Brake

Foot Mount Type Speed control gearmotor Flange Mount Type Speed control gearmotor

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Standard Voltage (Continuous Rated 4 Poles)

Double Voltage (Continuous Rated 4 Poles)

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

MAX Current (A)

High speed rotation range (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

high speed Motor Capacity

Reduction Ratio

Frame No.

Output Shaft Rotation Speed (rpm)

Output Shaft Allowable TorqueOutput Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Torque-Rotation Speed Characteristic Graph Note) 100% torque shows the allowable torque at high speed.

Torque〔

%〕

Torque〔

%〕

As for motor-type:"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type Lead wire with connector 150mmMotor lead wire 300mm Lead wire for generator 300mm (white・white)

P-Type

GTR-L Series

Page 42: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D43D42

15W

S15

S15W

50/60

50/60

100/100

200/200

0.6/0.6

0.3/0.3

500~1350/550~1650

600~1400/750~1700

6

1.5

12

12

E

LGU-12 -3~360-S15LGU-12 -3~360-S15WLGP-12 -3~360-S15LGP-12 -3~360-S15W

Fig.D-49

〔Round Weight 2kg〕

LGU-12M-S15 LGU-12M-S15W LGP-12M-S15 LGP-12M-S15W

LGPN-12M-S15 LGPN-12M-S15W

FGU-12 -3~360-S15FGU-12 -3~360-S15WFGP-12 -3~360-S15FGP-12 -3~360-S15W

Fig.D-50

〔Round Weight 2kg〕

LGPN-12 -3~360-S15LGPN-12 -3~360-S15WFig.D-51

〔Round Weight 2.5kg〕

FGPN-12 -3~360-S15FGPN-12 -3~360-S15WFig.D-52

〔Round Weight 2.5kg〕

LGU・LGP FGU・FGP LGPN FGPN

1-phase 15W

12

1/ 3

1/ 5

1/ 10

1/ 15

1/ 20

1/ 25

1/ 30

1/ 40

1/ 50

1/ 60

1/ 80

1/100

1/120

1/160

1/200

1/240

500

300

150

100

75

60

50

37.5

30

25

18.8

15

12.5

9.4

7.5

6.3

600

360

180

120

90

72

60

45

36

30

22.5

18

15

11.2

9

7.5

10

20

30

35

40

45

50

50

50

50

50

50

50

50

50

50

0.02

0.03

0.07

0.10

0.13

0.17

0.20

0.27

0.34

0.40

0.51

0.64

0.76

1.0

1.3

1.5

P.D43 Fig.D-49 2kg

P.D43 Fig.D-50 2kg

P.D43 Fig.D-51 2.5kg

P.D43 Fig.D-52 2.5kg

50Hz 60Hz50rpm (%)

90(100V)

75(200V)

70(100V)

60(200V)

1/300

1/360

5

4.2

6

5

50

50

98

196

294

343

392

441

490

490

490

490

490

490

490

490

490

490

490

490

1.5

1.5

0.20

0.29

0.69

0.98

1.27

1.67

1.96

2.65

3.33

3.92

5.00

6.27

7.45

9.80

12.7

14.7

14.7

14.7

■100V ■200V

CAD Data: FGU-12M-S15 FGU-12M-S15W FGP-12M-S15 FGP-12M-S15W

CAD Data:

CAD Data: FGPN-12M-S15 FGPN-12M-S15WCAD Data:

MBMBMBMB

MBMBMBMB

MBMB

MBMB

kgf・mN・mkgfN

300 2220

7

33.535

76.5

50

φ12h7

4-φ6.5 9076

13.5

4

5582.5

11

300

163.8300

3002220

76.5

φ12h7

4-φ6.5

411

8 3

26

21

13.5

32 3277

4377

(φ35)

163.8

3003002220

7

33.535

76.5

50

φ12h7

4-φ6.5 9076

13.5

4

5582.5

11

300

198.3300

198.32220

φ12h7

4-φ6.5

411

8 3

26

21

13.5

32 3277

4377

(φ35) 300

76.5

300

50Hz60Hz

500 1000 1500

200

150

100

50

0

50Hz60Hz

500 1000 1500

200

150

100

50

0

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

Model Code P.D34

Option P.E110~E112P.E54

Lead-Wire/Terminal Box Position Mark

G-Type〔Parallel Shaft〕 1-Phase 15W

Speed control gearmotorsSpeed control brake motors

Foot Mount Type Speed control gearmotor with Brake Flange Mounted Type Speed control gearmotor with Brake

Foot Mount Type Speed control gearmotor Flange Mounted Type Speed control gearmotor

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Standard Voltage (Continuous Rated 4 Poles)

Double Voltage (Continuous Rated 4 Poles)

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

MAX Current (A)

High speed rotation range (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

high speed Motor Capacity

Reduction Ratio

Frame No.

Output Shaft Rotation Speed (rpm)

Output Shaft Allowable TorqueOutput Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

As for motor-type:"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type Lead wire with connector 150mmMotor lead wire 300mm Lead wire for generator 300mm (white・white)

P-type

1-Phase 15W

Torque-Rotation Speed Characteristic Graph Note) 100% torque shows the allowable torque at high speed.

Torque〔

%〕

Torque〔

%〕

Rotation Speed〔rpm〕 Rotation Speed〔rpm〕

GTR-L Series

Page 43: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D43D42

15W

S15

S15W

50/60

50/60

100/100

200/200

0.6/0.6

0.3/0.3

500~1350/550~1650

600~1400/750~1700

6

1.5

12

12

E

LGU-12 -3~360-S15LGU-12 -3~360-S15WLGP-12 -3~360-S15LGP-12 -3~360-S15W

Fig.D-49

〔Round Weight 2kg〕

LGU-12M-S15 LGU-12M-S15W LGP-12M-S15 LGP-12M-S15W

LGPN-12M-S15 LGPN-12M-S15W

FGU-12 -3~360-S15FGU-12 -3~360-S15WFGP-12 -3~360-S15FGP-12 -3~360-S15W

Fig.D-50

〔Round Weight 2kg〕

LGPN-12 -3~360-S15LGPN-12 -3~360-S15WFig.D-51

〔Round Weight 2.5kg〕

FGPN-12 -3~360-S15FGPN-12 -3~360-S15WFig.D-52

〔Round Weight 2.5kg〕

LGU・LGP FGU・FGP LGPN FGPN

1-phase 15W

12

1/ 3

1/ 5

1/ 10

1/ 15

1/ 20

1/ 25

1/ 30

1/ 40

1/ 50

1/ 60

1/ 80

1/100

1/120

1/160

1/200

1/240

500

300

150

100

75

60

50

37.5

30

25

18.8

15

12.5

9.4

7.5

6.3

600

360

180

120

90

72

60

45

36

30

22.5

18

15

11.2

9

7.5

10

20

30

35

40

45

50

50

50

50

50

50

50

50

50

50

0.02

0.03

0.07

0.10

0.13

0.17

0.20

0.27

0.34

0.40

0.51

0.64

0.76

1.0

1.3

1.5

P.D43 Fig.D-49 2kg

P.D43 Fig.D-50 2kg

P.D43 Fig.D-51 2.5kg

P.D43 Fig.D-52 2.5kg

50Hz 60Hz50rpm (%)

90(100V)

75(200V)

70(100V)

60(200V)

1/300

1/360

5

4.2

6

5

50

50

98

196

294

343

392

441

490

490

490

490

490

490

490

490

490

490

490

490

1.5

1.5

0.20

0.29

0.69

0.98

1.27

1.67

1.96

2.65

3.33

3.92

5.00

6.27

7.45

9.80

12.7

14.7

14.7

14.7

■100V ■200V

CAD Data: FGU-12M-S15 FGU-12M-S15W FGP-12M-S15 FGP-12M-S15W

CAD Data:

CAD Data: FGPN-12M-S15 FGPN-12M-S15WCAD Data:

MBMBMBMB

MBMBMBMB

MBMB

MBMB

kgf・mN・mkgfN

300 2220

7

33.535

76.5

50

φ12h7

4-φ6.5 9076

13.5

4

5582.5

11

300

163.8300

3002220

76.5

φ12h7

4-φ6.5

411

8 3

26

21

13.5

32 3277

4377

(φ35)

163.8

3003002220

7

33.535

76.5

50

φ12h7

4-φ6.5 9076

13.5

4

5582.5

11

300

198.3300

198.32220

φ12h7

4-φ6.5

411

8 3

26

21

13.5

32 3277

4377

(φ35) 300

76.5

300

50Hz60Hz

500 1000 1500

200

150

100

50

0

50Hz60Hz

500 1000 1500

200

150

100

50

0

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

Model Code P.D34

Option P.E110~E112P.E54

Lead-Wire/Terminal Box Position Mark

G-Type〔Parallel Shaft〕 1-Phase 15W

Speed control gearmotorsSpeed control brake motors

Foot Mount Type Speed control gearmotor with Brake Flange Mount Type Speed control gearmotor with Brake

Foot Mount Type Speed control gearmotor Flange Mount Type Speed control gearmotor

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Standard Voltage (Continuous Rated 4 Poles)

Double Voltage (Continuous Rated 4 Poles)

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

MAX Current (A)

High speed rotation range (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

high speed Motor Capacity

Reduction Ratio

Frame No.

Output Shaft Rotation Speed (rpm)

Output Shaft Allowable TorqueOutput Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

As for motor-type:"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type Lead wire with connector 150mmMotor lead wire 300mm Lead wire for generator 300mm (white・white)

P-Type

1-Phase 15W

Torque-Rotation Speed Characteristic Graph Note) 100% torque shows the allowable torque at high speed.

Torque〔

%〕

Torque〔

%〕

Rotation Speed〔rpm〕 Rotation Speed〔rpm〕

GTR-L Series

Page 44: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D45D44

Foot Mount Type Speed control gearmotor

Flange Mounted Type Speed control gearmotor

25W

S25

S25W

50/60

50/60

100/100

200/200

0.6/0.6

0.7/0.7

0.4/0.4

0.4/0.4

750~1350/1000~1650

550~1400/650~1650

850~1350/1000~1650

600~1350/800~1650

8

8

2

2

12

15

12

15

E

LGU-12 -3~120-S25LGU-12 -3~120-S25WLGP-12 -3~120-S25LGP-12 -3~120-S25W

Fig.D-53

〔Round Weight 2kg〕

LGU-15 -160~360-S25LGU-15 -160~360-S25WLGP-15 -160~360-S25LGP-15 -160~360-S25W

Fig.D-54

〔Round Weight 2.5kg〕

FGU-12 -3~120-S25FGU-12 -3~120-S25WFGP-12 -3~120-S25FGP-12 -3~120-S25W

Fig.D-55

〔Round Weight 2kg〕

FGU-15 -160~360-S25FGU-15 -160~360-S25WFGP-15 -160~360-S25FGP-15 -160~360-S25W

Fig.D-56

〔Round Weight 2.5kg〕

LGU・LGP FGU・FGP LGPN FGPN

1-phase 25W

12

15

1/ 3

1/ 5

1/ 10

1/ 15

1/ 20

1/ 25

1/ 30

1/ 40

1/ 50

1/ 60

1/ 80

1/100

1/120

1/160

1/200

1/240

500

300

150

100

75

60

50

37.5

30

25

18.8

15

12.5

9.4

7.5

6.3

600

360

180

120

90

72

60

45

36

30

22.5

18

15

11.2

9

7.5

10

20

30

35

40

45

50

50

50

50

50

50

50

70

70

70

0.03

0.06

0.11

0.17

0.23

0.28

0.34

0.45

0.56

0.68

0.86

1.1

1.3

1.7

2.1

2.6

P.D45 Fig.D-53 2kg

P.D45 Fig.D-55 2kg

P.D43 Fig.D-57 2.5kg

P.D43 Fig.D-59 2.5kg

P.D45 Fig.D-54 2.5kg

P.D45 Fig.D-56 2.5kg

P.D43 Fig.D-58 3kg

P.D43 Fig.D-60 3kg

50Hz 60Hz50rpm (%)

1/300

1/360

5

4.2

6

5

70

70

98

196

294

343

392

441

490

490

490

490

490

490

490

686

686

686

686

686

2.7

2.7

0.29

0.59

1.08

1.67

2.25

2.74

3.33

4.41

5.49

6.66

8.43

10.8

12.7

16.7

20.6

25.5

25.5

25.5

■Frame No.12/100V ■Frame No.12/200V ■Frame No.15/100V ■Frame No.15/200V

LGU-12M-S25 LGU-12M-S25W LGP-12M-S25 LGP-12M-S25W

CAD Data: LGU-15M-S25 LGU-15M-S25W LGP-15M-S25 LGP-15M-S25W

CAD Data:

FGU-15M-S25 FGU-15M-S25W FGP-15M-S25 FGP-15M-S25W

CAD Data:

FGU-12M-S25 FGU-12M-S25W FGP-12M-S25 FGP-12M-S25W

CAD Data:

MBMBMBMB

MBMBMBMB

MBMBMBMB

MBMBMBMB

kgf・mN・mkgfN

50(100V)

60(100V) (200V)

75(100V) (200V)

45(200V)

300 2220

7

33.535

76.5

50

φ12h7

4-φ6.5 9076

13.5

4

5582.5

11

300

163.8300

4-φ6.5

5

17 65

90104

97.5

171.82522

13

8

374056

90.5

φ15h7

300

300300

2220

76.5

φ12h7

4-φ6.5

411

8 3

26

21

13.5

32 3277

4377

(φ35)

163.8300

4-φ6.5

φ15h7

90.5

2522

13

9 3

29

525

17

38 3891

9151

(φ40) 300

171.8

500 1000 1500

200

150

100

50

0

50Hz60Hz

50Hz60Hz

500 1000 1500

200

150

100

50

0

50Hz60Hz

500 1000 1500

200

150

100

50

0

50Hz60Hz

500 1000 1500

200

150

100

50

0

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

Model Code P.D34

Option P.E110~E112P.E54

Lead-Wire/Terminal Box Position Mark

G-Type〔Parallel Shaft〕 1-Phase 25W

Speed control gearmotorsSpeed control brake motors

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Standard Voltage (Continuous Rated 4 Poles)

Double Voltage (Continuous Rated 4 Poles)

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

MAX Current (A)

High speed rotation range (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

high speed Motor Capacity

Reduction Ratio

Frame No.

Output Shaft Rotation Speed (rpm)

Output Shaft Allowable TorqueOutput Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

As for motor-type:"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type Lead wire with connector 150mmMotor lead wire 300mm Lead wire for generator 300mm (white・white)

P-type

1-Phase 25W

Torque-Rotation Speed Characteristic Graph Note) 100% torque shows the allowable torque at high speed.

Rotation Speed〔rpm〕 Rotation Speed〔rpm〕 Rotation Speed〔rpm〕 Rotation Speed〔rpm〕

GTR-L Series

Torque〔

%〕

Torque〔

%〕

Torque〔

%〕

Torque〔

%〕

Page 45: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D45D44

Foot Mount Type Speed control gearmotor

Flange Mount Type Speed control gearmotor

25W

S25

S25W

50/60

50/60

100/100

200/200

0.6/0.6

0.7/0.7

0.4/0.4

0.4/0.4

750~1350/1000~1650

550~1400/650~1650

850~1350/1000~1650

600~1350/800~1650

8

8

2

2

12

15

12

15

E

LGU-12 -3~120-S25LGU-12 -3~120-S25WLGP-12 -3~120-S25LGP-12 -3~120-S25W

Fig.D-53

〔Round Weight 2kg〕

LGU-15 -160~360-S25LGU-15 -160~360-S25WLGP-15 -160~360-S25LGP-15 -160~360-S25W

Fig.D-54

〔Round Weight 2.5kg〕

FGU-12 -3~120-S25FGU-12 -3~120-S25WFGP-12 -3~120-S25FGP-12 -3~120-S25W

Fig.D-55

〔Round Weight 2kg〕

FGU-15 -160~360-S25FGU-15 -160~360-S25WFGP-15 -160~360-S25FGP-15 -160~360-S25W

Fig.D-56

〔Round Weight 2.5kg〕

LGU・LGP FGU・FGP LGPN FGPN

1-phase 25W

12

15

1/ 3

1/ 5

1/ 10

1/ 15

1/ 20

1/ 25

1/ 30

1/ 40

1/ 50

1/ 60

1/ 80

1/100

1/120

1/160

1/200

1/240

500

300

150

100

75

60

50

37.5

30

25

18.8

15

12.5

9.4

7.5

6.3

600

360

180

120

90

72

60

45

36

30

22.5

18

15

11.2

9

7.5

10

20

30

35

40

45

50

50

50

50

50

50

50

70

70

70

0.03

0.06

0.11

0.17

0.23

0.28

0.34

0.45

0.56

0.68

0.86

1.1

1.3

1.7

2.1

2.6

P.D45 Fig.D-53 2kg

P.D45 Fig.D-55 2kg

P.D43 Fig.D-57 2.5kg

P.D43 Fig.D-59 2.5kg

P.D45 Fig.D-54 2.5kg

P.D45 Fig.D-56 2.5kg

P.D43 Fig.D-58 3kg

P.D43 Fig.D-60 3kg

50Hz 60Hz50rpm (%)

1/300

1/360

5

4.2

6

5

70

70

98

196

294

343

392

441

490

490

490

490

490

490

490

686

686

686

686

686

2.7

2.7

0.29

0.59

1.08

1.67

2.25

2.74

3.33

4.41

5.49

6.66

8.43

10.8

12.7

16.7

20.6

25.5

25.5

25.5

■Frame No.12/100V ■Frame No.12/200V ■Frame No.15/100V ■Frame No.15/200V

LGU-12M-S25 LGU-12M-S25W LGP-12M-S25 LGP-12M-S25W

CAD Data: LGU-15M-S25 LGU-15M-S25W LGP-15M-S25 LGP-15M-S25W

CAD Data:

FGU-15M-S25 FGU-15M-S25W FGP-15M-S25 FGP-15M-S25W

CAD Data:

FGU-12M-S25 FGU-12M-S25W FGP-12M-S25 FGP-12M-S25W

CAD Data:

MBMBMBMB

MBMBMBMB

MBMBMBMB

MBMBMBMB

kgf・mN・mkgfN

50(100V)

60(100V) (200V)

75(100V) (200V)

45(200V)

300 2220

7

33.535

76.5

50

φ12h7

4-φ6.5 9076

13.5

4

5582.5

11

300

163.8300

4-φ6.5

5

17 65

90104

97.5

171.82522

13

8

374056

90.5

φ15h7

300

300300

2220

76.5

φ12h7

4-φ6.5

411

8 3

26

21

13.5

32 3277

4377

(φ35)

163.8300

4-φ6.5

φ15h7

90.5

2522

13

9 3

29

525

17

38 3891

9151

(φ40) 300

171.8

500 1000 1500

200

150

100

50

0

50Hz60Hz

50Hz60Hz

500 1000 1500

200

150

100

50

0

50Hz60Hz

500 1000 1500

200

150

100

50

0

50Hz60Hz

500 1000 1500

200

150

100

50

0

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

Model Code P.D34

Option P.E110~E112P.E54

Lead-Wire/Terminal Box Position Mark

G-Type〔Parallel Shaft〕 1-Phase 25W

Speed control gearmotorsSpeed control brake motors

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Standard Voltage (Continuous Rated 4 Poles)

Double Voltage (Continuous Rated 4 Poles)

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

MAX Current (A)

High speed rotation range (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

high speed Motor Capacity

Reduction Ratio

Frame No.

Output Shaft Rotation Speed (rpm)

Output Shaft Allowable TorqueOutput Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

As for motor-type:"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type Lead wire with connector 150mmMotor lead wire 300mm Lead wire for generator 300mm (white・white)

P-Type

1-Phase 25W

Torque-Rotation Speed Characteristic Graph Note) 100% torque shows the allowable torque at high speed.

Rotation Speed〔rpm〕 Rotation Speed〔rpm〕 Rotation Speed〔rpm〕 Rotation Speed〔rpm〕

GTR-L Series

Torque〔

%〕

Torque〔

%〕

Torque〔

%〕

Torque〔

%〕

Page 46: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D47D46

Foot Mount Type Speed control gearmotor with Brake

Flange Mount Type Speed control gearmotor with Brake

LGPN-12 -3~120-S25LGPN-12 -3~120-S25WFig.D-57

〔Round Weight 2.5kg〕

LGPN-15 -160~360-S25LGPN-15 -160~360-S25WFig.D-58

〔Round Weight 3kg〕

FGPN-12 -3~120-S25FGPN-12 -3~120-S25WFig.D-59

〔Round Weight 2.5kg〕

FGPN-15 -160~360-S25FGPN-15 -160~360-S25WFig.D-60

〔Round Weight 3kg〕

CAD Data: LGPN-12M-S25 LGPN-12M-S25W CAD Data: LGPN-15M-S25 LGPN-15M-S25W

CAD Data: FGPN-12M-S25 FGPN-12M-S25W CAD Data: FGPN-15M-S25 FGPN-15M-S25W

MBMB

MBMB

MBMB

MBMB

3003002220

7

33.535

76.5

50

φ12h7

4-φ6.5 9076

13.5

4

5582.5

11

300

198.3300

4-φ6.5

5

17 65

90104

97.5

206.32522

13

8

374056

90.5

φ15h7

300300

300198.3

2220

φ12h7

4-φ6.5

411

8 3

26

21

13.5

32 3277

4377

(φ35) 300

76.5

300300

4-φ6.5

φ15h7

90.5

206.32522

13

9 3

29

525

17

38 3891

9151

(φ40) 300300

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Model Code P.D34

Option P.E110~E112P.E54

Lead-Wire/Terminal Box Position Mark

G-Type〔Parallel Shaft〕 1-Phase 25W

Speed control gearmotorsSpeed control brake motors

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

As for motor-type:"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type Lead wire with connector 150mmMotor lead wire 300mm Lead wire for generator 300mm (white・white)

P-Type

GTR-L Series

Page 47: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D47D46

Foot Mount Type Speed control gearmotor with Brake

Flange Mounted Type Speed control gearmotor with Brake

LGPN-12 -3~120-S25LGPN-12 -3~120-S25WFig.D-57

〔Round Weight 2.5kg〕

LGPN-15 -160~360-S25LGPN-15 -160~360-S25WFig.D-58

〔Round Weight 3kg〕

FGPN-12 -3~120-S25FGPN-12 -3~120-S25WFig.D-59

〔Round Weight 2.5kg〕

FGPN-15 -160~360-S25FGPN-15 -160~360-S25WFig.D-60

〔Round Weight 3kg〕

CAD Data: LGPN-12M-S25 LGPN-12M-S25W CAD Data: LGPN-15M-S25 LGPN-15M-S25W

CAD Data: FGPN-12M-S25 FGPN-12M-S25W CAD Data: FGPN-15M-S25 FGPN-15M-S25W

MBMB

MBMB

MBMB

MBMB

3003002220

7

33.535

76.5

50

φ12h7

4-φ6.5 9076

13.5

4

5582.5

11

300

198.3300

4-φ6.5

5

17 65

90104

97.5

206.32522

13

8

374056

90.5

φ15h7

300300

300198.3

2220

φ12h7

4-φ6.5

411

8 3

26

21

13.5

32 3277

4377

(φ35) 300

76.5

300300

4-φ6.5

φ15h7

90.5

206.32522

13

9 3

29

525

17

38 3891

9151

(φ40) 300300

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Model Code P.D34

Option P.E110~E112P.E54

Lead-Wire/Terminal Box Position Mark

G-Type〔Parallel Shaft〕 1-Phase 25W

Speed control gearmotorsSpeed control brake motors

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

As for motor-type:"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type Lead wire with connector 150mmMotor lead wire 300mm Lead wire for generator 300mm (white・white)

P-type

GTR-L Series

Page 48: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D49D48

40W

S40

S40W

50/60

50/60

100/100

200/200

0.9/0.9

0.5/0.5

800~1350/1050~1650

900~1350/1300~1650

12

3

15

15

E

LGU-15 -3~360-S40LGU-15 -3~360-S40WLGP-15 -3~360-S40LGP-15 -3~360-S40W

Fig.D-61

〔Round Weight 3kg〕

LGU-15M-S40 LGU-15M-S40W LGP-15M-S40 LGP-15M-S40W

FGU-15 -3~360-S40FGU-15 -3~360-S40WFGP-15 -3~360-S40FGP-15 -3~360-S40W

Fig.D-62

〔Round Weight 3kg〕

LGPN-15 -3~360-S40LGPN-15 -3~360-S40WFig.D-63

〔Round Weight 3kg〕

FGPN-15 -3~360-S40FGPN-15 -3~360-S40WFig.D-64

〔Round Weight 3kg〕

LGU・LGP FGU・FGP LGPN FGPN

1-phase 40W

15

1/ 3

1/ 5

1/ 10

1/ 15

1/ 20

1/ 25

1/ 30

1/ 40

1/ 50

1/ 60

1/ 80

1/100

1/120

1/160

500

300

150

100

75

60

50

37.5

30

25

18.8

15

12.5

9.4

600

360

180

120

90

72

60

45

36

30

22.5

18

15

11.2

15

30

35

45

50

55

65

70

70

70

70

70

70

70

0.05

0.09

0.18

0.27

0.36

0.45

0.54

0.72

0.90

1.1

1.4

1.7

2.1

2.7

P.D49 Fig.D-61 3kg

P.D49 Fig.D-62 3kg

P.D49 Fig.D-63 3kg

P.D49 Fig.D-64 3kg

50Hz 60Hz50rpm (%)

1/200

1/240

1/300

1/360

7.5

6.3

5

4.2

9

7.5

6

5

70

70

70

70

147

294

343

441

490

539

637

686

686

686

686

686

686

686

686

686

686

686

2.7

2.7

2.7

2.7

0.49

0.88

1.76

2.65

3.53

4.41

5.29

7.06

8.82

10.8

13.7

16.7

20.6

26.5

26.5

26.5

26.5

26.5

■100V ■200V

CAD Data:

FGU-15M-S40 FGU-15M-S40W FGP-15M-S40 FGP-15M-S40W

CAD Data:

CAD Data: LGPN-15M-S40 LGPN-15M-S40W CAD Data: FGPN-15M-S40 FGPN-15M-S40W

MBMBMBMB

MBMBMBMB

MBMB

MBMB

kgf・mN・mkgfN

50(100V) (200V)

40(100V) (200V)

75(100V) (200V)

300

4-φ6.5

5

17 65

90104

97.5

171.82522

13

8

374056

90.5

φ15h7

300

300

4-φ6.5

φ15h7

90.5

2522

13

9 3

29

525

17

38 3891

9151

(φ40) 300

171.8

300

4-φ6.5

5

17 65

90104

97.5

206.32522

13

8

374056

90.5

φ15h7

300300

300

4-φ6.5

φ15h7

90.5

206.32522

13

9 3

29

525

17

38 3891

9151

(φ40) 300300

50Hz60Hz

500 1000 1500

200

150

100

50

0

50Hz60Hz

500 1000 1500

200

150

100

50

0

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

Model Code P.D34

Option P.E110~E112P.E54

Lead-Wire/Terminal Box Position Mark

G-Type〔Parallel Shaft〕 1-Phase 40W

Speed control gearmotorsSpeed control brake motors

Foot Mount Type Speed control gearmotor with Brake Flange Mounted Type Speed control gearmotor with Brake

Foot Mount Type Speed control gearmotor Flange Mounted Type Speed control gearmotor

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Standard Voltage (Continuous Rated 4 Poles)

Double Voltage (Continuous Rated 4 Poles)

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

MAX Current (A)

High speed rotation range (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

high speed Motor Capacity

Reduction Ratio

Frame No.

Output Shaft Rotation Speed (rpm)

Output Shaft Allowable TorqueOutput Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

As for motor-type:"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type Lead wire with connector 150mmMotor lead wire 300mm Lead wire for generator 300mm (white・white)

P-type

1-Phase 40W

Torque-Rotation Speed Characteristic Graph Note) 100% torque shows the allowable torque at high speed.

Torque〔

%〕

Torque〔

%〕

Rotation Speed〔rpm〕 Rotation Speed〔rpm〕

GTR-L Series

Page 49: Standard Model Lineup Model and Type Designation GTR-L · PDF fileGTR-L Series G Type Parallel Shaft Gearmotor Model and Type Designation Standard Model Lineup GTR-L Series Parallel

D49D48

40W

S40

S40W

50/60

50/60

100/100

200/200

0.9/0.9

0.5/0.5

800~1350/1050~1650

900~1350/1300~1650

12

3

15

15

E

LGU-15 -3~360-S40LGU-15 -3~360-S40WLGP-15 -3~360-S40LGP-15 -3~360-S40W

Fig.D-61

〔Round Weight 3kg〕

LGU-15M-S40 LGU-15M-S40W LGP-15M-S40 LGP-15M-S40W

FGU-15 -3~360-S40FGU-15 -3~360-S40WFGP-15 -3~360-S40FGP-15 -3~360-S40W

Fig.D-62

〔Round Weight 3kg〕

LGPN-15 -3~360-S40LGPN-15 -3~360-S40WFig.D-63

〔Round Weight 3kg〕

FGPN-15 -3~360-S40FGPN-15 -3~360-S40WFig.D-64

〔Round Weight 3kg〕

LGU・LGP FGU・FGP LGPN FGPN

1-phase 40W

15

1/ 3

1/ 5

1/ 10

1/ 15

1/ 20

1/ 25

1/ 30

1/ 40

1/ 50

1/ 60

1/ 80

1/100

1/120

1/160

500

300

150

100

75

60

50

37.5

30

25

18.8

15

12.5

9.4

600

360

180

120

90

72

60

45

36

30

22.5

18

15

11.2

15

30

35

45

50

55

65

70

70

70

70

70

70

70

0.05

0.09

0.18

0.27

0.36

0.45

0.54

0.72

0.90

1.1

1.4

1.7

2.1

2.7

P.D49 Fig.D-61 3kg

P.D49 Fig.D-62 3kg

P.D49 Fig.D-63 3kg

P.D49 Fig.D-64 3kg

50Hz 60Hz50rpm (%)

1/200

1/240

1/300

1/360

7.5

6.3

5

4.2

9

7.5

6

5

70

70

70

70

147

294

343

441

490

539

637

686

686

686

686

686

686

686

686

686

686

686

2.7

2.7

2.7

2.7

0.49

0.88

1.76

2.65

3.53

4.41

5.29

7.06

8.82

10.8

13.7

16.7

20.6

26.5

26.5

26.5

26.5

26.5

■100V ■200V

CAD Data:

FGU-15M-S40 FGU-15M-S40W FGP-15M-S40 FGP-15M-S40W

CAD Data:

CAD Data: LGPN-15M-S40 LGPN-15M-S40W CAD Data: FGPN-15M-S40 FGPN-15M-S40W

MBMBMBMB

MBMBMBMB

MBMB

MBMB

kgf・mN・mkgfN

50(100V) (200V)

40(100V) (200V)

75(100V) (200V)

300

4-φ6.5

5

17 65

90104

97.5

171.82522

13

8

374056

90.5

φ15h7

300

300

4-φ6.5

φ15h7

90.5

2522

13

9 3

29

525

17

38 3891

9151

(φ40) 300

171.8

300

4-φ6.5

5

17 65

90104

97.5

206.32522

13

8

374056

90.5

φ15h7

300300

300

4-φ6.5

φ15h7

90.5

206.32522

13

9 3

29

525

17

38 3891

9151

(φ40) 300300

50Hz60Hz

500 1000 1500

200

150

100

50

0

50Hz60Hz

500 1000 1500

200

150

100

50

0

Note) Since the figure in the parenthesis is the one with black scale, add more than 0.5mm to that figure for the diameter of the connecting hole. In the CAD data, the file name is common to the both type, M(Metal type) and B(Bearing type).

Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page D9.

Model Code P.D34

Option P.E110~E112P.E54

Lead-Wire/Terminal Box Position Mark

G-Type〔Parallel Shaft〕 1-Phase 40W

Speed control gearmotorsSpeed control brake motors

Foot Mount Type Speed control gearmotor with Brake Flange Mount Type Speed control gearmotor with Brake

Foot Mount Type Speed control gearmotor Flange Mount Type Speed control gearmotor

Performance Table/ Dimension

Performance Table/ Dimension

Foot Mount type Flange Mount type

Standard Voltage (Continuous Rated 4 Poles)

Double Voltage (Continuous Rated 4 Poles)

Motor Specs. CapacityMotor Capacity Designation

Frequency (Hz)

Capacitor (μF)

Voltage (V)

MAX Current (A)

High speed rotation range (rpm)

Insulation Classification

Protective system

Frame No.

Totally Enclosed

high speed Motor Capacity

Reduction Ratio

Frame No.

Output Shaft Rotation Speed (rpm)

Output Shaft Allowable TorqueOutput Shaft Allowable O.H.L

Page, Diagram No. of the Outer Dimension Diagram, Round Weight

Gearmotor Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Speed Control Gearmotor

Standard Motors

Cautions for Safety

Option

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

Water- resistant Gearmotor with Brake

Parallel Shaft Performance Table/ Dimension

Right Angle Shaft Performance Table/ Dimension

Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension

Technical Information

Gearmotor with Brake

Gearmotor with Brake

GT-Type Gearmotor with Brake

Gearmotor with Brake

Gearmotor with Clutch /Brake

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor

Speed Control Gearmotor with Brake

Standard Motors

Cautions for Safety

Option

Water- resistant Gearmotor with Brake

With Water- resistant Brake Motor

With Water- resistant Brake Motor

Parallel Shaft GTR-L Series Performance Table/ Dimension

Reversible Gearmotor with Brake

As for motor-type:"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.

U-Type Lead wire with connector 150mmMotor lead wire 300mm Lead wire for generator 300mm (white・white)

P-Type

1-Phase 40W

Torque-Rotation Speed Characteristic Graph Note) 100% torque shows the allowable torque at high speed.

Torque〔

%〕

Torque〔

%〕

Rotation Speed〔rpm〕 Rotation Speed〔rpm〕

GTR-L Series