Upload
trinhanh
View
229
Download
0
Embed Size (px)
Citation preview
The latest LED technology meets the charm of a classic strobe
INSTRUCTION MANUAL
STORMY C71090STORMY CC C71091
www.claypaky.it
STORMYSTORMY CC
PRELIMINARY
STORMYSTORMY CCThe latest LED technology meets the charm of a classic strobe
PRELIMINARY
Congratulations on choosing a Clay Paky product!We thank you for your choice. Please note that this product and all the others in the rich Clay Paky range, has been designed and manufactured with total quality to ensure excellent performance and best meet your expectations and requirements.
Carefully read this instruction manual and keep in its entirety and keep it safe for future reference. It is essential to know the information supplied in this manual in order to ensure that the fitting is installed, used and serviced correctly and safely.
CLAY PAKY S.p.A. disclaims all liability for damage to the fitting or to the other property or persons deriving from installation, use and maintenance that have not been carried out in conformity with this instructions manual, which must always accompany the fitting.
CLAY PAKY S.p.A. reserves the right to modify the characteristics stated in this instructions manual at any time and channel list without prior notice.
www.claypaky.it
PRELIMINARY
STORMYSTORMY CCThe latest LED technology meets the charm of a classic strobe
CONTENT
1. Safety Information
2. Unpacking And Preparation
3. Installation And Start-Up
4. Control Panel
5. Menu Setting
5.1 Set Up Menu
5.2 Options Menu
5.3 Information Menu
5.4 Manual Control Menu
5.5 Advanced Menu
6. Maintenance
7. Accessories
8. Technical Data
9. Channels
9.1/A Channel List Stormy
9.2/A Channel Function Stormy
9.1/B Channel List Stormy CC
9.2/B Channel Function Stormy CC
9.3 Duration Channels Details
9.4 Rete Channels Details
10. DURATION time - RATE time (PERIOD) relation
4
5
7
8
10
11
12
13
14
14
15
17
18
19
19
19
20
20
21
22
24
CONTENTS Pag.
PRELIMINARYPRELIMINARY
4
PRELIMINARY
1. SAFETY INFORMATION
SAFETY INFORMATIONSTORMY C71090STORMY CC C71091
• Installation Make sure all parts for fixing the projector are in a good state of repair. Make sure the point of anchorage is stable before positioning the projector. The safety chain must be properly hooked onto the fitting and secured to the framework, so that, if the primary support system fails, the fitting falls as little as possible. If the safety chain gets used, it needs to be replaced with a genuine spare.
• Minimum distance of illuminated objects The projector needs to be positioned so that the objects hit by the beam of light are at least 0.2 metres (8”) from the lens of the projector.
• Minimum distance from flammable materials The projector must be positioned so that any flammable materials are at least 0.20 metres (8") from every point on the surface of the fitting.
• Mounting surfacesIt is permissible to mount the fitting on normally flammable surfaces.
• Maximum ambient temperature Do not use the project if ambient temperature (ta) exceeds 40°C.
• IP20 protection rating The protection rating of the fitting is IP20. The meaning of the protection rating is:
• Protection against electrical shock Connection must be made to a power supply system fitted with efficient earthing (Class I appliance according to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the projectors from indirect contact and/or shorting to earth by using appropriately sized residual current devices.
• Connection to the power mains A qualified electrician must perform connection to the power mains. Check that the mains frequency and voltage correspond to the frequency and voltage for which the projector was designed and indicated on the electrical data label. This label also gives the input power. Refer to the latter to evaluate the maximum number of devices to be connected to the mains to avoid overloads.
• External surface temperature The maximum temperature that can be reached on the external surface of the fitting, in a thermally steady state, is 100°C (212°F).
• Maintenance Before starting any maintenance work or cleaning the projector, cut off power from the supply mains. After switching off, do not remove any parts of the fitting for at least 10 minutes. The lenses must be mounted and, if visibly damaged, they have to be replaced with genuine spares.
The products to which this manual refers comply with the following European Directives: • 2006/95/EC - Safety of electrical equipment supplied at low voltage (LVD) • 2004/108/EC - Electromagnetic Compatibility (EMC) • 2011/65/EU - Restriction of the use of certain hazardous substances (RoHS)
ta< 40 °C
tc ≤ 100 °C
IP 2 0Not protected against dripping water, rain, splashes or jets of water.
Protected against penetration by solid bodies of over 12mm (0.47”) in diameter.
5
PRELIMINARYSTORMY C71090STORMY CC C71091
2. UNPACKING AND PREPARATION
UNPACKING AND PREPARATION
Fig. 1 - Packing content
1
The latest LED technology meets the charm of a classic strobe
INSTRUCTION MANUAL
STORMY C71090
STORMY CC C71091
www.claypaky.it
STORMY
STORMY CC
PRELIMINARY
6
PRELIMINARY
3. INSTALLATION AND START-UP
INSTALLATION AND START-UP
Fig. 2 - Projector installationThe projector can be installed on the floor, on a truss, on the ceiling or wall. WARNING: the safety chain must be installed except when the projector rests on the floor. (Code 105015/801 available upon request). This must be secured to the projector support structure and then hooked to the fastening point at the centre of the fixture.
2
Continued
STORMY C71090STORMY CC C71091
1 2
3 4
5
7
PRELIMINARY
3. INSTALLATION AND START-UP
INSTALLATION AND START-UP
Fig. 3, 4 - Connecting and disconnecting the power cord
3
4
STORMY C71090STORMY CC C71091
8
PRELIMINARY
4. CONTROL PANEL
CONTROL PANEL
5
6
PowerSupply
DMX 512
DMX 5125 PIN
Fig. 5 - Connection to the power mains
Fig. 6 - Connections to the control signal line (DMX)Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ω characteristic impedance, 22-24 AWG, low capacity. Do not use microphone cable or other cable with characteristics differing from those specified. End connections must be made using XLR type 3-pin male/female connectors. A terminating plug must be inserted on the last projector with a resistance of 120 (minimum 1/4 W) between terminals 2 and 3. IMPORTANT: The wires must not make contact with each other or with the metal casing of the connectors. The casing must be connected to the shield braid and pin 1 of the connectors.
Continued
STORMY C71090STORMY CC C71091
9
PRELIMINARY
4. CONTROL PANEL
CONTROL PANEL
Menu settings status
If no button is pressed after a wait period (about 60 seconds) the display automatically returns to idle status.Any modified value that has not yet been confirmed with the E key will be cancelled.
7
Fig. 7 - Switching on the projectorThe projector immediately turns on when the power cord is plugged
Clay Paky STORMYSoftware release xxx Adress xxx
Button functions – Menu SET• If pressed in idle status: Cyclically switches between idle status and menu settings. • If pressed while setting a menu: Moves to an upper level without changing anything (exits the function)
Decreases the value displayed (with auto-repetitions), or passes to the next item on the menu. For quick access to the minimum parameter value, press the UP key while holding down the DOWN key.
Increases the value displayed (with auto-repetitions), or passes to the previous item on the menu. For quick access to the maximum parameter value, press the DOWN key while holding down the UP key.
Confirms the displayed value or activates the displayed function or opens the next menu.
SELECT
DOWN
UP
ENTER
S
E
STORMY C71090STORMY CC C71091
Display inversion
To active this function press at the same time UP and DOWN keys while the display is in standby. The condition is memorized and saved even for the subsequent switching. To return to the initial state repeat the operation again.
10
PRELIMINARY
5. MENU SETTING
STORMY C71090STORMY CC C71091
Main Menu
SET UP
OPTION
INFORMATION
MANUALCONTROL
TEST
ADVANCED
Level 1
DMX Address
Channel Mode
Fixture ID
Dimmer Curve
Minimum Ton Value
LED mode
Silent Mode
Display
Settings
System Version
Driver diagnostics
DMX Monitor
Fans Monitor
Reset
Channel
Access Code 1234
Level 2
StandardExtended
Curve 1Curve 2
RowBalanceStandardQuiet
Default preset
User preset 1
User preset 2
User preset 3
Strobe firmwareBoot firmwareDriver firmwareCPU boardCPU SN
LED Temperature
Driver Temperature
LED channelRedGreenBlueWhiteIntensityDurationRateMacroBlinder
Power Supply fan speed
RedGreenBlueWhiteIntensityDurationRateMacroBlinderRed
Firmware uploader
Model SetUp
Level 3
Reset to defaultLoad preset 1Save to preset 1Load preset 2Save to preset 2Load preset 3Save to preset 3
CurrentMaximumMinimumCurrentMaximumMinimum
Undefined modelStormyStromy CC
Choices / Values
001 - 512
001 - 255
000-255
On / OffYes / NoYes / NoYes / NoYes / NoYes / NoYes / NoYes / No
CH1 - CH4(R-G-B-W255bit / 0–100%–000255bit / 0–100%–000255bit / 0–100%–000255bit / 0–100%–000255bit / 0–100%–000255bit / 0–100%–000255bit / 0–100%–000255bit / 0–100%–000255bit / 0–100%–000
Yes / No
255bit / 0–100%–000255bit / 0–100%–000255bit / 0–100%–000255bit / 0–100%–000255bit / 0–100%–000255bit / 0–100%–000255bit / 0–100%–000255bit / 0–100%–000255bit / 0–100%–000255bit / 0–100%–000
Yes / No
11
PRELIMINARY
5.1 SET-UP MENU
SET UP - DMX ADDRESS
It allows to set DMX address to be assigned to the projector, it’s possible to select a DMX address between 1 and 512.
> NOTE: : In case of absence of DMX input signal, the displayed projector address flashes.
SET UP - CHANNEL MODE
It allows to set the operation mode of the projector selecting from the following:• Standard Max 7 DMX channels occupied for Stormy CC / max 3 DMX channels occupied for Stormy
• Extended Max 10 DMX channels occupied for Stormy CC / max 6 DMX channels occupied for Stormy.
SET UP – FIXTURE ID
It allows to set a "Fixture ID" to be assigned to the projector, for easier identifcation of the same projector in an installation. It’s possible to select a "Fixture ID" between 1 and 255.
STORMY C71090STORMY CC C71091
12
PRELIMINARY
5.2 OPTIONS MENUOPTION – DIMMER CURVE
It allows the selection of one of the following two Dimmer curves:• Curve 1• Curve 2
OPTION – MINIMUM TON VALUE
It allows the set the minimum “TON'' duration of strobe flash under which it’s not possible to come down. It’s possible to select a value between 0 and 255.
With the ''Duration'' channel you set the fash duration. At every level of the DMX signal correspondsa duration. The value ''Minimum TON value” represents the level of the DMX channel Duration under whichthe TON value does not change..OPTION – LED MODE
It allows the selection of one of the following two methods of LEDs management
• Row RGBW channels are independent .
• Balance RGBW components are optimized to have a white color with maximum light output
OPTION – SILENT MODE
It allows the selection of one of the following two alternatives:
• Standard Maximum fans’ speed; therefore maximum noise level and maximum light output of the LEDs.• Quiet It reduces the fans’ speed and, as a consequence, the noise; the maximum brightness of the LEDs. It reduces also subject to decrease according to the conditions of use (ambient temperature, used effect type).
OPTIONS - DISPLAY
The enabled DISPLAY option (ON) allows to reduce the display backlight on the machine, after a 30 seconds in standby mode. To restart is enough to press any key. Select OFF to disable this option.
OPTIONS - SETTING
It allows to save in the machine memory 3 different settings of the options menu items and its submenus:• User preset 1• User preset 2• User preset 3- Load preset 1, 2 o 3: It is used to display a previously confguration saved by the user.- Save to preset 1, 2 o 3: It is used to save the current confguration set by the user.
• Default preset It allows to reset to the default values (factory settings) on all the voices of the option menu and of therelated submenus
STORMY C71090STORMY CC C71091
13
PRELIMINARY
5.3 INFORMATION MENUINFORMATION MENU – SYSTEM VERSION
It allows to display the firmware/hardware versions of installed machine components:Strobo firmware Strobo application firmwareBoot firmware Safety softwareDriver firmware Driver application firmwareCPU board Hardware revision of CPU BoardCPU SN Serial number of CPU Board
INFORMATION MENU – DRIVER DIAGNOSTIC – LED TEMPERATURE
It allows to display some details about the functionality of the card/cards and LEDs:• Current Instantly detected operating temperature• Maximum Maximum detected temperature• Minimum Minimum detected temperature
INFORMATION MENU – DRIVER DIAGNOSTIC – DRIVER TEMPERATURE
It allows to view some details about the functionality of the driver card for LED:• Current Instantly detected operating temperature• Maximum Maximum detected temperature• Minimum Minimum detected temperature
INFORMATION MENU – DRIVER DIAGNOSTIC – LED CHANNEL
It displays the diagnostics from the driver card: for each of the 4 channels a SYSTEM information and a ERROR information is reported (the decoding is specifed in the driver’s specifcations).
INFORMATION MENU – DMX MONITOR
It allows to visualize the DMX input level (in bits or as a percentage) of each channel of the projector (value Between 0 and 255 bit or between 0 and 100%).
INFORMATION MENU – FANS MONITORIt allows to display the rotation speed (RPM Speed) of the fans installed on the machine.PwrSp = Power Supply fans.
STORMY C71090STORMY CC C71091
14
PRELIMINARY
5.4 MANUAL CONTROL MENU
5.5 ADVANCED MENU
MANUAL CONTROL – RESET
It allows to reset the projector’s CPU in case of anomalies.
MANUAL CONTROL – CHANNEL
It allows to set a value in bit to the channels, from the projector control panel for manual control of each effect without the need of a DMX input signal (values between 0 and 255 bits).
> NOTE: To access to the Advanced menu (only recommended for experienced users), you need to set the access code 1234.
ADVANCED MENU – FIRMWARE UPLOAD
It allows to transfer the firmware from one projector to the others connected to it.
ADVANCED MENU – MODEL SETUP
It allows to change the projector's model set, selecting among the available:• Undefined• Stormy• Stormy CC
STORMY C71090STORMY CC C71091
15
PRELIMINARY
6. MAINTENANCE
MAINTENANCE
1
2 Fuses 6.3 x 32 mm 12AT (p/n FUS001)
8
Fig. 8 - Fuses replacing Each product has 2 fuses associated with the main power cord connection.
Continued
STORMY C71090STORMY CC C71091
16
PRELIMINARY
6. MAINTENANCE
MAINTENANCE
9
Fig. 9 - Periodic cleaning To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subject to dust and grease deposits. The frequency with which the following operations are to be carried out depends on various factors such as wear and the work environment quality (air humidity, dust, salinity, etc.). To remove dirt from external parts, use a soft cloth dampened with any liquid glass cleaning detergent. It is recommended that the projector undergoes an annual service by a qualified technician for special maintenance involving at least the following operations: • General cleaning of internal parts. • General visual check of internal parts, cabling, mechanical parts, etc. • Electrical, photometric and functional checks; eventual repairs.
IMPORTANT: Cleaning transparent cover Only use neutral soap and water to clean the transparent cover then dry it carefully with a soft, non-abrasive cloth. (WARNING: the use of alcohol or any other detergent could damage the transparent cover.)
Parts requiring frequent cleaning.
STORMY C71090STORMY CC C71091
17
PRELIMINARY
7. ACCESSORIES
ACCESSORIES
Fig. 10 - Bandoors - C71116
STORMY C71090STORMY CC C71091
10
18
PRELIMINARY
8. TECHNICAL DATA
TECHNICAL DATASTORMY C71090STORMY CC C71091
462(18.18")
303(11.93")
152(5.98")
305(12.01")
7.2 Kg (15.13 Ibs)
Led color temperature 5700K
Cooling Forced ventilation with axial fans.
User interface - LCD display 3 lines- 4 Membrane buttons
Connection - AC power input/output: Neutrik PowerCon- DMX data in/out: 5-pin locking XLR
External power Full range 100-240V 50-60Hz, PowerCon connector
Input Power 850 VA
Body - Body extruded in black anodized aluminium
Weight 7.2 Kg (15.13 Ibs)
Protection rating IP20
Working position Work in any position
CE Marking CE MarkingComplies with the following European Directives- 2006/95/EC (LVD)- 2004/108/EC (EMC)- 2011/65/EU (RoHS)
19
PRELIMINARY
9. 1/A CHANNEL LIST _ STORMY
9.2/A CHANNEL FUNCTION _ STORMY
STORMY C71090 CHANNELS
CHANNEL CHANNEL MODE
STANDARD EXTENDED
1 INTENSITY INTENSITY2 DURATION DURATION3 RATE RATE4 - MACRO 5 - SPEED6 - OFFSET
Channel ModeStandard Extended
DMXValue
0 - 255
0 - 255
0 - 5
6 - 255
Function
INTENSITYLight output linearly increases from off to maximum brightness
DURATIONLight time (versus dark time) linearly increasesfrom shorter time (2.5msec) to longer time (650msec)See details in a following dedicated table.IMPORTANT:Duration Time must be lower than Rate Time (Period) for flashing.If Duration Time is equal or greater than Rate Time (Period) the light is continuously on.
RATELight OFF
Flashing at linearly variable frequencyfrom low: (~0.3 flashes/sec or 1 flash every period of 3.5sec)to high (25 flashes/sec or 1°flash every period of 40msec)See details in a following dedicated table.
MACRO
SPEED
OFFSET
20
PRELIMINARY
9. 1/B CHANNEL LIST _ STORMY CC
STORMY CC C71091
9.2/B CHANNEL FUNCTION _ STORMY CC
CHANNELS
123456789
1011121314
STANDARD
REDGREENBLUEWHITEINTENSITYDURATIONRATE-------
EXTENDED
REDGREENBLUEWHITEINTENSITYDURATIONRATEMACROSPEEDOFFSET----
INDEPENDENT
REDDURATIONRATEGREENDURATIONRATEBLUEDURATIONRATEWHITEDURATIONRATEINTENSITYMASK
CHANNEL MODECHANNEL
Standard
1
2
3
4
5
6
7
1
2
3
4
5
6
7
ExtendedDMXValue
Channel mode Function
RED
Red colour linearly increases from no-light to maximum intensity
GREEN
Green colour linearly increases from no-light to maximum
intensity
BLUEBlue colour linearly increases from no-light to maximum intensity
WHITE
White colour linearly increases from no-light to maximum intensity
INTENSITYLight output linearly increases from off to maximum brightness
DURATION
Light time (versus dark time) linearly increases
from shorter time (2.5msec) to longer time (650msec)
See details in a following dedicated table.
IMPORTANT:
Duration Time must be lower than Rate Time (Period) for
flashing. If Duration Time is equal or greater than Rate Time
(Period) the light is continuously on.
RATE
Light OFF
Flashing at linearly variable frequency
from low: (~0.3 flashes/sec or 1 flash every period of 3.5sec)
to high (25 flashes/sec or 1°flash every period of 40msec)
See details in a following dedicated table.
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
0 - 5
6 - 255
21
PRELIMINARY
9. 3 DURATION CHANNEL DETAILS
CHANNELSSTORMY C71090STORMY CC C71091
STORMY C71090STORMY CC C71091
0123456789
101112131415161718192021222324252627282930313233343536373839404142
129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171
43444546474849505152535455565758596061626364656667686970717273747576777879808182838485
172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214
8687888990919293949596979899
100101102103104105106107108109110111112113114115116117118119120121122123124125126127128
215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255
2.505.007.6010.1012.6015.2017.7020.3022.8025.3027.9030.4033.0035.5038.0040.6043.1045.7048.2050.7053.3055.8058.3060.9063.4066.0068.5071.0073.6076.1078.7081.2083.7086.3088.8091.4093.9096.4099.00101.5104.1106.6109.1
330.0332.6335.1337.6340.2342.7345.3347.8350.3352.9355.4358.0360.5363.0365.6368.1370.7373.2375.7378.3380.8383.3385.9388.4391.0393.5396.0398.6401.1403.7406.2408.7411.3413.8416.4418.9421.4424.0426.5429.1431.6434.1436.7
111.7114.2116.7119.3121.8124.4126.9129.4132.0134.5137.1139.6142.1144.7147.2149.8152.3154.8157.4159.9162.5165.0167.5170.1172.6175.1177.7180.2182.8185.3187.8190.4192.9195.5198.0200.5203.1205.6208.2210.7213.2215.8218.3
439.2441.7444.3446.8449.4451.9454.4457.0459.5462.1464.6467.1469.7472.2474.8477.3479.8482.4484.9487.5490.0492.5495.1497.6500.1502.7505.2507.8510.3512.8515.4517.9520.5523.0525.5528.1530.6533.2535.7538.2540.8543.3545.8
220.8223.4225.9228.5231.0233.5236.1238.6241.2243.7246.2248.8251.3253.9256.4258.9261.5264.0266.6269.1271.6274.2276.7279.2281.8284.3286.9289.4291.9294.5297.0299.6302.1304.6307.2309.7312.3314.8317.3319.9322.4325.0327.5
548.4550.9553.5556.0558.5561.1563.6566.2568.7571.2573.8576.3578.9581.4583.9586.5589.0591.6594.1596.6599.2601.7604.2606.8609.3611.9614.4616.9619.5622.0624.6627.1629.6632.2634.7637.3639.8642.3644.9647.4650.0
DMXlevel
DMXlevel
DMXlevel
DMXlevel
DMXlevel
DMXlevel
Time[msec]
Time[msec]
Time[msec]
Time[msec]
Time[msec]
Time[msec]
22
PRELIMINARY
9. 4 RATE CHANNEL DETAILS
CHANNELS
Continued
STORMY C71090STORMY CC C71091
STORMY C71090STORMY CC C71091
0123456789
101112131415161718192021222324252627282930313233343536373839404142
000000
0.290.290.430.430.570.570.710.710.860.861.001.001.141.141.321.351.391.431.561.671.721.751.791.852.002.042.082.172.272.332.382.442.502.562.602.662.78
------350035002320232017601760140014001160116010001000880.0880.0760.0740.0720.0700.0640.0600.0580.0570.0560.0540.0500.0490.0480.0460.0440.0430.0420.0410.0400.0390.0384.0376.0360.0
DMXlevel
Frequency[flash/sec]
Time[msec]
43444546474849505152535455565758596061626364656667686970717273747576777879808182838485
8687888990919293949596979899
100101102103104105106107108109110111112113114115116117118119120121122123124125126127128
2.862.983.033.133.173.233.283.333.453.523.573.643.703.793.924.004.084.174.224.274.334.414.464.554.614.674.744.814.885.005.065.135.195.265.335.415.485.565.625.685.755.815.88
5.956.026.106.176.256.336.416.496.586.626.676.716.766.806.856.906.947.047.147.257.357.467.587.697.817.877.948.008.068.138.208.268.338.408.478.558.628.708.778.858.939.019.09
350.0336.0330.0320.0315.0310.0305.0300.0290.0284.0280.0275.0270.0264.0255.0250.0245.0240.0237.0234.0231.0227.0224.0220.0217.0214.0211.0208.0205.0200.0197.5195.0192.5190.0187.5185.0182.5180.0178.0176.0174.0172.0170.0
168.0166.0164.0162.0160.0158.0156.0154.0152.0151.0150.0149.0148.0147.0146.0145.0144.0142.0140.0138.0136.0134.0132.0130.0128.0127.0126.0125.0124.0123.0122.0121.0120.0119.0118.0117.0116.0115.0114.0113.0112.0111.0110.0
DMXlevel
DMXlevel
Frequency[flash/sec]
Frequency[flash/sec]
Time[msec]
Time[msec]
23
PRELIMINARY
9. 4 RATE CHANNEL DETAILS
CHANNELS
STORMY C71090STORMYCC C71091
STORMY C71090STORMY CC C71091
129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175
9.179.099.139.179.229.269.309.359.399.439.489.529.579.629.719.809.90
10.0010.1010.2010.3110.4210.5310.6410.7510.8710.9911.1111.1711.2411.3011.3611.4311.4911.5611.6311.7011.7611.8311.9011.9812.0512.1212.2012.2712.3512.42
109.0110.0109.5109108.5108.0107.5107.0106.5106.0105.5105.0104.5104.0103.0102.0101.0100.099.098.097.096.095.094.093.092.091.090.089.589.088.588.087.587.086.586.085.585.084.584.083.583.082.582.081.581.080.5
DMXlevel
Frequency[flash/sec]
Time[msec]
176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222
223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255
12.5012.5612.6312.6912.7612.8212.8912.9513.0213.0913.1613.2313.3013.3713.4413.5113.5913.6613.7413.8113.8913.9714.0414.1214.2014.2914.3714.4514.4914.5614.6214.6814.7514.8114.8814.9515.0215.0815.1515.2215.2915.3615.4315.5015.5815.6515.72
15.8015.8715.9516.0316.1016.1816.2616.3416.4216.5016.5816.6716.9517.2417.5417.8618.1818.5218.8719.2319.6120.0020.4120.8321.2821.7422.2222.7323.2623.8124.3925.0025.00
80.079.679.278.878.478.077.677.276.876.476.075.675.274.874.474.073.673.272.872.472.071.671.270.870.470.069.669.269.068.768.468.167.867.567.266.966.666.366.065.765.465.164.864.564.263.963.6
63.363.062.762.462.161.861.561.260.960.660.360.059.058.057.056.055.054.053.052.051.050.049.048.047.046.045.044.043.042.041.040.040.0
DMXlevel
DMXlevel
Frequency[flash/sec]
Frequency[flash/sec]
Time[msec]
Time[msec]
24
PRELIMINARY
10. DURATION time - RATE time (PERIOD) relation
Duration TimeRate Time (Period) Relation
Duration time < Period : FlashingDuration time >= Period : Light continuously ON
time
Period(Rate time)
Duration
Dar
k
Ligh
t
Dar
k
Ligh
t
DutyCycle
[%]
MAX CURRENT vs DUTY CYCLE
2.0
30 100
1.5
MaxCurrent
[A]
1.0
0.5
STORMY C71090STORMY CC C71091
[A]*
IST00H/002 Rev. PRELIMINARY (07/2014)