1/4

PRODUCT DESCRIPTION

CORKJOINT Sure-Stop PVC Waterstops lead the way in high technology waterstops and comply to international standards.

Sure-Stop PVC Waterstops are extruded from special ly compounded PVC in accordance with BS2571. They are designed for use in water retaining and water excluding structures where a posit ive seal is required for poured in-situ concrete expansion, construct ion and contract ion joints.

The range of prof i les for both central ly and external ly placed appl icat ions when embedded into the concrete, form a continuous barr ier making Sure-Stop PVC Waterstops ideal for preventing water penetrat ion.

These prof i les are avai lable in rol ls with separate intersections suppl ied to simpli fy and minimise on-site fabricat ion.

Concrete structures are only as watert ight as the waterstops that join them. Sure-Stop Waterstops are designed to al low for expansion, contract ion and other movements that can cause joints to open and close.

The eff iciency of any waterstop is very dependent on good workmanship and on ful l compaction of the surrounding concrete. Optimum performance wil l be achieved i f the waterstop is instal led by keeping these factors in mind.

ADVANTAGES

A full range of profiles and sizes to suit all construction requirements

Sure-Stop PVC Waterstops conform to and exceed all major international standards

High quality compounded PVC for long durability and integrity

Factory made intersections to simplify and minimise on-site fabrication

On-site welding equipment is available upon request

Internal profiles come with factory pre-punched eyelets for easy and secure wire tying to reinforcement

Ability to withstand high hydrostatic head pressures

AREAS OF APPLICATION

Water retaining structures: Water excluding structures: Water tanks Basement areas Bund wal ls Underground car parks Sewage treatment plants Tunnels Reservoirs Retaining wal ls Dams and spi l lways Suspended slabs Water treatment plants Below ground slabs Swimming pools Roof slabs

HIGH PERFORMANCE MATERIAL SPECIFICATIONSURE-STOP® PVC WATERSTOP

TECHNICAL FEATURES

COLOUR Orange

PACKAGING 150mm - 200mm = 20m / Roll, 250mm = 15m / Roll, 320mm = 12m / Roll

ROLL WEIGHT Dependent upon profile

STORAGE CONDITIONS/SHELF LIFE 5 years from the date of production if stored properly in original, unopened and undamaged sealed packaging in dry conditions out of direct sunlight at temperatures between +10oC and +40oC

MATERIAL TYPE Polyvinyl Chloride

WELDING TEMPERATURES Approximately 180oC-200oC

PHYSICAL PROPERTIES

PROPERTY TEST METHOD RESULT

Tensile Strength (MPa) BS2782:320 >15

Elongation at Break (%) BS2782:320A >350

Water Absorbtion at 32oC (%) BS2782:430A <1% by weight

Specific Gravity (g/cm3) BS2782:620B 1.27 (+/-0.3)

Hardness, Shore A BS2782:365B 75 +/-5

NOTE: Refer to Corkjoint’s in-house Certificate of Analysis (COA) for test results pertaining to the above. Internal COA’s are conducted on every batch of raw material that is used in the production of Sure-Stop PVC waterstops. Independent laboratory test results are also available upon request.

PROFILE WIDTH SELECTION

The width of waterstop depends on the thickness of the concrete and posit ioning of the reinforcement. The thickness of the concrete should be greater than or equal to the width of the waterstop profile. Refer to CORKJOINT for further information.

SITE JOINING

CORKJOINT recommends the use of i ts special ized welding equipment for on-site welding which consists of thermostatical ly-control led welding blades and special welding j igs (each type of CORKJOINT Sure-Stop PVC Waterstop requires i ts own welding j ig to suit the part icular shape). On-site joining is a simple exercise using CORKJOINT Heat Welding Equipment comprising of an adjustable welding j ig and heating blade. The ends of the waterstop are cut square and placed into the adjustable j ig. The ends of the waterstop then sl ide up against the heating blade and bring the two ends together unti l the molten ends of the PVC fuse. When ordering welding equipment, please advise prof i le number of waterstop required.

HEALTH & SAFETY: Joining of PVC Waterstops is performed by heat welding which results in the discharge of hydrogen chloride mist and vapour. In confined spaces or in still air conditions, the use of a ventilation fan or a suitable respirator should be adopted.

WRITTEN SPECIFICATIONS

Where shown on the d rawings a l l PVC wate rs tops sha l l be Sure-S top (S ta te p ro f i l e number requ i red ) as supp l ied by CORKJOINT. Provide factory made waterstop fabricat ions for al l changes of direct ion, intersections and transit ions leav ing on l y s t ra igh t bu t t j o ined sp l i ces fo r on-s i te fabr ica t ion .

2/4

SERVICE TEMPERATURE RANGE -150 C to +700 C

3/4

FOR EXPANSION JOINTS FOR CONSTRUCTION JOINTS

FOR EXPANSION JOINTS FOR CONSTRUCTION JOINTS

150 RGX

150 CB

200 CB

250 CB

320 CB

NOTE: Fu l l d imens ion d raw ings ava i l ab le upon reques t

15.00 20.00 40.00

150.00

3.00

PUNCHED EYELET

3.00 4.00

10.00

3.00

3.00 17.00

3.00 4.00

200.00

3.00

PUNCHED EYELET

17.00

3.00

40.00 40.0020.00

3.00

250.00

3.00 3.00 3.00 4.00

18.00

PUNCHED EYELET

20.00

50.0020.00 55.00

3.50

3.00 4.00

200.00

3.00

PUNCHED EYELET

3.00

40.00 40.0020.00

3.00 4.00

20.00 40.00 50.00 50.00

320.00

4.00 4.00 5.00

4.00

PUNCHED EYELET

22.00

15.00 20.00 40.00

150.00

4.00

10.00

3.00

PUNCHED EYELET

3.00 3.00

17.00

250.00

PUNCHED EYELET

50.0020.00 55.00

3.00 3.00 3.00 4.00

3.00 4.00

20.00 40.00 50.00 50.00

320.00

4.00 4.00 5.00

PUNCHED EYELET

14.00

17.00 17.00

3.00

3.00

15.00 60.00

150.00

TEAR WEB

3.00

17.00

3.00

200.00

20.00 40.00 40.00

14.00

3.003.00TEAR WEB

17.00

3.00

250.00

15.00

4.003.00

20.00 50.00 55.00

3.00

20.00

4.00

TEAR WEB

5.005.004.00 5.00

50.00 50.0020.00 40.00

320.00

21.00

TEAR WEB

14.00

17.00

3.00

15.00 60.00

150.00

3.00

200.00

3.00 3.00 3.00

20.00 40.00 40.00 14.00

250.00

15.00

4.003.00

20.00 50.00 55.00

3.00

16.00

5.005.004.00 5.00

50.00 50.0020.00 40.00

320.00

150 CBW

200 CBW

250 CBW

320 CBW

200 RGX

250 RGX

320 RGX

150 RGW

200 RGW

250 RGW

320 RGW

15.00

16.00

15.00

18.00 15.00

20.00

20.00

21.00

15.0018.00

18.00 15.00

18.00 15.00

17.00

20.00

21.00

20.003.00

20.00

21.004.00

STANDARD PROFILE RANGE

4/4

TYPICAL APPLICATIONS

FACTORY - MADE INTERSECTIONSA w ide range o f s tandard i zed p re fab r i ca ted in te rsec t i on p ieces a re ava i l ab le a l l ow ing easy s i te we ld ing o f bu t t jo in ts to Sure-Stop PVC Waters top junct ion p ieces. Customised p ieces can be made to su i t . In such cases, drawings mus t be p rov ided g i v ing exac t d imens ions and j o in t i ng de ta i l s .

VERT ICAL “L” VERT ICAL “T” VERT ICAL “X”

FLAT “L” FLAT “T” FLAT “X”

The information and the recommendations relating to the application and end use of this product are given in good faith and are based on the information provided by the manufacturer of the product and / or the Company’s current knowledge and experience in connection with the product when properly stored, handled and applied under normal conditions and no liability of final function at the job site is assumed. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability of or fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written and / or oral recommendations, or from any other advice offered by the Company. No responsibility or liability by the Company will be accepted for misuse, misreading or derivation from the recommended guidelines in respect of this product and the user shall determine the suitability of the product for his intended use and assume all risks and liability in connection therewith. The information contained in this brochure may change at any time without notice.

Effective Date: 1 January 2014

CORKJOINT (MALAYSIA) SDN BHD 383102-H CORKJOINT (SINGAPORE) PTE LTD 200716724-KNo.51, Ja lan BRP 8/2 , Bukit Rahman Putra Industr ia l Park 10, Admira l ty Street , #03-82 North L ink Bui ld ing47000, Sunga i Buloh, Se langor Darul Ehsan, Malays ia S ingapore 757695Tel +603 6148 8010 Tel +65 6455 9331Fax +603 6148 8020 Fax +65 6455 8535

info@corkjoint .comwww.corkjo int .com

Expansion Joint Fillerboard

Joint Sealant

1st Pour 2nd Pour

‘Sure-Stop’ PVC Waterstop (Internal Expansion)

Joint Sealant

WATER RETA IN ING/EXCLUDING WATER RETAIN ING/EXCLUDING

1st Pour 2nd Pour

‘Sure-Stop’ PVC Waterstop (Internal Construction)

STANDARD DETAIL OF WALL A PL ICAT IONS

1st Pour 2nd Pour

Lean Concrete

WATER RETAIN ING/EXCLUDING

1st Pour 2nd Pour

Lean Concrete

‘Sure-Stop’ PVC Waterstop (External Construction)

WATER RETAIN ING/EXCLUDING

STANDARD DETAIL OF GROUND SLAB

EXPANSION JOINT CONSTR UCTION JOINT

Expansion Joint Fillerboard ‘Sure-Stop’ PVC Waterstop (External Expansion)

© Corkjoint 2012. All Rights Reserved.

P

A PL ICAT IONSP