INSTRUCTION MANUALWIRED/WIRELESS COLOR QUAD

OBSERVATION SYSTEM

SY2715WQ

BEFORE OPERATING THIS SYSTEM, PLEASE READ THIS MANUAL THROUGHLY AND RETAIN IT FOR

FUTURE REFERENCEThank you for purchasing the Sylvania 14” Color Wired/Wireless Observation System. Sylvania is committed to providing our customers with a high quality, reliable security product that customers have come to expect from Sylvania.

With our 14” Color Wired/Wireless product, Sylvania has gone one step further, providing you the flexibility and versatility to connect both wired and wireless cameras to your security monitor system. Your 14” Color Quad Monitor has a built-in 2.4 GHz wireless receiver, which allows you to connect up to two wireless cameras to your system on Channel 1. Your system allows you to connect 5 cameras (3 wired/ 2 wireless) to your monitor.

To learn more about this 14” Color Quad system and to learn about our complete range of accessory products, please visit our website at:

www.strategicvista.com

CAUTION

RISK OF ELECTRIC SHOCK. DO NOT OPEN.

!CAUTION! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Explanation of two Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended toalert the user to the presence of important operating and maintenance-(servicing) instructions in the literature accompanying the appliance.

THE GRAPHIC SYMBOLS WITH SUPPLEMENTAL MARKING ARE ONTHE BOTTOM OF THE SYSTEM.

“WARNING – TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSETHE UNIT TO RAIN OR MOSITURE”

!

-i-

NOTE

This equipment has been certified and found to comply with the limits regulated byFCC, EMC and LVD. Therefore, it is designed to provide reasonable protection against interference and will not cause interference with other appliance usage. However, it is imperative that user follows this manual's guidelines to avoid improperusage which may result in damage to the unit, electrical shock and fire hazard or injury.

In order to improve the feature functions and quality of this product, the specifications are subject to change without notice from time to time.

FCC CLASS B NOTICE

Note:This equipment has been tested and found to comply with the limits For a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation. This equipment generates, Uses and can radiate radio frequency energyand, if not installed and used in accordance with the instruction, may cause harmfulinterference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, (which can be determined byturning the equipment off and on), the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.• Consult the dealer or an experienced radio or television technician for help.

STRATEGIC VISTA CORP.

TOLL FREE CUSTOMER SUPPORT - 1-888-425-6739MON - FRI 8:30 AM - 5:00 PM (EASTERN STANDARD TIME)

www.strategicvista.com

-ii-

GENERAL PRECAUTIONS:15. Servicing

Do not attempt to service this product yourselfas opening or removing covers may exposeyou to voltage or other hazards. Refer all servicing to qualified service personnel

16. Damage Requiring ServiceDisconnect this product from the power supplyand refer servicing to qualified servicepersonnel under the following conditions:a. When the power supply cord or plug is

damagedb. If objects have fallen into the productc. If the product has been exposed to rain or

liquidsd. If the product does not operate normally by

following the instruction manual. Adjust onlythe controls that are covered in the instruction manual as an improper adjustment may result in damage and willoften require extensive work by a qualifiedservice technician to restore the productto its normal operation

e. If the product has been dropped or thecabinet has been damaged

f. When the product displays a distinct changein performance - this indicates a need forservice

17. Replacement PartsWhen replacement parts are required, be surethe technician uses replacement partsspecified by the manufacturer. Unauthorizedsubstitutions may result in fire, electric shock,or other hazards

18. Safety CheckUpon completion of any service to this productask the service technician to perform safetychecks to determine that the product is inproper working condition

1. Read InstructionsAll of the safety and operating instructions shouldbe read and understood before the product is used.

2. Retain InstructionsThe safety and operating instructions should be retained for future reference.

3. Heed WarningsAll warnings on the product and the instruction manual should be followed.

4. Follow InstructionsAll operating and use instructions should be followedfor optimal performance

5. CleaningDisconnect this video product from the power supplybefore cleaning

6. AttachmentsDo not use attachments not recommended by thevideo product manufacturer as they may causehazards.

7. Water and MoistureDo not use this product near water - for example,near a bathtub, wash bowl, kitchen sink, wet basement, or near a swimming pool.

8. AccessoriesUse this product only with a stand, tripod, bracket ortable recommended by the manufacturer or soldwith the product. Any mounting of the product Should follow the manufacturer’s instructions.

9. VentilationThis product should never be placed near or over a Radiator or heat register. This product should not bePlaced in a built-in installation, such as a book caseOr rack, unless proper ventilation is provided or theManufacturer’s instructions have been adhered to.

10. Power SourceThis product should be operated from the type of Power source indicated by the marking label. If youAre not sure of the type of power supply to your Location, consult your product dealer or your local Power company

11. Power Cord ProtectionPower supply cords should not be routed so that theyAre likely to be walked on or pinched by items placedOn or near them

12. LightningFor added protection, unplug this product from its outlet during a lightning storm. This will preventdamage to the video product due to lightning andpower surges

13. OverloadingTo avoid the risk of fire and electric shock, do not plugthis video product into an over-loaded power supply

14. Object and Liquid EntryNever push objects into the openings of this productas they may touch dangerous voltage points thatmay result in fire or electric shock. Never spill a liquidof any kind on this product.

-1-

CONTENTS:

1. CAUTIONS AND FEATURES ------------------------------------------------------------------ 3

2. WIRELESS CAMERA FEATURES------------------------------------------------------------ 4

3. MONITOR CONTROLS - FRONT PANEL -------------------------------------------------- 5

4. MONITOR CONTROLS - BACK PANEL ---------------------------------------------------- 9

5. SETTING MENU ---------------------------------------------------------------------------------- 10

6. STANDARD WIRED COLOR CAMERA ---------------------------------------------------- 11

7. 2.4GHz WIRELESS COLOR CAMERA ---------------------------------------------------- 12

8. INSTALLATION ---------------------------------------------------------------------------------- 13

9. TROUBLE SHOOTING ----------------------------------------------------------------------- 14

10. TECHNICAL SPECIFICATIONS ----------------------------------------------------------- 16

11. OPTIONAL ACCESSORIES ---------------------------------------------------------------- 17

12. APPENDIX - A ALARM CONNECTION -------------------------------------------------- 18

13. APPENDIX - B CONNECTING MONITOR TO VCR ---------------------------------- 19

14. APPENDIX - C CONNECTING TO SLAVE MONITOR-------------------------------- 20

15. APPENDIX - D CONNECTING TO A SYLVANIA TIME LAPSE VCR FOR ALARM REC. 21

16. APPENDIX - E CONNECTING TO A SYLVANIA TIME LAPSE VCR FOR NORMAL REC. 22

17. SYLVANIA PRODUCT WARRANTY ------------------------------------------------------- 23

18. CARE AND MAINTENANCE ----------------------------------------------------------------- 24

-2-

CAUTIONS:

1. All the warnings and instructions of this manual should be followed

2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Usewater damped cloth for cleaning

3. Do not use this unit in very humid and wet places

4. Keep enough space around the unit for ventilation. Slots and openings of the cabinet shouldnot be blocked.

5. During flashes of lightning or cracks of thunder, or when the system is not used for a long time,unplug the system power supply and disconnect the antenna and cables to protect the unitfrom lightening or power surges.

Monitor Features:

• Multi-voltage system 100 – 240Volts• On screen display including date, time and camera identification• Still Frame of each camera location in full screen or quad mode• Two times zoom in capability • Selectable audio selection in quad mode• High-resolution metal cabinet monitor with real time quad processor (30 fps)• Built-in 2.4 GHZ wireless receiver• On screen programming including date, time and camera identification• View up to five camera locations simultaneously (30 fps)• Selectable dwell time (alarm and sequential)• IR Remote Control operation• ON/OFF power switch allows monitor to be turned off while recording• Sequentially rotate through full screen display of each camera location• One camera full screen viewing• Individual camera selection of contrast and brightness controls• Two Alarm outputs to connect monitor to optional recording devices• Four Alarm inputs to add additional alarm devices• Built in speaker and microphone for two way audio communication• PIP - Picture in Picture mode allows user to see other location without interrupting the

main screen

Standard Camera Features

• 1/4” CCD Camera• Built in speaker and microphone to allow for two way audio communication• Metal mounting bracket

FEATURES:

-3-

Wireless Camera Features

• Latest 2.4GHz Wireless Technology• 1/4” CCD Color Camera• 300 ft wireless transmission (open field)• Built in speaker for one way audio communication• Metal mounting bracket

14” COLOR QUAD MONITOR

3 - 1/4” CCD COLOR CAMERASWITH METAL STAND

2 - 2.4 GHz COLOR WIRELESSCAMERAS WITH METAL BRACKET

3 - 65 Ft CABLES(FOR STANDARD CAMERA)2 POWER SUPPLIES

(FOR WIRELESS CAMERA)

-4-

MONITOR CONTROLS - FRONT PANEL:

-5-

1. Power Switch - Pressing this switch will turn power ON to the monitor. Pressing it againwill turn the power OFF. The master power switch, which controls the monitor is located atthe back of the unit.

2. Quad / Sequential Display Select Button – This button will place the unit into Quad display orsequential display mode. The amber LED light located below this button will be OFF when inQuad Mode. The amber LED light will be ON in sequential display mode. In sequential displaymode, the monitor will automatically rotate between the different cameras. (Channel 1-4)

3. Talk Button - By pressing and holding this button the user has the ability to talk to a specific camera location. This button must be pressed the entire time, while talking. To listen to the camera location release the talk button. Note: This feature is only available with the wiredcameras, which have two-way audio feature. The wireless cameras have one-way audiofeature, which allows you to listen-to camera activity.

4. Channel 1 - This button allows the user to go to full-screen display of Camera 1. When thebutton is pressed the amber LED light located below this button will be ON. Pressing the buttona second time will ‘Freeze’ this picture image. Pressing the button third time will exit from the‘Freeze’ mode.

5. Channel 2 - This button allows the user to go to full-screen display of Camera 2. When the button is pressed the amber LED light located below this button will be ON. Pressing the buttona second time will ‘Freeze’ this picture image.

-6-

6. Channel 3 - This button allows the user to go to full-screen display of Camera 3. When the button is pressed the amber LED light located below this button will be ON. Pressingthe button a second time will ‘Freeze’ this picture image.

7. Channel 4 - This button allows the user to go to full-screen display of Camera 4. Whenthe button is pressed the amber LED light located below this button will be ON. Pressingthe button a second time will ‘Freeze’ this picture image.

8. VCR Button - This button will change the display from the camera inputs to the VCR Audio/Videoplayback. The amber LED light located below this button will be ON when the VCR mode selection has been chosen.

9. Mute Button - This button will disable the audio feature from the designated camera to themonitor. The amber LED light located below this button will be ON when the Mute option isselected.

10. Mode/Alarm OFF button - This button serves three functions

a. Still Feature - In Quad Mode, pressing this button will activate the Still or Freeze feature.User’s have a choice to have more than one camera set to still mode at any one time.To freeze a camera location, press the Mode/Alarm OFF button. The blue STILL word will flash. Next, press the channel 1-4 button to freeze the camera location. A blue ‘S’wording will appear on screen to identify the camera location which has been frozen. To ‘UNSTILL’, press the MODE/ALARM OFF button.

b. Zoom Feature - This monitor is equipped with a zoom feature, providing the user the abilityto zoom in on a particular location (2 times zoom capability). To utilize this feature proceedas follows:

i. Set the monitor to the desired channel (channel 1, 2, 3 or 4). ii. Press the Mode/Alarm OFF button. A box will appear on screen, with the Zoomwording written below the box.iii.Use the up/down/left/right arrow keys (Channel 1-4 buttons) to movethe box to the area which you would like the monitor to zoom in on. Note: After 30seconds the monitor will automatically return to Quad Mode. In order to leave the Zoom feature ‘ON’, you will need to disable the CALL QUAD feature.(Refer to page 7 iii - Call Quad for details)iv. Press the Mode/Alarm Off button to Zoom in on this location. Press the buttonagain to return back to the previous mode

c. PIP Feature - This monitor will allow you to view two locations simultaneously, one beingthe main channel, the other camera being viewed in picture in picture. To utilize this feature,proceed as follows:

i. Set the monitor to the desired channel (channel 1, 2, 3 or 4). ii. Press and hold for approximately 1 ½ seconds the Mode/Alarm OFF button. The monitor will automatically switch to PIP feature.iii. Set the PIP camera, by pressing the Channel button (1-4) Note: After 30seconds the monitor will automatically return to Quad Mode. In order to leave the PIP feature ‘ON’. You will need to disable the CALL QUAD feature by turning it off.(Refer to page 7 iii - Call Quad for details)

d. If the alarm feature has been used by connecting external alarm devices (refer to Appendix A)to the monitor, the buttons will be disabled until the Alarm OFF button has been pressed. In the event of more than one alarm occurs, the monitor will automatically switch to Quad Screen mode to display the multiple alarm locations.

11. Menu/Audio - This button serves three functionsa. Audio Feature - In Quad Mode, the user can select the channel with audio. Pressing this

button automatically changes the audio from camera to camera. b. On Screen Display Feature - Press and hold for two seconds the Menu/Audio button

to access On Screen Display Feature. This feature provides you with four different options:Screen Control, General, Channel Setting, Screen Preset. Each screen is explained in detailbelow. Use UP/DOWN/LEFT/RIGHT arrow keys (channel 1 - 4) to move around and changesettings.

c. In PIP mode, to change from MAIN to SUB, press ‘AUDIO’ button.

SCREEN CONTROLContrast - Changes contrast of picture. Use theleft and right arrow keys (channel 3 and 4 buttons)to adjust contrastBrightness - Changes brightness of picture. Use the left and right arrow keys (channel 3 and 4 buttons) to adjust brightnessSharpness - Changes sharpness of picture. Use the left and right arrow keys (channel 3and 4 buttons) to adjust sharpnessColor- Changes color of picture. Use the left and right arrow keys (channel 3 and 4 buttons) to adjust color Tint - Changes tint of picture. Use the left and right arrow keys (channel 3 and 4 buttons) toadjust tint.GENERALTime - Changes the time. USA/Asia/European time optionsDate - Changes the date (24 hour clock)Time Display - Select time/date OSD (ON, OFF and VCR)If you select ON, time/date from monitor will be displayed. If you select VCR, time/date from VCR will be displayed.Title Display - Changes location of display (center, off and right options)Alarm Time – Changes the alarm durations (Off, 0-95 seconds-selectable) Note: When the alarm function is used, the monitorwill automatically switch to full screen display when motion/movement is detected. The user will be alerted to motion beingdetected by an alarm sound. At the end of the alarm time, themonitor will automatically switch back to QUAD mode provided Call Quad feature has been set.Should additional alarm triggers be received, the monitor will automatically switch to quad modeto show multiple alarm locations.Beep Time – Changes the Alarm Beep time duration. (Off, 0-95 seconds – selectable) modeCall Quad - Select Call Quad mode (30 seconds) to automatically bring the monitor to quadafter 30 seconds when PIP or Zoom features, or an alarm has triggered. Turn, the Call Quad feature OFF, when you want these features to remain on-screen -7-

TIME

CHANNEL SETTING

This screen allows you to change the title of each camera location (up to 7 characters), alarm dwell time (Off, 0-95 seconds- selectable) and Alarmfunctions (Alarm ON/OFF) individually. Use the UP/DOWN/RIGHT/LEFT arrow keys to adjust any oneof these settings

CHANNEL PRESET

This screen allows you to change the contrastand brightness of each individual camera to attainthe maximum clarity of each camera.

-8-

MONITOR CONTROLS - BACK PANEL:

1. AC Input - This button is used to connect the supplied power cord from the monitor to anelectrical outlet2. Main S/W - This button controls power to the entire unit . Depress the side with the ‘I’,to turn power ON. Depress the ‘O’ side to turn the unit OFF3. Audio /Video In - Use with A/V cables (not supplied) to receive audio and video from anexternal source (VCR)4. Audio/Video Out - Use with A/V cables (not supplied) to transmit audio and video fromthe monitor5. Monitor Audio/Video Out - Use with A/V cables (not supplied) for use with a slave monitor6. 6 Pin Din Camera Inputs - Channel 1-4 Camera inputs (for cameras with 6 pin din camerainputs)7. BNC Camera Inputs - Channel 1-4 camera inputs (for cameras with BNC Camera inputs)8. W/WL Select Button - This slide switch is used for Channel 1. Set the camera to ‘W’ whenusing a wired camera, set the slide switch to ‘WL’ when using wireless cameras9. 1,2,Scan Camera - This slide switch is used when more than one wireless camera is utilized.Set the slide switch to ‘1’, to view wireless camera #1; set the slide switch to ‘2’, to viewwireless camera #2; set the slide switch to ‘scan’ to automatically have the monitor rotatebetween the two wireless cameras10. Dwell Time - This slide switch will automatically rotate on channel 1, between the twowireless cameras based on either 3,10 or 20 second duration11. Alarm Function Terminals - These terminals are used to connect external alarm devicessuch as a motion sensor, door/alarm sensor, or time lapse VCR. Refer to Alarm Connectionin the appendices for further details. -9-

SETTING MENU:

Features of the Remote Control. For more details on specific remote control features, refer to the Monitor features

POWER

1 2 3

4 5 6

7 8 VCR

QUAD ZOOM AUDIO

PIP

MENU

STILL

SEQ

VOL CHDISPLAY

KEY FUNCTION DESCRIPTION

POWER Turns Power to monitor ON/OFF

QUAD Sets monitor to Quad Mode

VCR Sets monitor to VCR Mode

1 - 8 Allows user to select individual cameras (use buttons 1-4 for SY2715WQ)

ZOOM Sets monitor to Zoom Feature

AUDIO Sets monitor to Audio feature in Quad Mode

PIP mode, to change from MAIN to SUB, Press ‘AUDIO’

MENU Calls up the MENU Feature

PIP Sets monitor to either channel 1, 2, 3, 4 or PIP ON/OFF or FULL SCREEN. This button is also used as the UP arrow key in Menu options

STILL Sets Monitor to STILL Mode. This button is also used as the DOWN arrow key in Menu options

Use the left arrow key in ZOOM and Menu options

Use the right arrow key in PIP and Menu options

VOL + Increases the volume sound

VOL - Decreases the volume sound

CH + In PIP Mode changes channel up of SUB

CH - In PIP Mode changes channel down of SUB

SEQ Automatic channel scan of full screen in PIP Mode.

DISPLAY/ Displays ON/OFF or the full screen for current status (Title, Date, Time)

ALARM OFF Cancels the Alarm

-10-

STANDARD WIRED COLOR CAMERA:

7

1. Camera Lens - Delivers high quality image by using a 1/4” CCD Image Sensor2. Microphone – Picks up sound around the camera3. Camera Inputs - Connects cable to monitor4. PIR Sensor Input Terminals - Used to connect Optional PIR Motion Sensor5. Speaker – Delivers sound from the monitor to the camera6. External Speaker Jack - Enables user to connect external speaker to camera7. Bracket - Metal bracket connects to camera for mounting to walls, ceilings or table

INSTALLATIONA. Camera Unit

Permanent installation using metal camera bracket

IMPORTANT NOTE:Keep camera installed away from direct sunlight. Also avoid places where humidityis high or unable to protect rain. The mounting bracket must be attached to a structuraldevice such as wall stud or ceiling rafter using suitable fastener.

-11-

2.4GHz WIRELESS COLOR CAMERA:

REAR VIEWFRONT VIEW

23

4

5

7

6

8 91

1. LENS1/4" Color CCD Image sensor with built-in 92°fixed wide-angle lens.

2. MICROPHONEBuilt-in condenser microphone.(one-way audio)

3. LED-POWER INDICATORIndicates that the camera is turned on.

4. 2.4 GHz A/V ANTENNAHigh gain directional patch antennasends A/V signal to the receiver.

5. STAND MOUNTING SOCKETReinforcement lock for camera stand.

6. CHANNEL SELECTOR SWITCHSwitch for the channel 1-2 selection.

7. POWER SWITCHControls power ON/OFF. Be sure to set the switch to OFF position before plugging theAC adapter into the unit and AC outlet.

8. AUDIO/VIDEO OUT JACKSEAR Audio/Video-Out jacks for wiremode operation.

9. DC IN JACKPlug the 12V(500mA) AC Adapter in here.

-12-

INSTALLATION:

DC 12V 500 mAAC Adapter

1.Attach the stand base to the wall or ceiling where you want to install the camera. Locate a wall stud or ceiling joist and secure bracket using the three supplied screws.2.Attach the camera with the stand to the stand base and firmly tighten the joint knob on the stand base.3.Connect the supplied 12V 500mA AC adapter to the DC IN jack at the rear of the camera and plug it into 120V AC outlet.

MONITOR CONNECTIONS:1. Camera 1 InputThe 2.4GHz Wireless Cameras work on camera 1. There is no need to connect anything to camera input 12. Camera 2 InputConnect one end of the supplied 65ft cable to the first wired camera, the other end to camera Input 23. Camera 3 InputConnect one end of the supplied 65ft cable to the second wired camera, the other end to camera Input 34. Camera 4 InputConnect one end of the supplied 65ft cable to the third wired camera, the other end to camera Input 4

-13-

TROUBLE SHOOTING:

If the system does not function properly, please check the following points.

MONITOR

PROBLEM REMEDY

Multiple image in picture Readjust the VERTICAL HOLD control

Picture rolls up or down Readjust the VERTICAL HOLD control knob

Too dark or bright picture Readjust the CONTRAST or BRIGHTNESS controls

NO POWER Check for AC connection

Poor picture quality Clean the camera lens. Readjust the CONTRAST or BRIGHTNESS controls

Sound but no picture Readjust the CONTRAST or BRIGHTNESS controls

Picture but no sound Adjust the VOLUME control knob

Shrinking picture Check the condition of the POWER source

2.4GHz WIRELESS CAMERA

Problems Remedy

No power(no picture/sound)

- AC adapter not plugged in

- Power switch not turned on

- AC adapter not plugged in

- Power switch not turned on

Poor reception

Picture flickering

Picture too bright, or too dark

- Strong spot light in the field of view

- Lighting source in the field of view

- Adjust antenna directionPicture rolls and jumps or scrambled picture

-14-

TROUBLE SHOOTING: (contd.)

WIREDCAMERA

PROBLEM REMEDY

No Picture Check the cable for any lose connection

Picture Flickering orOver Exposed Make sure the camera is not facing any direct light or sunlight

-15-

TECHNICAL SPECIFICATIONS:

MONITORPicture Tube 14” Color (diagonal)Horizontal resolution 400 linesCamera Capable Up to five (4 wired or 3 wired/2 wireless)Quad Speed 30 fpsCamera Input 4 - 6 pin din /BNCAlarm Inputs/Outputs 4 / 2 Control power, quad, seq, Ch1, Ch2, Ch3 Ch4

Talk, play, still, menu, volume, audio, VCRInput signal 1 V p-p at 75 ohms terminatedPower Source Multi-voltage (AC100V – 240 V)Power Consumption 75 wattsOperating Temperature 32 ºF - 104ºF (0ºC - 25º C)Dimension : 14.17” (W) x 14.5” (D) x 13.3” (H)

(36cm (W) x 37cm (D) x 34cm (H))Weight 25 lbs (12.5 Kg)Color White – Metal cabinetSTANDARD CAMERAImage Device 1/4” CCD image sensorResolution 330 TV LinesShutter control Auto 1/60 - 1/100,000Power requirement Powered from monitor via cableOperating Temperature -14 ºF - 122 ºF (-20º C to 50ºC)Weight: 12 oz (340 Grams)Dimensions: 2 .16” (W) x 3.03”(D) x 3.34”(H)

(5.5cm (W) x 7.7cm (D) x 8.5cm(H))Housings: WhiteWIRELESS CAMERAImage Device: 1/4” CCD Image sensor

512 H x 492 V picture elementsResolution Horizontal 350 TV lines Shutter Control: Auto 1/60- 1/100,000Lens: 78º Wide AnglePower Requirement 12V DC Adapter (included)Operating Temperature -14 ºF to 122 ºF (-20º C to 50ºC)Weight: 12 oz (340 Grams)Dimensions: 2 7/8” (W) x 5 7/8”(D) x 1 7/8” (H)

(5.08cm (W) x 12.7cm (D) x 2.54cm (H))Housings: White

Because our product are subject to continuous improvement, SVC reserves the right to modify product design and specifications withoutnotice and without incurring any obligation. E&OESYLVANIA is a registered trademark of OSRAM SYLVANIA INC. used under License Agreement.

-16-

OPTIONAL ACCESSORIES:

The following accessories are available to add to your existing system.

CABLE TIME LAPSE RECORDER24 HOUR - REAL TIME

Extends viewing length fromCamera to monitor. AvailableIn 65, 100 and 250 ft lengths

Used to record key events.Records Up to 24 Hours

PIR SENSOR CAMERA DELUXE VIDEO SENDERWITH IR EXTENDER

Motion sensor detects movement.Connects to camera

ACCESSORY RECEIVER

SG6577 - 65ft cable with couplerCVA6805 - 100ft cable with couplerCVA6807 - 250ft cable with couplerSY24 - Time Lapse Recorder - 24 Hour Real TimeVS6966 - Deluxe Video Sender with IR ExtenderSG6942W - Accessory ReceiverACC2700 - Accessory PIR Motion Sensor Camera

TO ORDER THESE ACCESSORY ITEMS PLEASE CALL OUR TOLL FREE CUSTOMERSUPPORT LINE AT 1-888-425-6739 OR ORDER ONLINE AT

www.strategicvista.com

Accessory Receiver usedto view Wireless Camerafrom another location (e.g. T.V)

Allows you to view the monitor picture from another location(e.g. television). Use the IR featurefrom the Video Sender to remotelychange the monitor function

-17-

APPENDIX - AALARM CONNECTION:<THE BELOW DIAGRAM SHOWS THE ALARM TERMINALS LOCTED AT THE BACKOF THE MONITOR>

COM : CommonN.C : Normal closure alarmN.O : Normal open alarm

- Connection to external alarm should be made as shown in the above diagramNote: The maximum relay contact capacity is AC 250V/1A & AC125V/2A

<REFERENCE>

(INSIDE CIRCUIT)

▷PROCESSOR

°

°

°

NO

COM

NC°

°

°

°

°

CH1

CH2

CH3

CH4

G

1K㏀

5V

<FRONT SIDE>(5V)

-ALARM(RELAY)OUTPUT:

ON

TIMESETIN MENU(SEC)

OFF

0-ALARMINPUT:

-18-

APPENDIX - BCONNECTING MONITOR TO A STANDARD VCR:

Please see the diagram below for connecting your VCR to the Monitor.

NOTE: Ensure the Standard VCR’s channel is set to A/V Mode in order to ensure reception. Consult yourVCR’s Owners Manual to set the VCR to this setting.

* Important Note: To record the video signal only from the monitor use the Audio/Video out terminals.

To record the video out signal including on screen displayfeatures (e.g. Date, time, camera identification) use theAudio/Video Monitor out terminals.

-19-

APPENDIX - CCONNECTING TO SLAVE MONITOR:

Connections to another monitor (e.g. Slave Monitor) can be made through “MONITOR OUT” asshown in the diagram below

VIDEO-IN

-20-

APPENDIX - DCONNECTING TO A SYLVANIA TIME LAPSE VCR FOR ALARM RECORDING:

-21-

APPENDIX - ECONNECTING TO A SYLVANIA TIME LAPSE VCR FOR NORMAL RECORDING:

-22-

SYLVANIA PRODUCT WARRANTY:

SYLVANIA PRODUCT WARRANTYSYLVANIA warrants, to the original retail purchaser only (the “Purchaser”), that this item (the “Product”) is free from manufacturing defects in material and workmanship, provided the Product is used in normal conditions and is installed and used in strict accordance with the instructions contained in the Product’s Owner’s Manual.This warranty shall be for the following warranty periods (the “Warranty Period”), commencing on the date the Purchaser buys the Product at retail in an unused condition.

All Other Components: Parts and Labor - 1 Year (Warranted parts do not include Bulbs, LED’s and Batteries)Video Heads: Parts and Labor - 90 days

SYLVANIA’s obligations under this warranty shall be limited to the repair or replacement of any warranted parts found by SYLVANIA to be defective in the Product, or, in SYLVANIA’s sole discretion, the replacement of the Product found be SYLVANIA to be defective.Any replacement parts furnished be SYLVANIA in connection with this warranty shall be warranted to the Purchaser for a period equal to the unexpired portion of Warranty Period for the Product.

Warranty ExclusionsThis warranty does not apply to Bulbs, LED’s and Batteries supplied with or forming part of the product.This warranty is invalidated if other than SYLVANIA accessories are or have been used in or in connection with the Product or in any modification or repair is made to the Product be other than a service depot authorized by SYLVANIA.This warranty does not apply to defects or damages arising by use of the Product in other than normal (including normal atmospheric, moisture and humidity conditions) or by installation or use of the Product other than in strict accordance with the instructions contained in the Product’s owners Manual.This warranty does not apply to defects in or damages to the Product caused by (i) negligent use of the Product, (ii) misuse or abuse of the Product, (iii) electrical short circuits or transients, (iv) Purchaser adjustments that are not covered in the Owner’s Manual, (v) use of replacement parts not supplied by SYLVANIA (vi) improper Product maintenance, or (viii) accident, fire, flood or other Acts of God.SYLVANIA reserves the right to make change in design or to make additions to or improvements in its products without incurring any obligation to modify any product which has already been manufactured.This warranty is in lieu of other warranties, express or implied, and SYLVANIA neither assumes nor authorizes any person to assume for it any other obligation or liability in correction with the sale or service of the Product. In no event shall SYLVANIA be liable for any special or consequential damages arising from the use of the Product or arising from the malfunctioning or non-functioning of the Product, or for any delay in the performance of this warranty due to any cause beyond its control.This warranty shall not apply to the appearance or accessory items including, but not limited to cabinets, cabinets parts, knobs etc., and the uncrating, setup, installation or the removal and reinstallation of products after repair.SYLVANIA does not make any claims or warranties of any kind whatsoever regarding the Product’s potential, ability or effectiveness to prevent minimize, or in any way affect personal or property damage or injury. SYLVANIA is not responsible for any personal damage, loss or theft related to the Product or to its use for any harm, whether physical or mental related thereto. Any and all claims or statements, whether written or verbal, by salespeople, retailers, dealers or distributors to the contrary are not authorized by SYLVANIA, and do not affect this provision of this warranty.The purchaser may have other rights under state, provincial, or federal laws and where the whole or part of any item of this warranty is prohibited by such laws, it shall be deemed null and void, but the remainder of the warranty shall remain in effect.

Obtaining ServiceShould the Product require service under this warranty, the Purchaser must provide SYLVANIA with a copy of his/ her original, dated bill of sale, receipt or invoice, failing which SYLVANIA will not perform any of its obligations under this warranty. To claim on this warranty, proceed with the following steps.1 Pack the Product in a well-padded sturdy carton.2. i). If the unit was purchased in the United States proceed as follows:

Include $US 12.00 for monitors and VCR’s and $8.00 for Cameras for postage and handling (send check or money order, no cash please), along with a copy of your dated bill of sale, receipt, or invoice,plus a description of the Product’s apparent malfunction and the telephone number where you can be reached during the day. Return the unit to:Strategic Vista Corp., 203 Eggert Road, Buffalo NY 14215ii). If the unit was purchased in Canada proceed as follows:Include CDN $18.00 for monitors and VCR’s and $12.00 for Cameras for postage and handling (send cheque or money order, no cash please), along with a copy of your dated bill of sale, receipt, or invoice, plus a description of the Product’s apparent malfunction and the telephone number where you can be reached during the day. Return the unit to:Strategic Vista Corp. 300 Alden Road, Markham, Ont. L3R 4C1

www.strategicvista.com

-23-

CARE AND MAINTENANCE:

Please follow the following instructions to ensure proper care and maintenanceof this system

Keep your monitor and camera dry. If it gets wet, wipe it dry immediately.

Use and store your unit in normal temperature environment. Extremetemperatures can shorten the life of the electronic devices.

Handle the monitor carefully. Dropping it can cause serious damageto the unit.

Occasionally clean the unit with a damp cloth to keep it looking new.Do not use harsh chemicals, cleaning solvents, or strong detergentsto clean the unit.

Keep the unit away from excessive dirt and dust. It can causepremature wear of parts.

-24-