Tapper+® Xtreme

• The right choice: Windows and Door Frames

Exterior Fixtures

Hand Rails

Electrical Boxes

Hurricane Shutters

Screen Enclosures

Applications

Tapper+® Xtreme

Great for Retro-Fitting

Back out old screw No need to patch hole

Simply enlarge hole with Tapper+ Bit

Drive a new Tapper+ Xtreme

You’re Done!

Independent Code Approvals!

Tapper+® Xtreme

Code Approval

2012, 2009, 2006 and 2003 IBC & IRC ESR-3068

2010 Florida Building Code-Building & Residential

ESR-3068 FBC Supplement

Miami-Dade County Notice of Acceptance NOA12-1205.10

Tapper+® Xtreme

Beats The Competition

*Based on Manufacturer Published literature, 1-3/4” embedment

Powers 5/16" Tapper+

Xtreme

Powers 3/8" Tapper

Elco Ultracon

Hilti Quick Con II

Buildex Tapper XL

0

500

1000

1500

2000

2500

3000

Normalized Tension Load - 3,000 psi concrete

Load

(lbf

)

Tapper+® Xtreme

Superior Corrosion Resistance

When salt spray tested head to head against the ITW Tapcon® with the Climaseal coating the Powers Tapper+ PermaSeal® Coating outperformed the competition with no visible red rust.

POWERSTapconITW

• Approved for High Velocity Hurricane Zones (HVHZ)!

• Great for securing Hurricane shutters

•Superior load carrying capacity than traditional “blue screws”

• Powers’ Patented Perma-Seal® coating provides excellent corrosion resistance in extreme weather environments.

Tapper+® Xtreme

Hurricane Ready

Tapper+® XtremeProduct Demonstration

1. Using the included 5/16” Tapper+ SDS Bit, drill a hole into concrete.

2. With a #3 bit tip or 5/16” hex socket depending on head style mount the anchor into the socket

3. Drive the anchor with an impact wrench (max 115 ft-lbs.) Recommended DEWALT DCF895C2

4. After installation notice the on the head. The head diameter is the same size as the ¼” Tapper+.

Note the fast install time and minimal effort during installation due to the coarse thread.

Tapper+® Xtreme

DescriptionPowers 5/16"

Silver Tapper+ Xtreme

Buildex Tapper XL*

Hilti Quick Con II

Elco Ultracon

5/16x 1-3/4 Hex head 2200SD - 00433021 ELG4815/16x 2-1/4 Hex head 2202SD 3395902 / 3397902 00433022 ELG4865/16x 2 3/4 Hex head 2204SD 3398902 00433023 ELG4915/16x 3-1/4 Hex head 2206SD - 00433024 ELG501

5/16x 4 Hex Head 2208SD - 00433026 ELG5065/16x 5 Hexhead 2210SD - - ELG511

         5/16x 2-1/4 Flat head 2212SD - 00433049 ELG9415/16x 2 3/4 Flat head 2214SD - 00433050 ELG9485/16x 3-1/4 Flat head 2216SD - 00433051 ELG960

5/16x 4 Flat Head 2218SD - 00433054 ELG979         

5/16x 1-3/4 Trim Hex head 2230SD - - ELG4825/16x 2-1/4 Trim Hex head 2234SD - - ELG4875/16x 2 3/4 Trim Hex head 2236SD - - ELG492

         5/16x 2-1/4 Trim Flat head 2242SD - - ELG8015/16x 2 3/4 Trim Flat head 2244SD - - ELG8315/16x 3-1/4 Trim Flat head 2248SD - - ELG861

*Only available inbutton head style

Competitive Part # Cross Reference

Tapper+® Xtreme

For Ordering Information Download the Brochure here: http://www.powers.com/pdfs/catalogs/49159_tapperplus_hi.pdf

Ordering Information

*Bronze available by special order

Tapper+® Xtreme

Installation Kit

Installation Kit Includes: #3 Philips Impact Power Bit 5/16” Impact Ready Nut Driver 5/16“ x 6” SDS+ Tapper+ Bit 5/16“ x 8” SDS+ Tapper+ Bit Robust Powers case

COMING

SOON!

• Available in a choice of 4 different Head styles and a variety of colors to suit your application.

• Bonus SDS Tapper+ Bit comes with every box of Tapper+® Xtreme screw anchors!!

• Contact your local Powers representative today!

Tapper+® XtremeOrder Today!

Trim FlatTrim Hex Hex Flange Flat