TATRA PHOENIXTATRA TAKES YOU FURTHER tatratrucks.com

FIREFIGHTINGThe combination of unique properties of TATRA chassis with a modern design of firefighting superstructures provides firefighters with a unique premium technology to do their job.The “TATRA CONCEPT” together with a fording ability of 800 mm ensures serviceability both under standard conditions and in emergency situations.Excellent off-road mobility, high transport speed and driving comfort for both the crew and the carried superstructure are standard.Fire superstructures are manufactured by the THT, s.r.o. company. They are made of aluminum sections which ensure the superstructures have low weight, high strength and corrosive resistance. The arrangement and variable installation of the firefighting equipment are designed individually according to the fire brigade’s needs.The heart of THT fire superstructures is a high-quality pump, together with a foam proportioning system, roof-mounted or bumper-mounted monitor, light mast, electric generator, cable winch, and other components neces-sary for good and effective intervention.The THTronic – fire superstructure control system using CAN bus – is aimed at the most demanding of users. This system allows comfortable and safe operation, joining multiple operations into just only one. Further, it pre-vents conflicting and dangerous operations from being carried out. Also, it features central diagnostics and enables easy fault identification, which significantly extends the service life of the entire firefighting vehicle.

4×4 FIRE TRUCK CHASSIS-CAB

EXCELLENT OFF-ROAD MOBILITYQUICK OPERATION AND DRIVING COMFORTSTABILITY, RELIABILITY, SAFETY,SERVICEABILITY EVENIN EMERGENCY SITUATIONS

T 158-8P5RA3.411 4×4.2

TATRA TRUCKS a.s.Areál Tatry 1450/1, 742 21 Kopřivnice, Czech Republictel.: +420 556 493 506, fax: +420 556 494 304, e-mail: firefighting@tatra.cz

tatratrucks.com

ENGINE Type PACCAR MX13, EURO VNo. of cylinders 6Swept volume 12,900 cm3

Net power 265 kW/1,500 – 1,900 rpm Net torque 1,775 Nm/1,000 – 1,410 rpmExhaust fumes SCROption:Net power 300 kW/2,000 Nm

TRANSMISSION Type synchronized ZF 16S2230 No. of forward gears 16No. of reverse gears 2Options:- transmission equipped with intarder (16S2531)- automated AS-Tronic (16AS2630) transmission- automated transmission equipped with AS-Tronic intarder

(16AS2631) TRANSFER CASEType ZF N221/10B (DIN 100); one-speed transfer caseOption: Different gear ratio available (1.12 or 1.46), or a two-speed transfer case – 2.30 TRK, gear ratio of 0.9/1.4

PTOs Type ZF N221/10B (DIN 100)Option: Other types available on request.

FRONT AXLE Steered, driven, swinging half-axles, engageable front drive, axle differential lock, air suspension with telescopic shock absorbers.

REAR AXLES Driven, swinging half-axles, axle differential lock, air suspension with coil springs and telescopic shock absorbers, anti-roll bar.

STEERING Left-hand, single-circuit, steering gear.

BRAKESFour independent brake systems: service brake equipped with ABS and automatic load regulator, emergency brake, parking brake, engine brake.

TIRES, DISCS Tires 315/80R22.5Discs 22.5×9.00

CAB COE, long, tilt-cab, HVAC unit, independent diesel heating.No. of seats 2 to 8

TANKS Fuel tank: 220 lAdBlue tank: 45 l

DIMENSIONS Width 2,550 mmWheelbase 4,090 mmFront/rear wheel track 2,044 mm/2,044 mmGround clearance under transfer case 315 mm Ground clearance under axle 255 mm

WEIGHT Payload 11,200 kgGVW 20,000 kg

ELECTRIC EQUIPMENT Circuit voltage 24 VBattery 2×12V 180 AhAlternator 28 V/80 A

PERFORMANCEClimbing ability at 20,000 kg 100 %Top speed 100 km/h (with limiter)Curb-to-curb turning diameter 16±1.0 m

WATER TENDERThe CAS 20 – T 158 4×4.2 water tender is designed to carry a fire crew (1+ 5 up to 7) and firefighting technology to extinguish fires with water or foam using low or high pressure.

TECHNICAL DATALength (without cable winch) 7,800 mmWidth 2,550 mmHeight 3,250 mmFording ability 800 mmCurb weight 13,200 kgGVW 18,000 kgWater tank capacity 4,000 lFoam tank capacity 260 l

PUMPING EQUIPMENTLow-pressure Rated flow rate 3,000 lpm Rated pressure 1.0 MPa Rated suction lift 3 mHigh-pressure Rated flow rate 250 lpm Rated pressure 4.0 MPa

HOSE REELHose dimensions/rated flow rate DN 25/60 m / 200 lpmBranch pipe - gun-type, allowing to control flow rate and discharge cone.

OPTIONS- Electronic foam proportioning control system- THTronic control and checking system equipped with CAN

bus and color multifunction display- Monitor- Bumper-mounted monitor- Additional hose reel with DN 25/60m hose and a gun-type

branch pipe- Front nozzles for firefighting on the run- Electric recovery cable winch- Light mast- Electric generator

T 158-8P5RA3.411 4×4.24×4 FIRE TRUCK CHASSIS-CAB