Embed Size (px)
DESCRIPTION
Citation preview
the hockey goalie
the fashion robothArd_core
Lab ArCA III aa 2k10-2k11
ice-hockey rulesaccording to IIHF rule book 2010-2014
ice rink
56 ndash 61 mt
26 ndash 3
0 m
t
goal
players
each team shall not have more than six players on the ice at any time while play is in progress
puck
a) The ldquoPuckrdquo shall be made of vulcanized rubber or other material approved by the IIHF and be primarily black in colour
b) The dimensions of a puck shall not exceed
1048664 Diameter - 762 cm1048664 Thickness - 254 cm1048664 Weight -156 to 170 gms
goalkeeperrsquos requirements
protection
fluidity in movements
maximum view
to block the puck
With the exception of skates and stick all the equipment worn by the goalkeeper shall be constructed solely for the purpose of protecting the head and the body and shallnot include any garment or addition which would give the goalkeeper undue assistance in keeping goal (from IIHF rule book)
goalkeeperrsquos equipment
mask
catcher glove
blocker glove
stik
leg pads
chest protectors
skates
pants
the STICK
dimensions
materials Sticks shall be made of wood or other material approved by the IIHF
customize possibility Adhesive non-fluorescent tape of any colour may be wrapped around the stick at any place
technologies
Patented ergonomic paddleergonomic paddle geometry and the INNEGRA fiberINNEGRA fiber (POLYPROPYLENE) wrap let the stick seal closer to the body to cover holes and reduce vibrationThe concave designThe concave design also helps control rebounds and reduces weightReinforced aerospace foam coreReinforced aerospace foam core design provides increased durability while reducing weight improving balance and providing maximum vibration control
the MASK
dimensions
materials
customize possibility
All goalkeepers shall wear a hockey helmet with a facemask The goalkeepers facemask shall be constructed insuch a way that a puck shall not get through it
SHELL-Hand-laid composite carbonaramid (KEVLAR)(KEVLAR)-LEXAN EXLLEXAN EXL polycarbonate resin-Carbon fiber and fiberglass
INTERNAL PADDING- Vinyl foams
the CATCHING GLOVE
dimensions
technologiesTERMAL GEL-TECH FORMTERMAL GEL-TECH FORM
The glove had an accurately controlled convection oven at a temperature range of 63deg to 71 degC for 8 to 10 minutes This allow the glove to fit to your desired shape
Maximize comfort and control
4 back hand adjustment straps
the BLOCKING GLOVE
dimensions
The maximum outside dimensions of the protective padding attached to the back forming part of a blocking glove shall not exceed
1048664 381 cm in length 1048664 2032 cm in width
technologies
Maximize safety and handling
Removable articulating index finger and maximum side cuff keep you protected and pucks out of the net
Lightweight pro construction featuring a unique Upplift System designed to keep the blocker square to the shooter
the LEG PADS
dimensions
technologies
-The goalkeepers leg guards shall not exceed 28 cm wide when on the leg of the goalkeeper
- A piece of any material covering the space between the ice and the bottom of the leg guards in front of the skates is not permitted
customize possibility
the SKATES
technologies
28 Increased angle from standard goal cowling
Removable runnerMaximum comfort by extra
padding in the footbed a longer and thicker tongue and flexible
ankle collar
BODY ARMOR
arms amp chest
pants
ice-hockey rulesaccording to IIHF rule book 2010-2014
ice rink
56 ndash 61 mt
26 ndash 3
0 m
t
goal
players
each team shall not have more than six players on the ice at any time while play is in progress
puck
a) The ldquoPuckrdquo shall be made of vulcanized rubber or other material approved by the IIHF and be primarily black in colour
b) The dimensions of a puck shall not exceed
1048664 Diameter - 762 cm1048664 Thickness - 254 cm1048664 Weight -156 to 170 gms
goalkeeperrsquos requirements
protection
fluidity in movements
maximum view
to block the puck
With the exception of skates and stick all the equipment worn by the goalkeeper shall be constructed solely for the purpose of protecting the head and the body and shallnot include any garment or addition which would give the goalkeeper undue assistance in keeping goal (from IIHF rule book)
goalkeeperrsquos equipment
mask
catcher glove
blocker glove
stik
leg pads
chest protectors
skates
pants
the STICK
dimensions
materials Sticks shall be made of wood or other material approved by the IIHF
customize possibility Adhesive non-fluorescent tape of any colour may be wrapped around the stick at any place
technologies
Patented ergonomic paddleergonomic paddle geometry and the INNEGRA fiberINNEGRA fiber (POLYPROPYLENE) wrap let the stick seal closer to the body to cover holes and reduce vibrationThe concave designThe concave design also helps control rebounds and reduces weightReinforced aerospace foam coreReinforced aerospace foam core design provides increased durability while reducing weight improving balance and providing maximum vibration control
the MASK
dimensions
materials
customize possibility
All goalkeepers shall wear a hockey helmet with a facemask The goalkeepers facemask shall be constructed insuch a way that a puck shall not get through it
SHELL-Hand-laid composite carbonaramid (KEVLAR)(KEVLAR)-LEXAN EXLLEXAN EXL polycarbonate resin-Carbon fiber and fiberglass
INTERNAL PADDING- Vinyl foams
the CATCHING GLOVE
dimensions
technologiesTERMAL GEL-TECH FORMTERMAL GEL-TECH FORM
The glove had an accurately controlled convection oven at a temperature range of 63deg to 71 degC for 8 to 10 minutes This allow the glove to fit to your desired shape
Maximize comfort and control
4 back hand adjustment straps
the BLOCKING GLOVE
dimensions
The maximum outside dimensions of the protective padding attached to the back forming part of a blocking glove shall not exceed
1048664 381 cm in length 1048664 2032 cm in width
technologies
Maximize safety and handling
Removable articulating index finger and maximum side cuff keep you protected and pucks out of the net
Lightweight pro construction featuring a unique Upplift System designed to keep the blocker square to the shooter
the LEG PADS
dimensions
technologies
-The goalkeepers leg guards shall not exceed 28 cm wide when on the leg of the goalkeeper
- A piece of any material covering the space between the ice and the bottom of the leg guards in front of the skates is not permitted
customize possibility
the SKATES
technologies
28 Increased angle from standard goal cowling
Removable runnerMaximum comfort by extra
padding in the footbed a longer and thicker tongue and flexible
ankle collar
BODY ARMOR
arms amp chest
pants
goal
players
each team shall not have more than six players on the ice at any time while play is in progress
puck
a) The ldquoPuckrdquo shall be made of vulcanized rubber or other material approved by the IIHF and be primarily black in colour
b) The dimensions of a puck shall not exceed
1048664 Diameter - 762 cm1048664 Thickness - 254 cm1048664 Weight -156 to 170 gms
goalkeeperrsquos requirements
protection
fluidity in movements
maximum view
to block the puck
With the exception of skates and stick all the equipment worn by the goalkeeper shall be constructed solely for the purpose of protecting the head and the body and shallnot include any garment or addition which would give the goalkeeper undue assistance in keeping goal (from IIHF rule book)
goalkeeperrsquos equipment
mask
catcher glove
blocker glove
stik
leg pads
chest protectors
skates
pants
the STICK
dimensions
materials Sticks shall be made of wood or other material approved by the IIHF
customize possibility Adhesive non-fluorescent tape of any colour may be wrapped around the stick at any place
technologies
Patented ergonomic paddleergonomic paddle geometry and the INNEGRA fiberINNEGRA fiber (POLYPROPYLENE) wrap let the stick seal closer to the body to cover holes and reduce vibrationThe concave designThe concave design also helps control rebounds and reduces weightReinforced aerospace foam coreReinforced aerospace foam core design provides increased durability while reducing weight improving balance and providing maximum vibration control
the MASK
dimensions
materials
customize possibility
All goalkeepers shall wear a hockey helmet with a facemask The goalkeepers facemask shall be constructed insuch a way that a puck shall not get through it
SHELL-Hand-laid composite carbonaramid (KEVLAR)(KEVLAR)-LEXAN EXLLEXAN EXL polycarbonate resin-Carbon fiber and fiberglass
INTERNAL PADDING- Vinyl foams
the CATCHING GLOVE
dimensions
technologiesTERMAL GEL-TECH FORMTERMAL GEL-TECH FORM
The glove had an accurately controlled convection oven at a temperature range of 63deg to 71 degC for 8 to 10 minutes This allow the glove to fit to your desired shape
Maximize comfort and control
4 back hand adjustment straps
the BLOCKING GLOVE
dimensions
The maximum outside dimensions of the protective padding attached to the back forming part of a blocking glove shall not exceed
1048664 381 cm in length 1048664 2032 cm in width
technologies
Maximize safety and handling
Removable articulating index finger and maximum side cuff keep you protected and pucks out of the net
Lightweight pro construction featuring a unique Upplift System designed to keep the blocker square to the shooter
the LEG PADS
dimensions
technologies
-The goalkeepers leg guards shall not exceed 28 cm wide when on the leg of the goalkeeper
- A piece of any material covering the space between the ice and the bottom of the leg guards in front of the skates is not permitted
customize possibility
the SKATES
technologies
28 Increased angle from standard goal cowling
Removable runnerMaximum comfort by extra
padding in the footbed a longer and thicker tongue and flexible
ankle collar
BODY ARMOR
arms amp chest
pants
goalkeeperrsquos requirements
protection
fluidity in movements
maximum view
to block the puck
With the exception of skates and stick all the equipment worn by the goalkeeper shall be constructed solely for the purpose of protecting the head and the body and shallnot include any garment or addition which would give the goalkeeper undue assistance in keeping goal (from IIHF rule book)
goalkeeperrsquos equipment
mask
catcher glove
blocker glove
stik
leg pads
chest protectors
skates
pants
the STICK
dimensions
materials Sticks shall be made of wood or other material approved by the IIHF
customize possibility Adhesive non-fluorescent tape of any colour may be wrapped around the stick at any place
technologies
Patented ergonomic paddleergonomic paddle geometry and the INNEGRA fiberINNEGRA fiber (POLYPROPYLENE) wrap let the stick seal closer to the body to cover holes and reduce vibrationThe concave designThe concave design also helps control rebounds and reduces weightReinforced aerospace foam coreReinforced aerospace foam core design provides increased durability while reducing weight improving balance and providing maximum vibration control
the MASK
dimensions
materials
customize possibility
All goalkeepers shall wear a hockey helmet with a facemask The goalkeepers facemask shall be constructed insuch a way that a puck shall not get through it
SHELL-Hand-laid composite carbonaramid (KEVLAR)(KEVLAR)-LEXAN EXLLEXAN EXL polycarbonate resin-Carbon fiber and fiberglass
INTERNAL PADDING- Vinyl foams
the CATCHING GLOVE
dimensions
technologiesTERMAL GEL-TECH FORMTERMAL GEL-TECH FORM
The glove had an accurately controlled convection oven at a temperature range of 63deg to 71 degC for 8 to 10 minutes This allow the glove to fit to your desired shape
Maximize comfort and control
4 back hand adjustment straps
the BLOCKING GLOVE
dimensions
The maximum outside dimensions of the protective padding attached to the back forming part of a blocking glove shall not exceed
1048664 381 cm in length 1048664 2032 cm in width
technologies
Maximize safety and handling
Removable articulating index finger and maximum side cuff keep you protected and pucks out of the net
Lightweight pro construction featuring a unique Upplift System designed to keep the blocker square to the shooter
the LEG PADS
dimensions
technologies
-The goalkeepers leg guards shall not exceed 28 cm wide when on the leg of the goalkeeper
- A piece of any material covering the space between the ice and the bottom of the leg guards in front of the skates is not permitted
customize possibility
the SKATES
technologies
28 Increased angle from standard goal cowling
Removable runnerMaximum comfort by extra
padding in the footbed a longer and thicker tongue and flexible
ankle collar
BODY ARMOR
arms amp chest
pants
goalkeeperrsquos equipment
mask
catcher glove
blocker glove
stik
leg pads
chest protectors
skates
pants
the STICK
dimensions
materials Sticks shall be made of wood or other material approved by the IIHF
customize possibility Adhesive non-fluorescent tape of any colour may be wrapped around the stick at any place
technologies
Patented ergonomic paddleergonomic paddle geometry and the INNEGRA fiberINNEGRA fiber (POLYPROPYLENE) wrap let the stick seal closer to the body to cover holes and reduce vibrationThe concave designThe concave design also helps control rebounds and reduces weightReinforced aerospace foam coreReinforced aerospace foam core design provides increased durability while reducing weight improving balance and providing maximum vibration control
the MASK
dimensions
materials
customize possibility
All goalkeepers shall wear a hockey helmet with a facemask The goalkeepers facemask shall be constructed insuch a way that a puck shall not get through it
SHELL-Hand-laid composite carbonaramid (KEVLAR)(KEVLAR)-LEXAN EXLLEXAN EXL polycarbonate resin-Carbon fiber and fiberglass
INTERNAL PADDING- Vinyl foams
the CATCHING GLOVE
dimensions
technologiesTERMAL GEL-TECH FORMTERMAL GEL-TECH FORM
The glove had an accurately controlled convection oven at a temperature range of 63deg to 71 degC for 8 to 10 minutes This allow the glove to fit to your desired shape
Maximize comfort and control
4 back hand adjustment straps
the BLOCKING GLOVE
dimensions
The maximum outside dimensions of the protective padding attached to the back forming part of a blocking glove shall not exceed
1048664 381 cm in length 1048664 2032 cm in width
technologies
Maximize safety and handling
Removable articulating index finger and maximum side cuff keep you protected and pucks out of the net
Lightweight pro construction featuring a unique Upplift System designed to keep the blocker square to the shooter
the LEG PADS
dimensions
technologies
-The goalkeepers leg guards shall not exceed 28 cm wide when on the leg of the goalkeeper
- A piece of any material covering the space between the ice and the bottom of the leg guards in front of the skates is not permitted
customize possibility
the SKATES
technologies
28 Increased angle from standard goal cowling
Removable runnerMaximum comfort by extra
padding in the footbed a longer and thicker tongue and flexible
ankle collar
BODY ARMOR
arms amp chest
pants
the STICK
dimensions
materials Sticks shall be made of wood or other material approved by the IIHF
customize possibility Adhesive non-fluorescent tape of any colour may be wrapped around the stick at any place
technologies
Patented ergonomic paddleergonomic paddle geometry and the INNEGRA fiberINNEGRA fiber (POLYPROPYLENE) wrap let the stick seal closer to the body to cover holes and reduce vibrationThe concave designThe concave design also helps control rebounds and reduces weightReinforced aerospace foam coreReinforced aerospace foam core design provides increased durability while reducing weight improving balance and providing maximum vibration control
the MASK
dimensions
materials
customize possibility
All goalkeepers shall wear a hockey helmet with a facemask The goalkeepers facemask shall be constructed insuch a way that a puck shall not get through it
SHELL-Hand-laid composite carbonaramid (KEVLAR)(KEVLAR)-LEXAN EXLLEXAN EXL polycarbonate resin-Carbon fiber and fiberglass
INTERNAL PADDING- Vinyl foams
the CATCHING GLOVE
dimensions
technologiesTERMAL GEL-TECH FORMTERMAL GEL-TECH FORM
The glove had an accurately controlled convection oven at a temperature range of 63deg to 71 degC for 8 to 10 minutes This allow the glove to fit to your desired shape
Maximize comfort and control
4 back hand adjustment straps
the BLOCKING GLOVE
dimensions
The maximum outside dimensions of the protective padding attached to the back forming part of a blocking glove shall not exceed
1048664 381 cm in length 1048664 2032 cm in width
technologies
Maximize safety and handling
Removable articulating index finger and maximum side cuff keep you protected and pucks out of the net
Lightweight pro construction featuring a unique Upplift System designed to keep the blocker square to the shooter
the LEG PADS
dimensions
technologies
-The goalkeepers leg guards shall not exceed 28 cm wide when on the leg of the goalkeeper
- A piece of any material covering the space between the ice and the bottom of the leg guards in front of the skates is not permitted
customize possibility
the SKATES
technologies
28 Increased angle from standard goal cowling
Removable runnerMaximum comfort by extra
padding in the footbed a longer and thicker tongue and flexible
ankle collar
BODY ARMOR
arms amp chest
pants
the MASK
dimensions
materials
customize possibility
All goalkeepers shall wear a hockey helmet with a facemask The goalkeepers facemask shall be constructed insuch a way that a puck shall not get through it
SHELL-Hand-laid composite carbonaramid (KEVLAR)(KEVLAR)-LEXAN EXLLEXAN EXL polycarbonate resin-Carbon fiber and fiberglass
INTERNAL PADDING- Vinyl foams
the CATCHING GLOVE
dimensions
technologiesTERMAL GEL-TECH FORMTERMAL GEL-TECH FORM
The glove had an accurately controlled convection oven at a temperature range of 63deg to 71 degC for 8 to 10 minutes This allow the glove to fit to your desired shape
Maximize comfort and control
4 back hand adjustment straps
the BLOCKING GLOVE
dimensions
The maximum outside dimensions of the protective padding attached to the back forming part of a blocking glove shall not exceed
1048664 381 cm in length 1048664 2032 cm in width
technologies
Maximize safety and handling
Removable articulating index finger and maximum side cuff keep you protected and pucks out of the net
Lightweight pro construction featuring a unique Upplift System designed to keep the blocker square to the shooter
the LEG PADS
dimensions
technologies
-The goalkeepers leg guards shall not exceed 28 cm wide when on the leg of the goalkeeper
- A piece of any material covering the space between the ice and the bottom of the leg guards in front of the skates is not permitted
customize possibility
the SKATES
technologies
28 Increased angle from standard goal cowling
Removable runnerMaximum comfort by extra
padding in the footbed a longer and thicker tongue and flexible
ankle collar
BODY ARMOR
arms amp chest
pants
the CATCHING GLOVE
dimensions
technologiesTERMAL GEL-TECH FORMTERMAL GEL-TECH FORM
The glove had an accurately controlled convection oven at a temperature range of 63deg to 71 degC for 8 to 10 minutes This allow the glove to fit to your desired shape
Maximize comfort and control
4 back hand adjustment straps
the BLOCKING GLOVE
dimensions
The maximum outside dimensions of the protective padding attached to the back forming part of a blocking glove shall not exceed
1048664 381 cm in length 1048664 2032 cm in width
technologies
Maximize safety and handling
Removable articulating index finger and maximum side cuff keep you protected and pucks out of the net
Lightweight pro construction featuring a unique Upplift System designed to keep the blocker square to the shooter
the LEG PADS
dimensions
technologies
-The goalkeepers leg guards shall not exceed 28 cm wide when on the leg of the goalkeeper
- A piece of any material covering the space between the ice and the bottom of the leg guards in front of the skates is not permitted
customize possibility
the SKATES
technologies
28 Increased angle from standard goal cowling
Removable runnerMaximum comfort by extra
padding in the footbed a longer and thicker tongue and flexible
ankle collar
BODY ARMOR
arms amp chest
pants
the BLOCKING GLOVE
dimensions
The maximum outside dimensions of the protective padding attached to the back forming part of a blocking glove shall not exceed
1048664 381 cm in length 1048664 2032 cm in width
technologies
Maximize safety and handling
Removable articulating index finger and maximum side cuff keep you protected and pucks out of the net
Lightweight pro construction featuring a unique Upplift System designed to keep the blocker square to the shooter
the LEG PADS
dimensions
technologies
-The goalkeepers leg guards shall not exceed 28 cm wide when on the leg of the goalkeeper
- A piece of any material covering the space between the ice and the bottom of the leg guards in front of the skates is not permitted
customize possibility
the SKATES
technologies
28 Increased angle from standard goal cowling
Removable runnerMaximum comfort by extra
padding in the footbed a longer and thicker tongue and flexible
ankle collar
BODY ARMOR
arms amp chest
pants
the LEG PADS
dimensions
technologies
-The goalkeepers leg guards shall not exceed 28 cm wide when on the leg of the goalkeeper
- A piece of any material covering the space between the ice and the bottom of the leg guards in front of the skates is not permitted
customize possibility
the SKATES
technologies
28 Increased angle from standard goal cowling
Removable runnerMaximum comfort by extra
padding in the footbed a longer and thicker tongue and flexible
ankle collar
BODY ARMOR
arms amp chest
pants
the SKATES
technologies
28 Increased angle from standard goal cowling
Removable runnerMaximum comfort by extra
padding in the footbed a longer and thicker tongue and flexible
ankle collar
BODY ARMOR
arms amp chest
pants
BODY ARMOR
arms amp chest
pants
