Upload
duongkien
View
225
Download
5
Embed Size (px)
Citation preview
The QM2 PCIe Expansion Card Gives Your NAS a Performance Boost!
★ QM2-2S ★ QM2-2P ★ QM2-2S10G1T ★ QM2-2P10G1T
QTS Supports SSD Cache Acceleration • Accelerates IOPS performance and reduces latency• SSD cache can be applied to all volumes and LUNs with a single setup process; this
allows users to apply a global read-write cache on multiple volumes.
Read
Write
HDD STORAGE
SSD STORAGE
Application layer
Read Caching
Total capacity = hard drive
Read/Write Caching
QTS Supports Qtier™ 2.0 Auto-tiering• Data can be stored in different tiers, and you get a performance boost• Combining tiering on demand & I/O Aware → flexibility for accelerating performance
of key data and increase cost/performance ratioQtier 2.0
Total capacity = SSD +hard drive
HDD STORAGE
SSD STORAGE
Application layer
Total capacity = hard drive
Read /Write cachingSequential
Random
Hot data and reserved blockCold and archived data
Tiering on Demand
3.5”HDD
M.2 SSD is Much Smaller and Thinner
H 100.1 mm
W 101.6 mm
H 147mm
W 69.85 mmW 22 mm
H 110 mm2.5” SSD
H 80 mm
M.2 SSDM.2 2280 SSD (22 x 80 mm)M.2 22110 SSD (22 x 110 mm)
M.2 SSD Enhances Key System Performance
*Based on NAS HDD and consumer SSD vendor dataSource:Amazon.com (Dec, 2017)
200 MB/s
1400 MB/s
2700 MB/s
M.2 SATA III (6Gb/s) SSD
M.2 PCIe Gen 2 x4 (20Gb/s)SSD
M.2 PCIe Gen 3 x4 (32Gb/s) SSD
550 MB/s
3.5' SATA III (6Gb/s) HDD Limited by its mechanical nature; unable to reach SATA 6Gb/s performance
240GB | US $130
240GB | US $150
240GB | US $150
1TB | US $70
Read performance claimed by vendor
Differences between M.2 SATA & PCIe SSDs● M.2 SATA SSD
○ B+M Key
● M.2 PCIe SSD○ M Key
6Gb/s
20Gb/s
32Gb/s
M.2 PCIe Gen 2 x2
M.2 PCIe Gen 2 x4M.2 PCIe Gen 3 x4
10Gb/s
M.2 SATA III
16G/sM.2 PCIe Gen 3 x2
Interfaces Theoretical Speed
★ Mainstream
★ Mainstream
Models of QM2 PCIe Expansion Cards
• QM2-2S2 x M.2 22110 / 2280 SATA SSD slots
• QM2-2P2 x M.2 22110 / 2280 PCIe NVMe SSD slots
• QM2-2S10G1T2 x M.2 2280 SATA SSD slots1 x 10GBASE-T 10GbE port
• QM2-2P10G1T2 x M.2 2280 PCIe NVMe SSD slots1 x 10GBASE-T 10GbE port
Half-Height Half-Length (HHHL)PCIe expansion card
Bundled with heatsink and brackets that can be used
on all NAS models
QM2 Supports SSD Cache or Storage Space
Flexibly configure M.2 SSD as cache or storage
space
QNAP QM2 card
NVMe SSD as SSD cache only
3rd party NVMe SSD PCIe card
!
QM2-2S: 2 x M.2 SATA SSD Slots
• QM2-2S 2 x M.2 22110 / 2280 SATA SSD slotsPCIe Gen2 x2 interface
157 mm
68.9 mm
(10Gb/s)
QM2-2P: 2 x M.2 PCIe NVMe SSD Slots
• QM2-2P 2 x M.2 22110 / 2280 PCIe NVMe SSD slotsPCIe Gen2 x4 interface
(20Gb/s)
157 mm
68.9 mm (20Gb/s)
(20Gb/s)
QM2-2S10G1T:2 x M.2 SATA SSD Slot + 10GBASE-T
• QM2-2S10G1T 2 x M.2 2280 SATA SSD slots1 x 10GBASE-T 10GbE portPCIe Gen2 x4 interface
157 mm
68.9 mm
(10Gb/s)
(10Gb/s)
(20Gb/s)
QM2-2P10G1T:2 x M.2 PCIe NVMe SSD Slots + 10GBASE-T
• QM2-2P10G1T 2 x M.2 2280 PCIe NVMe SSD slots1 x 10GBASE-T 10GbE portPCIe Gen2 x4 interface
(10Gb/s)
157 mm
68.9 mm
(10Gb/s)
(20Gb/s)
(10Gb/s)
• Install a QM2 card to NAS and enable SSD cache to enhance the performance without changing existing configurations
• Install a QM2 card with 10GbE port to achieve higher performance
Add SSD Slots to NAS with a QM2 Card
HDD RAID Integrated 10G SFP+ ports
QM2 SSD RAID
TX-531X
QM2-2S
TVS-663
HDD RAID
QM2 SSD RAID
QM2-2S10G1T
10GBASE-T port
• Multiple QM2 cards on the same NAS can form a RAID5/6 M.2 SSD RAID• In QTS 4.3.4, you can freely upgrade a normal pool (configured after 4.2) to a Qtier pool
without starting over
Combine Multiple QM2 Cards to Form a M.2 SSD RAID
QM2-2SQM2-2S10G1T QM2-2P QM2-2P10G1T
QM2 SSD RAID
• The M.2 SSD slots on a QM2 card can form a RAID 5/6 volume or cache with the native SSD slots/ports on the NAS
Use a QM2 card to Expand NAS with Native SSD Slots
M.2 SATA SSD slotsQM2-2S10G1T
QM2 SSD cache
QM2-2P
TVS-673
M.2 SSD RAID
Many Models Support a PCIe Gen 2 Slot
★ Gen 2 x2 slot– TS-531X, TS-831X– TS-1635– TS-x31XU– TS-x53B– TS-x53BU
★ Gen 2 x4 slot– TS-531P– TS-563, TVS-x63– TS-x63U– TS-x70U
★ Gen 2 x8 slot– TS-x71 (1)
– TS-x70 – TS-x79
* (1) is the NAS PCIe slot number
QM2card support
Models with a High-speed PCIe Gen3 Slot
★ Gen 3 x4 slot– TS-x71U (1)
– TS-x73– TS-x80U (1)
★ Gen 3 x8 slot– TS-x71 (2), TS-x71U (2)
– TS-x77 (1)
– TS-1282 (1)
– TS-x80, TS-x80U (2)
– TS-x89U (3,4,5)
– TS-1685 (1)
★ Gen 3 x16 slot– TS-682 (1), TS-882 (1)
– TDS-16489U (2)
* (1) (2) (3) (4) is the NAS PCIe slot number
QM2card support
Live Demo: QM2 Card Installation
Install heat pad and rubber feet on M.2 SSD
Step
Install the M.2 SSD onto theQM2 card
Step 2
Install the QM2 card on a NAS
Step1 3
Performance Demo 1:Accelerate the Performance of a 10GbE NAS
• TS-531X performance test- Integrated dual 10G SFP+ ports- One PCIe Gen 2 x2 slot
• Install a QM2-2S - With two 240 GB M.2 SATA SSDs
• Enable SSD Read/Write Cache(RAID 1)
TS-531X
QM2-2S
Enable SSD Cache with QM2 Card to Enhance Random IOPS
5000
1000
0
ReadWrite
11933
8732
10000
1578
401
HDD SSD Cache HDD SSD Cache
Tested in the QNAP lab. Actual results may vary by environments.Test environment:NAS operating system: QTS 4.3Volume type: RAID 5; 4 x Seagate Enterprise HDD 1TB
Client PC:Intel® Core™ i7-6770 3.40GHz CPU; 32GB RAM; Mellanox 10GbE NIC ; Windows® 10 64-bit; 10GB file transfer by Robocopy
QM2-2S
TS-531X
SMB Random IOPS (4K, 1 x 10GbE)
Performance Demo 2: NAS with Dual PCIe Slots● TVS-471 performance test
- Dual PCIe slots● Install the QM2-2P card in the PCIe Gen 2 x4 slot
- with two 256 GB M.2 PCIe Gen 3 x4 SSD (RAID 0)● Install a LAN-10G2T-X550 on PCIe Gen 3 x8 slot● Enable Qtier 2.0 auto-tiering
TVS-471
QM2-2PLAN-10G2T-X550
LAN-10G2T-X550
Upgrade to a Qtier Pool with the QM2 Card
Client PC:Intel® Core™ i7-4770 3.40GHz CPU; 16GB RAM; Intel 10GbE NIC ; Windows® 10 64-bit; 10GB file transfer by Robocopy
Download Upload
416 407
File Transfer (10GB)2 x 10GbE
1559
1461
Qtierenabled
QM2-2P
TVS-471
Download UploadTested in the QNAP lab. Actual results may vary by environments.Test environment:NAS operating system: QTS 4.3Volume type: RAID 5; 4 x Seagate Enterprise HDD 1TB
Performance Demo 3:Maximize Performance of NAS with a Single PCIe Slot● TVS-463 performance test
- One PCIe Gen 2 x4 slot only● Install a QM2-2S10G1T card
- with two 240 GB M.2 SATA SSD (RAID 0)● Enable Qtier● 10GbE performance via QM2-2S10G1T
TVS-463
QM2-2S10G1T
Both M.2 SSD & 10GbE !!!
Upgrade Your NAS to 10GbE & SSD ready via the QM2 Card
QM2-2S10G1T
TVS-463
Download Upload
487
350
File Transfer (10GB)(1 x 10GbE)
890
608
Qtierenabled
Download UploadTested in the QNAP lab. Actual results may vary by environments.Test environment:NAS operating system: QTS 4.3Volume type: RAID 5; 4 x Seagate Enterprise HDD 1TB
Client PC:Intel® Core™ i7-4770 3.40GHz CPU; 16GB RAM; Intel 10GbE NIC ; Windows® 10 64-bit; 10GB file transfer by Robocopy
Thank you