Tool Identification• Tool Identification and Use as
Photographed and Prepared by Doug Best
1. Adjustable Wrench
1. Adjustable Wrench
• Turning various size nuts and bolts.
4. Ball Pein Hammer
2. Ball Pein Hammer
• Hammering metal.
3. Countersink• Flaring top of hole for recessing
head for flathead screw or bolt.
4. C Clamps• Clamping two or more
pieces of metal together.
5. Chalk Line Reel• Marking straight lines.
Contains chalk and string
6. Long Nose Pliers• Reaching into recessed
areas.
7. Circular Carbide Saw Blade
• Blade for use on portable circular saw.
8. Regular Socket• General-purpose socket for turning
nuts & bolts.
43. Drill Press Vise
10. Drill Press Vise
• Holding stock while drilling.
11. Hack Saw
• Sawing metal.
12. Slip Joint Pliers
•Adjust for holding various size material.
13. Nail Hammer
• Driving nails.
14. Nail Set• Countersinking nail heads
Tapered shank and cupped point
15. Masonry Bit
• Nailing in concrete, brick, or block.
16. Pin Punch
• Driving out metal pins
Straight shank and blunt tip
17. Pipe Wrench
• Turning and holding metal pipe
18.Combination Square
• Determining 45 & 90 degree angles.
115. Portable Circular Saw
19. Portable Circular Saw• Sawing wood in construction
projects
20. Combination Wrench
• Turning hex & square nuts & bolts.
137. Sledge Hammer
21. Sledge Hammer
• Heavy hammering
22. Groove Joint Pliers• Gripping when greater
pressure is needed.
23. Coping Saw
• Cutting curves & irregular cuts.
24. Tape Rule
• Straight or curved measuring
25. Try Square
• 90 degree squaring.
26. Open End Wrench
• Turning square head nuts & bolts.
27. Level
• Leveling & plumbing.
28. Portable Jig Saw
• Making irregular cuts.
29. Portable Electric Drill
• Drilling holes with an external source of electricity.
30. Straight Shank Drill Bit
• Drilling metal.
31. Speed Bore Bit
• Wood-boring bit for electric drill.