Tray TravelerReliance Fall ProtectionReliance Fall Protection

Cable tray trolleyCable tray trolleyActive engineered systemActive engineered systemLimited to Cooper B-Line Limited to Cooper B-Line

26" wide and 36" wide 6063 aluminum cable trays5” NEMA VE1 6” side rail height5” NEMA VE1 6” side rail height

Limited to 200-lb man & equipment on 20-ft Sub-spansLimited to 200-lb man & equipment on 20-ft Sub-spans

Single Jig cam brake should be applied only when transitioning (vertical locked; or offset to 10 o’clock for release) Brake pads rubber w UHMD glideto prone position or exiting prone position to standing position

Note: work-bed can be offset or centered on twin offset axles that travel on dual-rim tracking UHMD PE wheels. The floating axles are independently captured to prevent disengagement from work-bed. Four channel screw posts Four channel screw posts allow for adjusting of lateral positioning

Dual Anti-tipping gate swings into place after laying in the prone position. The swing-bars follows movement to prevent tipping. NOTE: These bars need to swung to 9 o’clock position before installing trolley wheels on Cable Tray

Two Dual Density wedge pads allow positioning for comfort & clearance of above obstructions

Foot Rest Bar to provide change of positing of body & stretch extensors muscles

Could be used for a tool tray

Pan length may need to be shortened or lengthened to accommodate upper legs & provide knee pad (pad will follow) to standWidth of tray adjustment 24” to 42” per request.

Other Action Items not addressed:D-rings for Dropped Tool tethers

Gliding foot rest moves easily to accommodate ingress and egress

Lifting Lug tool tether rings attached to frameblinding off rail lock nuts so they will not come offPossibly relooking at version 1 of foot rest.

(however it may not have durability)Finished model with have cast wheel guards &

other manufacturing refinements.