Upload
asritaip
View
242
Download
0
Embed Size (px)
Citation preview
7/28/2019 Unseen Benefit
1/12
The Unseen Benefits
of Zinc Die CastingsMichael Bess
Zin
cProtects
!
7/28/2019 Unseen Benefit
2/12
The die casting process
The die casting process is a forming process in which molten
metal is injected into the cavity of a steel die. The cavity is
precision machined with tight tolerances into a block of
heat resistant tool steel. Coupled with process control andthe uniform shrinkage characteristics of zinc alloys, this
gives the process and the resultant castings their exacting
precision. In zinc alloy die casting, the production cycle
is the fastest of the metal casting processes due to
zincs relatively low melting/solidification temperature
(379-390 C, 715-734 F). Zinc die casting is used to produce
parts from less than a gram in weight to a kilo or more.
The die casting process, which can be described as "the
fastest way from molten metal to finished part", begins with
the closing and locking of the die under high pressure.
Molten zinc alloy is then injected into the die. After a brief
period, the metal solidifies, the die opens and the casting is
ejected. The casting cycle then repeats itself. The process
can often be as fast, or faster, as the time it took to read
this sentence.
There are two types of machines used for zinc die casting
the conventional hot chamber machine with a two piece dieand the high-speed, multi-slide machine. The conventional
machine produces parts typically in excess of a two cm.
envelope. The multi-slide machine is used to produce
miniature parts. Both processes are capable of producing
a net-shape component, incorporating openings, slots and
threads.
The pressure die casting process has evolved to permit
design of products to reduce metal content, lesseningweight and cost. Zinc castings with walls less than .9mm in
thickness are commonly produced with good structural
integrity and excellent surfaces capable of being
decoratively finished.
The process technology and quality systems available in die
casting today provide designers and users of zinc die
castings with consistent quality, the ability to design
intricate configurations to net-shape and high quality
surface finish. Coupled with the recyclability of zinc alloys,
this results in products which are truly consumer and
environmentally friendly.
MoltenMetal
MoltenMetal Casting
NozzlePlunger
Inlet
Cavity
Cavity
Gooseneck
CoverDie
CoverDie
Core
Core
EjectorDieEjectorPins
OPEN
CLOSE INJECT
EJECT
EjectorDie
EjectorPins
Zinc Die Castingin a Hot Chamber Machine
1
7/28/2019 Unseen Benefit
3/12
2
Zinc is all around us in everyday life. For example,
zinc provides the protective coating that prevents
our automobiles from corroding. Zinc die castings
are everywhere too. The finished products containing
them are diverse but often hide the die castings
themselves from sight. That does not mean they
are not important to us, however. Zinc die castings
provide us with safety, security, convenience and
decoration, they improve our lives even as we go
about our daily routines at home and at work.
Zinc component designs are truly impressive in their
ability to make our lives safer and more enjoyable.
They combine the precision and cost-effectiveness
of the die casting process with the exceptional
mechanical and physical properties of zinc alloys.
We tend to see only the surface of familiar
objects: our household appliances, hand tools,
telecommunication devices, computers, transportation
vehicles. What is below the surface, providing the
functionality of these objects, is often a marvel of
engineering and design. Todays manufacturers of
both sophisticated and commonplace devices are
constantly looking at many different materials and
manufacturing processes to provide the function,
aesthetics and reasonable cost that consumers demand.
The Unseen Benefits
of Zinc Die castingsMichael Bess
Zin
cProtects
!
7/28/2019 Unseen Benefit
4/12
3
You awake on a sunny, bright morning.Although its not warm enough to turn onthe ceiling fan, you look up at its wideblades that are attached to the fan motorby zinc die cast support brackets. Thesebrackets can be decorated in an array of
colors and finishes while also providingthe structural strength to prevent theblades from becoming flying missilesduring operation.
As you walk towards the bathroom, youstop at the window to raise the blinds,letting in some welcome sunlight. Helpingyou do this is a zinc die cast cord lock,which is embedded in the blinds header.
The zinc material aids the cord to passsmoothly through while a zinc pin locksthe cord when activated. In this design thezinc die casting replaced a multi-piecesteel assembly, reducing the cost andimproving the operation. Many blindsalso incorporate a die cast zinc gearbox
to activate the tilting of the blinds.
If you step in front of the bathroom mirrorto shave, you may be using a high-tech
razor that utilizesa zinc die castbody to giveit a sleek,sculptured look. Therazors designers specifiedthe handle to be zinc die castfor its weight and feel, surface
finishing properties and manufacturingeconomies.
As you reach for the faucet to turn on thewater, you see your reflection in the highlydecorative die cast zinc spout. Tub andsink faucets have evolved from purelyfunctional to highly decorative objects.In the days when faucets were strictlyfunctional, they were machined out ofbrass bar stock. To accomplish todays
style demands, faucet shells and bodiesare made from zinc die castings.By utilizing the die casting process,engineers fashion the sleek, smoothdesigns that enable faucets to highlighta bathroom. Another property of zinc isits ability to take a highly decorativefinish. With thelatest advancesin coatings,zinc is given
a high lustercoating that willlast a lifetime.
Lets explore some of the uses andbenefits of zinc die castings across
the routine of a typical day.
The Unseen Benefits of Zinc Die Castings
INTERZINC
INTERZINC
7/28/2019 Unseen Benefit
5/12
4
After showering, you pick up the hairdryerbut do not pay attention to the fact thathidden under the plastic exterior is a smallelectric motor, which drives the blower.This motor provides multi-speed air movingcapability. Integral to this motor are twozinc die castings functioning as the motorend supports. These supports also function
as bearings against which the fan shaftturns. The unique combination of zincalloy bearing properties and the precisionavailable through the die casting processsatisfy the design and performancerequirements of an electrical homeappliance.
On the way back to the bedroom, youpause to adjust the temperature on thewall thermostat. In doing so, you areengaging a zinc die casting. Manythermostats and humidstats utilize azinc die casting for the switch mechanism.The casting is the gateway for theelectrical contact which controls theoperation of the furnace or humidifier.
Now in the kitchen to preparebreakfast, you may need towarm up a dish taken from the
refrigerator. As you turn on thestove and set the temperature,you activate a thermostat and acontrol shaft consisting of zinc diecastings. The thermostat used bymany stove manufacturers makes
use of a zinc die cast basethat replaced a multi-
component assembly,reducing cost and
improving reliability.
The control shaft is also azinc die casting which replaces
a machined steel component, againimproving cost and performance.
As you close the cabinet door after takingout a coffee cup, you may notice thecabinet hardware. The door pulls andhinges in your kitchen are probablymade from zinc die castings. Cabinetmanufacturers worldwide make use ofthe strength and excellent finishingcharacteristics of zinc alloys to provide
their hardware with the look and durabilityrequired in todays homes.
Sitting idle on the kitchen counter isa robust kitchen mixer incorporatingnumerous zinc die cast structural parts.
Zinc die castings comprise all the outercomponents of this stand mixer includingthe base, neck and motor housing.In addition to strength, the zinc diecastings neutralize the vibrations created
by the mixing action.
INTERZINC
7/28/2019 Unseen Benefit
6/12
5
Setting off for work, you close and lockthe door. Keeping everything secure arezinc die castings, which form the lockcasing and the bolt latch of the dead bolt
lock. Zinc alloysstrength, densityand decorativefinishing makes it
an ideal materialfor door lockcomponents.
With the simple act of unlocking yourcar door, sitting in the drivers seat andputting the key in the ignition to start theengine, you are relying on the precisionand durability of zinc die castings toprovide the security and dependabilityyou take for granted. The door lock
housing is a zinc die casting, whichprovides the precise dimensions thatallow a lock to perform dependably andpredictably over the vehicles lifetime.The locks are strong too, standing upto normal, and sometimes abnormal,conditions.
Before venturing onto the street, youbuckle your seatbelt. This simple safety actbrings to bear the design and performance
of zinc die castings. In the seatbeltretractor system there is typically a systemof gears, counterweights and pawls to lockthe seatbelt in place in one direction while
allowing simpleadjustment in lengthin the other direction.The pawls, inertia disks,retractor gears andpulleys in this assemblyare high-strength zinc diecastings that provide the
unique combination ofmechanical and physicalproperties (strength,ductility and weight) toinsure that this systemperforms as designed. Zinc provides theability to create the complex design andgeometry required for the seat belt systemto function. The consistency of the diecasting process yields part-to-partdimensional uniformity down to less than
a tenth of a millimeter. In the event thatthis restraint system hasto work, such as asudden stop or collision,a device called the seatbelt pretensioner uses apyrotechnic charge totake up slack and lockthe seatbelt in theearliest stages of animpact. The pretensioner
housing is also a zincdie casting. Although not seen universally,such safety devices are being deployedin more and more vehicles throughoutthe world.
Perhaps you wish to adjust your powerseat. What used to be a luxury has nowalmost become a standard feature. Powerseats are available in many makes andmodels of automobile. They are easy to
take for granted but they constitute anintricate system of motors and flexibledrives. Housing this system is a precisionzinc die casting. Typically there are three
The Unseen Benefits of Zinc Die Castings
INTERZINC
DYNACASTInc.
7/28/2019 Unseen Benefit
7/12
6
motor drives, up and down, back andforth, and tilt. The one-piece housingcontains the motors and incorporates
an outer gear housing for each,and the attachment for thethree flexible drives.
You check the traffic in your side viewmirror. Once almost exclusively producedas zinc die castings, the exterior mirror
shells today are produced from a varietyof materials. Prestige and luxury vehicleswhose mirror shells are finished in brightchromium still depend upon the excellentsurface finish of zinc die castings toprovide the substrate for the electroplatedfinish. The strength of the shell andinternal complexity also provides theability to fix the internal components ofthe mirror. No matter what the shell maybe made from, the internal workings of
the mirror, whether manually or electricallyadjustable, depend on zinc die castings tosupport the adjustment mechanism.Pushing an electrical switch or moving alever inside the vehicle sets in motion acomplex mechanism containing zinc diecastings to move the mirror.
As you proceed to work, you spot anemergency vehicle ahead. Emergencyand municipal vehicles flash their rooftop
warning lights by rotating a parabolicreflector at high speed around ahigh-intensity bulb. Supporting thebulb, reflector and rotator gear on many
emergency vehicles is a one-piece zincdie cast rotator base. The design of therotator base incorporates specific geometryand proportion. It requires precision andbalance to prevent problems in the gearmeshing geometry. Zinc die castingprovides the precision and balance sowhen an emergency vehicle needs to
respond, yousee thewarning.
With traffic delays, you use a cell phoneto let co-workers know you will be late.This phone happens to be a modelthat contains a thin zinc die cast framesupporting the enclosed electronics. The
zinc frame not only provides rigidity andstrength, but zinc protects the electronicsin another way as well.
INTERZINC
INTERZINC
7/28/2019 Unseen Benefit
8/12
7
Electronics can emit and must beshielded from electromagnetic interference(EMI). Zinc is a natural barrier to thisinterference, enhancing the performanceof the phone.
Imagine that you need to have the oilchanged in your cars engine. The hood
of the car is opened, the oil cap removedand an electronic oil-metering assembly isinserted. The main component of themetering assembly is a 25 cm-long zincdie cast housing. The housing functionsas a conduit for the oil, and integrates ashut-off valve and metering gears.When the correct amount of oilis pumped into theengine the metershuts off and
the attendantreadies yourcar fordeparture.
Do you play golf? Maybe you own a newpair of golf shoes that are outfitted withthe latest cleat system. This systemfeatures interlocking tri-lobes. One half ofthe system is a plastic cleat and the otherhalf is a die cast zinc receptacle. This quick
change system allows you to quicklychange cleatsdepending on thecourse conditions.The zinc alloyprovides thecleat system withsuperior corrosionresistance andstrength.
During the day, you may well walk over toa vending machine to get a cold drink.The note changer that is now a part ofthe vending machine incorporates a
number of zinc die castings, one that canbe seen, and several behind the scenes.The casting that you can see is the notechanger face plate, which is typicallyfinished in a black epoxy coating.
The other zinc diecastings in thischanger are the
top and bottomsensor plates.
The casting process has eliminatedmultiple part assembly, improved qualityof fit, provides improved guidance of thenotes, and forms a tight seal keeping dirtand dust out of the mechanism.
Arriving home, you receive a packagefrom a parcel delivery service. The deliveryperson scans the bar code on the package
for tracking purposes.The portable bar codescanner used is a marvelof mechanical andelectrical design. In thescanning mechanism small,precisely positioned mirrorsdirect light to similarlyprecisely positioned sensors.Zinc die castings providethe physical attachment
points and supports forthese critical elements ofthe design. The part-to-partconsistency and long term
The Unseen Benefits of Zinc Die Castings
INT
ERZINC
INTERZINC
INTERZINC
SYMBOLTECHNO
LOGIES
7/28/2019 Unseen Benefit
9/12
8
dimensional stability of zinc die castingshelps contribute to the dependability builtinto this scanner.
Setting the package down, you noticethat the lights in the living room are notworking, the breaker in the power box must
have been tripped. Here too, zinc diecastings are hard at work for you. Withoutdie cast conduit connectors, cable clamps,elbows and other electrical fittings, yourelectrical wiring system would be thatmuch more difficult and expensive forthe initial installation and subsequentmaintenance. Approved by governingboards around the world such as UL andCSA1, zinc die cast electrical fittings helpcreate the infrastructure that you andyour neighbors depend on. Openingthe electrical distribution panel thatsafeguards your home, you can find morezinc die castings in the form of groundclamps and internal components of thecircuit breakers.
In the utility room, you may well havesome power tools. Tool manufacturerstake advantage of zinc alloys strengthto make low cost power tools available
for home use. For example, the die castzinc gear case of a battery-powered driverprovides the outer gear race and houses
the drive gear assembly.Zinc alloy has thetoughness needed bythe gear teeth and thebearing properties forsmooth operation, as wellas offering good aesthetics.
Another likely tool on the workbench is ahand stapler. New stapler designs utilizezinc castings for the stapler body.
Two zinc cast body halves replace multipleparts and eliminate secondary machiningand additional assembly. Zinc alloy alsoprovides a damping effect, reducing theshock of the spring recoil after the stapleis shot.
Another tool on the table may be a
retractable rule. The steel rule is housedin a chrome plated zinc die cast case. Thereflective housing is attractive while alsohaving the internal complexity, strengthand precision to permit the tool to performfor many years to come.
Back in the family room, the homeentertainment console contains anabundance of zinc die castings. Theamplifier and receiver contain zinc diecast electronic chassis components, heatsinks and wire wrap terminals. These zincalloy components provide the precision,strength, and thermal properties thatinsure proper functioning of printedcircuit boards and semiconductor devices.
More visible, but usually not recognized,are die castings located on the rear panelsof your electronics such as the chassis
connectors for antenna cables (commonlycalled type "F" connectors.) The shells ofthese externally threaded connectors areproduced to net shape by the die casting
1UL: Underwriters Laboratory
CSA: Canadian Standards Association
INTERZINC
INTERZINC
7/28/2019 Unseen Benefit
10/12
Zinc and thehumble zipper
One of the most widespread applicationsof zinc die casting is around us on aneveryday basis. Whether you are getting
dressed, packing luggage for a journey,putting books and other items into abackpack, or getting your laptop outof its carrying case, you are very likelyusing a zipper. Yes, zippers are asignificant benefactor of the capabilitiesof zinc die casting. The zipper slider andpull are commonly produced from zincdie casting, and even the teeth are oftenzinc die castings. Precise dimensionsinsure easy operation and gripping
power. The strength and stability of zincalloy provide long life. From miniatureapplications in delicate garmentsthrough heavy-dutyusage in commercialclosures, zinc diecastings are holdingthings together for us.
Sustainability
Zinc is natural, recyclable and inherentlypart of our environment. It is the 17thmost common element in the earths
crust and an essential element for man,animals and plants. Specifying zincfor die casting is an environmentallyresponsible choice, in line with todaysneed for sustainable materials. Zincdie cast parts are durable and fullyrecyclable. At the end of their productlife, zinc die castings can re-enter thematerials stream via an establishedrecycling industry, often finding theirway into new products produced by
the steel, rubber, agricultural andpharmaceutical industries. Furthermore,zinc enables the production of precisionparts to net shape that requires no extramachining, thus contributing to energysavings. For more information about zincand sustainable development, please
visit www.zincworld.org.
9
Michael Bess is Secretary of the IZA World Committee on Die Casting
IZA 2002
Design - The European Communications Group - Brussels
Photos courtesy of Interzinc, Dynacast Inc. and Symbol Technologies
The Unseen Benefits of Zinc Die Castings
process, without any machining. That evenincludes the threads. This is due to zincsgood fluidity during the casting processand the tool makers ability to captureintricate detail in die cast tooling.The castings are then electroplated forenhanced conductivity, assembled withthe internal insulator and contact
(by simply deforming the casting to
capture these other pieces of theassembly) and it is ready for use. Themating cable connectors are also usuallyzinc die castings.
Throughout a typical day, zinc die castingsare all around us, as the engineeredcomponents that provide safety, security,
convenience and decoration for all of us.
7/28/2019 Unseen Benefit
11/12
Zinc pressure die casting alloys
Originally developed in the 1930s, zinc casting alloys are made from high
purity zinc, combined with small amounts of aluminum, magnesium, and
sometimes, copper. These small amounts of alloying materials transform zinc,
which in its pure form is a brittle, low-strength metal, into an engineeringmaterial, with high strength and hardness, good ductility and excellent
castability. The physical and mechanical properties of zinc alloys can be
negatively affected by impurities, so international specifications have been
developed for zinc die casting alloys, insuring consistent chemical quality.
Zinc casting alloys were originally used in decorative and non-structural
applications, but over the last several decades have gained acceptance as a
material for engineered components and structures. The castability and strength
of zinc alloys provide excellent design flexibility, expanding the capabilities of
the die casting process.
Mechanical properties (strength and ductility) are comparable, or even superior,
to many other cast materials such as aluminum, magnesium, brass and cast iron.
Zinc alloys have good bearing and wear resistance;performing like traditional
bronze bearing alloys in both dry and lubricated conditions. Zinc alloys perform
exceptionally well under conditions of moderate, continuous loading (like
threaded connections) or short term, high stresses. These alloys are typically not
used in applications where high continuous stresses or elevated temperatures
are encountered.
Zinc alloys are corrosion resistant under normal atmospheric conditions, in
neutral to alkaline pH aqueous solutions and in contact with petroleum
products. Like many other metals, the use of chromate or phosphate dip coatings
enhances corrosion resistance.
The commonly used zinc alloys (normally referred to as #3, #5, or #7) have a
unique combination of properties that allow for rapid, cost-effective production
of strong, durable and accurate components. In comparison to other non-zinc die
casting alloys (such as aluminum and magnesium), they are more easily cast,require less finishing, can be held to tighter tolerances, are cast in thinner
sections and are generally superior in strength and hardness. Zinc alloy die
castings are stronger, tougher and more dimensionally stable than injection
molded plastics. The development of a family of high strength (ZA) zinc alloys in
the 1970s created the opportunity for expanded zinc pressure die casting use in
higher performance applications, replacing cast iron, brass and bronze.
Zinc alloys are environmentally sound. They require less energy to convert from
ore to ingot to finished product than most competing materials. When properly
handled, zinc alloys do not create airborne pollutants or toxic waste products.
An infrastructure is actively in place to recycle zinc by-products and cast zinc
alloy products at the end of their useful life.
10
7/28/2019 Unseen Benefit
12/12
The Zinc logo is a registered trademark availab le to producers and users of zinc . For information, contact IZA.
International Zinc Association (IZA), 168 Avenue de Tervueren, 1150 Brussels - Belgium
Tel: 32.2.7760070 Fax: 32.2.7760089 Email: [email protected] Internet: www.zincworld.org
Zin
cProtects
!
www.dezign.orgcontains over 150 case studies demonstrating the
versatility of zinc in die cast applications as well asdetailed technical information on designing with zinc.