Pond & Beach RakeInstruction Manual

(Item # 580101)1 Year Warranty

4 View other great products on-line at www.thepondguy.com

PRODUCT WARRANTY:The Pond Guy® will repair or replace any The Pond Guy® Pond & Beach Rake found to be defective within 1 year of the original purchase date. This limited warranty is extended exclusively to the original purchaser beginning from the date of original receipt. Abuse or misuse of this product voids all warranty. Please call for a Return Authorization number prior to returning product by calling our Customer Care Department at 866-766-3435. Failure to request an RMA number may result in delay or dismissal of your warranty claim.

THANK YOU FOR CHOOSING:The Pond Guy® Inc.We Know Ponds™

15425 Chets WayArmada, MI 48005

866-POND-HELP (766-3435)thepondguy.com

Product Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Information. . . . . . . . . . . . . . . . . . . . . . . . 2Assembly Instructions Pond & Beach Rake . . . . . . . 3Using Your Pond & Beach Rake . . . . . . . . . . . . . . . . . 4Warranty Information. . . . . . . . . . . . . . . . . . . . . . . . . 4

Table of Contents:

Step 1: Secure the EyeboltInsert eyebolt (L) through hole in top of handle. Secure with nut (M) being careful not to over-tighten.

Step 2: Attach the RopeTie rope (E) onto eyebolt (L). Suggestion: Secure knot with a flexible, water-resistant tape (i.e electrical tape).

Step 1: Connect the HandleWe recommend wearing gloves. Depress snap buttons on one end of splice (F) while inserting splice into the end of the handle (B), opposite the head just attached.

Step 2: Connect the ExtensionGripping powder-coated blue surfaces (A & B), depress snap buttons on other end of splice (F) and insert splice into gripped handle (A), snapping into position.

Step 3: Ready for UseClearing the area of people and watercraft, the Rake may now be thrown, from a standing position to skim water surface weeds.

USING YOUR POND & BEACH RAKE:

Use with Extension Handle:

Use with Rope:

Package Contents POND & BEACH RAKE:

IMPORTANT INFORMATION:• The Pond & Beach Rake is not to be used as a lifesaving device. Competent

supervision is required at all times.

thepondguy.com | 866-POND-HELP (766-3435) 15425 Chets Way | Armada, MI 480052 3

Assembly Instructions POND & BEACH RAKE:

Step 1Attach the Rake HeadIdentify handle with slotted end (B). Insert rake head (D) into slotted end of handle. Align holes and insert one middle-size bolt (J). Do not tighten nut (M). Note: This product is engineered to have a tight fit. Tightening nuts before all bolts are inserted may result in improper fitting.

Step 2Align the BracesAlign holes of flat end of braces (G) with holes in rake head (D). Insert the two shortest bolts (I). Do not tighten nuts.

Step 4Tighten the Loc NutsOnce all bolts are inserted, tighten nuts (M), being careful not to over-tighten.

Step 5Attach the FloatAlign float (C) on front of rake head (D), as shown, and secure with Velcro cinching straps (H).

Step 3Attach the BracesAlign holes of wrap-around end of braces (G) with handle. Insert longest bolt (K). Do not tighten nuts (M).

Pond & Beach Rake

A 1 - Aluminum Handle (Vinyl Grip) H 2 - Velcro Cinching Straps

B 1 - Aluminum Handle (Black Cap) I 2 - Small Bolts

C 1 - Foam Float J 1 - Medium Bolt

D 1 - Rake Head K 1 - Large Bolt

E 1 - 50’ Polypropylene Rope L 1 - Eyebolt

F 1 - 8” Quick Connect Splice M 5 - Loc Nuts

G 2 - Wrap-Around Braces

A

BC

D

F

G

I J K L M

E

H

Tools Required:• Two (2) 7/16” Wrenches• Pair of Gloves