Valor 1000 CP3

May, 2007 Valor 1000W CP3-1

Oct, 2009

2Internal use only

Valor 1000W Series - Mission

Compete in low cost wet food production/ portioning segment with simple, portable and low cost precision

scale

3Internal use only

Valor 1000W Series - Concept

Address New Markets… Food production, sanitary weighing Wet, harsh working conditions Low cost compact food portioning

With New Product…. High profile, red LED display, internal battery Removable stainless steel pan, smooth housing “Water-in, water-out” design concept, IP65 PCB sealed

Deliver Ohaus Value Good performance, good quality, low cost Check and accumulate application modes Easy to clean, spray and keep sanitary

4Internal use only

Valor 1000W Series - USP’s

Water Resistant IP65 design “Water-Proof” housing Sealed & compartmentalized internal electronics Internal lead acid battery

Solid performance Resolutions up to 7,500d Level bubble and feet maximize accuracy 1.5 second or less stabilization time

Friendly operation Bright dual LED displays front and rear Easy to clean, Easy transport size Simple Check weigh, and accumulate functions

5Internal use only

Valor 1000W Series - Std Features

Standard FeaturesWater-Proof IP65 Design

ABS plastic housing with SS pan

Weighing units: kg, lb

Check weigh and Accumulate modes

Level bubble and adjustable feet

Internal rechargeable ~30 hour lead acid battery

6-digit, 7-segment LED front and rear

Stability indication, Auto zero tracking

Power saving auto shut off

Subtractive Tare up to capacity

Resolutions up to 7500d

Fast response time

6Internal use only

Valor 1000W Series – Models/Apps

V11PW3 V11PW6 V11PW15 V11PW30

3kg x 0.5g 6kg x 1g 15kg x 2g 30kg x 5g

Applications

“All Wet Market” (markets selling seafood, meats and other wet goods)

Food Industry

Food institutions

Pre-packaged food sector

Check weigh

Ingredient mixing

7Internal use only

Valor 1000W Series - Competition

Valor 1000W CAS SW Kern FAB A&D SK Gram DVCapacities 3-30kg 2-20kg 3kg, 6kg, 15kg 1-30kg 1-30kg

Resolution 7,500d 2,000e 1,500e 5000d (2000e) 11,000d (non apvd)

Housing ABS plastic ABS Plastic ABS Plastic with SS pan ABS PlasticABS plastic, adjustable

feetDisplay Red LED LCD Front LCD LCD Backlit LCD

Pan Size255 x 190 mmStainless Steel

9.05 x 7.48” Stainless Steel

229x196 mm9.05 x 7.48”

Stainless SteelSS Pan

PowerAC or Standard Lead acid

Battery ~30 hoursAC or 6 “AA” batteries for to 500-1000 hours

AC adapter standard, 2xD size batteries not included

up to 500hr

6 'D' size batteries (not included) for 600-1200

hours

AC or Standard Lead acid Battery ~200 hours

Units lb, kg lb, oz, kg, g g,kgSK series – lb/g or lb/kg

SK-Z – lb, lb:oz or gSK-D – lb/g or lb/kg

Weigh in g only

ModesCheckweighingAccumulation

None None None None

Approvals None NTEP, OIML EC/OIMLNSF, NTEP/PMT/CW&M on

SK and SK-D onlyNone

Options None Dual display NoneDual displayAC adapter

None

8Internal use only

Valor 1000W Series – OH Positioning

Valor 1000 Valor 1000W Valor 2000 Valor 3000 Valor 5000Cap x Read 3gk x 0.5g 3kg x 0.5g 3kg x 0.5g 200g x 0.01g 3kg x 0.5g

6kg x 1g 6kg x 1g 6kg x 1g 2000g x 0.1g 6kg x 1g

15kg x 2g 15kg x 2g 15kg x 2g 15kg x 2g

30kg x 5g 30kg x 5g 30kg x 5g

3kg x 0.1g

6kg x 0.2g

15kgx 1g

30kg x 1g

Housing ABS Plastic ABS Plastic ABS Plastic SS ABS Plastic

IP Rating None “Water-Proof“ IP65 All IP65 Some IP65 IP54

Max d 7,500d 7,500d 7,500d 20,000d 30,000d

Units kg,lb,g,oz kg,lb kg,lb,g,ozkg,lb,g,oz, lb:oz, dec oz, fr

ozkg,lb,g,oz, lb:oz, dec oz, fr

oz

Display Backlit LCD LED LED Backlit LCD Backlit LCD

Pan size 250x 180mm 257x192mm 229x184mm 146x158mm 209x209mm

Power AC and IR lead acid AC and IR lead acid AC and IR lead acid AC or 3 C battery AC and IR lead acid

Type Approvals None None NTEP/OIML NTEP/OIML NTEP/OIML

Certifications None None NSF, USDA NSF, USDA NSF, USDA

ModesWeigh, Check,

AccumulateWeigh, Check,

Accumulate weigh Weigh, % S-gravity, Fl oz Weigh, Check with LED

9Internal use only

Valor 1000W Series– Contents

Valor 1000W box includes:1x Scale

1x SS platform

1x AC adapter

1x 5 language operator manual

10Internal use only

Valor 1000W Series– Model Numbers

V: Family ID (V for Valor)

1: Series level (1000 series)

1: Version 1= First version of Valor 1000

P: Housing Designator (X = Stainless steel, P= Plastic)

W: Water-Proof

x: kg Capacity Digit

V11PWxx

11Internal use only

Valor 1000W Series– Keypad

On/OffShort Press: Turns scale on

Long Press: Turns scale off

SetLong Press: Enters menu mode

Menu function: Save settings and exit the menu

Tare (down arrow)Primary function: Tares weight of item on panMenu function: Decrement displayed value, or toggle through menu settings

M+ (up arrow)Primary function: Stores displayed weight in accumulation memoryDisplay accumulation data when display is at zeroMenu function: Increment displayed value, or toggle through menu settings

Mode (right arrow)Menu function: Shift to next digit when setting parameters, or step through menu settings

Zero (Yes)Primary function: Sets display to zeroMenu function: Confirm settings

12Internal use only

Valor 1000W Series– Setup

BasicsAttach mains power

Charge battery 8-12 hours before use

Set on firm level surface, adjust feet for leveling

If Required calibrate scale before operating

13Internal use only

Valor 1000W Series– Setup

Calibration Turn the scale on

During the start-up display [000000…999999], press and hold SET until [FS--SP] is displayed

Press YES to display [P x], where x = position of decimal point

Press to toggle through settings: 0, 1, 2, 3, 4

Press YES to select, then display [d x], where x = scale divisions

Press to toggle through settings: 1, 2, 5, 10, 20, 50

Press YES to select, then display scale capacity [xxxxxx] (kg)

14Internal use only

Valor 1000W Series– Setup

Calibration Press YES to select, then display [noLoAd]

Make sure pan is empty, then press YES to display [LoAd]

Press YES to select, then display default or last used span weight [xxxxxx] (kg)

Press , , to edit the displayed value (as needed)

Place indicated weight on the scale, then press YES

[CALEnd] is momentarily displayed to indicate calibration was successful, then exit to weighing mode

To abort calibration at any point, turn the scale off

15Internal use only

Valor 1000W Series– Operation

Basic Weigh Short press the On/Off button to turn on scale

Segment check and software version will be displayed

Keep pan clear and wait for stability and center of zero indicator.

Place container on scale and press Tare key.

Place object in container – net weight will be displayed, stability indicator will appear.

16Internal use only

Valor 1000W Series– Operation

Check Weigh (operate)

Use this mode to quickly compare samples to a specified tolerance range.

Press Zero key to set the display to zero.

Place a sample on the pan and read the weight and under / accept / over status on display.

Scale will beep when weight is in tolerance or outside tolerance (user selectable setting)

Note: When the unit of measure is changed, checkweigh limits and setting will be reset to “0”.

17Internal use only

Valor 1000W Series– Operation

Check Weigh (setup)

Over and Under Limits Press and hold Set until [SEt-F0] is

displayed. Press YES to view the upper limit

[000000] (or last value saved). The Over LED will illuminate

Press , , to edit the upper limit value (must be less than scale capacity).

Press YES to confirm, then view the lower limit [000000] (or last value saved). The Under LED will illuminate.

Press , , to edit the lower limit value (must be minimum of 20d scale divisions, and less than upper limit).

18Internal use only

Valor 1000W Series– Operation

Check Weigh (setup con’t)

Press YES to confirm, then view the alarm setting [rUn x], where x:0 = Checkweigh mode is disabled

1 = Checkweigh LEDs are active, beeper will sound when result is outside the Accept range

2 = Checkweigh LEDs are active, beeper will sound when result is within the Accept

range

3 = Checkweigh LEDs are active, beeper is disabled

Press to step through available settings, then press YES to select.

Press Set to save and exit.

19Internal use only

Valor 1000W Series– Operation

AccumulatePress Zero to set the display to zero.

Place the sample on the pan or tared container

Press M+ to store the weight of the sample. Storage is confirmed by the display [n x], where n is the sample number

Remove the sample and place the next sample on the pan and press M+

ΣAccumulate

20Internal use only

Valor 1000W Series– Operation

Accumulate (con’t)

Repeat this process until all samples have been weighed.

Review the accumulation data by pressing M+ when the display is at zero.

The display first shows the number of samples [n x]

Press M+ to view the maximum sample weight [Hxxxxx].

Press M+ to view the minimum sample weight [Lxxxxx].

Press M+ to view the total sample weight [xxxxxx].

ΣAccumulate

21Internal use only

Valor 1000W Series– Specifications

Specifications:Models: V11PW3 V11PW6 V11PW15 V11PW30Capacity x Readability 3 x 0.0005 kg

6.6 x .001 lb6 x 0.001 kg13 x .002 lb

15 x 0.002 kg33 x .005 lb

30 x 0.005 kg66 x .01 lb

Repeatability (std. dev. ±)

1g 2g 5g 10g

Linearity (±) 1g 2g 5g 10gWeight units kg or lbModes Weigh, Accumulation, CheckweighingTare Range 2/3 or full scaleStabilization Time ≤ 2 secondsPower Requirements 9VDC 500mA or 12VDC 420mA AC adapter

Internal rechargeable sealed lead acid batteryBattery Life 30-hour typical operation with 12-hour full chargeDisplay Type Front and Rear, 6-digit 7-segment, 14.2mm/0.56”H LED digitsPan Size 257W x 192D mm / 10”W x 7.5”DDimensions 248W x 270D x 174 minH mm / 9.8”W x 10.6”D x 6.9”HOperating Temperature Range

-10° to 40°C / 14° to 104°F≤90% relative humidity, non-condensing

Net Weight 3 kg / 6.6 lbShipping Weight 4.3 kg / 9.5 lb 4.2 kg / 9.3 lbShipping Dimensions 355W x 370D x

300H mm305W x 320D x 250H mm

Ingress Protection IP65

22Internal use only

Ohaus Solution: Customer Value:Customer Needs:

Lightweight, battery powered, Up to 7,500d resolution

U S P

Water resistant protection, IP65 PCB sealed

U S P Able to work reliably in wet environments

Low maintenance Trouble free operation

Compact, water resistant design

Valor 1000W Series– Value Prop

Portable with good performance

Easy to keep clean and store after day of use

Smooth shapes, no gaps, or ridges, removable pan, portable size

Easy to transport, no power cord needed, precision accuracy

U S P