VCE.Test-king.220-010.v2015-03-19.by.Esta - GRATIS … · VCE Vblock Systems Administration Exam I am very pleased with the accuracy of your great questions and answers in this VCE

Test-king.220-010.93.QA

Number: 220-010Passing Score: 800Time Limit: 120 minFile Version: 8.2

http://www.gratisexam.com/

220-010

VCE Vblock Systems Administration Exam

I am very pleased with the accuracy of your great questions and answers in this VCE file.

Thanks for a terrific dump. Without a doubt, your exam practice has made the difference in obtainingcertification.

The brain dumps are the latest, authenticated by expert and covering each and every aspect of yourexam.

It is the best preparation materials in terms of what to expect on the actual exam!

Save your time and get on time success in certification exams by using this latest dumps.

Guys!! this Dump will definitely help.

Exam A

QUESTION 1Which document is used to validate latest Vblock® System firmware and software level compliance?

A. Administration GuideB. Architecture GuideC. Release Certification MatrixD. Logical Configuration Survey

Correct Answer: CSection: (none)Explanation

Explanation/Reference:

QUESTION 2Which Vblock® System logs are sent to this server to facilitate reporting alerts and troubleshooting?

A. syslog serverB. vCenter serverC. Unisphere serverD. SQL server

Correct Answer: DSection: (none)Explanation


QUESTION 3What is the UCSM concept that confirms associated blade server hardware has the required configuration?

A. TemplatesB. Service profilesC. Resource poolsD. Server pools

Correct Answer: BSection: (none)Explanation


QUESTION 4Which protocol is used to provide block storage connectivity in a Vblock® System 200?


A. FCoE

B. NFSC. iSCSID. FC



QUESTION 5What are three supported disk types for a Vblock® System 720? (Choose three)

A. EFDB. FCC. SASD. SATAE. NL_SAS

Correct Answer: ABDSection: (none)Explanation


QUESTION 6A customer wants to take an existing VCE Vblock® System compliance policy and tailor it to theirenvironment. Which element manager would you recommend?

A. VCE VisionTM Intelligent OperationsB. UCSMC. UnisphereD. vCenter

Correct Answer: ASection: (none)Explanation


QUESTION 7A new Vblock® System 720 customer is interested in managing initiator groups and monitoring virtualprovisioning.

Which element manager would you recommend?

A. VCE VisionTM Intelligent OperationsB. UnisphereC. UCSMD. Data Center Network Manager



QUESTION 8What is the MTU size for an VMware vSphere ESXi host network adapter using NFS?

A. 1500B. 5000C. 9000D. 9216



QUESTION 9A test group no longer needs test resources allocated within the Vblock® System 340. You decommissionthe resources and delete their specific VLAN on the Nexus 5548 switch. What happens to the portsassociated to that VLAN?

A. The ports are up but suspended.B. The ports continue to forward traffic.C. The ports are shut down and no traffic flows.D. The system deletes all the VLAN-to-port mapping for that VLAN.



QUESTION 10What information is needed to configure the VSM-to-vCenter communication (SVS connection) for a Nexus1000V? (Choose two)

A. The data center name in the vCenter serverB. The vCenter server IP address/FQDNC. The control and packet VLAN Port Group nameD. The UUID of the physical server running VMware ESXi

Correct Answer: ABSection: (none)Explanation


QUESTION 11You are performing storage administration on a Vblock® System 340 and the virtualization administratorrequires two block stores and two file stores. What are the underlying protocols used for the data stores?(Choose two)

A. FCB. SATAC. NFSD. CIFS

Correct Answer: ACSection: (none)Explanation


QUESTION 12You have a Vblock® System 340 in a unified network configuration and you need to provide connectivity forfile and block storage. Which component would you use to provide connectivity between the server and thestorage resources?

A. MDS 9100 switchesB. Nexus 5500 switchesC. VNX Data MoverD. VNX Storage Processors



QUESTION 13Which two VLANs should be configured as a Nexus 1000V VLAN in a Vblock® System? (Choose two)


A. packet VLANB. data VLANsC. private VLAND. control VLAN

Correct Answer: ADSection: (none)Explanation


QUESTION 14While managing a Vblock® System 720, you need to configure connectivity between the storage and aspare blade.

In addition to the zone name and the FC alias, what are three requirements to create the initial zone?(Choose three)

A. WWPN of the storage processorB. VSAN IDC. WWPN of the front-end directorD. FC IDE. WWPN from UCSM

Correct Answer: BCESection: (none)Explanation


QUESTION 15What is the requirement for VLAN setup in a UCS environment?

A. LAN and FCoE VLANs must have different IDs.B. VLANs with IDs from 0-1024 are reserved and cannot be used.C. VLANs must be created in parallel on each fabric with identical VLAN IDs.D. VLAN IDs must be unique to each fabric.



QUESTION 16What is the EMC-defined best practice for LUN ownership across storage processors on a Vblock®System 340?

A. Dedicate SP ownership; even numbered blade server LUNs are owned by SP A and odd numberedblade server LUNs are owned by SP B.

B. Dedicate SP ownership; odd numbered blade server LUNs are owned by SP A and even numberedblade server LUNs are owned by SP B.

C. Alternate SP ownership; even numbered LUNs are owned by SP A and odd numbered LUNs areowned by SP B.

D. Alternate SP ownership; odd numbered LUNs are owned by SP A and even numbered LUNs areowned by SP B.



QUESTION 17Your VMware administrator is asked to assign more storage to a virtual machine but does not havesufficient capacity available on the existing data stores.

Which three steps would you perform to assign the requested storage? (Choose three)

A. Create a data LUN on the storage array.B. Create a new data storage pool on the storage array.C. Assign a data LUN to the ESXi host groups.D. Assign a new data storage pool to the ESXi host groups.E. Rescan storage and create a new data store.

Correct Answer: ACESection: (none)Explanation


QUESTION 18A business user is deploying a new application on a virtual machine and requires this application to beisolated from the rest of the network due to compliance requirements. Your security team will implement afirewall and requires you to set up a dedicated network.

Which three tasks are part of the configuration steps? (Choose three)

A. Add the VLAN to the appropriate service profile.B. Add the VLAN to the appropriate System Policy.C. Create the VLAN on the Fabric Interconnect.D. Create the VLAN on the VMware NSX virtual switch.E. Create the VLAN on the Nexus 1000V virtual switch.



QUESTION 19You are required to physically move a blade from one UCS chassis to another UCS chassis.

What must be done to the service profile in the UCSM before moving the blade?

A. Shut down the server.B. Start fault suppression.C. Unbind from the template.D. Disassociate the service profile.



QUESTION 20A business application is not functioning. After working with the vendor, it is determined that server powermanagement features are interfering with the application and need to be disabled.

Which policy would you modify to meet the application requirements?

A. local disk policyB. boot policyC. BIOS policyD. Intel SpeedStep policy



QUESTION 21You are deploying a new customer application on virtual machines. The application team has decided toimplement an external load balancer for this application but wants to ensure that all the virtual machines

are running on different ESXi hosts.

Which action should you perform to meet the application team's requirement?

A. Apply a DRS VM-VM affinity rule on your VMware cluster for the application virtual machines.B. Apply an HA VM-Host affinity rule on your VMware cluster for the application virtual machines.C. Create a vAPP and create a vAPP affinity rule on your VMware cluster for the application virtual

machines.D. Configure the application virtual machines to use VMware Fault Tolerance affinity rules.



QUESTION 22You are deploying a new business critical application that cannot have any down time. The new businessapplication does not support clustering and you decide to implement VMware Fault Tolerance.


Which two configurations must be in place to support the business application? (Choose two)

A. The virtual machine is configured with 1 vCPU.B. The virtual machine is configured with raw device mappings for storage.C. The ESXi host is configured with a data store heartbeat for fault tolerance.D. The ESXi host is configured with a kernel port for fault tolerance logging.



QUESTION 23You are deploying a new multi-tiered application consisting of a Web server, an application server, and adatabase server. When the virtual machines for the application are started, the database server must bestarted first followed by the application server and the Web server.

What would you implement to meet the application requirements?

A. VMware DRS affinity rulesB. vSphere CPU affinity rulesC. vSphere vAppD. VMware App Startup



QUESTION 24You are asked to configure vMotion on a Vblock® System 340.

According to VCE best practice, what is required to enable this feature?

A. Use separate subnets for vMotion source and destination hosts.B. Enable jumbo frames for the vMotion network.C. Select a dedicated VLAN for the vMotion traffic.D. Use the same subnet as AMP management traffic.



QUESTION 25You receive a high priority new VM request that requires the creation of redundant VMs with hostredundancy.

Which vCenter task must be performed to satisfy this requirement?

A. Configure host and VM monitoring.B. Configure a VM-Hosts affinity rule in vSphere DRS.C. Configure a custom VM monitoring rule in vSphere HA.D. Configure a VM-VM affinity rule in vSphere DRS.


Explanation/Reference:Updated.

QUESTION 26You are configuring storage groups for new ESXi hosts residing on a Vblock® System 200. A customer hasasked for storage separation across virtual machines.

Where should the VMFS configured LUNs reside?

A. In the same storage group where the boot from the SAN LUN residesB. In a single storage group with all the other ESXi hostsC. In multiple storage groups configured for each hostD. In a single storage group configured for the control station



QUESTION 27Which two services should be disabled to secure a Vblock® System? (Choose two)

A. SNMPv2cB. SMASH CLPC. KVM Management

D. HTTP



QUESTION 28What are three methods to isolate tenants in a multi-tenant environment? (Choose three)

A. Create separate server pools.B. Define Role Based Access Control.C. Create separate VLAN(s) for each tenant.D. Disable specific ports for insecure services.E. Separate zoning for storage units.



QUESTION 29The vCenter administrator account has become locked.Which two actions will unlock the account? (Choose two)

A. Log in to the vCenter server as a local administrator, change the local account policy to not lock afterthree failed logon attempts.

B. Log in to the vSphere Web Client as an SSO administrator, navigate to Users and Groups and unlockthe affected user account.

C. Log in to the vCenter Server with a domain administrator account, use the vdcadmintool to reset theaccount password.

D. Log in to the vSphere Web Client as a user with the role Virtual Machine Power User, navigate to theUsers and Groups and unlock the affected account.

Correct Answer: BCSection: (none)Explanation


QUESTION 30You have deployed a pool of UCS blades to support a development environment that is managed by adevelopment support team. The development support team requires console access to their blade servers.You created a role in the UCSM that only allows console access and power operations.

Which mechanism is used to ensure that you only assign the development support team to the bladeservers that they support?

A. Multi tenancy policiesB. Isolation poolsC. Service profilesD. Organizations

Correct Answer: DSection: (none)

Explanation


QUESTION 31Click the Exhibit button

-- Exhibit --

-- Exhibit --

What is determined from the output shown in the exhibit?

A. VLAN 112 has been assigned as the management VLAN.B. Pooling has been configured.C. The show vlan command has been executed.D. VSAN 112 has been configured.



QUESTION 32What is the result of using the same VLAN ID for both a VLAN and an FCoE VLAN in a VSAN?

A. All traffic is automatically forced to 10 GbE speed and jumbo frames enabled.B. A critical fault will be created with traffic disruption for all vNICs and uplink ports using that VLAN.C. A warning fault will be created with performance degradation within the VLAN.D. FCoE traffic will be forced down to the speed and frame size set on the vNICs



QUESTION 33Your company just hired a new employee and the company wants to allow this employee to have read onlyaccess to the VMware environment and full access on a test cluster.

How would this be done?

A. At the data center level, grant the employee a role that allows full access.B. At the data center level, grant the employee a role that allows read only accessC. At the data center level, grant a role with read only access and at the test cluster level, grant a role that

allow full access.D. At the data center level, grant a role with full access and at the test cluster level, grant a role that allows

read only access.



QUESTION 34Click the Exhibit button.

-- Exhibit --

vsan 1 informationname:VSAN0001 state:activeinteroperability modE. default loadbalancing:src-id/dst-id/oxidoperational state:down

-- Exhibit --

Referring to the exhibit, which statement is correct?

A. VSAN is able to pass traffic.B. VSAN is not able to pass traffic.C. At least one port on the VSAN is up.D. VSAN is disabled.



QUESTION 35You are adding a new VLAN to your Vblock® System 340. You create the VLAN on both your Nexus 5000series switches.

Which two steps are required before this VLAN should be used? (Choose two)

A. Add the VLAN to an untagged port channel.B. Add the VLAN to the port channel between the Nexus 5000 switches and Fabric Interconnects.C. Add the VLAN to the port channel joining the Nexus 5000 switches.D. Create a new port channel between the Nexus 5000 switched and Fabric Interconnects with the new

VLAN.



QUESTION 36You are asked to create a new UCS template for an upcoming project.

What information is required for the template? (Choose two)

A. Fully qualified domain names for each UCS bladeB. The World Wide Node Name (WWNN) pool to useC. The vNIC adapter policyD. The template UUID



QUESTION 37During a configuration audit of your VMware environment, you determine that one of your data stores issmaller than specified by your company's standards. The data store is connected to all hosts in the clusterand is running virtual machines.

Which two actions would you perform to ensure that the data store meets the standards? (Choose two)

A. Remove and re-create the LUN on the storage array.B. Expand the LUN on the storage array.C. Increase the data store size in vCenter.D. Use vMotion to move virtual machines to another host.



QUESTION 38Your company needs to add a new masking view to their Vblock® System 720.

Which three grouping constructs must be selected? (Choose three)

A. Initiator groupB. Disk groupC. Storage groupD. Device groupE. Port group



QUESTION 39You are creating UCS profiles from a template in an environment with multiple organizations defined. TheWWNN resource pool for the organization is empty and no default WWNNs are defined.

In this scenario, which statement is true?

A. Resource pools lower in the hierarchy will be searched.B. Resource pools higher in the hierarchy will be searched.C. Resource pools at the same level in other hierarchies will be searched.D. A factory defined random WWNN will be generated.



QUESTION 40You need to provision a new Cisco UCS blade on your Vblock® System 340 using UCSM.

What are two methods to accomplish this task? (Choose two)

A. The service profile can be provisioned from a template.B. The service profile can be provisioned to multiple blades.C. The service profile can be cloned from another service profile.D. The service profile can be provisioned from a service manager.



QUESTION 41You are working on latency problems with a storage pool in your Vblock® System 340. After investigation,you decide that the FAST Cache must be expanded on the VNX.

What is required to accomplish this task?

A. All additional EFD drives must be in the same storage pool as the existing FAST Cache drives.B. A separate FAST VP cache is created and storage pools are migrated to it.C. The existing FAST Cache must be deleted and the entire cache re-created.D. SP Write Cache must be disabled for all pools using FAST Cache prior to expansion.



QUESTION 42You are asked to create a series of LUNs within a storage pool that will be used as VMFS data stores andyou are unsure what the performance requirements will be.

According to EMC, which FAST Tiering Policy should you use?

A. Auto-TierB. Start High then Auto-TierC. Highest Available TierD. Lowest Available Tier



QUESTION 43Your Vblock® System 720 was set up with a FAST VP policy of 100% EFD, 100% FC, with 100% SATA,and then applied the policy to all the storage groups. You have allocated all thin LUNs from the FibreChannel pool and would like to ensure that all but 10% of the EFD drives can be used by the FAST policy.

Which setting would you use to accomplish this task?

A. Adjust the Pool Reserved Capacity to 10.B. Adjust the compression rate to 10.C. Adjust the Data Movement Mode to 10.D. Adjust the Relocation Rate to 10.



QUESTION 44You are asked to add a new ESXi host to an existing VMware cluster. You identify an available blade withthe same specifications.

Which statement is a VCE recommendation?

A. Hosts in a VMware cluster should each belong to a different VSAN.B. Service profiles in a VMware cluster should be kept on as few chassis as possible.C. Service profiles in a VMware cluster should be spread out over as many Vblock® Systems as possible.D. Hosts in a VMware cluster should always belong to the same service profile template.



QUESTION 45You have added physical disks to your Vblock® System 720 to a physical disk group and then created datadevices.


What must you do to see the new capacity?

A. Add the devices to the masking group.B. Map the devices to the front end ports.

C. Add the devices to the thin pool and enable them.D. Add the devices to the FAST VP policy.



QUESTION 46Click the Exhibit button.

-- Exhibit --

-- Exhibit --

You are adding a new VM within vCenter when the error shown in the exhibit occurs.

What does this error indicate?

A. The Standard vSwitch has run out of ports.B. The Standard vSwitch has run out of port licenses.C. The Nexus 1000V switch has run out of port licenses.D. The Nexus 1000V switch has run out of ports.



QUESTION 47You have a single storage pool that has been dedicated for quality assurance and development purposes.Both groups have submitted requests for LUNs, but the total LUN capacity requested exceeds the totalavailable capacity of the pool by several terabytes.

What would you do to satisfy both groups' requests?

A. Compress the LUNs.B. Split the total pool capacity equally between both groups.C. Use thin provisioned LUNs to oversubscribe capacity.D. Provide network file space to offset the difference.

Correct Answer: CSection: (none)

Explanation


QUESTION 48Which UCSM policy defines values for alerts?

A. ServerB. ThresholdC. FirmwareD. Local Disk



QUESTION 49Your environment uses resource pool management to automate and enforce device identities in yourorganization including troubleshooting.

In this scenario, which three resources are managed? (Choose three)

A. MAC addressesB. WWNsC. LUN IdentifiersD. UUIDsE. Secured Service Ports

Correct Answer: ABDSection: (none)Explanation


QUESTION 50You are using expandable resource pools in your VMware cluster to ensure each environment is allocatedthe appropriate resources. There is a resource pool for your development environment that has areservation of 5 GHz CPU and 12 GB of memory. There is a child resource pool of the developmentresource pool named Sandbox that has a reservation of 1 GHz CPU and 4 GB of memory. You create fournew virtual machines with 4 GB of memory in the Sandbox environment.

In this scenario, which statement is true?

A. Only one of the new virtual machines will power on.B. All new virtual machines will power on.C. Only three of the new virtual machines will power on.D. No new virtual machines will power on.



QUESTION 51You are performing a full state backup operation of the UCS.

Which two data sets are protected? (Choose two)

A. System configurationB. Server backup dataC. Logical configurationD. Configuration XML



QUESTION 52After a power failure, the Fabric Interconnects have lost their configuration and must be restored from aprevious UCS backup operation.

Which type of configuration would be used to resolve this problem?

A. System configurationB. Logical configurationC. All configurationD. Full state



QUESTION 53You attempt to activate a port on an MDS using the port-license acquire command and the switch returnsthe message "port activation license not available".

How would you determine if you have sufficient licenses?

A. Run the show license command to display the available license information.B. Run the show run command to see the license configuration.C. Run the show port-resources module command to display the available port resources in a module.D. Run the show port-license command to display the available port activation licenses.



QUESTION 54While monitoring your PowerPath/VE licensing, you notice that some of your hosts are no longer licensed.

In this scenario, which statement is correct?

A. PowerPath will continue to function but will not allow more devices to be configured.B. PowerPath will route all traffic down one path, disabling the alternative path.

C. PowerPath will switch to round robin mode but will not allow more devices to be configured.D. PowerPath will continue to route traffic but will lose some management features.



QUESTION 55How do you create a log bundle for the Nexus 1000V virtual switch module (VSM)?

A. Use the vCenter client to generate a VMware support bundle.B. Execute the vem-support all command from the shell on each ESXi host.C. Run the show tech-support svs > bootflash:techsupport.log command from the VSM shell.D. Use the Java-based Nexus 1000V log bundle creator on the element manager.



QUESTION 56While troubleshooting a VCE VisionTM Intelligent Operations problem, you notice that the rsyslog file wasempty.

Which action should you perform first?

A. Start an SSH session to the VCE VisionTM software system library and verify the FMagent status.B. Log on to the vSphere Web Client and verify that the VCE Vision software system library was installed.C. Start an SSH session to the VCE Vision software system library and verify the service status.D. Log on to the Vision GUI, and run a compliance report.



QUESTION 57During a routine audit, you notice that the VCE VisionTM Intelligent Operations health score is 72 andhighlighted in yellow.

Where is this information found?

A. Compliance ScanB. Event tabC. login bannerD. Vblock®.xml file



QUESTION 58A physical server in the Vblock® System 200 is experiencing intermittent problems.

What does VCE recommend to log the events?

A. Add a network time protocol (NTP) server to the Cisco UCS instance.B. Use VCE VisionTM Intelligent Operations to monitor and alert all connectivity issues.C. Use SNMP and e-mail all severity one alerts.D. Add an SNMP server using Cisco Integrated Management Controller.



QUESTION 59You have a problem with a Vblock® System 340 VNX array. While talking with support, they request thatyou generate an SP Collect and send it to them.

How do you collect this data?

A. Log into USM and send diagnostics data to VCE VisionTM Intelligent Operations.B. Log into USM, click on Diagnostics and Capture Diagnostics Data.C. Log into USM, generate SP Collect, and get SP Collect for each SP.D. Log into USM, Capture Diagnostic Data, and get capture diagnostic data.



QUESTION 60By not deleting their snapshots, a customer filled a data store to 100% capacity preventing other VMssharing the same data store from starting or restarting.

Which vCenter operation would have helped identify this problem?

A. Use the vCenter VCE VisionTM Intelligent Operations monitoring plugin.B. Use the vCenter alarm set to trigger a reporting action once the data store reached capacity.C. Use the vCenter thin to thick vmdks to force a static quota.D. Use vCenter Orchestrator to create a new data store and migrate when needed.



QUESTION 61An application can no longer access its allocated storage on a Vblock® System 340.

According to Cisco MDS troubleshooting guidelines, which action would be used to investigate theproblem?

A. Enable system message logging.B. Use Unisphere to view fabric problems.C. Determine if the host has ever been able to see VNX storage.D. Determine if the host recognizes any LUNs in the VNX storage system.



QUESTION 62Which two components are part of the Vblock® System infrastructure? (Choose two)

A. Network switchesB. Production application softwareC. Storage arrayD. Database software

Correct Answer: BDSection: (none)Explanation


QUESTION 63Which management software is used to administer physical blade servers on VCE Vblock® Systems?

A. UCSMB. UnisphereC. DCNMD. vCenter


Explanation/Reference:Corrected.

QUESTION 64Which network configuration is often used to isolate network traffic?

A. FTPB. SSHC. VLAND. TCP



QUESTION 65What is the set of configured disks used to safe guard data accessed by thin devices?

A. storage poolB. server poolC. MAC address poolD. UUID pool



QUESTION 66You are making some changes in connectivity in your network layer and are concerned about the portlicensing on your Fabric Interconnect.

If you disable a port, which statement is true?

A. You must log into the Fabric Interconnect to de-authorize the license assigned to that port.B. You must edit the license file on the Fabric Interconnect to specify which license is now free.C. The licenses are dynamically added back to the license pool.D. You must force a license rescan on your UCS to recapture the license.



QUESTION 67You are working with VCE Support and are asked to send the complete support log bundle for your MDSswitch.

Which statement describes what you should do?

A. Connect to the MDS switch and run the show accounting log command.B. Connect to the MDS switch and run the show flogi command.C. Connect to the MDS switch and run the show tech-support detail command.D. Connect to the MDS switch and run the show zone analysis vsan command.



QUESTION 68What is the interface used to administer physical servers in a Vblock® System 200?

A. CIMCB. DCNMC. UCSMD. Unisphere

Correct Answer: ASection: (none)

Explanation


QUESTION 69You need to reconfigure storage on your VNX and you do not want to disrupt your ESXi host. This activitywill require rebuilding some of the LUNs that are currently presented to ESXi hosts.

Which action must be performed on vCenter to meet this requirement?

A. Unmount data stores associated with LUNs that will be reconfigured.B. Rename data stores associated with LUNs that will be reconfigured.C. Enable storage I/O control on data stores associated with LUNs that will be reconfigured.D. Upgrade the data store to VMFS5.



QUESTION 70You are asked to permanently shrink a vSphere cluster from five nodes to four nodes. You confirm that allfive ESXi hosts are at less than 20% utilization. You also confirm that VMware DRS is properly configuredand running on the cluster.

Which procedure should be followed to shrink the cluster?

A. In UCSM, stop the server then delete the service profile; in vCenter, delete the host.B. In vCenter, put the ESXi host into maintenance mode, remove the host from the cluster; in UCSM, stop

the server then delete the service profile.C. In vCenter, put the ESXi host into maintenance mode, remove the host from the cluster; in UCSM, stop

the server then disconnect the service profile.D. In UCSM, stop the server then delete the service profile; in vCenter, put the ESXi host into maintenance

mode, remove the host from the cluster.



QUESTION 71You need to clean up your UCS environment. You discover that you have old UCS software bundles in yourUCS system. You want to delete these bundles from the system, but not create faults.

Which action should you perform prior to deletion?

A. Delete any host firmware packages that use those bundles.B. Change your reboot policy to User Ack.C. Ensure that there are no pending activities.D. Ensure that no components have this firmware in their backup versions.



QUESTION 72You are managing a Vblock® System and have been asked to prove the Vblock® System is using the mostrecent firmware version across all components in their environment.

Which VCE VisionTM Intelligent Operations feature would you use to accomplish this task?

A. Health MonitorB. Compliance CheckerC. System LibraryD. Adapter for vCenter Operations Manager



QUESTION 73Which management application is used to discover the Cisco MDS switches in the network?

A. UCSMB. UIMC. UnisphereD. DCNM



QUESTION 74An existing customer wants to add external IP addresses to its management pool.

Which element manager would you recommend?

A. Data Center Network ManagerB. UnisphereC. VCE VisionTM Intelligent OperationsD. UCSM



QUESTION 75Your company wants to change a new host firmware package in a service profile.


What must you consider before completing this task?

A. Host firmware packages do not have adapter settings.B. Host firmware packages can only be used in one service profile.C. Host firmware package settings can change network settings.D. Host firmware package changes might cause the blade to reboot.



QUESTION 76You provisioned a new LUN in your Vblock® System 340 that needs to be added to a VM as an RDM.

Which operation should be performed first to accomplish this task?

A. Select Physical Compatibility so that all SCSI commands will be passed from the guest OS.B. Select VMDirectPath I/O passthrough and choose a multi-root I/O device on the host so that all SCSI

commands will be passed from the guest OS.C. Rescan the SCSI bus on the guest operating system to make the RDM devices visible.D. Rescan the HBAs on all of the ESXi servers in your Vblock® System.



QUESTION 77You are managing a Vblock® System 340 and need to configure an additional ESXi server. After loadingthe server, you need to provision a few data devices to the host.

According to VCE best practices, which starting LUN ID should be used for these data devices?

A. 10B. 32C. 100D. 132



QUESTION 78A company wants to ensure that they monitor the amount of storage used by thin provisioned VMs.

What should be used to accomplish this task?

A. vCenter VM Edit Settings menuB. vCenter storage mapsC. vCenter storage reportsD. vCenter hardware status page



QUESTION 79You are using the default settings for VCE VisionTM Intelligent Operations. Three minutes after an event isreported in UCSM, it is still not reported in Vision.

Which statement is correct?

A. Verify the network connection between the system library virtual machine to the UCSM's virtual IPaddress.

B. VCE VisionTM software login credentials on vCenter may be incorrect.C. Verify your HTTP settings in UCSM.D. VCE Vision software is operating as expected.



QUESTION 80A company wants to track every fault on UCS that UCSM declares as "should be fixed immediately."

Which fault level is the lowest level to track?

A. WarningB. MajorC. CriticalD. Minor



QUESTION 81VCE has just deployed a Vblock® System in your data center and you want to validate the system's health.

Which two components would you monitor using UCSM to accomplish this task? (Choose two)

A. Port licensingB. Fabric InterconnectsC. Server bladesD. Chassis back plane



QUESTION 82While managing a Vblock® System 340 you monitor the system for optimal performance configuration.

Which VNX storage performance characteristic should be viewed to confirm expected storage behavior?

A. Verify that mission critical data is accessed from EFD.B. Verify that the workload is balanced across the storage processors.C. Verify that the storage processors are configured with the same amount of cache.D. Verify that small and large I/Os are targeted to different storage processors.


Explanation/Reference:Super valid.

QUESTION 83An application owner complains about poor application performance since the application was moved tothe Vblock® System 340. Your Vmware administrator determines that the storage used for this applicationhas a very high latency.

Which step would you take to gather information from your storage array to send to EMC technicalsupport?

A. Generate a diagnostic file for each storage processor in Unisphere.B. Generate a diagnostic file for each block pool in Unisphere.C. Create a support bundle for each RAID group in Unisphere.D. Create a support bundle for the FAST cache in Unisphere.



QUESTION 84Which two elements are required to configure a SAN boot policy? (Choose two)

A. boot target naai IDB. boot target CHAP authenticationC. boot target LUND. boot target WWPN

Correct Answer: CDSection: (none)Explanation


QUESTION 85You want to modify settings in the UCS.

To which IP address should you point your browser?

A. the IP address of UCS fabric extender BB. the IP address of UCS fabric extender AC. the IP address of the Vblock® System management switchD. the IP address of the UCS Manager Cluster



QUESTION 86What are two reasons a Vblock® System administrator would use the Release Certification Matrix?(Choose two)

A. Introduce new component support.B. Document end-of-life component support.C. Upgrade software levels to resolve problems.D. Identify known problems with specific code revisions.



QUESTION 87A Nexus switch requires a code upgrade to be compatible with other features in the Vblock® System 340.

What would you do to ensure that the correct code version is used?

A. Generate a benchmark report.B. Consult with the on-line help.C. Upgrade to the latest version.D. Consult the Release Certification Matrix.



QUESTION 88A customer is interested in executing the VCE VisionTM Intelligent Operations Compliance Checker.What is required to access the local RCM data?

A. CAS authentication credentials for the administratorB. vSphere administrator credentialsC. Administrator authentication to VCE VisionTM Intelligent OperationsD. Full access rights to the RCM



QUESTION 89You are configuring UCS backup operations to send data from a remote office to a central repository, butthe internal firewall is preventing these jobs from succeeding.

Which three protocols must be allowed through the firewall? (Choose three)

A. HTTPB. SCPC. FTPD. RSHE. TFTP



QUESTION 90Which vSphere feature would be used to move a virtual machine's back-end files to a different data store?

A. DRSB. FTC. Storage vMotionD. HA



QUESTION 91You are adding an NFS volume to an ESXi host.

Which two steps are required to accomplish this task? (Choose two)

A. Assign a VLAN to the vmkernel interface.B. Create a network label to identify the connection.C. Choose the NFS folder name in the format /vol/mounts/datastore1.D. Choose Network File System as the storage type.

Correct Answer: CDSection: (none)Explanation


QUESTION 92While managing a Vblock® System 340, you monitor the system for optimal performance configuration.

Which ESXi CPU performance metric should be viewed to confirm expected ESXi CPU behavior?

A. CPU ActiveB. CPU UsageC. CPU GrantedD. CPU Consumed



QUESTION 93Your company wants to know if you are currently having problems with your MDS switches. You want toreview for potential problems using VCE VisionTM Intelligent Operations.Which group would contain this component?

A. ComputeB. StorageC. NetworkD. Management


Explanation/Reference:Rechecked, it's right absolutely.


Documents

VCE.Test-king.220-010.v2015-03-19.by.Esta - GRATIS … · VCE Vblock Systems Administration Exam I am very pleased with the accuracy of your great questions and answers in this VCE