8
Viega Mono Tec Viega Mono Slim Only 8 cm installation depth.

Viega MonoSlim & MonoTec Brochure

Embed Size (px)

Citation preview

Page 1: Viega MonoSlim & MonoTec Brochure

Viega Mono Tec Viega Mono SlimOnly 8 cm installation depth.

Page 2: Viega MonoSlim & MonoTec Brochure

2

Award-winning Design for the 8 cm Cistern:Viega Actuating Panels.

A combination of technology and designWith Viega Mono Tec and Viega Mono Slim, Viega offers you a cistern of the highest technical quality, with only 8 cm installation depth.Through the further development of the tried and tested technology, you can choose from the entire range of Visign actuating panels* when designing the bathroom.

Extensive rangeWith the three Viega design ranges: Visign for More, Visign for Style and Visign for Life, you can arrange your bathroom individually according to your tastes with a multitude of shapes, colours and materials.

Page 3: Viega MonoSlim & MonoTec Brochure

3

* When using the actuating panels Visign for More 101 and Visign for More 100 and 103 sensitive with battery operation in combination with the 8 cm cistern, it is necessary that there is at least 5 cm of plaster applied to the front side of the cistern.

** Tempered glass.

The products shown here represent a selection.All of the designs and colours can be found in the product catalogue.

Visign for More 104

Visign for More 100

Metal, stainless steel colours

Visign for More 100 sensitive (230 V)*

TG**, clear/mint green

Visign for More 102

TG**, clear/light grey

Visign for More 103

TG**, parsol/black Metal, chrome-plated

Visign for Style 10 Visign for Style 11 Visign for Style 12

Plastic, chrome-plated Plastic, fine matt/velour-chromePlastic, stainless steel colours

Visign for Style 13

Plastic, alpine white

Visign for Style 14

Plastic, alpine white

Visign for Style 12

TG** clear/light grey chrome-plated actuator

Visign for More 101*

TG**, clear/mint green

Visign for More

Visign for Style 12

TG** clear/mint green alpine white plastic actuator

Visign for Style

Page 4: Viega MonoSlim & MonoTec Brochure

4

1

Viega Mono Tec and Viega Mono Slim:The fitting solution for every Situation.

No matter what you intend to do – be it a wall-hung WC/-bidet or a simple floor-standing WC – Viega offers you the fitting solution.

Page 5: Viega MonoSlim & MonoTec Brochure

5

64 cm 76 cm66 cm

2 3 4

Viega Mono Tec-WC, 8 cm Frame made of galvanised steel with integrated support for attachment of wall-hung WC

Flush pipe With connection elbow Pre-assembled water pipe Version with flush pipe and ventilator connection also available

Viega Mono Tec-Bidet, 8 cm Frame made of galvanized steel with integrated support for wall-hung bidet attachment Infinite setting range of the connections

Viega Mono Slim-WC-Cistern, 8 cm (1) Simple fastening to the masonry through two lugs Insulated flush pipe Supplementary vertical adjustable flush pipe (2 cm upwards, 1 cm downwards)

Even with pre-wall you can save spaceIn addition to concealed installation, it is possible to position the element Viega Mono Tec in front of the wall (2). The space required is not more than the space used for several traditional instal-lation methods (3 and 4). This solution supports the structure of the wall, pro-vides better noise reduction and more freedom when positioning WCs and bidets.

Pre-wall installation Viega Mono Tec-WC and Viega Mono Tec-Bidet.Concealed installation Viega Mono Tec-WC and Viega Mono Tec-Bidet.

Page 6: Viega MonoSlim & MonoTec Brochure

6

The 8 cm cistern from Viega: Compactly packed technology.

Page 7: Viega MonoSlim & MonoTec Brochure

7

1 piece construction ductProtection against dirt on the building site.

With the Viega Mono Tec and Viega Mono Slim, Viega offers you familiar Viega technology and Viega quality – compactly packed in only 8 cm.

Completely pre-assembled water pipeA water pipe is completely pre-assembled in the cistern. The connection from outside takes places via a wall bushing with a ½" female thread. For this reason, the cistern can stay closed during the building work.The connection to an already securely fitted adaptor takes place via a rotatable wall bushing. Important: the corner valve inside must be removed beforehand.

1-piece drain valve (1)The advantages of this product are not just to be found in the details. The drain valve is 1-piece and can be exchanged as such. A crucial advantage during assembly and maintenance, as no pieces can fall into the cistern.

9 l flush volume with only 8 cm depthDespite the minimal installation depth of 8 cm, Viega Mono Tec and Viega Mono Slim cisterns are convincing due to their maximum flushing volume of 9 litres. With the help of the dual volume flushing technology, there is a choice of a short flush, adjustable between 3 and 4 litres, and a full flush, infinitely adjustable between 6 and 9 litres. The factory settings are flush volumes of 3 and 6 litres for short and full flush respectively.

Bowden wire technology (2)With Bowden wire technology, Viega actuating panels can also be mounted on the 8 cm cistern. To enable this, the Bowden wire unit only has to be set to the 8 cm size: unlock the mechanism, push the unit together, re-lock the mecha-nism, and push the unit onto the drain valve.

1-piece inspection ductThe 1-piece inspection duct prevents dirt entering the cistern – not only during cladding, but also during the tiling work. The inspection duct is shortened accordingly for the assembly of the actuating panel.

Wall bushingA simple assembly from outside via the universal ½" female thread.

2

1

Page 8: Viega MonoSlim & MonoTec Brochure

Viega GmbH & Co. KG Plumbing and heating systems Viega Platz 1 DE-57439 Attendorn Germany

Phone +49 2722 61-1297 Fax +49 2722 61-1146

[email protected] www.viega.comIN

T 71

4 45

1-7/

13 ·

We

rese

rve

the

rig

ht t

o ef

fect

cha

nges

.