Viega ProPress Submittal Package

  • Published on
    06-Sep-2014

  • View
    112

  • Download
    13

Embed Size (px)

Transcript

Submittal PackageProPress SystemPotable Water Hydronic Heating Chilled Water Compressed Air Nitrogen N2 Argon Low Pressure Steam Fire Protection Vacuum Argomac - K (welding gas) Corgon Oxygen 02 (non medical)

Viega... The global leader in plumbing and heating systems.301 N. Main, 9th Floor Wichita, KS 67202 Ph: 800-976-9819 Fax: 800-976-9817 E-Mail: insidesales@viega.com www.viega.com SM-PP 0711 1 of 35

Submittal PackageSystem Data SheetSystem Description ProPress, ProPress XL and ProPress XLC are safe, reliable, and economical copper pipe installation systems that use modern cold press connection technology for a wide assortment of more than 500 fittings in dimensions ranging from 1/2" to 4". Tubing: K, L, and M hard copper tubing from 1/2" to 4" and soft copper tubing in 1/2" to 1-1/4" diameters. Applications All tubing must comply with the ASTM B88 standard. ProPress fittings are approved for installations in both above and below ground applications. Per code, local inspector approval must be obtained prior to installation below ground. Operating Parameters: Operating Pressure 200 PSI Max. Test Pressure 600 PSI Max. Low Pressure Steam 15 PSI Max. Vacuum 29.2" Mercury Max. @ 68F Operating Temperature 0F - 250F Approved Applications: Potable water Hydronic heating (w/ Glycol) Chilled water Compressed Air (200 PSI Max.) Non Medical Gases (140 PSI Max.) Fire Sprinkler (175 PSI Max.) Low Pressure Steam (15 PSI Max.) Vacuum (29.2" Mercury Max. @ 68F) System Benefits Fast and Easy to Use Flameless Permanent Connections Wide Capacity from 1/2" to 4" Large Selection of Fittings Consistent Professional Appearance Less Equipment Required Environmentally Friendly Connection System Versatility of Fittings and Tools for Variety of Applications Fittings Viega ProPress fittings are offered in 500+ configurations including: Elbows, Couplings, Reducers, Tees, Reducing Tees, Threaded Adapters, Unions, Caps, and Flanges. All threaded 1/2" - 2" fittings are bronze. ProPress and ProPress XLC fittings conform to California AB 1953, Vermont 193 and NSF 61 Annex G. Smart Connect (SC Feature) In ProPress 1/2" - 4" dimensions, the Smart Connect Feature assures leakage of liquids and/or gases from inside the system past the sealing element of an unpressed connection. The function of this feature is to provide the installer quick and easy identification of connections which have not been pressed prior to putting the system into operation.RIDGID Pressing Tools Model Volts Amps Weight (w/out jaw) 330C 120v 5.2A 9 lbs. 330B 14.4v Battery 27.2A 10 lbs. 210B 18v Battery 24A 6.4 lbs.

Approvals and Certificates NSF International www.nsf.org/business/search_listings/ index.asp#mname (enter Viega) IAPMO http://pld.iapmo.org/ (enter Viega) UL http://database.ul.com/cgi-bin/XYV/ template/LISEXT/1FRAME/gfilenbr.html (enterex6157) ABS (American Bureau of Shipping) http://www.eagle.org/typeapproval/ contents.html (enter Viega) CSA International http://www.csa-international.org/product/ (enter Viega) FM INTERNATIONAL APPROVALS Deutsch Verein des Gas-und Wasserfachese.V. (DVGW) Lloyds Register (LLOYDS) Det Norske Veritas (DNV) Registro Italiano Navale (RINA) Bureau Veritas (BV) KIWA Compliant with ICC International Plumbing Code UPC Uniform Plumbing Code PHCC National standard plumbing code Florida Building Code, Volume IIPlumbing Code NFPA 13,13D, and 13R Contact your local Viega or RIDGID representative for details on local approvals For more information on RIDGID products contact: Ridge Tool Company 400 Clark Street, Elyria, Ohio 44036 Demos, Literature: 800-769-7743 Technical inquiries: 800-519-3456 Availability: 888-743-4333 Web: www.ridgid.com

Tools RIDGID offers three pressing tools for connecting ProPress fittings. 330-C Corded Tool (1/2" to 4") 330-B Battery powered Tool (1/2" to 4") 210-B Battery powered Tool (1/2 to 1-1/4) 1/2" to 4" fittings are pressed in 4-7 sec. History ProPress has been used in Europe since the late 1980s and in the U.S. since the late 1990s for a variety of applications. Backed by two plumbing leaders with over 175 years of combined excellence. Warranty Viega ProPress products carry a 50-year warranty against defects in material and workmanship. The RIDGID Lifetime Warranty applies to tools, jaws and crimp rings from Ridge Tool Company.

Viega... The global leader in plumbing and heating systems.301 N. Main, 9th Floor Wichita, KS 67202 Ph: 800-976-9819 Fax: 800-976-9817 E-Mail: insidesales@viega.com www.viega.com SM-PP 0711 2 of 35

Submittal PackageViega LLC Limited Warranty Propress Fittings And ValvesSubject to the conditions and limitations in this Limited Warranty, Viega LLC (VIEGA) warrants to wholesalers and licensed plumbing and mechanical contractors in the United States and Canada that its PROPRESS fittings, when properly installed in non industrial and non marine applications and under normal conditions of use, will be free of failure from manufacturing defect for a period of fifty (50) years from date of installation and that its PROPRESS valves, when properly installed in non industrial and non marine applications and under normal conditions of use, will be free of failure from manufacturing defect for a period of two (2) years from date of installation. Under this Limited Warranty you only have a right to a remedy if the failure or leak resulted from a manufacturing defect in the products covered by this warranty and the failure or leak occurred during the warranty period. You do not have a remedy under this warranty and the warranty does not apply if the failure or any resulting damage is caused by (1) components other than those manufactured or sold by Viega; (2) not designing, installing, inspecting, or testing the ProPress fittings or valves in accordance with Viegas installation instructions in effect at the time of the installation; applicable code requirements; and accepted industry practice; (3) improper handling and protection of the product prior to and during installation, inadequate freeze protection, exposure to water pressures or temperatures or in applications outside acceptable operating conditions; (4) acts of nature such as, but not limited to, earthquakes, fire, flood, or lightning, or (5) external environmental causes, such as water quality variations, aggressive water, or other external chemical or physical conditions. In the event of a leak or other failure of the parts covered by this warranty, it is the responsibility of the property owner to obtain and pay for repairs. Only if the warranty applies will Viega be responsible for the remedy under this warranty. The part or parts which you claim failed should be kept and Viega contacted by writing to the address below or telephoning 1-877-843-4262 within thirty (30) days after the leak or other failure and identifying yourself as having a warranty claim. You should be prepared to ship, at your expense, the product which you failed due to a manufacturing defect and document the date of installation. Within a reasonable time after receiving the product, Viega will investigate the reasons for the failure, which includes the right to inspect the product at Viega. Viega will notify you in writing of the results of its review. In the event that Viega determines that the failure or leak was the result of a manufacturing defect in the part covered by this warranty and that this warranty applies, the EXCLUSIVE AND ONLY REMEDY under this warranty shall be the reimbursement for repair and/or replacement of the part. VIEGA SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OF OTHER DAMAGE (FOR EXAMPLE, WATER OR PROPERTY OR MOLD REMEDIATION) UNDER ANY LEGAL THEORY AND WHETHER ASSERTED BY DIRECT ACTION, FOR CONTRIBUTION OR INDEMNITY OR OTHERWISE. THE ABOVE WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. If a limited warranty shall be found to apply, such warranty is limited to four years. Other than this Limited Warranty, Viega does not authorize any person or firm to create for it any other obligation or liability in connection with its products. This Limited Warranty gives you specific legal rights and you also may have other rights which may vary from state to state. This warranty shall be interpreted and applied under the law of the state in which the product is installed and is intended as a Commercial Warranty. ProPress Warranty 0408Viega... The global leader in plumbing and heating systems.301 N. Main, 9th Floor Wichita, KS 67202 Ph: 800-976-9819 Fax: 800-976-9817 E-Mail: insidesales@viega.com www.viega.com SM-PP 0711 3 of 35

Submittal PackageProPress Dimensional DocumentationBronze Adapter P x M NPT Model 2911ZL Stock Code 79210 79215 79220 79225 79230 79235 79240 79245 79250 79255 79260 79265 79270 79275 79280 79285 79290 Size 1 2 1/2" x 3/8" NPT 1/2" x 1/2" NPT 1/2" x 3/4" NPT 3/4" x 1/2" NPT 3/4" x 3/4" NPT 3/4" x 1" NPT 1" x 3/4" NPT 1" x 1" NPT 1" x 1-1/4" NPT 1-1/4" x 1" NPT 1 1/4" x 1-1/4" NPT 1-1/4" x 1-1/2" NPT 1-1/2" x 1-1/4" NPT 1 1/2" x 1-1/2" NPT 1-1/2" x 2" NPT 2" x 1-1/2" NPT 2" x 2" NPT A (in) 0.768 1.024 1.004 1.024 1.024 1.181 1.181 1.260 1.535 1.220 1.339 1.476 1.339 1.339 1.654 1.535 1.496 L (in) 1.594 1.929 1.831 1.929 1.929 2.087 2.087 2.165 2.441 2.244 2.362 2.500 2.756 2.756 3.071 3.110 3.071

Bronze Adapter P x M NPT Model 2911 Stock Code 77812 77817 77822 77827 77832 22348 77837 77842 77847 77852 77857 77862 77867 77872 22343 22338 77877 Size 1 2 1/2" x 3/8" NPT 1/2" x 1/2" NPT 1/2" x 3/4" NPT 3/4" x 1/2" NPT 3/4" x 3/4" NPT 3/4" x 1" NPT 1" x 3/4" NPT 1" x 1" NPT 1" x 1-1/4" NPT 1-1/4" x 1" NPT 1-1/4" x 1-1/4" NPT 1-1/4" x 1-1/2" NPT 1-1/2" x 1-1/4" NPT 1-1/2" x 1-1/2" NPT 1-1/2" x 2" NPT 2" x 1-1/2" NPT 2" x 2" NPT A (in) 0.96 1.12 1.22 1.18 1.18 1.42 1.32 1.46 1.73 1.42 1.54 1.65 1.54 1.54 1.83 1.67 1.67 L (in) 1.713 1.870 1.969 2.087 2.087 2.323 2.224 2.362 2.638 2.441 2.559 2.677 2.953 2.953 3.248 3.248 3.248

Viega... The global leader in plumbing and heating systems.301 N. Main, 9th Floor Wichita, KS 67202 Ph: 800-976-9819 Fax: 800-976-9817 E-Mail: insidesales@viega.com www.viega.com SM-PP 0711 4 of 35

Submittal PackageAdapter P x F NPT Model 2912ZL Stock Code 79295 79300 79305 79315 79310 79320 79325 79330 79335 79345 79355 79350 79340 79360 79365 79370 Size 1 2 1/2" x 3/8" NPT 1/2" x 1/2" NPT 1/2" x 3/4" NPT 3/4" x 3/4" NPT 3/4" x 1/2" NPT 1" x 1/2" NPT 1" x 3/4" NPT 1" x 1" NPT 1" x 1-1/4" NPT 1-1/4" x 1" NPT 1-1/4" x 1-1/2" 1 1/4" x 1-1/4" NPT 1-1/4" x 1/2" NPT 1-1/2" x 1-1/4" NPT 1-1/2" x 1-1/2" NPT 2" x 2" NPT A (in) 0.185 0.252 0.272 0.350 0.331 0.331 0.390 0.441 0.500 0.244 0.421 0.343 0.370 0.264 0.343 0.406 L (in) 1.417 1.614 1.654 1.811 1.772 1.772 1.850 2.008 2.087 1.929 2.126 2.047 1.929 2.362 2.441 2.677

Bronze Adapter P x F NPT Model 2912 Stock Code 77887 77892 77897 77902 77907 14548 77912 77917 77922 22208 77927 77932 77937 77942 77947 77952 Size 1 2 1/2" x 3/8" NPT 1/2" x 1/2" NPT 1/2" x 3/4" NPT 3/4" x 1/2" NPT 3/4" x 3/4" NPT 1" x 1/2" NPT 1" x 3/4" NPT 1" x 1" NPT 1" x 1-1/4" NPT 1-1/4" x 1/2" NPT 1-1/4" x 1" NPT 1-1/4" x 1-1/4" NPT 1-1/4" x 1-1/2" NPT 1-1/2" x 1-1/4" NPT 1-1/2" x 1-1/2" NPT 2" x 2" NPT A (in) 0.224 0.291 0.394 0.331 0.394 0.252 0.394 0.480 0.539 0.374 0.205 0.382 0.461 0.382 0.382 0.445 L (in) 1.378 1.575 1.693 1.772 1.850 1.693 1.850 2.047 2.126 1.929 1.890 2.087 2.165 2.480 2.480 2.717

Viega... The global leader in plumbing and heating systems.301 N. Main, 9th Floor Wichita, KS 67202 Ph: 800-976-9819 Fax: 800-976-9817 E-Mail: insidesales@viega.com www.viega.com SM-PP 0711 5 of 35

Submittal PackageBronze Adapter FTG x M NPT Model 2911.1ZL Stock Code 79375 79380 79385 79390 79395 79400 79405 79410 79415 79420 Size 1 2 1/2" x 3/8" NPT 1/2" x 1/2" NPT 1/2" x 3/4" NPT 3/4" x 1/2" NPT 3/4" x 3/4" NPT 1" x 3/4" NPT 1" x 1" NPT 1-1/4" x 1-1/4" NPT 1-1/2" x 1-1/2" NPT 2" x 2" NPT L (in) 1.752 1.949 2.047 1.929 2.047 2.047 2.224 2.539 2.894 3.189

Bronze Adapter FTG x M NPT Model 2911.1 Stock Code 77957 77962 77967 77972 77977 14553 77982 77987 77992 77997 Size 1 2 1/2" x 3/8" NPT 1/2" x 1/2" NPT 1/2" x 3/4" NPT 3/4" x 1/2" NPT 3/4" x 3/4" NPT 1" x 3/4" NPT 1" x 1" NPT 1-1/4" x 1-1/4" NPT 1-1/2" x 1-1/2" NPT 2" x 2" NPT L (in) 1.732 1.969 2.047 2.028 2.146 2.146 2.362 2.657 2.051 3.543

Viega... The global leader in plumbing and heating systems.301 N. Main, 9th Floor Wichita, KS 67202 Ph: 800-976-9819 Fax: 800-976-9817 E-Mail: insidesales@viega.com www.viega.com SM-PP 0711 6 of 35

Submittal PackageAdapter FTG x F NPT Model 2912.1ZL Stock Code 79425 79430 79435 79440 79445 79455 79450 79460 79465 79470 79475 Size 1 2 1/2" x 3/8" NPT 1/2" x 1/2" NPT 1/2" x 3/4" NPT 3/4" x 1/2" NPT 3/4" x 3/4" NPT 1" x 1/2" NPT 1" x 1" NPT 1-1/4" x 1/2" NPT 1-1/4" x 1-1/4" NPT 1-1/2" x 1-1/2" NPT 2" x 2" NPT A (in) 1.130 1.217 1.276 1.256 1.276 1.453 1.327 1.650 1.504 1.878 2.118 L (in) 1.535 1.752 1.831 1.791 1.831 1.988 1.988 2.185 2.185 2.559 2.815

Bronze Adapter FTG x F NPT Model 2912.1 Stock Code 78002 78007 78012 78017 78022 22218 22213 78027 78032 78037 78042 Size 1 2 1/2" x 3/8" NPT 1/2" x 1/2" NPT 1/2" x 3/4" NPT 3/4" x 1/2" NPT 3/4" x 3/4" NPT 1" x 1/2" NPT 1-1/4" x 1/2" NPT 1" x 1" NPT 1-1/4" x 1-1/4" NPT 1-1/2" x 1-1/2" NPT 2" x 2" NPT A (in) 1.031 1.118 1.181 1.217 1.256 1.433 1.630 1.307 1.484 1.878 2.335 L (in) 1.437 1.654 1.732 1.752 1.811 1.969 2.165 1.969 2.165 2.559 3.031

Copper Coupling P x P with Stop Model 2915 Stock Code 78047 78052 78057 78062 78067 78072 Size 1 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" A (in) 0.118 0.197 0.157 0.138 0.138 0.138 L (in) 1.614 2.008 1.969 2.205 2.992 3.307

Copper Coupling P x P No Stop Model 2915.3 Stock Code 78172 78177 78182 78187 78192 78197 Size 1 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" L (in) 1.732 2.205 2.205 2.441 3.307 3.622

Viega... The global leader in plumbing and heating systems.301 N. Main, 9th Floor Wichita, KS 67202 Ph: 800-976-9819 Fax: 800-976-9817 E-Mail: insidesales@viega.com www.viega.com SM-PP 0711 7 of 35

Submittal PackageCopper Coupling P x P Extended No Stop Model 2915.5 Stock Code 79005 79010 79015 79020 79025 79030 Size 1 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" L (in) 2.953 3.346 3.740 4.134 4.724 5.315

Bronze Coupling P x P Extended No Stop Model 2915.6 Stock Code 78213 78218 78223 78228 78233 78238 Copper Cross-Over P x P Model 2928 Stock Code 77742 77747 Size 1 1/2" 3/4" A (in) 3.622 4.488 L (in) 5.118 6.339 H (in) 0.772 0.902 Size 1 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" L (in) 2.953 3.346 3.740 4.134 4.724 5.315

Copper Cross-Over FTG x P Close Rough Model 2927 Stock Code 78137 78142 Size 1 1/2" 3/4" A (in) 3.835 4.638 L (in) 4.583 5.543 H (in) 1.098 1.539

Copper Elbow 90 P x P Close Rough Model 2916 Stock Code 77317 77322 77327 77332 77337 77342 Size 1 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" A (in) 0.748 1.039 1.323...