Abstract – A Smart CCTV camera surveillance security system is proposed. The system is aimed to alleviate the disadvantages of the existing video surveillance kits and provides advanced search notification, visualization and alarming functionality through motion detection and tracking technology. The paper contains remedies of surveillance system. In this system uses different component like Passive Infra Red (PIR) sensor for motion detection and Infra Red (IR) sensor are used to track the position of object. This system works in two modes automatic and manual. in automatic mode When motion detected by the PIR sensor it gives the signal to controller at that time camera will on through the relay. If object changes position then the cameras track position of object as per the IR sensor signal. Camera move by using stepper motor and in manual mode camera move toward different object as per the requirement by using keypad accordingly by stepper motor. The zigbee are used to wireless transmission and reception of signal. The development in the communication system given rise to the wireless networks. The effectiveness and feasibility of the proposed concept is proven through experimental results on a real-life video sequence.

Keywords : Surveillance, PIR, IR, Stepper motor, Zigbee.

1. INTRODUCTION

The project “Smart CCTV camera surveillance system” is to enhance the CCTV camera based security systems, which presently exist in different places. The Project Smart CCTV camera Security System by using CCTV Camera is designed using wireless technology. The signal is transmitted wirelessly to buzzer and LED. The video signal is transmitted through wire. The primary aims of these systems are to provide an automatic interpretation of scenes and to understand and predict the actions and interactions of the observed objects based on the information acquired by sensors. ‘ The use of a surveillance system for image detection is becoming more important. An embedded surveillance system is frequently used in the home, office or factory for image processing of the surveillance system and also for traffic monitoring but this configuration requires a high performance core, which works against some advantages of embedded

systems, such as low power consumption and low cost. Some designs propose the use of different sensors to track the sequence of the human body movement.[6] Other researchers construct an external signal to trigger the embedded surveillance system by means of a PIR sensor, which is triggered when an intruder enters the monitoring area. The project basically consists of surveillance unit & control unit. This project will works in two modes: Manual mode & automatic mode. In automatic mode PIR sensor will detect person movement and will give signal to the microcontroller to start the CCTV camera by using Relay. IR sensor will track the person movement and give the signal to microcontroller [1]. Accordingly stepper motor will be actuated to rotate the CCTV assembly. & in manual mode we will use keypad for the movement of CCTV camera in manual mode.

Control unit consist of microcontroller, LCD to see the messages, buzzer & LED for indication, Keypad will be used in manual mode for the controlling movement of the CCTV camera.MAX 232 IC will be used for voltage conversion between RF module & microcontroller.. The main stages of processing in a Smart CCTV camera surveillance system are: moving object detection and, tracking, behavioral analysis and retrieval. The recent interest in surveillance in public, military and commercial scenarios is increasing the need to create and deploy intelligent or automated visual surveillance systems. In scenarios such as public transport, these systems can help monitor and store situations of interest involving the public, viewed both as individuals and as crowds. Current research in these automated visual surveillance systems tends to combine multiple disciplines such as those mentioned earlier with signal processing, telecommunications, management and socio-ethical studies. Nevertheless there tends to be a lack of contribution from the field of system engineering to the research. The growing research interest in this field is exemplified by the IEEE and IEE workshops and conferences on visual surveillance and special journal issues that focus solely on visual surveillance or in human motion analysis.[3,5] This paper surveys the work on automated surveillance system from the aspects of: image processing=computer vision algorithms which are currently used for visual surveillance.

SMART CCTV CAMERA SURVEILLANCE SECURITY SYSTEM

V.A.Waghmode1, V.S.Suralkar2, M.N.Pund3

Prof.R.V.Mankar1

Padmabhooshan Vasantdada Patil Institute of Technology, E&TC Department, Bavdhan, Pune, Pune University, India

(vilaswaghmode10@gmail.com,suralkar.vasant2@gmail.com,pund.mangesh@gmail.com,reema.dandale@gmail.

com)

Even though the main goal of this paper is to present a review of the work that has been done in surveillance systems, an outline of different mode 1) Manual mode. 2) Automatic mode Applications. The increasing demand for security by society leads to a growing need for surveillance activities in many environments.Lately, the demand for remote monitoring for safety and security purposes has received particular attention, especially in the following areas: Transport applications such as airports, railways, underground, and motorways to survey traffic. Public places such as banks, supermarkets, homes, department stores and parking lots, and remote surveillance in military applications.Recent events, including major terrorist attacks, have led toan increased demand for security in society. This in turn hasforced governments to make personal and asset security apriority in their policies. This has resulted in the deploymentof large CCTV systems.

1) WORKING IN MANUAL MODE In manual mode the use keypad for the movement of CCTV camera.

NO

YES

FIG1.1FLOW CHART OF MANUAL MODE

2] WORKING IN AUTOMATIC MODE In automatic mode PIR sensor will detect person movement and will give signal to the microcontroller to start the CCTV camera by using Relay. IR sensor will track the person movement and give the signal to micro controller. Accordingly stepper motor will be actuated to rotate the CCTV assembly.

NO

YES

.

NO

YES .

YES NO

START

NO STPPER MOVMENT

STEPPER MOTOR MOVMENT

CAPTURED VIDEO TRANSMITED

STOP

KEY PRESSED

START

CCT V CAMERA OFF

SIGNAL IS TRANSMITED

LED AND BUZZER ON

DIFFERENT IR DETECT POSITION

AS PER POSITION DETECTED STEPPER MOTOR MOVE TOWARD OBJECT

NEW OBJECT

MOTION

DETECTED

VIDEO TRANSMITION

OBJECT MOVE

STEPPER MOTOR IN STABLE STATE SSTATESTATE

CCTV CAMERA ON

FIG 2.1 FLOWCHART OF AUTOMATIC MODE

3. IMPROVED SCHEME In ordinary system number of cameras are required to

cover a large area and camera is continue in on condition

because of that camera damaging possibility is more. Memory

required to store the recording is maximum.

In this system the camera is ON only when the motion is detected. The camera is movable because of that large area is under surveillance. 4. RESSULT Which operation is done is display on the LCD.Which is the result of the project. When the system starts the name of the project display on LCD.1)”CCTV AUTOMATION SYSTEM”. Then it displays the mode of operation .2)”AUTO MODE “or “MANUAL MODE” It displays the status of camera the camera is OFF or ON. If the PIR sensor detect motion then message display on LCD is 3)”CAMERA IS TURN ON”.As per which IR sensor detect the position the message display as 4) “MOTION IS DETECTED AT POSITION 1” on LCD All the hardware working properly. If the motion is detected then camera is turn ON and the stepper motor moves the camera according to which IR sensor track the position of object. 5. CONCLUSIONThe Project “Smart CCTV camera Surveillance system” is designed using wireless technology. This project is basically design for providing a security in different areas like military, banks, and industries etc and also save the power, memory required for the CCTV and CCTV footage respectively.

6. REFRENCE

[1]Ying-Wen Bai, Li-Sih Shen and Zong-Han Li, Design and Implementation of an Embedded Home Surveillance System by Use of Multiple Ultrasonic Sensors Vol. 56, No. 1, FEBRUARY 2010[2] Anthony C Davies1) and Sergio A Velastin2), A Progress Review of

Intelligent CCTV Surveillance Systems, Paper for IDAACS’05 Workshop –

Sofia, September 2005

[3] ] 1 Akshada Deshmukh, 2 Harshalata Wadaskar, 3 Leena Zade, 4Neha Dhakate, 5 Preetee Karmor, Webcam Based Intelligent Surveillance System Research Inventy: International Journal Of Engineering And Science Vol.2, Issue 8 (March 2013), Pp 38-42Using Motion Detection Method[4] Tasleem Mandrupkar, Manisha Kumari, Rupali Mane,

Smart Video Security Surveillance with Mobile Remote Control2013, IJARCSSE | 352 Volume 3, Issue 3, March 2013 ISSN: 2277 128X [5] Chaitali S. Panchal, Mitul M. Patel, MOTION DETECTION ENHANCED WITH ALGORITHMS INWIRELESS SURVEILLANCE SYSTEM, IJAERS/Vol. I/ Issue III/April-June, 2012/268-269[6] M. Valera and S.A. Velasti

INTELLIGENT DISTRIBUTED SURVEILLANCE SYSTEMS

Intelligent distributed surveillance systems: a review[7] Ashwin S, Sathiya Sethuram A, Varun A, Vasanth PAMRITA School of Engineering, AMRITA VISHWA VIDAPEETHAM A J2ME-Based Wireless Automated Video Surveillance System Using Motion Detection Method,

[8]Wai Kit Wong,Joy How Hut,Chu Kiong Loo,Way Soong Lim, Thermal imaging based off-time swimming pool surveillance system, International journal of innovative computing, information and control,vol 9,number 3,march 2013,pp1293-1320.