10
PRODUCT WHITE PAPER P www.elitescreens.com EliteScreensInc.|EliteScreensEuropeGmbH|EliteScreensFranceS.A.S|EliteScreensIndia|EliteScreensChinaLtd.|EliteScreensTaiwanCorp. EliteScreensJapan|EliteScreensAustralia 1 VMAX Dual Series Section 1: Screen Design s 1.1 What is it? The VMAX Dual Series is an electric/motorized projection screen with alternating 16:9 and 2.35:1 aspect ratio options. This unique dual aspect ratio screen is compatible with all projectors and no anamorphic lens or projector with memory lens is required. The VMAX Dual is a Constant Image Width (CIW) screen which means the width stays the same on both formats. This allows for setting up your 16:9 image first, then simply bringing down the 235 screen with no additional projector adjustment required. 1.2 How does it work? The VMAX Dual Series utilizes twin MaxWhite (matte white) front projection materials. It is operated using a Radio Frequency (RF) remote control with independent 16:9 and 2.35:1 buttons to drop the required screen format. It also has a UP button to raise the screen when not in use. The VMAX Dual has two motors, one for each screen panel. The product includes a Radio Frequency remote control that can also be used as a 5-12 volt projector trigger which synchronizes to a projector’s power cycle and is programmed to drop the 16:9 screen. In addition, the VMAX Dual comes in a black case with a pair of L brackets for a wall installation. It can also be installed flushed to the ceiling using the top built-in brackets located on the left and right side ends. A standard 3-prong power cord is included for plug and play. Section 2: Control System 2.1 Radio Frequency (RF) remote control The radio frequency remote control does not require line of sight and has a wider range of operation. The remote has three buttons to operate the VMAX Dual. UP = Retracts screen / 2.35:1 = Drops the 2.35:1 screen / 16:9 = Drops the 16:9 screen 2.2 5-12 volt projector trigger cable The Radio Frequency remote works as a handheld remote control as well as providing a wireless signal to drop the VMAX Dual’s 16:9 screen when synced with a projector’s power cycle. The 3.5mm mono jack is connected to the radio frequency remote and the other end to the projector’s trigger port. The 16:9 screen drops when the projector is turned on and raises it once it has been turned off. 2.3 Motor Specifications Synchronous motor Output Current Output Speed Output Torque Voltage Power Frequency Noise level Insulation Class 0.35mA 16 rpm 17kg/cm AC110V 38 Watts 60 Hz 46db E

VMAX Dual Series - EliteScreenShop.com Dual Series Section 1: ... In addition, the VMAX Dual comes in a black case with a pair of L brackets for a wall installation

Embed Size (px)

Citation preview

PRODUCT WHITE PAPER P www.elitescreens.com

Elite Screens Inc. | Elite Screens Europe GmbH | Elite Screens France S.A.S | Elite Screens India | Elite Screens China Ltd. | Elite Screens Taiwan Corp. Elite Screens Japan | Elite Screens Australia

1

VMAX Dual Series

Section 1: Screen Design s 1.1 What is it?

The VMAX Dual Series is an electric/motorized projection screen with alternating 16:9 and 2.35:1 aspect ratio options. This unique dual aspect ratio screen is compatible with all projectors and no anamorphic lens or projector with memory lens is required. The VMAX Dual is a Constant Image Width (CIW) screen which means the width stays the same on both formats. This allows for setting up your 16:9 image first, then simply bringing down the 235 screen with no additional projector adjustment required.

1.2 How does it work? The VMAX Dual Series utilizes twin MaxWhite (matte white) front projection materials. It is operated using a Radio Frequency (RF) remote control with independent 16:9 and 2.35:1 buttons to drop the required screen format. It also has a UP button to raise the screen when not in use. The VMAX Dual has two motors, one for each screen panel. The product includes a Radio Frequency remote control that can also be used as a 5-12 volt projector trigger which synchronizes to a projector’s power cycle and is programmed to drop the 16:9 screen.

In addition, the VMAX Dual comes in a black case with a pair of L brackets for a wall installation. It can also be installed flushed to the ceiling using the top built-in brackets located on the left and right side ends. A standard 3-prong power cord is included for plug and play.

Section 2: Control System 2.1 Radio Frequency (RF) remote control

The radio frequency remote control does not require line of sight and has a wider range of operation. The remote has three buttons to operate the VMAX Dual.

UP = Retracts screen / 2.35:1 = Drops the 2.35:1 screen / 16:9 = Drops the 16:9 screen

2.2 5-12 volt projector trigger cable The Radio Frequency remote works as a handheld remote control as well as providing a wireless signal to drop the VMAX Dual’s 16:9 screen when synced with a projector’s power cycle. The 3.5mm mono jack is connected to the radio frequency remote and the other end to the projector’s trigger port. The 16:9 screen drops when the projector is turned on and raises it once it has been turned off.

2.3 Motor Specifications Synchronous motor

Output Current

Output Speed

Output Torque

Voltage Power Frequency Noise level

Insulation Class

0.35mA 16 rpm 17kg/cm AC110V 38 Watts 60 Hz 46db E

PRODUCT WHITE PAPER P www.elitescreens.com

Elite Screens Inc. | Elite Screens Europe GmbH | Elite Screens France S.A.S | Elite Screens India | Elite Screens China Ltd. | Elite Screens Taiwan Corp. Elite Screens Japan | Elite Screens Australia

2

Section 3: Product Features 3.1 Characteristics

Screen Material • MaxWhite 1.1 Gain matte white front projection surface

• Wide viewing angle with excellent diffusion uniformity • Standard black backing eliminates light penetration • 4-sided black masking borders on both 2.35:1 and 16:9 screens

• Active 3D and 4K Ultra HD Ready Control System

• Radio Frequency (RF) wireless remote control operation with separate 16:9 and 2.35:1 buttons to control each screen panel • Wireless 5-12 volt projector trigger enables (16:9 default) drop/rise operation to

synchronize with the projector’s power cycle • Alternating 16:9 (HDTV) and 2.35:1 (Cinemascope) projection materials

Design and Installation • Rectangular housing (case) is durable and moisture resistant • Wall or ceiling installation options

• Dual Motors, one for each screen panel • 12mm distance between screen materials negates depth of focus distortion

• Plug & play, no hardwire installation required Quality and Reliability

• Synchronous motor allows silent operation with extended operational longevity

• Low power consumption • 2-year warranty from defects in workmanship

• 3rd year warranty offered through ENR-G program (Education, Non-Profit, Religious, and Government/Military)

• GREENGUARD and GREENGUARD Gold Certified | UL 2818

3.2 Certifications

3.3 Model Numbers

Model Number Nominal Diagonal

Aspect Ratio

Viewing Height

(in)

Viewing Width

(in)

Screen Material

Gain Case Color

N.W. (lbs)

G.W. (lbs)

Packing Dims. (LxWxH)

VMAX100H95C 100” 16:9 49.0 87.1

MaxWhite 1.1 Black 47.0 63.0 107.9”x11”x8.7” 95” 2.35:1 37.1 87.1

VMAX120H114C 120” 16:9 58.8 104.6

MaxWhite 1.1 Black 56.0 74.6 126.4”x11.0”x8.7” 114” 2.35:1 44.0 104.6

PRODUCT WHITE PAPER P www.elitescreens.com

Elite Screens Inc. | Elite Screens Europe GmbH | Elite Screens France S.A.S | Elite Screens India | Elite Screens China Ltd. | Elite Screens Taiwan Corp. Elite Screens Japan | Elite Screens Australia

3

Section 4: Screen Material Specifications 4.1 Characteristics Matte White Front Projection Screen Material

MaxWhite is a screen material is the most versatile screen surface for front projection presentations. This material provides the widest possible viewing angle with perfect diffusion uniformity while giving precise definition, image color reproduction and black and white contrast. Screen surface has black-backing to avoid light penetration and can be cleaned safely with mild soap and water. Woven screen material is a, multi-layer, cross-array coated with a matte white reflective compound.

Features & Benefits • Gain: 1.1 • Viewing Angle: 180° • Surface can be cleaned with moist cotton cloth • Multi-Layer Weave and Textured Surface Coating • Mildew Resistance • Black backing eliminates light penetration • Active 3D and 4K Ultra HD Ready • GREENGUARD and GREENGUARD Gold Certified | UL 2818

Specifications

Thickness 0.41 mm (0.016”)

Weight 530 g/m2

Maximum Height 3.2 M (10 ft)

On-axis gain 1.1

Half-Gain Angle Does not reach half gain

4.2 Gain and Viewing Angle Chart

PRODUCT WHITE PAPER P www.elitescreens.com

Elite Screens Inc. | Elite Screens Europe GmbH | Elite Screens France S.A.S | Elite Screens India | Elite Screens China Ltd. | Elite Screens Taiwan Corp. Elite Screens Japan | Elite Screens Australia

4

Section 5: Execution 5.1 Submittals

User’s Guide

Pair of wall brackets with installation hardware

Radio Frequency remote with wireless 5-12 volt projector trigger capability

5.2 Preparation 1. Carefully unpack the screen. 2. Always handle the screen in the upright position as it would appear when installed and on a clean level

surface. 3. In order to protect the screen from staining or discoloration, keep the unit out of contact with direct

sunlight and foreign particles such as dust, sawdust and liquids.

5.3 Pre-Installation 1. Select the location for your screen within a reasonable projection angle along with access to a good

power source. 2. For an installation with the best weight tolerance, it is ideal to secure your screen into the studs of your

house’s internal framework. If studs are not available, consult an installation specialist.

Installation The VMAX Dual Series screen is designed for installation on a wall or ceiling. All hardware is included to allow a

wall installation. A professional installer is strongly recommended for safety purposes. Elite Screens is not liable

for any faulty installations.

A. Wall Installation 1. Measure the length distance (L)

between each hole on the screen’s end

flange as shown in the image above.

2. Measure and mark the required height

for your installation. Next, drill three

holes vertically 37mm apart for the 6 inch

wall brackets (E). Then, drill another hole

according to the measurement distance

obtained from Step 1. Finally, drill the

remaining two holes for the wall bracket.

3. Insert the hollow wall anchors (A) into

the drilled holes. Align the 6 inch wall

brackets (E) to the drilled holes and

secure with the screws (B).

4. After securing the 6 inch wall brackets

(E) to the wall, bring the screen over the

top of the brackets.

5. Align the screw holes from the screen’s

end flanges to the wall brackets top

opening.

6. Insert the M6x24mm screw & washer

and secure with the M6 nut (D).

WAL

L

L

WALL

L

L

WALL Woodscrew and

R18mmx6mm washer

37mm

Two or more people are

required to lift screen up.

PRODUCT WHITE PAPER P www.elitescreens.com

Elite Screens Inc. | Elite Screens Europe GmbH | Elite Screens France S.A.S | Elite Screens India | Elite Screens China Ltd. | Elite Screens Taiwan Corp. Elite Screens Japan | Elite Screens Australia

5

B. Ceiling Installation

1. Measure the (L) and (W) distance and mark the area on your ceiling. Those measurements are the holes

located at the end flanges of the VMAX Dual screen as shown in the drawing.

2. Drill four holes in the ceiling and insert the hollow wall anchors (A) in each of the drilled holes.

Two or more people are required for the next steps

3. Carefully bring up the screen and align the end flange holes of the screen with the two drilled holes in the

ceiling.

4. Insert the screw (B) in the hollow wall anchor (A) and fasten with a screw (B) to secure the screen in place.

Repeat procedure until screen is safely installed.

Hollow Wall

Anchor

Align the

holes

L

W

W

L

Screw (B) is inserted

into hollow anchor (A).

PRODUCT WHITE PAPER P www.elitescreens.com

Elite Screens Inc. | Elite Screens Europe GmbH | Elite Screens France S.A.S | Elite Screens India | Elite Screens China Ltd. | Elite Screens Taiwan Corp. Elite Screens Japan | Elite Screens Australia

6

Section 6: Product Specifications 6.1 Dimensions

VMAX Dual Series Dimensions Table

6.2 Drawings

The listed measurements are for general reference only. Please contact Elite Screens to verify product design and dimensions before attempting to integrate its products with any structural or furniture modification. Although a manufacturer may offer product advice, it may be taken or disregarded at the integrator’s discretion. Elite Screens will not be held responsible or be otherwise liable for faulty installations.

PRODUCT WHITE PAPER P www.elitescreens.com

Elite Screens Inc. | Elite Screens Europe GmbH | Elite Screens France S.A.S | Elite Screens India | Elite Screens China Ltd. | Elite Screens Taiwan Corp. Elite Screens Japan | Elite Screens Australia

7

6.3 Pictures Full Screen View (16:9)

Full Screen View (2.35:1

PRODUCT WHITE PAPER P www.elitescreens.com

Elite Screens Inc. | Elite Screens Europe GmbH | Elite Screens France S.A.S | Elite Screens India | Elite Screens China Ltd. | Elite Screens Taiwan Corp. Elite Screens Japan | Elite Screens Australia

8

Lifestyle

PRODUCT WHITE PAPER P www.elitescreens.com

Elite Screens Inc. | Elite Screens Europe GmbH | Elite Screens France S.A.S | Elite Screens India | Elite Screens China Ltd. | Elite Screens Taiwan Corp. Elite Screens Japan | Elite Screens Australia

9

VMAX Dual Close up of housing

Hardware Kit: L brackets and screws

Radio Frequency Remote and Wireless trigger cable

PRODUCT WHITE PAPER P www.elitescreens.com

Elite Screens Inc. | Elite Screens Europe GmbH | Elite Screens France S.A.S | Elite Screens India | Elite Screens China Ltd. | Elite Screens Taiwan Corp. Elite Screens Japan | Elite Screens Australia

10

Section 7: About Elite Screens

7.2 Company Description Elite Screens Inc. is a California based company that specializes in making quality commercial and home-theater

projection screens for the retail and custom install sales channels. Our company began as an innovative venture

into the projection market by manufacturing veterans from the AV/IT industry. Elite Screens quickly established

itself as an entry level commercial and home theater screen manufacturer. This was accomplished by making a

quality product cost effective with a focus on mass-producing screen material, sizes and aspect ratios that were

most commonly preferred by AV customers in general. We focused on uniformity with what would match the

mainstream demographic while including extra features that are not usually included by other manufacturers. In

time, we progressed from just retail sales into the realm of custom installer/integrator manufacture as our

numerous reviews and awards will attest. We stand behind our product and are so certain of customer satisfaction

with the quality of our product that we offer a 2-year manufacturer's warranty which is twice the industry

standard.

In our continued devotion to excellence in products and service, we are committed to implementing green

practices with our production. We have adopted manufacturing methods that promote conservative regulation of

our energy needs. Our simple product designs combined with the expertise of our permanent staff ensures that

our entire line of products are made by experienced hands devoted to the high standards of today’s audio-video

consumer.

###