Vogel - Inline Pumps - Pumps! That's what it's about · VOGEL Inline Pumps, Design LR / LMR & LRZ / LMZ, LER & LEZ Program Extension ... Capacities up to 500 m3/h (660 USgpm)

Vogel Pumpen

1

Vogel - Inline PumpsDesign LR / LMR & LRZ / LMZ, LER & LEZ

Vogel Pumpen

Vogel Pumpen

2

VOGEL Inline Pumps, Design LR / LMR & LRZ / LMZ

Performance:

Capacity up to 350 m3/h (1540 USgpm)Head up to 85 m (280 feet)Speed up to 2950 min-1 (2950 rpm)

Pump sizes:

DN 40 up to DN 150 (1 1/2” up to 6”) discharge,pumps with higher capacities,sizes DN 200 up to DN 300 (8” up to 12”),refer to design LER / LEZ, page 12.

Temperature of pumped liquid:

max. 140°C (284°F)

Casing pressure:

Design LR:up to 16 bar/120°C or 13 bar/140°CDesign LMR/LMZ:up to 16 bar/120°C or 13 bar/140°C

Liquids:

Clean and slightly contaminated fluids(without bigger solids)

Cold and hot waterCondensateWater-Glycol mixtures,etc.

Applications:

Water supply and water treatment

Cooling and hot water supply in industries andbuilding services

Filter systems, etc.

ngiseD edoC eziS rellepmI,gnisaC

rebmahclaeSsgnirraeW retpadarotoM tfahS

RLZRL

NV521-04

otpu061-08

4044.1

0206.0

2044.1

0206.0 1044.1NN 002-08

otpu052-001

0206.0)1

NS 10.0501.2

RMLZML

NN 521NDotpu051ND

5206.0

5206.0 )1 5206.0 1204.1

NS 10.0501.2

Design LR, LMR

Design LMZ

1) optional 0.6020 bzw. 0.6025

Materials:

Vogel Pumpen

3


Performance 2900 r.p.m., Design LR

Vogel Pumpen

4


Performance 1450 r.p.m., Design LR / LMR

Vogel Pumpen

5


Performance 2900 r.p.m., Design LRZ - Single operation

Vogel Pumpen

6


Performance 2900 r.p.m., Design LRZ - Parallel operation

Vogel Pumpen

7


Performance 1450 r.p.m., Design LRZ - Single operation

Vogel Pumpen

8


Performance 1450 r.p.m., Design LRZ - Parallel operation

Vogel Pumpen

9


Performance 1450 r.p.m., Design LMZ

Single operation

Parallel operation

Vogel Pumpen

10


Design features LR, LMR:

● Single stage volute casing pump in Inline design with direct mounted standard IEC NormMotor.

● Meet the requirements according to ISO 9908

● High efficiency enclosed impeller. Sizes 40-125 up to 80-160 standard made of stainless steel1.4404, stamped and laser welded. Sizes 80-200 up to 150-250 standard cast iron, optionalbronze.

● Casing in solid design. Suction and discharge Inline. Flanges DN 40 up to DN 150 standardPN 16.

● Seal chamber dimensioned according to EN 3096

● Large open conical seal chamber, selfventing with internal circulation for proper lubricationand cooling of the seal. Ribs in the seal chamber prevent the accumulation of air or gas in thearea of the seal faces and reduce wear caused by solids in the fluid.

● Shaft sealing by means of single, unbalanced mechanical seal according to EN 12756, designU, version k (former DIN 24 960, l1k).

● Standard mechanical seal materials: Carbon – Silicon Carbide (SiC) – EPDM (BQ1EGG), op-tional elastomers in FPM (Viton®) (BQ1VGG).As option also available in SiC – SiC – FPM (Viton®) (Q1Q1VGG).

● Solid motor adapter made of cast iron to connect directly standard IEC Norm Motors, designB5/V1.

● Pump shaft designed as stub shaft and completely made of stainless steel for a long lifetime,directly connected to the motor shaft.

Design LR Design LMR

Vogel Pumpen

11


Design features LRZ / LMZ:

● Single stage volute casing pump in Inline design with direct mounted standard IEC Motor.

● Operation and stand-by pump in a common casing with integrated automatic reversing flap.

● Drive unit (Impeller and motor) are identical and also identical with the single Inline pumpLMR.

● Other features identical with Series LMR.

Design LRZ

With stub shaft and standardized motor

Design LMZ

Close-coupled with special motor shaft extension

Vogel Pumpen

12

VOGEL Inline Pumps, Design LER / LEZ - Extension Program

Performance:

Capacity up to 1000 m3/h (4400 USgpm)Head up to 80 m (262 feet)Speed up to 2950 min-1 (2950 rpm)

Pump Sizes:

DN 100 up to DN 300 (4” up to 12”) discharge

Temperature of pumped liquid:

Max. 150 °C (302°F)

Casing pressure:

Design LER/LEZ: 10 bar/120°CDesign LERS: 16 bar/150°C

Liquids:

Clean and slightly contaminated fluids(without bigger solids)

Cold and hot water

Condensate

Water-Glycol mixtures, etc.

Applications:

Water supply and water treatment

Cooling and hot water supply in industries andbuilding services engineering

Filter systems, etc.Design LEZ

Design LER

Materials:

ngiseD eziS edoC rellepmI,gnisaC

rebmahclaeSsgnirraeW retpadarotoM tfahS

RELSREL

001NDotpu052ND

NN 0206.0 0206.0

tuohtiw 0206.0 0644.1

LN 0206.0 0407.0

003NDNL

0407.00206.0

LL 0407.0

ZEL521NDotpu052ND

NN0206.0

0206.0

LN 0407.0

Vogel Pumpen

13

Design Features LER / LEZ:

● Single stage volute casing pump in Inline design with direct mounted Motor with one motorand pump shaft.

● Design LER Single Inline Pump

● Design LERZ Twin-Inline Pump. Operation and stand-by pump in one common casing withintegrated automatic reversing flap.

● Meet the requirements according to ISO 9908

● High efficiency enclosed impeller. Standard made of cast iron, optional bronze.

● Casing in solid design. Suction and discharge Inline. Flanges PN 10, optional for Design LERS,PN 16.

Design LER Design LEZ

VOGEL Inline Pumps, Design LER / LEZ - Extension Program

Vogel Pumpen

14

VOGEL Inline Pumps - HYDROVAR®

Sensorless HYDROVAR® - Application examples

The sensorless control system is a new way tocontrol the pump speed!

The HYDROVAR-Sensorless System works without any external Sensors (pressure capacity)!

The controller works based on the measured power consumption curve over the capacity.

Power 1.1. up to 11 kW.

Vogel Pumpen

15

VOGEL Inline Pumps, Design LR / LMR & LRZ / LMZ, LER & LEZ

Program Extension

Volute Casing Pumps LN / L:

● Single Stage Volute Casing pump according toEN 733 / ISO 9908

● Sizes from DN 32 up to DN 150 (1 1/4“ up to 6“)

● Capacities up to 600 m3/h (2640 USgpm)

● Heads up to 100 m (328 feet)

Blockpumps LMN / LM:

● Horizontal single stage block pump with directmounted IEC-Norm Motor

● Sizes from DN 32 up to DN 150 (1 1/4“ up to 6“)



● Motor Sizes up to 55 kW (75 hp)

Volute Casing Pumps LS:

● Extension of the performance range ofmodel LN/L

● Horizontal Design according to ISO 5199

● Sizes from DN 125 up to DN 600 (5“ up to 24“)



Design L

Design LM

Design LS

Vogel Pumpen

16

Vogel Pumpen

Pumpenfabrik ERNST VOGEL GmbH

A-2000 StockerauErnst Vogel-Straße 2Telefon: ..43-2266-604Telefax: ..43-2266-65311E-Mail: [email protected]

www.vogel-pumpen.com

Liste 1160.1.B9/2007-e

Liability of manufacturer and/or supplierThe mentioned limits of operation and/or application are only a generalinformation and may not be applied for every case. The permitted rangeof operation and/or application for the specific case is to be obtainedfrom our acknowledgement of order and/or the instructions forinstallation, operation and maintenance, sent with the goods.

Documents

Vogel - Inline Pumps - Pumps! That's what it's about · VOGEL Inline Pumps, Design LR / LMR & LRZ / LMZ, LER & LEZ Program Extension ... Capacities up to 500 m3/h (660 USgpm)