WalzCraft 700 Series Mitered Stile & Rail Profiles

E.10.1V16.2.com

®® 99.7% American MadeC

• Due to the design of the Mitered Profiles (Fully Molded) in the section that follows, it is not an option to modify the width of the profile from what is shown or to modify the existing outside edge profile.

• The guideline shown to the right can be utilized as an aid when ordering Mitered Doors or Drawer Fronts with no additional outside edge option, using WalzCraft Order Forms.

(Note: The MP760-57 profile will be used in our example and shows how the information should be noted on your order form.)

• For the most current Order Forms, please visit our website at www.WalzCraft.com. If you do not have access to our website, please contact our Customer Support Team and order forms can be mailed to you.

• Non-Standard Part Sizes are not available. The top rail, bottom rail, left stile and right stile must all be the same profile and the same width.

• Some profiles in this section may accommodate a Recessed Applied Molding (RAM) rout to add an optional applied molding. For more information on Recessed Applied Moldings, please refer to page E.6.9.

Profile Info Stile & Rail or Miter Profile ______________ Panel Profile ______________ Outside Edge Profile ______________

MP760-57PR301-25

NA

MP700 Series - “Mitered” Mortise & Tenon Joinery Profile Options

MP760-76

MP760-57

MP760-38

MP1812

MP1813

MP1814

#2589

#2589

#819

Standard and True LiteMullion Stock

Center stile & center rail profiles look like this...

► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.

E

MP1813MP760-51

SW C SW C

SW C SW C

SW C SW C

SW C SW C

Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW

E.10.2V16.2

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com®® C

MP700 Series - “Mitered” Mortise & Tenon JoineryProfile Options

EMP701-76

MP701-57

MP701-38

MP1403

MP1404

MP1405

#2296

#2296

#819

Standard and TrueLite Mullion Stock


MP702-76

MP702-57

MP702-38

MP1417

MP2204

MP2199

#2760

#2760

#819




SW C SW C

SW C SW C

SW C SW C

SW C SW C

SW C SW C

SW C SW C


E.10.3V16.2.com


MP703-76

MP703-57

MP703-38

MP1406

MP1407

MP1408

#944

#944

#819



MP704-76

MP704-57

MP704-38*

MP1409

MP1409

MP1410*

#2472

#2472

#819



* Matching Mullion Stock isnot available with the

MP704-38 and MP1410.


Profile Options MP700 Series - “Mitered” Mortise & Tenon Joinery

E

SW C SW C

SW C SW C

SW C SW C

SW C

SW C

SW C

SW C

SW C SW C


E.10.4V16.2


MP705-76

MP705-57

MP705-38

MP1411

MP1412

MP1413

#914

#914

#819



MP708-76

MP708-57

MP708-38

MP1423

MP1424

MP1425

#939

#939

#819





E

SW C SW C

SW C SW C

SW C SW C

SW SW

SW SW

SW SW

SW


E.10.5V16.2.com


MP709-76

MP709-57

MP709-38*

MP1426

MP1427

MP1410*

#2472

#2472

#819



MP710-76

MP710-57

MP710-38

MP1428

MP1429

MP1430

#1114

#1114

#819



* Matching Mullion Stockis not available with theMP709-38 and MP1410.



E

SW C SW C

SW C SW C

SW C SW C

SW SW

SW

SW SW

SW


E.10.6V16.2


MP715-76

MP715-57

MP715-38

MP1442

MP1443

MP1444

#2437

#2437

#819



MP716-76

MP716-57

MP716-38

MP1445

MP1446

MP1447

#949

#949

#819





E

SW C SW C

SW C SW C

SW C SW C

SW SW

SW SW

SW

SW


E.10.7V16.2.com


MP717-76

MP717-57

MP717-38

MP1448

MP1449

MP1450

#930

#930

#819



MP718-76

MP718-57

MP718-38

MP1451

MP1452

MP1453

#1873

#1873

#819





E

SW C SW C

SW C SW C

SW C SW C

SW

SW

SW

SW

SW SW


E.10.8V16.2


MP719-76

MP719-57

MP719-38

MP1454

MP1455

MP1456

#948

#948

#819



MP720-76

MP720-57

MP720-38

MP1406

MP1407

MP1408

#944

#944

#819





E

SW SW

SW SW

SW SW

SW SW

SW SW

SW SW

SW


E.10.9V16.2.com


MP722-76

MP722-57

MP722-38

MP1460

MP1460

MP1461


Matching

Mullion

Stock is not

available for

any of these

profiles.



E

SW

SW

SW

SW

SW SW


E.10.10V16.2


MP723-76

MP723-57

MP723-38

MP1460

MP1460

MP1461


MP733-76

MP733-57

MP733-38*

MP1409

MP1409

MP1410*

#2472

#2472

#819



Matching

Mullion

Stock is not

available for

any of these

profiles.

* Matching Mullion Stock isnot available with the

MP733-38 and MP1410.



E

SW C SW C

SW C SW C

SW C SW C

SW SW

SW SW

SW SW


E.10.11V16.2.com


MP734-76

MP734-57

MP734-38

MP1486

MP1487

MP1488

#1179

#1179

#819



MP735-76

MP735-57

MP735-38

MP1489

MP1490

MP2203

#1164

#1164

#819



* When ordering LP105, LP111, LP112, LP114, LP125, LP130 & LP132 Lite Patterns; #2557 Mullion Stock molding must be used.



E

SW C SW C

SW C SW C

SW C SW C

SW SW

SW SW

SW SW


E.10.12V16.2


MP738-76

MP738-57

MP738-38

MP1406

MP1407

MP1408

#944

#944

#819



MP740-76

MP740-57

MP740-38

MP1501

MP1502

MP1503

#1644

#1644

#819





E

SW C SW C

SW C SW C

SW C SW C

SW

SW SW

SW

SW SW


E.10.13V16.2.com


MP742-76

MP742-57

MP742-38

MP1486

MP1487

MP1488

#2611

#2611

#819



MP744-76

MP744-57

MP744-38

MP1509

MP2205

MP2205

#2552

#2552

#819


Center stile & center rail profiles look like this...Corner block molding is recommended with beaded and rope moldings wherethey meet at the corners to prevent mis-match that may occur. See page E.7.1.

Molding is NOT included with this profile family and must be ordered separately.

#1008

#1008

#1008

#1008 #1008

#1008

#1008



E

SW C

SW C

SW C

SW C

SW C SW C

SW C

SW C

SW C

SW C

SW C

SW C


E.10.14V16.2


MP751-76

MP751-57

MP751-38

MP1667

MP1668

MP1669


MP754-76

MP754-57

MP754-38

MP1428

MP1429

MP1430

#1114

#1114

#819



Matching

Mullion

Stock is not

available for

any of these

profiles.



E

SW C SW C

SW C SW C

SW C SW C

SW SW

SW SW

SW SW


E.10.15V16.2.com


Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Applied Molding Shelf, molding is optional. X

MP759-76

MP759-57

MP759-38

MP1795

MP1796

MP2206

#1776

#1776

#819



MP761-76

MP761-57

MP761-38

MP1812

MP1813

MP1814

#2589

#2589

#819





EX

X

X

SW C SW C

SW C SW C

SW C SW C

SW

SW

SW

SW

SW SW

E.10.16V16.2


MP762-76

MP762-57

MP762-38

MP1812

MP1813

MP1814

#2589

#2589

#819



MP763-76

MP763-57

MP763-38

MP1812

MP1823

MP1823

#2589

#2589

#819


Center stile & center rail profiles look like this...Corner block molding is recommended with beaded and rope moldings wherethey meet at the corners to prevent mis-match that may occur. See page E.7.1.

Molding is NOT included with this profile family and must be ordered separately.

#1107

#1107

#1107

#1107 #1107

#1107

#1107



E

SW C SW C

SW C SW C

SW C SW C

SW SW

SW SW

SW SW


E.10.17V16.2.com


MP764-76

MP764-57

MP764-38

MP1838

MP1839

MP1840

#1841

#1841

#819



MP765-76

MP765-57

MP765-38

MP1867

MP1868

MP1869

#1866

#1866

#819





E

SW

SW

SW

SW

SW SW

SW SW

SW SW

SW SW


E.10.18V16.2


Due to the construction of this Mitered Profile Family, there are no

options for a center stile or center rail when ordering the MP767-38.

MP766-76

MP766-57

MP766-38

MP1877

MP1877

MP1878

#1879

#1879

#819



MP767-76

MP767-57

MP767-38

MP2195

MP2196

#1911

#1911

#819





E

SW SW

SW SW

SW SW

SW SW

SW SW

SW


E.10.19V16.2.com


MP769-76

MP769-57

MP769-38

MP2096

MP2097

MP2098

#2099

#2099

#819



MP770-76

MP770-57

MP770-38

MP2104

MP2106

MP2107

#1644

#1644

#819





E

SW

SW

SW

SW

SW SW

SW

SW

SW

SW

SW SW


E.10.20V16.2


MP771-76

MP771-57

MP771-38

MP2104

MP2106

MP2107

#1644

#1644

#819



MP772-76

MP772-57

MP772-38

MP2216

MP2217

MP2218

#2219

#2219

#1171





E

6.9mm

SW SW

SW SW

SW SW

SW SW

SW SW

SW SW


E.10.21V16.2.com


MP773-76

MP773-57

MP773-38

MP1838

MP1839

MP1840

#1841

#1841

#819



MP774-76

MP774-57

MP774-38

MP2320

MP2321

MP2322

#2324

#2324

#819





E

SW SW

SW SW

SW SW

SW SW

SW

SW

SW

SW


E.10.22V16.2


MP775-76

MP775-57

MP775-38

MP2385

MP2385

MP2386

#2384

#2384

#819



MP776-76

MP776-57

MP776-38

MP2519

MP2520

MP2521

#2514

#2514

#819





E

SW C SW C

SW C SW C

SW C SW C

SW SW

SWSW

SW SW


E.10.23V16.2.com




MP777-76

MP777-57

MP777-38

MP2553

MP2554

MP2555

#814

#814

#819



E

SW SW

SW SW

SW SW


E.10.24V16.2




E


MP779-57

MP779-38

#2325

#2325

#1172

MP779-76 MP2326

MP2326

MP2327

MP779-114 MP779-114uses MP2326

Must be ordered at 1" thick. Add 30% for 1" thickness.


SW

SW SW

SW SW

SWSW


E.10.25V16.2.com

®® 99.7% American MadeC► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.


E


Standard and TrueLiteMullion Stock

MP780-57

MP780-38

#1807

#1807

#819

MP780-76 MP2674

MP2675

MP2676


MP781-57

MP781-38

#814

#814

#819

MP781-76 MP2681

MP2682

MP2683


SW

SW

SW

SW

SW SW

SW SW

SW SW

SW SW


E.10.26V16.2



E


MP782-57

MP782-38

MP782-76 MP2872

MP2873

MP2873


Matching

Mullion

Stock is not

available for

any of these

profiles.

SW SW

SW SW


SW SW

E.10.27V16.2.com


Profiles OptionsMP700 Series - “Mitered” Mortise & Tenon Joinery

E



MP783-64

MP783-57

MP783-76 MP3049

MP3049

MP3050

SW SW

SW SW

SW SW

MP783-38

SW

MP3051

SW


#2798

#2798

#819

E.10.28V16.2



E


Ordering & Pricing Notes: MP700 Series Miter Door & Drawer Front Profiles Ordering Guidelines

1 Order Forms Applicable order forms will include spaces to indicate your chosen profiles.Pricing

1 Pricing Please see Section E.10 of the Wholesale Pricing Catalog.

Technical Notes: MP700 Series Miter Door & Drawer Front Profiles Cabinet Door & Drawer Front Options (Chapter B)

1 Mitered Frame or Mullion Doors

All of the mitered profiles shown in this catalog are also available with the GRF profile. When ordering, please indicate whether the door is a frame or mullion. If a mullion, please indicate the number of lites. Not all mitered profiles are available with mullions.

2 Complex LitePatterns

The following mullion lite patterns are considered complex and require an alternative mullion molding be used with certain stile & rail profiles: LP105, LP111, LP112, LP114, LP125, LP130, LP132, LP142, LP151 (see Section B.12).The following stile & rail profiles would require use of the alternative mullion molding when paired with the afore mentioned complex lite patterns: MP735.• MP735 / #1164 uses #2557.

Design Options (Chapter G)

1 “Mitered” Stile and Rail Stock (Part #SRP100)

“Mitered” Stile & Rail stock is produced and priced the same as “Traditional” Stile & Rail stock with an outside edge. Available in 8' [2438.4mm], Random Length and Cut to Length sizes. See Section G.15 for additional information and pricing guidelines. To order please use E•Z Order Form #5 - Moldings & Miscellaneous and Part #SRP100.

Functional Options (Chapter F)

1 1½" [38.1mm] Wide Miter Profiles Hinge boring is not available for any of the 1½" [38.1mm] wide miter profiles.

Miscellaneous

1 Center Stile and RailConstruction

All center stiles & rails will be haunched into the outside stiles & rails creating a mitered joint where they are conjoined, except MP1460 & MP1461. A butt joint is used to install these center stiles & rails.

Sizes / Dimensions1 Profile Drawings All Stile & Rail and Mullion Stock drawings are to scale.2 Thickness Available in ¾" [19.1mm] and 1" [25.4mm] thickness, unless otherwise noted.

3 Minimum SizesAll mitered door and drawer front minimum sizes are calculated based on 2¼" [57.2mm] wide profiles. • If using a 3" [76.2mm] wide profile, please add 1½" [38.1mm] to the published minimum door size. • If using a 1½" [38.1mm] wide profile, deduct 1½" [38.1mm] from the published minimum size.

Profile Options (Chapter E)1 MP744, MP763 Families Designed to accept Applied Molding #1008, #1107. Applied molding must be ordered separately.

2 MP772 FamilyFor use with these Solid Wood Panel Profiles: PR318-25, PR319-10, PR320-25, PR320-32, PR320-44, PR321-32, RVSCP-PR324, PR328-32, PR329-19 or a ¼" [6.4mm] veneer flat panel, to be recessed below the face of stiles and rails. Not compatible with any other Solid Wood Panel Profiles.

Material Options1 Material Options = Profile is available on products made from solid wood.SW

Documents

WalzCraft 700 Series Mitered Stile & Rail Profiles