Warren MI Preventative Water Heater Repair Tips

These water heater maintenance tips will help

ensure ones water heater is running properly, prolong the life of the water heater, and make

sure it doesn't blow up!

Brought to you byWater Heater Repair Warren MI

Vents

Depending on the type of water heater, the vents need to be routed a specific direction and

need to be the same diameter as the draft diverter. Check to make sure they are intack

and are not wearing out. Backdrafting of dangerous fumes could occur is so.

T & P Valve

It should be checked once a year. Water should flow freely when lifted and stop when

the handle is let go of. They can wear out but are important for they make sure the water

heater does not blow up!

Anode Rod

They will deteriorate over time. Most are aluminum but magnesium ones are safer for health reasons. Consider using magnesium

when it is time to replace them.

Thermostat

Many people suggest turning the temperature setting down to 120 degrees or lower to save money, which is does. However, legionella

bacteria can grow at 120 degrees, so a setting of between 120 and 130 is ideal.

Drain Valve

When draining the water heater tank once a year (hopefully this is a habit for you), make

sure the vavle opens easily. If the tank is not drained, the sediment that develops inside will

make for a noisey water heater eventually.

Combustion Air Openings

It is important to keep the area underneath and around the water heater tank clean and swept. Air is sucked in from the bottom of the tank and

can cause drafting issues if the burner is not burning properly due to debris entering the air

openings.http://warrenmi.hotwaterheatermedic.com/