WET ROTOR CIRCULATORSDPH - DMH - BPH - BMH WET ROTOR CIRCULATORS TECHNICAL DATA - SINGLE WITH OVAL FLANGES HEATING AND AIR CONDITIONING SYSTEMS Pump for circulating hot water in small

DAB PUMPS reserves the right to make modifications without notice

CIRC

ULAT

ORS

AND

IN-L

INE

PUM

PS

DPH - DMH - BPH - BMHWET ROTOR CIRCULATORS

TECHNICAL DATA - SINGLE WITH OVAL FLANGES

HEATING AND AIR CONDITIONING SYSTEMS

Pump for circulating hot water in small closed and pressurised or open tank civil and industrial community heating systems. Cast iron body and wet rotor motor. Die-cast aluminium motor casing. Flanged inlet and delivery mouths, fitted with threaded unions for pressure gauges. Technopolymer impeller, tempered stainless steel driving shaft. Stainless steel protective rotor sleeve and stator sleeve. Four pole asynchronous motor for the BMH and DMH versions, two pole motor for the BPH and DPH versions. The Single-phase circulator has been designed to work at three speeds - 230V, while the Three-phase circulator has been designed to work at two speeds - 230 V and at three speeds - 400 V. Thermal overload protection incorporated in the single-phase version. For the three-phase version the motor must be connected to the power supply through an external contactor. An automatic clapet type valve is incorporated into the delivery mouth of the twin version in order to prevent water from recirculating while the unit is not working; a blank flange is also supplied

standard if one of the two motors must be serviced.Protection level: IP 44 three-phase - IP42 single-phase.Operating range: from 1.5 to 78 m3/h with head up to 18 metres.Liquid temperature range: for three-phase version: from -10°C to +120°C (for the models BPH-DPH 150/340.65 T and BPH-DPH 150/360.80 T; BPH-DPH 150-180/280.50 T; BPH-DPH 180/340.65 T; BPH-DPH 180/360.80 T: from -10°C to +110°C). For single-phase version: from -10°C to +110°C.Characteristics of pumped liquid: clean, free from solids and mineral oils, non viscous, chemically neutral, close to the characteristics of water (max. glycol 30%).Maximum operating pressure: 10 bar (1000 kPa).Standard flanging: DN 40, DN 50, DN 65, DN 80 in PN 6/PN 10 (4 holes).Flanging on request: DN 80 in PN 10/PN 16 (8 holes).Installation: with MOTOR AXIS HORIZONTAL.Cable grommet: PG 11.

MODEL CODE

BMH 30/250.40T 505900622

BPH 60/250.40M 505904002

BPH 60/250.40T 505904622

BPH 120/250.40M 505907002

BPH 120/250.40T 505907622

BMH 30/280.50T 505920622

BMH 60/280.50T 505923622

BPH 60/280.50M 505924002

BPH 60/280.50T 505924622

BPH 120/280.50M 505927002

DPH/DMH

BPH/BMH

BMH 1400 1/min.BPH 2800 1/min.

CENTREDISTANCE

mm

PUMPCOUPLINGS

ELECTRICAL DATAMINIMUM

HEADPRESSURE

VOLTAGE50 Hz SPEED n r.p.pm.

1/minP1 MAX

WInA

250 DN 403 x 230 V ~ 2

113401260

10088

0,480,39 t° 75°C 90°C 110°C 120°C

m.t. 0,9 4 – 183 x 400 V ~321

144014301260

19215588

0,780,580,23

250 DN 40 1x230 V ~321

283027502410

316309292

1,431,531,51

t° 75°C 90°C 110°C 120°C m.t. 1,6 4 14 -

250 DN 403 x 230 V ~ 2

125702420

253229

0,810,72 t° 75°C 90°C 110°C 120°C

m.t. 1,6 4 - 193 x 400 V ~321

285028102430

348316232

0,990,750,72

250 DN 40 1x230 V ~321

265023201520

510498376

2,242,351,96

t° 75°C 90°C 110°C 120°C m.t. 6 9 18 -

250 DN 403 x 230 V ~ 2

123002070

395340

1,21,07 t° 75°C 90°C 110°C 120°C

m.t. 6 9 – 233 x 400 V ~321

278027102080

536499339

1,160,980,62

280 DN 503 x 230 V ~ 2

113901340

148134

0,70,55 t° 75°C 90°C 110°C 120°C

m.t. 0,9 4 – 183 x 400 V ~321

146014501350

255216131

1,120,830,32

280 DN 503 x 230 V ~ 2

112101120

272240

0,940,8 t° 75°C 90°C 110°C 120°C

m.t. 4 7,5 – 213 x 400 V ~321

140013601130

410367235

1,20950,46

280 DN 50 1x230 V ~321

284027302200

595540506

2,792,452,58

t° 75°C 90°C 110°C 120°C m.t. 1,6 6 14 -

280 DN 503 x 230 V ~ 2

126702570

464432

1,351,23 t° 75°C 90°C 110°C 120°C

m.t. 1,6 6 – 193 x 400 V ~321

289028602570

589546423

1,310,1

0,71

280 DN 50 1x230 V ~321

269023601340

870800590

3,973,693,12

t° 75°C 90°C 110°C 120°C m.t. 2 5 – 20


CIRC

ULAT

ORS

AND

IN-L

INE

PUM

PS

MODEL CODE

BPH 120/280.50T 505927622

BPH 150/280.50T 505928622

BPH 180/280.50T 505929622

BMH 30/340.65T 505940622

BMH 60/340.65T 505943622

BPH 60/340.65M 505944002

BPH 60/340.65T 505944622

BPH 120/340.65T 505947622

BPH 150/340.65T 505948622

BPH 180/340.65T 505949622

BMH 30/360.80T 505960122

BMH 60/360.80T 505963122

BPH 120/360.80T 505967122

BPH 150/360.80T 505968122

BPH 180/360.80T 505969122


The electric data refer to one motor.

CENTREDISTANCE

mm

PUMPCOUPLINGS


HEADPRESSURE


1/minP1 MAX

WInA

280 DN 50

3x230 V ~ 21

24302240

683605

1,951,75 t° 75°C 90°C 110°C 120°C

m.t. 2 5 – 203x400 V ~321

281027402260

898840603

1,671,47

1

280 DN 50

3x230 V ~ 21

25532420

11301032

3,223 t° 75°C 90°C 110°C 120°C

m.t. 2 5 – 203x400 V ~321

285028022425

147013601030

2,92,51,7

280 DN 50

3x230 V ~ 21

25202340

12301120

3,53,2 t° 75°C 90°C 110°C 120°C

m.t. 2 5 – 203x400 V ~321

283027802360

163015401130

32,701,85

340 DN65

3x230 V ~ 21

13601310

170154

0,730,60 t° 75°C 90°C 110°C 120°C

m.t. 4 7,5 – 213x400 V ~321

145014301310

270233150

1,120,840,35

340 DN65

3x230 V ~ 21

11701070

295257

10,85 t° 75°C 90°C 110°C 120°C

m.t. 4 7,5 – 213x400 V ~321

138013501090

445403255

1,20,970,49

340 DN65 1x230 V ~321

278025801460

735685564

3,373,133,12

t° 75°C 90°C 110°C 120°C m.t. 1 4 13 -

340 DN65

3x230 V ~ 21

25502380

582532

1,671,53 t° 75°C 90°C 110°C 120°C

m.t. 1 4 - 183x400 V ~321

285028002400

756705535

1,51,30,9

340 DN65

3x230 V ~ 21

26302500

1001940

2,852,66 t° 75°C 90°C 110°C 120°C

m.t. 6 9 – 223x400 V ~321

288028302520

12751200934

2,642,251,52

340 DN65

3x230 V ~ 21

24102250

13451188

3,83,36 t° 75°C 90°C 110°C 120°C

m.t. 7 11 18 -3x400 V ~321

280027302250

179616901210

3,252,93

2

340 DN65

3x230 V ~ 21

23302100

17301570

4,854,5 t° 75°C 90°C 110°C 120°C

m.t. 7 11 18 -3x400 V ~321

276026802150

276023301560

4,23,82,5

360 DN80

3x230 V ~ 21

11001010

313268

1,050,88 t° 75°C 90°C 110°C 120°C

m.t. 4 7,5 - 213x400 V ~321

137013301030

484437266

1,231

0,51

360 DN80

3x230 V ~ 21

11801100

535465

1,821,55 t° 75°C 90°C 110°C 120°C

m.t. 2 5 – 203x400 V ~321

139013501100

763663465

2,041,650,89

360 DN80

3x230 V ~ 21

25002340

14101292

3,953,6 t° 75°C 90°C 110°C 120°C

m.t. 6 10 – 223x400 V ~321

283027802350

182017101302

3,32,932,13

360 DN80

3x230 V ~ 21

21401900

19841695

5,624,82 t° 75°C 90°C 110°C 120°C

m.t. 7 11 18 -3x400 V ~321

271026101940

287026861710

4,644,322,85

360 DN80

3x230 V ~ 21

23802170

16701490

4,74,25 t° 75°C 90°C 110°C 120°C

m.t. 7 11 18 -3x400 V ~321

278027002200

231022101490

43,52,4


CIRC

ULAT

ORS

AND

IN-L

INE

PUM

PS

TECHNICAL DATA - TWIN WITH OVAL FLANGES

MODEL CODE

DMH 30/250.40 T 505910622

DPH 60/250.40 M 505914002

DPH 60/250.40 T 505914622

DPH 120/250.40 M 505917002

DPH 120/250.40 T 505917622

DMH 30/280.50 T 505930622

DMH 60/280.50 T 505933622

DPH 60/280.50 M 505934002

DPH 60/280.50 T 505934622

DPH 120/280.50 M 505937002

DPH 120/280.50 T 505937622

DPH 150/280.50T 505938622

DPH 180/280.50T 505939622

DMH 30/340.65 T 505950622

DMH 60/340.65 T 505953622

DPH 60/340.65 M 505954002

DPH 60/340.65 T 505954622


DMH 1400 1/min.DPH 2800 1/min.

The electric data refer to one motor.

CENTREDISTANCE

mm

PUMPCOUPLINGS


HEADPRESSURE


1/minP1 MAX

WInA

250 DN 403 x 230 V ~ 2

113401260

10088

0,480,39 t° 75°C 90°C 110°C 120°C

m.t. 0,9 4 – 183 x 400 V ~321

144014301260

19215588

0,780,580,23

250 DN 40 1x230 V ~321

283027502410

316309292

1,431,531,51

t° 75°C 90°C 110°C 120°C m.t. 1,6 4 14 -

250 DN 403 x 230 V ~ 2

125702420

253229

0,810,72 t° 75°C 90°C 110°C 120°C

m.t. 1,6 4 - 193 x 400 V ~321

285028102430

348316232

0,990,750,72

250 DN 40 1x230 V ~321

265023201520

510498376

2,242,351,96

t° 75°C 90°C 110°C 120°C m.t. 6 9 18 -

250 DN 403 x 230 V ~ 2

123002070

395340

1,21,07 t° 75°C 90°C 110°C 120°C

m.t. 6 9 – 233 x 400 V ~321

278027102080

536499339

1,160,980,62

280 DN 503 x 230 V ~ 2

113901340

148134

0,70,55 t° 75°C 90°C 110°C 120°C

m.t. 0,9 4 – 183 x 400 V ~321

146014501350

255216131

1,120,830,32

280 DN 503 x 230 V ~ 2

112101120

272240

0,940,8 t° 75°C 90°C 110°C 120°C

m.t. 4 7,5 – 213 x 400 V ~321

140013601130

410367235

1,20950,46

280 DN 50 1x230 V ~321

284027302200

595540506

2,792,452,58

t° 75°C 90°C 110°C 120°C m.t. 1,6 6 14 -

280 DN 503 x 230 V ~ 2

126702570

464432

1,351,23 t° 75°C 90°C 110°C 120°C

m.t. 1,6 6 – 193 x 400 V ~321

289028602570

589546423

1,310,10,71

280 DN 50 1x230 V ~321

269023601340

870800590

3,973,693,12

t° 75°C 90°C 110°C 120°C m.t. 2 5 – 20

280 DN 503x230 V ~ 2

124302240

683605

1,951,75 t° 75°C 90°C 110°C 120°C

m.t. 2 5 – 203x400 V ~32 1

28102740 2260

898840603

1,671,47

1

280 DN 503x230 V ~ 2

125532420

11301032

3,223 t° 75°C 90°C 110°C 120°C

m.t. 2 5 – 203x400 V ~32 1

28502802 2425

14701360 1030

2,92,5 1,7

280 DN 503x230 V ~ 2

125202340

12301120

3,53,2 t° 75°C 90°C 110°C 120°C

m.t. 2 5 – 203x400 V ~

32 1

28302780 2360

16301540 1130

32,70 1,85

340 DN653x230 V ~ 2

113601310

170154

0,730,60 t° 75°C 90°C 110°C 120°C

m.t. 4 7,5 – 213x400 V ~

32 1

14501430 1310

270233 150

1,120,84 0,35

340 DN653x230 V ~ 2

111701070

295257

10,85 t° 75°C 90°C 110°C 120°C

m.t. 4 7,5 – 213x400 V ~

32 1

13801350 1090

445403 255

1,20,97 0,49

340 DN65 1x230 V ~32 1

278025801460

735685564

3,373,133,12

t° 75°C 90°C 110°C 120°C m.t. 1 4 13 -

340 DN653x230 V ~ 2

125501380

582532

1,671,53 t° 75°C 90°C 110°C 120°C

m.t. 1 4 – 183x400 V ~

32 1

285028002400

756705535

1,51,30,9


CIRC

ULAT

ORS

AND

IN-L

INE

PUM

PS MODEL CODE

DPH 120/340.65 T 505957622

DPH 150/340.65 T 505958622

DPH 180/340.65T 505959622

DMH 30/360.80 T 505970122

DMH 60/360.80 T 505973122

DPH 120/360.80 T 505977122

DPH 150/360.80 T 505978122

DPH 180/360.80T 505979122


DMH 30/250.40 TBMH 30/250.40 T380 V~ - 400 V~

The Hydraulic values refer to one motor

CENTREDISTANCE

mm

PUMPCOUPLINGS


HEADPRESSURE


1/minP1 MAX

WInA

340 DN65

3x230 V ~ 21

26302500

1001940

2,852,66

t° 75°C 90°C 110°C 120°C m.t. 6 9 – 22

3x400 V ~321

288028302520

12751200934

2,642,251,52

340 DN65

3x230 V ~ 21

24102250

13451188

3,83,36

t° 75°C 90°C 110°C 120°C m.t. 7 11 18 -

3x400 V ~321

280027302250

179616901210

3,252,93

2

340 DN65

3x230 V ~ 21

23302100

17301570

4,854,5

t° 75°C 90°C 110°C 120°C m.t. 7 11 18 -

3x400 V ~321

276026802150

276023301560

4,23,82,5

360 DN80

3x230 V ~ 21

11001010

313268

1,050,88

t° 75°C 90°C 110°C 120°C m.t. 4 7,5 - 21

3x400 V ~321

137013301030

484437266

1,231

0,51

360 DN80

3x230 V ~ 21

11801100

535465

1,821,55

t° 75°C 90°C 110°C 120°C m.t. 2 5 – 20

3x400 V ~321

139013501100

763663465

2,041,650,89

360 DN80

3x230 V ~ 21

25002340

14101292

3,953,6

t° 75°C 90°C 110°C 120°C m.t. 6 10 – 22

3x400 V ~321

283027802350

182017101302

3,32,932,13

360 DN80

3x230 V ~ 21

21401900

19841695

5,624,82

t° 75°C 90°C 110°C 120°C m.t. 7 11 18 -

3x400 V ~321

271026101940

287026861710

4,644,322,85

360 DN80

3x230 V ~ 21

23802170

16701490

4,74,25

t° 75°C 90°C 110°C 120°C m.t. 7 11 18 -

3x400 V ~321

278027002200

231022101490

43,52,4


CIRC

ULAT

ORS

AND

IN-L

INE

PUM

PS


BPH 60/250.40 M DPH 60/250.40 M

BPH 60/250.40 T DPH 60/250.40 T

BPH 120/250.40 M DPH 120/250.40 M

DPH 120/250.40 TBPH 120/250.40 T380 V~ - 400 V~



CIRC

ULAT

ORS

AND

IN-L

INE

PUM

PS


BMH 30/280.50 T DMH 30/280.50 T

BMH 60/280.50 T DMH 60/280.50 T

BPH 60/280.50 M DPH 60/280.50 M

DPH 60/280.50 TBPH 60/280.50 T



CIRC

ULAT

ORS

AND

IN-L

INE

PUM

PS

380 V~ - 400 V~

BPH 120/280.50 T DPH 120/280.50 T

BPH 150/280.50 T DPH 150/280.50 T

BPH 180/280.50 T DPH 180/280.50 T

BPH 120/280.50 M DPH 120/280.50 M




CIRC

ULAT

ORS

AND

IN-L

INE

PUM

PS

BMH 60/340.65 T DMH 60/340.65 T

BPH 60/340.65 M DPH 60/340.65 M

BPH 60/340.65 T DPH 60/340.65 T

DMH 30/340.65 TBMH 30/340.65 T 380 V~ - 400 V~




CIRC

ULAT

ORS

AND

IN-L

INE

PUM

PS

BPH 150/340.65 T DPH 150/340.65 T

BPH 180/340.65 T DPH 180/340.65 T

BMH 30/360.80 T DMH 30/360.80 T

DPH 120/340.65 TBPH 120/340.65 T 380 V~ - 400 V~




CIRC

ULAT

ORS

AND

IN-L

INE

PUM

PS

BPH 120/360.80 T DPH 120/360.80 T

BPH 150/360.80 T DPH 150/360.80

BPH 180/360.80 T DPH 180/360.80 T

DMH 60/360.80 TBMH 60/360.80 T 380 V~ - 400 V~




CIRC

ULAT

ORS

AND

IN-L

INE

PUM

PS

BPH 60/250.40 T DPH 60/250.40 T

BPH 120/250.40 T DPH 120/250.40 T

BMH 30/280.50 T DMH 30/280.50 T

DMH 30/250.40 TBMH 30/250.40 T 220 V~ - 230 V~




CIRC

ULAT

ORS

AND

IN-L

INE

PUM

PS

BPH 60/280.50 T DPH 60/280.50 T

BPH 120/280.50 T DPH 120/280.50 T

BPH 150/280.50 T DPH 150/280.50 T�

DMH 60/280.50 TBMH 60/280.50 T

�

220 V~ - 230 V~




CIRC

ULAT

ORS

AND

IN-L

INE

PUM

PS

BMH 30/340.65 T DMH 30/340.65 T

BMH 60/340.65 T DMH 60/340.65 T

BPH 60/340.65 T DPH 60/340.65 T

DMH 180/280.50 T�

BMH 180/280.50 T�

220 V~ - 230 V~




CIRC

ULAT

ORS

AND

IN-L

INE

PUM

PS

BPH 150/340.65 T DPH 150/340.65 T

BPH 180/340.65 T DPH 180/340.65 T

BMH 30/360.80 T DMH 30/360.80 T

DPH 120/340.65 TBPH 120/340.65 T

� �

220 V~ - 230 V~




CIRC

ULAT

ORS

AND

IN-L

INE

PUM

PS

BPH 120/360.80 T DPH 120/360.80 T

BPH 150/360.80 T DPH 150/360.80 T

BPH 180/360.80 T DPH 180/360.80 T�

DMH 60/360.80 BMH 60/360.80

�

220 V~ - 230 V~




CIRC

ULAT

ORS

AND

IN-L

INE

PUM

PS DIMENSIONS AND WEIGHTS - SINGLE WITH OVAL FLANGES

BMH - BPH...M BMH - BPH...T

MODEL L L1 L2 A B B1 B2 D D1 D2 D3 D4 I M H H1 H2 WEIGHTKg

Q.TY XPALLET

BMH 30/250.40 T 250 125 125 18 266 66 200 150 110 100 80 40 100 M10 221 83 138 17,5 24

BPH 60/250.40 M 250 125 125 18 266 66 200 150 110 100 80 40 100 M10 221 83 138 17,5 24

BPH 60/250.40 T 250 125 125 18 266 66 200 150 110 100 80 40 100 M10 221 83 138 17,5 24

BPH 120/250.40 M 250 125 125 18 266 66 200 150 110 100 80 40 100 M10 221 83 138 17,5 24

BPH 120/250.40 T 250 125 125 18 266 66 200 150 110 100 80 40 100 M10 221 83 138 17,5 24

BMH 30/280.50T 280 140 140 18 312 73 239 165 125 110 90 50 100 M10 254 96 158 24 24

BMH 60/280.50T 280 140 140 18 312 73 239 165 125 110 90 50 100 M10 254 96 158 24 24

BPH 60/280.50 M 280 140 140 18 312 73 239 165 125 110 90 50 100 M10 254 156 158 24 24

BPH 60/280.50 T 280 140 140 18 312 73 239 165 125 110 90 50 100 M10 254 156 158 24 24

BPH 120/280.50 M 280 140 140 18 312 73 239 165 125 110 90 50 100 M10 254 96 158 24 24

BPH 120/280.50 T 280 140 140 18 312 73 239 165 125 110 90 50 100 M10 254 96 158 26 24

BPH 150/280.50 T 280 140 140 18 362 73 289 165 125 110 90 50 100 M10 254 96 158 26 24

BPH 180/280.50 T 280 140 140 18 362 73 289 165 125 110 90 50 100 M10 254 96 158 26 24

BMH 30/340.65 T 340 170 170 18 334 82 252 185 145 130 110 65 100 M12 259 100 159 27,5 12

BMH 60/340.65 T 340 170 170 18 334 82 252 185 145 130 110 65 100 M12 259 100 159 27,5 12

BPH 60/340.65 M 340 170 170 18 334 82 252 185 145 130 110 65 100 M12 259 100 159 27,5 12

BPH 60/340.65 T 340 170 170 18 334 82 252 185 145 130 110 65 100 M12 259 100 159 30,5 12

BPH 120/340.65 T 340 170 170 18 384 82 302 185 145 130 110 65 100 M12 259 100 159 32,5 12

BPH 150/340.65 T 340 170 170 18 384 82 302 185 145 130 110 65 100 M12 259 100 159 32,5 12

BPH 180/340.65 T 340 170 170 18 384 82 302 185 145 130 110 65 100 M12 259 100 159 32,5 12

BMH 30/360.80 T 360 170 190 18 354 97 254 200 160 150 130 80 115 M12 297 100 159 31 12

BMH 60/360.80 T 360 170 190 18 404 97 307 200 160 150 130 80 115 M12 259 100 159 40 12

BPH 120/360.80 T 360 170 190 18 404 97 307 200 160 150 130 80 115 M12 259 100 159 40 12

BPH 150/360.80 T 360 170 190 18 404 97 307 200 160 150 130 80 115 M12 259 100 159 40 12

BPH 180/360.80 T 360 170 190 18 404 97 307 200 160 150 130 80 115 M12 259 100 159 40 12



CIRC

ULAT

ORS

AND

IN-L

INE

PUM

PS

DIMENSIONS AND WEIGHTS - TWIN WITH OVAL FLANGES

DMH - DPH...M DMH - DPH...T

MODEL L L1 L2 A B B1 B2 D D1 D2 D3 D4 I I1 I2 I3 M H H1 H2 WEIGHTKg

Q.TY XPALLET

DMH 30/250.40 T 250 105 145 18 271 66 205 150 110 100 80 40 200 100 100 100 M12 476 238 238 32 12

DPH 60/250.40 M 250 105 145 18 271 66 205 150 110 100 80 40 200 100 100 100 M12 476 238 238 32 12

DPH 60/250.40 T 250 105 145 18 271 66 205 150 110 100 80 40 200 100 100 100 M12 476 238 238 32 12

DPH 120/250.40 M 250 105 145 18 271 66 205 150 110 100 80 40 200 100 100 100 M12 476 238 238 32 12

DPH 120/250.40 T 250 105 145 18 271 66 205 150 110 100 80 40 200 100 100 100 M12 476 238 238 32 12

DMH 30/280.50 T 280 130 150 18 305 73 232 165 125 110 90 50 240 120 120 120 M14 552 276 276 51,5 8

DMH 60/280.50 T 280 130 150 18 305 73 235 165 125 110 90 50 240 120 120 120 M14 556 278 278 44,5 8

DPH 60/280.50 M 280 130 150 18 308 73 235 165 125 110 90 50 240 120 120 120 M14 554 278 278 44,5 8

DPH 60/280.50 T 280 130 150 18 308 73 235 165 125 110 90 50 240 120 120 120 M14 554 278 278 44,5 8

DPH 120/280.50 M 280 130 150 18 308 73 235 165 125 110 90 50 240 120 120 120 M14 556 278 278 44,5 8

DPH 120/280.50 T 280 130 150 18 308 73 235 165 125 110 90 50 240 120 120 120 M14 556 278 278 49 8

DPH 150/280.50 T 280 130 150 18 358 73 285 165 125 110 90 50 240 120 120 120 M14 556 278 278 49 8

DPH 180/280.50 T 280 130 150 18 358 73 285 165 125 110 90 50 240 120 120 120 M14 556 278 278 49 6

DMH 30/340.65 T 340 138,5 201,5 18 328 82 246 185 145 130 110 65 240 120 120 140 M14 476 238 238 57 8

DMH 60/340.65 T 340 138,5 201,5 18 331 82 249 185 145 130 110 65 240 120 120 140 M14 476 238 238 50 8

DPH 60/340.65 M 340 138,5 201,5 18 331 82 249 185 145 130 110 65 240 120 120 140 M14 476 238 238 50 8

DPH 60/340.65 T 340 138,5 201,5 18 331 82 249 185 145 130 110 65 240 120 120 140 M14 476 238 238 54,5 8

DPH 120/340.65 T 340 138,5 201,5 18 381 82 299 185 145 130 110 65 240 120 120 140 M14 476 238 238 59 8

DPH 150/340.65 T 340 138,5 201,5 18 381 82 299 185 145 130 110 65 240 120 120 140 M14 476 238 238 59 8

DPH 180/340.65 T 340 138,5 201,5 18 381 82 299 185 145 130 110 65 240 120 120 130 M14 476 238 238 59 8

DMH 30/360.80 T 360 160 200 18 345 97 248 200 160 150 130 80 240 120 120 150 M14 480 240 240 54,5 8

DMH 60/360.80 T 360 160 200 18 390 97 298 200 160 150 130 80 240 120 120 150 M14 480 240 240 72 8

DPH 120/360.80 T 360 160 200 18 390 97 298 200 160 150 130 80 240 120 120 150 M14 480 240 240 72 8

DPH 150/360.80 T 360 160 200 18 390 97 298 200 160 150 130 80 240 120 120 150 M14 480 240 240 72 8

DPH 180/360.80 T 360 160 200 18 390 97 298 200 160 150 130 80 240 120 120 150 M14 480 240 240 72 8

SLOTSSLOTS



CIRC

ULAT

ORS

AND

IN-L

INE

PUM

PS

POSITION OF TERMINAL BOARD - BMH - BPH - DMH - DPH

* For installation in air-conditioning systems only use the circulator in the terminal board positions marked with the asterisk.

SINGLE

DN 40-50-65-80 DN 65-80

*

*

*

*

*

*

TWIN

DN 65-80 DN 40-50-65-80

**


Documents

WET ROTOR CIRCULATORSDPH - DMH - BPH - BMH WET ROTOR CIRCULATORS TECHNICAL DATA - SINGLE WITH OVAL FLANGES HEATING AND AIR CONDITIONING SYSTEMS Pump for circulating hot water in small