Woven Shadesaz480170.vo.msecnd.net/54ec9611-9dcc-4a1f-8ca0-228… · · 2016-03-28• Manh Truc Woven Shades • Manh Truc Panel Drape ... 1” Projection Angle Iron - Place the

*Click BACK on any page to return to the Table of Contents*

• Manh Truc Woven Shades

• Manh Truc Panel Drape

• Manh Truc Panel Track

Woven Shades

Installation Instructions

Manh Truc Installation Instructions 2 BACK

Tools NeededPower Drill, 1/4” Driver and drill bitsTape MeasureFlat blade ScrewdriverPhillips ScrewdriverPencilLevel

Thank you for choosing Manh Truc Woven Shades. With proper installation and care, your new shades will provide many years of beauty and performance.

Mounting Surface FastenerWood

Drywall, Plaster

Metal

#6 Hex HeadProvided

Wall AnchorsNot Provided

Sheet Metal Not Provided

Installation InstructionsManh Truc Woven Shades

16” - 36 1/4” 36 3/16” - 72 3/16” 72 1/2” - 108 3/16” 108 1/2” - 144”

Shade Width Brackets Required

2 3 4 5

New York BracketsInside MountOutside Mount

Optional L Bracket 3” Angle Iron 4” Angle Iron1” Projection Bracket

BEFORE INSTALLING - Remove shade from the package. Keep all packaging until the shade operates to your satisfaction. Contents of your hardware package may vary depending on options chosen. Additional fasteners may be needed based on your specific mounting surface. Fold down structured returns from the top of the headrail but do not yet adhere to the shade.

INSTALL THE BRACKETS Outside Mount - New York 2” Projection - Remove wing nut from the bracket and place the bracket on the headrail to check for hardware and other obstructions that may interfere with the operation of the shade and adjust the location accordingly.

- Center the shade on the window opening and mark the outside edges of the headrail and the bracket locations.

- Use two screws (and appropriate fasteners if needed) to attach each installation bracket to the wall.

Outside Mount - Optional L Bracket or Angle Iron 2” - Place the bracket on the headrail to check for hardware and other obstructions that may interfere with the operation of the shade, and adjust the location accordingly. - Secure the brackets to the wall using 1 1/2” screws.

Parts ListScrews: 1 1/2” into wall 3/4” into headrail 3” for 1” projection

Cord Cleat: 1 per standard shade 2 per TD/BU shade

1 1/2” ScrewWall Surface

Wall Surface

1 1/2” Screw

New York Bracket

L or Angle Bracket

Manh Truc Installation Instructions 3BACK

INSTALL THE BRACKETS (Cont.) Outside Mount - 1” Projection Angle Iron - Place the bracket on the headrail to check for hardware and other obstructions that may interfere with the operation of the shade and adjust the location accordingly.

- Center the shade on the window opening and mark the outside edges of the headrail and the bracket locations.

- Remove the brackets from the headrail and secure the brackets to the wall using 1 1/2” screws.

Inside Mount (Optional) - New York Bracket - Remove wing nut from the bracket and place the bracket on the headrail to check for hardware and other obstructions that may interfere with the operation of the shade and adjust the location accordingly.

- Remove the brackets from the headrail and secure the brackets to thetop window sill using 1 1/2” screws.

1 1/2” Screw

INSTALL THE SHADE (Cont.) Inside Mount - Standard 1” and 2” Projection - Pre-drill vertically through the headrail with a 3/16” bit before securing with a screw.

Inside Mount - Optional New York Bracket - Insert the stud on the New York bracket into the slot cut into the headrail and secure with the wing nut.

INSTALL THE SHADE Outside Mount - New York 2” Projection (A.) - Insert the stud on the New York bracket into the slot pre-cut into the headrail and secure with the wing nut.

Outside Mount - Optional L or Angle 2” Projection (B.) - Place headrail on top of angle bracket and secure using 3/4” screws.

Outside Mount - 1” Projection Angle (B.) - Place headrail on top of angle bracket and secure using 3/4” screws.

WALLSURFACE

HEADRAIL

Slot

N.Y. BRACKET

SLOT

New York Bracket

SIDE VIEW

HEADRAIL

3/4"Screw

2 1/2"Projection

SIDE VIEW

WALLSURFACE

L Bracket

A. B.

SIDE VIEWInside Mount

with 1" Projection

Headrail

3"Screw

Valance

Headrail

Valance

* MountingScrews

SIDE VIEWInside Mount

with 2" Projection

Headrail

Bracket Screw

SECURE THE STRUCTURED RETURNS (OB only) - Remove the adhesive cover from the plastic tab on the return. Slide the adhesive tab behind the front of the shade and carefully secure evenly along the edge. Repeat process for the other return.


Majesty ValanceCamelot Valance

Waterfall Valance Cornice

18-2304-00 September 2015

INSTALL HOLD DOWNS (Optional) - Lower the shade and place the pin in the hold-down bracket into the oval rod at the bottom of the shade.

- On the mounting surface, mark the bracket hole locations, check that the brackets are level, and attach them to the mounting surface using two screws.

INSTALL THE VALANCE Stand Alone Valance - Cornices with a 2” projection will come with L brackets for installation. 3” Angle iron brackets are sent with a 3 1/2” projection. 4” Angle iron brackets are sent with a 5 1/2” projection. > Center the cornice over the window and mark bracket placement on the mounting surface. > Install brackets with screws provided (wall fasteners not included) and place the cornice on top of the brackets and attach with a screw.

Board Mounted Waterfall Valance - Valances with a 2” projection will come with L brackets for outside mount installation. - For inside mount installation, screw directly through the top of the board.

HOW TO DRESS THE LINING ON A MANH TRUC SHADE - Most shades with lining will need the lining “dressed” as the shade is pulled up to “train” the lining to fall into the folds each time the shade is operated. This may need to happen for up to the first 6 months after the shade is installed. This is more likely to happen on shades with bulky face material or shades that are over 50” wide or long.

- As the shade is pulled up, watch the back side. If the lining does not fall into the folds naturally then you will need to tuck in the lining as each fold occurs rather than waiting until the shade is completely raised. The lining will eventually “learn” the behavior and will not need the extra attention.

- If the lining is not dressed it will bunch up on the back side of the shade. When the lining bunches up it puts an extreme amount of stress on the rings, face material, lift cords and hardware operating the shade. The lining also become extremely wrinkled and frayed around the rings if it is not dressed.

- Lafayette cannot be held responsible for problems that may occur due to the lining not being “dressed”. The lining must be properly “dressed” to ensure the shade will operate properly.

CARE AND CLEANING - Light dusting is recommended for Manh Truc fabrics. Because the Manh Truc materials are “natural” and include grasses, reeds and bamboos cleaning with water or any detergent is NOT recommended. Dusting with a vacuum attachment can be done with extreme care on low suction. The lining materials for Manh Truc can be spot cleaned using warm water and detergent. Do NOT immerse the lining in water.

OPERATE THE SHADE Cord Lock - To raise or lower the shade, pull toward the inside to release the lock. To re-engage the lock, pull toward the outside.

Achieva Clutch - Check for smooth operation of the shade. Pulling on one side of the cord loop will raise the shade, the other side will lower the shade. If the shade binds, all hardware and lift cords should be clear of brackets and other obstructions.

INSTALL THE SHADE (Cont.) Specialty Flat Roman Arch - Attach Button Catch to mounting surface with screw. - Button screws directly into the back of the board.

This piece screws into mounting surface

This piece screws into back of board

INSTALL THE VALANCE (Cont.) Camelot & Majesty Valance - Valances will have a 3 1/2” dust cover. “L” brackets with pan head nut and bolts are sent for attachment for outside mount. For inside mount, screw directly though the dust cover. > Mark bracket placement on the mounting surface and install the brackets with the screws provided. > Mark bracket holes on the dust cover and pre-drill holes for bolts or screws. > Place valance on top of the brackets and attach brackets to the valance with pan head nut and bolt.


Installation InstructionsPanel Drape


Mounting Surface FastenerWood

Drywall, Plaster

Metal

#6 Hex HeadProvided



Parts ListScrews: 1 1/2” into wall 3/4” into headrail 3” for 1” projection

Cord Cleat: 1 per standard shade 2 per TD/BU shade

Up to 48 1/4” 48 3/16” - 60 1/16” 60 1/4” - 72 1/16” 72 1/4” - 84 1/16 84 1/4” - 96 1/16” 96 1/4” - 108 1/16” 108 1/4” - 120”

Panel Width Brackets Required

5 6 7 8 91011

Thank you for choosing Lafayette’s Panel Drape. With proper installation and care, your new panel drape will provide many years of beauty and performance.

BEFORE INSTALLING - Remove shade from the package. Keep all packaging until the shade operates to your satisfaction. Contents of your hardware package may vary depending on options chosen. Additional fasteners may be needed based on your specific mounting surface.

INSTALL THE BRACKETS Wall Bracket - The center of the end brackets should be marked on the mounting surface 2” in from the ends of the headrail. Space remaining brackets evenly between the end brackets. Adjust placement to avoid any obstructions that may occur.

- Center a bracket over a mark on the mounting surface and making sure bracket is level and aligned, attach the bracket using the screws provided. Repeat the process for the rest of the brackets.

Ceiling Bracket - White and Brown - Center a bracket over a mark on the mounting surface and drill a screw up through the hole in the bracket. DO NOT tighten the screw. Repeat the previous steps for the remaining brackets.

.

Space Evenly Space Evenly2” 2”

Ceiling

Screw InDo Not TightenWhite Bracket

Ceiling

Screw InDo Not Tighten Brown Bracket


INSTALL THE DRAPERY ROD Wall Bracket - Taking the drapery rod, insert the back edge of the rod into the mounting bracket.

- Push up on the drapery rod to snap it in the front and tighten each screw on the bracket to hold the rod securely in place.

Ceiling Bracket - White - Insert the back edge of the drapery rod into the bracket and push back.

- Push up on the front of the drapery rod. (If done correctly, you should hear the rod snap into the bracket) and tighten the screw on all brackets.

Ceiling Bracket - Brown - Install the drapery rod by sliding the end of the rod through the brackets until each bracket is holding the rod. Make sure the rod is positioned correctly and tighten the screw on all brackets.

Push Back

Ceiling

Ceiling

Push Up

Push Back

Push Up

Tighten

Ceiling

Slide through each bracket

Tighten

INSTALL THE PANEL DRAPE Wall Bracket - First make sure the end caps are not inserted into the ends of the drapery rod.

- Making sure that the front of the panel drape is showing, start to insert each of the carriers into the end of the drapery rod.

- For the end that has to be stationary, insert a screw stopper into the correct end of the drapery rod before you insert the final carrier.

- After inserting the final carrier, insert an end cap on the stationary side and tighten it with a screwdriver.

- Tighten the screw stopper making sure the carrier is right in between the screw stopper and the end cap screw. Note: If the drapery rod will not fit in all the brackets, make sure all of the brackets are level and aligned. Also make sure that the screws are loose enough on the bracket for the rod.

18-5704-00 September 2015

CARE AND CLEANING - Light dusting is recommended for Manh Truc fabrics. Because the Manh Truc materials are “natural” and include grasses, reeds and bamboos cleaning with water or any detergent is NOT recommended. Dusting with a vacuum attachment can be done with extreme care on low suction. The lining materials for Manh Truc can be spot cleaned using warm water and detergent. Do NOT immerse the lining in water.


Custom Window ShadesPanel Track

Mounting Surface Fastener

Wood

Drywall, Plaster

Metal

#6 Hex HeadProvided




Remove shade from the package. Keep all packaging material until the shade is installed and working to your satisfaction. All bracket mounting screws must screw into wood. If the instal-lation requires mounting the brackets to a surface other than wood, be sure to use the appropriate fastener.

Up to - 52 1/4” 52 3/16” - 72 1/4” 72 5/16” - 104 1/4”104 5/16” - 130 1/4”130 5/16” - 144 1/4”144 5/16” - 182 1/4”182 5/16” - 192”

Brackets Required

2 3 4 5 6 7 8

Shade Width

INSTALL THE BRACKETS Inside Mount - The swivel brackets must be located 4” in from the ends of the track. For the two and three channel track, you must have a minimum of 1 3/4” of space from the center of the hole in the bracket and window. The four and five channel tracks require a minimum of 2 3/8” space from the center of the hole to the window. Be sure to allow for window cranks or T-handles. The miminum distance will ensure the panels have enough room to open and close. > Measure 4” in from each end, mark for the bracket and use a level to make sure brackets are in a straight line. > If more than two brackets are required, evenly space and mark for the rest of the brackets. > Attach the swivel brackets with the screws provided. Note: If installing a valance inside the window, you must install the valance before attaching the track to the brackets. Outside Mount - Locate the position of the headrail over the window and mark the location of the ends on the wall.

- Attach the extension brackets to the wall 4” in from the ends of the headrail, making sure the brackets are level.

- If more than two brackets are required, space evenly and mark for the rest of the brackets.

- Attach the swivel brackets to the extension brackets with the pan head nut and bolt. - If installing a valance, separate brackets are used.

Thank you for choosing Manh Truc Woven Shades. With proper installation and care, your new shades will provide many years of beauty and performance.

Short Extension BracketLong Extension Bracket

Key for 3-4-5 Way Rail


INSTALL THE HEADRAIL - Rotate the swivel brackets to the open position. (Fig 1)

- Raise the headrail to the brackets, you may have to adjust the swivels to receive the track.

- Once the headrail is in position, rotate the swivel bracket to the closed position. (Fig 2)

- If the headrail requires more than one bracket, starting as close to the center as possible will make the installation easier.

INSTALL THE PANELS - Pull forward on the bottom of the front panel carrier and pushing back on the bottom of the back panel carrier, slide the back carrier from behind the front carrier. Repeat this for step for all of the panels on the headrail. (Fig 4)

- Align the velcro strip at the top of the panel with the velcro strip on the face of the panel carrier. Beginning at one end, press the velcro strips together across the panel carrier. (Fig 5)

- Be sure to go back and press the velcro to secure the attachment. (Fig 6) Repeat this step until all the panels are attached to the headrail..

- After all the panels have been installed, return the carriers to their original position. (Fig 7)

- When completed the panels should have overlaps as in (Fig 8).

Fig 5

Fig 6

Fig 4

Fig 7

Fig 8

INSTALL CORD TENSION LOCK - The revised American National Standard for Safety of Corded Window Covering products requires if corded window products are used in the home, cord cleats or cord tension locks must be properly installed.

- See separate instructions included for installation of the Cord Tension Lock for child and pet safely.

CARE AND CLEANING Shade fabrics can be cleaned periodically using a vacuum with a soft bristle attachment. Shade fabrics with fiberglass or PVC can usually be wiped gently with mild detergent. We recommend testing a small area prior to cleaning entire shade. For shade fabric content refer to the Genesis technical specifications found in the Dealer Center under Product Information/ Genesis. Pattern Hainje is a paper based material and is not recommended to come in contact with water. Ultrasonic cleaning is not recommended.

18-2204-PT March 2016

Open Position

Fig 1

Closed Position

Fig 2

Documents

Woven Shadesaz480170.vo.msecnd.net/54ec9611-9dcc-4a1f-8ca0-228… · · 2016-03-28• Manh Truc Woven Shades • Manh Truc Panel Drape ... 1” Projection Angle Iron - Place the