XL LTE 1800MHz SOP Implementation

www.huawei.com www.huawei.com

Huawei XL LTE 1800 MHz SOP Implementation

Huawei Confidential Page 2

Software version

SRAN9.0

NE Name NE Count Target Version (R&D）

BSC6900 GO BSC6900V900R016C00SPC620

BSC6900 UO BSC6900V900R016C00SPC620

BTS3900A_GSM BTS3900 V100R009C00SPC186

BTS3900L_GSM BTS3900 V100R009C00SPC186

M2000 V200R014C00SPC210

CME V200R014C00SPC210


On Site Operation Process

On site Team : 1. Insert UMPT or replace GTMU with UMPT 2. Insert UBBP slot 3 for GSM only, and slot 2 if WBBP exist in slot 3 3. Upgrade cabinet to Ver. D if scenario using MRFUd, then continue install MRFUd 1800 Mhz 4. Install RRU 3939 if scenario using RRU 5. Reroute CPRI connection based on scenario implementation 6. Cut over transmission to UMPT and new port on RTN/MSTP 7. Download BTS3900 V100R009C00SPCXXX to UMPT (25 minutes) 8. Activate software (10 minutes) 9. SPL software (5 minutes) 10. Download script 11. Activate script 12. Inform to monitoring team whether OM has been Ok or not 13. Dismantle unused materials Monitoring Team : 1. Delete original NE GBTS , Then synchronize NE on U2000 2. Activate eGBTS license dan eNodeB license 3. If existing has 3G, ask RTN/TRM team to reroute IuB vlan service


Download software to UMPT (20 menit)

Make sure SFTP is running. Double click application below :

Setting IP Laptop: 192.168.0.50 (or 17.21.2.XX) Login via Internet Explorer : IP : 192.168.0.49 (or 17.21.2.15) User name : admin Password : hwbs@com (or NodeB)


Download software to UMPT (25 minutes)

DLD SOFTWARE: MODE=IPV4, IP="192.168.0.50", USR="admin", PWD="*****", DIR="D:\BTS3900 V100R009C00SPC170_ALL(Software)", SWT=SOFTWARE, SV="D:\BTS3900V100R009C00SPC170", DC=NO, ATL=GBTS&NodeB;

FTP Server IP = IP Laptop Directory Name : address where we save the software


Activate Software (10 minutes)

ACT SOFTWARE: OT=NE, SWT=SOFTWARE, SV="BTS3900V100R009C00SPC170", ATL=GBTS&NodeB;


SPL Software (5 Minutes)

SPL SOFTWARE: MODE=IPV4, IP="192.168.0.50", USR="admin", PWD="*****", DIR="D:\BTS3900 V100R009C00SPC170_ALL(Software)", SDL=YES;

Verify SPL software : Run MML command DSP GLOCELL If the MML is not appear, it means SPL software has not succeed


Software Verification

DSP APP:;


Download script

DLD CFGFILE: IP="192.168.20.48", USR="admin", PWD="*****", DIR="E:\compt", FN="E720G_3G_KESAWAN_FullExport_20141124022032";


Activate script

ACT CFGFILE: EFT=AFTER_RESET;

Then Reset UMPT board (From LMT / plug-unplug)


Check Software Version and Cell Service

• LST VER :; • DSP APP:; • DSP LICENSE: FUNCTIONTYPE=GBTS; • DSP LICENSE: FUNCTIONTYPE=NodeB; • DSP LICINFO:; • CHK DATA2LIC:; • LST ULOCELL: MODE=ALLLOCALCELL; //3G Cell • DSP GLOCELL:; //2G Cell • DSP CELL:; //LTE Cell • Monitor Channel Status and Traffic


BBU Solution

Before

After

GSM Only

- ADD UMPTb1 (slot 7)

- ADD UBBPd3 (Slot 3)

- ADD UBRI (Optional)


BBU Solution

Before

After

GU Co-Cabinet

- ADD UMPTb1 (slot 7)

- Move WBBP slot 2 to

slot 4

- ADD UBBPd3 (Slot 2)

- ADD UBRI (Optional)


RF Solution


Scenario 1: Existing site is G900 only

Solution : - Keep GTMU - Add DCDU-12B + 3 RRU 3939 (LO) - Add UMPTb1 (LTE Only) slot 7 - Add UBBPd6 slot 3

Existing : - 3 MRFU V2 900MHz - BBU Box : GTMU

BEFORE


Scenario 1: Existing site is G900 only

Solution : - Keep GTMU - Add DCDU-12B + 3 RRU 3939 (LO) - Add UMPTb1 (LTE Only) slot 7 - Add UBBPd6 slot 3

Existing : - 3 MRFU V2 900MHz - BBU Box : GTMU

AFTER


Scenario 2: Existing site is D1800 only

Solution : - Add DCDU-12B + 3 RRU 3939 (GL SDR) / MRUFd 1800 - Add UMPTb1 GL co-MPT slot 7 - Add UBBPd3 to slot 3 -Dismantle RRU 3926 / MRFU V2 1800 -Dismantle GTMU -CPRI MUX from UBBPd3 to RRU 3939

Existing : - 3 MRFU V2 1800MHz or RRU 3926 V3 - BBU Box : GTMU

BEFORE


Scenario 2: Existing site is D1800 only

Solution : - Add DCDU-12B + 3 RRU 3939 (GL SDR) / MRUFd 1800 - Add UMPTb1 GL co-MPT slot 7 - Add UBBPd3 to slot 3 -Dismantle RRU 3926 / MRFU V2 1800 -Dismantle GTMU -CPRI MUX from UBBPd3 to RRU 3939

Existing : - 3 MRFU V2 1800MHz or RRU 3926 V3 - BBU Box : GTMU

AFTER


Scenario 3: Existing site is G900 + D1800

Solution : - Add DCDU-12B + 3 RRU 3939 (GL) - Add UMPTb1 GL co-MPT slot 7 - Add UBBPd3 to slot 3 -dismantle MRFU V2 OL1 -Keep GTMU for UL interface only -CPRI MUX from UBBPd3 to RRU 3939

Existing : -3 MRFU V2 900MHz + 3 MRFU V2 1800MHz -BBU Box : GTMU

BEFORE


Scenario 3: Existing site is G900 + D1800

Solution : - Add DCDU-12B + 3 RRU 3939 (GL) - Add UMPTb1 GL co-MPT slot 7 - Add UBBPd3 to slot 3 -dismantle MRFU V2 OL1 -Keep GTMU for UL interface only -CPRI MUX from UBBPd3 to RRU 3939

Existing : -3 MRFU V2 900MHz + 3 MRFU V2 1800MHz -BBU Box : GTMU

AFTER


Scenario 4: Existing site is G900 + U2100

Existing : -3 MRFU V2 900MHz + 3 WRFU / RRU 3839 -BBU Box : GTMU , WMPT , WBBP (slot 1-2-3)

Solution : - Add DCDU-12B + 3 RRU 3939 - Replace GTMU with UMPTb1 (GL co-MPT) slot 6 - Move existing WBBP slot 2 to slot 4 -Insert UBBPd3 in slot 2 - dismantle GTMU

BEFORE


Scenario 4: Existing site is G900 + U2100

Existing : -3 MRFU V2 900MHz + 3 WRFU / RRU 3839 -BBU Box : GTMU , WMPT , WBBP (slot 1-2-3)

Solution : - Add DCDU-12B + 3 RRU 3939 - Replace GTMU with UMPTb1 (GL co-MPT) slot 6 - Move existing WBBP slot 2 to slot 4 -Insert UBBPd3 in slot 2 - dismantle GTMU

AFTER


Scenario 5: Existing site is D1800 + U2100

Solution: - Swap cabinet to Ver.D - Replace MRFU V2 to MRFUd 1800 (GL SDR) - Replace GTMU to UMPTb1 (GL co-MPT) slot 6 - Move existing WBBP slot 2 to slot 4 -Add UBBPd3 to slot 2 -CPRI MUX from UBBPd3 to MRFUd 1800 -Dismantle GTMU - dismantle old cabinet OL1

Existing : -3 MRFU V2 1800MHz + 3 WRFU / RRU 3839 -BBU Box : GTMU , WMPT , WBBP (slot 1-2-3) - BTS3900A Cabinet ver.B

BEFORE


Scenario 5: Existing site is D1800 + U2100

Solution: - Swap cabinet to Ver.D - Replace MRFU V2 to MRFUd 1800 (GL SDR) - Replace GTMU to UMPTb1 (GL co-MPT) slot 6 - Move existing WBBP slot 2 to slot 4 -Add UBBPd3 to slot 2 -CPRI MUX from UBBPd3 to MRFUd 1800 -Dismantle GTMU - dismantle old cabinet OL1

Existing : -3 MRFU V2 1800MHz + 3 WRFU / RRU 3839 -BBU Box : GTMU , WMPT , WBBP (slot 1-2-3) - BTS3900A Cabinet ver.B

AFTER

HISILICON SEMICONDUCTOR

35pt

: R153 G0 B0

:

LT Medium

: Arial

32pt

: R153 G0 B0

黑体

22pt

) :18pt

黑色

:

LT Regular

: Arial

20pt

):18pt

黑色

细黑体

Documents

XL LTE 1800MHz SOP Implementation