Embed Size (px)
Citation preview
Turn
in
g Your Assets into Dollars
Public AuctionMACHINERY
AUCTION
EVERYTHINGMUST SELL!
Asset Sales, Inc.Corporate Headquarters
163 Associates LaneIndian Trail, NC 28079
Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325 www.asset-sales.com [email protected]
European Headquarters6 Hill End Close, Norwood GreenHalifax, West Yorkshire, HX3 8RH
Tel / Fax [email protected]
MAJOR MANUFACTURERCNC MACHINING, TURNING, LASER & FABRICATING
1400 N. 14TH STREET - OAKES, ND 58474TUESDAY, NOVEMBER 13TH @ 10:00 A.M. CST
Inspection: Monday, November 12th, From 8:00 A.M. - 4:00 P.M. CST
TRUMPF TRUMATIC L4030 4000 WATT CNC LASER BURNING MACHINE
MAZAK SLANT TURN 550M 12-1/2" BORE CNC TURNING CENTER
2005
2012
MAZAK NEXUS 6000-II FMS (PALLETECH SYSTEM) CNC HORIZONTAL MACHINING CENTER
TOYODA FA-800 (8) PALLET CNC HORIZONTAL MACHINING CENTER, 4-AXIS
2005
2007
4000WATT
8PALLET
MILLING FMS
MACHINERY INSPECTION DATE & TIME – MONDAY, NOVEMBER 12TH FROM 8:00 A.M. - 4:00 P.M. CST
2
CNC HORIZONTAL MACHINING CENTERSTOYODA FA-800 (8) Pallet CNC Horizontal Machining Center, 4-Axis with (8) 31.5” x 31.5” Pallets, 1 Degree, #50 Taper Spindle Speeds to 6000 RPM, 120 ATC, 53” X-Axis, 45” Y-Axis, 45” Z-Axis Travels, Wired for Renishaw Probing, Thru-Spindle Coolant & FANUC 16i-MB CNC Control, sn:NS1114, mfg.2005
MAZAK Nexus 6000-II FMS (PALLETECH System) CNC Horizontal Machining Center, 4-Axis with 14 Position Linear Pallet Storage, (9) 19.75” x 19.75” Pallets, 1 Degree, #50 Taper Spindle Speeds to Hi-Torque 7000 RPM, 120 ATC, 31.5” X-Axis, 31.5” Y-Axis, 31.5” Z-Axis Travels, Wired for Renishaw Probing, High Pressure Thru-Spindle Coolant & MAZATROL NEXUS CNC Control, sn:192656, Installed New 2007, (Flexible Manufacturing Cell with Space for 2nd Machining Center)
(2) NIIGATA SPN50-H.O. CNC Horizontal Machining Centers, 4-Axis with (2) 19.75” x 19.75” Pallets, .001 Degree, #50 Taper High Output Spindle Speeds to 15,000 RPM, 31.5” X-Axis, 29.5” Y-Axis, 29.5” Z-Axis Travels, 60 HP, Thru-Spindle Coolant & FANUC 16i-M CNC Controls, sn:46620520 ● sn:46620506, mfg.2001
TOYODA FA-800 (8) PALLET CNC HORIZONTAL MACHINING CENTER, 4-AXIS
MAZAK NEXUS 6000-II FMS (PALLETECH SYSTEM) CNC HORIZONTAL MACHINING CENTER, 4-AXIS
2007
8PALLET
FMS
4AXIS
AUCTION SALE DATE & TIME – TUESDAY, NOVEMBER 13TH @ 10:00 A.M. CST
3
(2) NIIGATA SPN50-H.O. CNC HORIZONTAL MACHINING CENTERS, 4-AXIS
HAAS VF8 CNC VERTICAL MACHINING CENTER HAAS VF7 CNC VERTICAL MACHINING CENTER
CNC VERTICAL MACHINING CENTERS
HAAS VF8 CNC Vertical Machining Center with 36” x 64” Table, #50 Taper Spindle Speeds to 5000 RPM, 64” X-Axis, 40” Y-Axis, 30” Z-Axis Travels, Wired for 4th Axis, Thru-Spindle & Programmable Coolant, HAAS CNC Pendant Control, sn:20822, mfg.2000
HAAS VF7 CNC Vertical Machining Center with 28” x 84” Table, #50 Taper Spindle Speeds to 5000 RPM, 84” X-Axis, 32” Y-Axis, 30” Z-Axis Travels, Wired for 4th Axis, Thru-Spindle & Programmable Coolant, HAAS CNC Pendant Control, sn:16292
2AVAIL.
4AXIS
PARLEC 240 TOOL PRESETTER SPERONI TOOL PRESETTER
2005
MACHINERY INSPECTION DATE & TIME – MONDAY, NOVEMBER 12TH FROM 8:00 A.M. - 4:00 P.M. CST
4
CNC LARGE BORE TURNING CENTERS, OILFIELDMAZAK Slant Turn 550M Large Bore CNC Turning Center with 12-1/2” Thru-Hole, Milling, Front & Rear Capacity to 24” Chuck, 120” Center Distance, C-Axis, Programmable Steady Rest Base, Tailstock & MATRIX NEXUS CNC Control, sn:238659, Low Hours, mfg.2012
WEILER E70/3000 Large Bore CNC Flat Bed Lathe with 8-3/4” Thru-Hole, Front & Rear Capacity to 24-1/2” Chuck, 120” Center Distance, Steady Rest & Tool Post, Tailstock, WEILER D-2 CNC Control, sn:397, mfg.2005
WEILER E90/3000 Large Bore CNC Flat Bed Lathe with 10” Thru-Hole, Front & Rear Capacity to 27-1/2” Chuck, 120” Center Distance, Steady Rest & Tool Post, Tailstock, WEILER D-3 CNC Control, sn:B104, mfg.2006
Large Assortment of MAZAK Live Tools, WEILER Steady Rests, SAUTER Precision Toolpost (Boring), ID / OD Thread Gges, Etc.
MAZAK SLANT TURN 550M LARGE BORE CNC TURNING CENTER WITH 12-1/2" BORE
WEILER E90/3000 10" LARGE BORE CNC FLAT BED LATHE WEILER E70/3000 8-3/4" LARGE BORE CNC FLAT BED LATHE
2012
2005 2005
MILLING
10"BORE
8-3/4"BORE
12-1/2"BORE
LOWHOURS
AUCTION SALE DATE & TIME – TUESDAY, NOVEMBER 13TH @ 10:00 A.M. CST
5
MAZAK MULTI-PLEX 6300 8-AXIS CNC TURNING CENTER
TRUMPF TRUMATIC L4030 4000 WATT CNC LASER BURNING MACHINE
CNC MULTI-AXIS TURNING CENTER
MAZAK Multi-Plex 6300 8-Axis CNC Turning Center with Milling, (2) 12.5” Schunk 3-Jaw Power Chucks, (2) Turrets with Milling, Tool Presetters, Flex-GL200F CNC Gantry Loader & MAZATROL 640T CNC Control, sn:197655, mfg.2007
Huge Assortment 17 +/- Multi-Plex Live Tools, Static, Etc.
CNC LASERTRUMPF Trumatic L4030 4000 Watt CNC Laser Burning Machine with LIFTMASTER Load & Unload System, (2) 6’ x 13’ Pallets, Approx. 38287 Laser On Hours, Approx. 15062 Beam on Hours, Enclosure, sn:A0240A0123, Installed New 2005
LIFTMASTER LOAD & UNLOAD SYSTEM
2005
2007
4000WATT
LOWHOURS
MACHINERY INSPECTION DATE & TIME – MONDAY, NOVEMBER 12TH FROM 8:00 A.M. - 4:00 P.M. CST
6
PRESS BRAKES(2) BYSTRONIC (HAMMERLE) 130 Ton x 10’ 6-Axis CNC Hydraulic Press Brakes Model P130/310 with 122” Between Housings, Hydraulic Die Clamping, Hydraulic Crowning, Rear Sheet Support Arms, CNC Pendant Controls, sn:K018029 (with Sheet Support) ● sn:K018023 (no Support), mfg.2001
PIRANHA 95 Ton x 10’ Hydraulic Press Brake Model 9510 with Autogauge CNC 99 Backgauge, 101” Between Housings, Operator Pedestal Stand, sn:1053
HI-DEFINITION CNC BURNING MACHINE
ALLTRA 16’ x 45’ Hi-Definition CNC Plasma Burning Machine Model PG14-16 with (2) Plasma Torches, (2) Hypertherm HPR260XD Hyperformance Plasma Units, BURNY 10 LCD Plus CNC Controls with Upgraded Software, sn:5483, mfg.2007
(2) BYSTRONIC (HAMMERLE) 130 TON X 10' 6-AXIS CNC HYDRAULIC PRESS BRAKES
2001
PIRANHA 95 TON X 10' HYDRAULIC PRESS BRAKE
HEM VT130HA-60SS FULLY AUTOMATIC TILT FRAME VERTICAL BANDSAW
WHEELABRATOR TUMBLE BLAST MACHINE
ALLTRA 16' X 45' HI-DEFINITION CNC PLASMA BURNING MACHINE
FARR G-S-4 GOLD SERIES FLOOR STANDING DUST COLLECTOR
2AVAIL.
2006
2007 HI-DEF.
AUCTION SALE DATE & TIME – TUESDAY, NOVEMBER 13TH @ 10:00 A.M. CST
7
(5) GENESIS PANASONIC & IGM MANIPULATOR CELLS
VERTICAL BANDSAW & WHEELABRATORHEM VT130HA-60SS Fully Automatic Tilt Frame Vertical Bandsaw with Programmable Mitre, Auto Feed with Bundling, 20” x 24” Capacity @ 90 ,̊ Controls, sn:955906, mfg.2006
WHEELABRATOR Model 170 Tumble Blast Machine with Rubber Lined Blast Area, Auto Door, Controls & Declaim, sn:47886
ROBOT MIG WELDING SYSTEMS & WELDERSGENESIS PANASONIC VR-006 AL CNC Welding Robot & Manipulator Cell with (2) Sets Preston Easton Adjustable Positioners, (2) Each 36” Diameter Face Plates with Approx. 80” Swing x 160” Maximum Positioned Center Distance, PANASONIC DIP Pulse MIG HM500 500 Amp Welding Power Supply, Wire Feed Unit Welding Torch & CNC Controls, mfg.2000
IGM CNC Welding Robot & Manipulator Cell with (2) Adjustable Positioners, 30” Face Plates with Approx. 72” Swing x 124” Maximum Positioned Center Distance PANASONIC DIP Pulse & LINCOLN Ideal Arc DC-600 Welding Equipment & IGM iTP4 Remote CNC Pendant Controls, mfg.1997
Other CNC Welding Robots & Positioners
Approx. 15 +/- MILLER & PANASONIC Deltaweld 452 Welders, Etc..
PORTABLE COORDINATE MEASURING MACHINE
FARO Platinum Portable Coordinate Measuring Machine with Laptop Computer, Software & Carry Case, sn:P08-02-03-01834, mfg.2014
MISCELLANEOUSFARR G-S-4 Gold Series Floor Standing Dust Collector, sn:737030
(5) ADF Models (3) 800, M200 & M300 Clamshell & Vertical Cabinet Parts Washers, 24” – 32” Diameter Tables, Heated with Timers & Controls, sn:611-5017 ● sn:611-5019 ● sn:708-5113 ● sn:704-5075 ● sn:708-5112
(2) VEGA 2002 Hi-Pressure Coolant Systems
APPL AP-300 HBP Twintower Regenerative Compressed Air Dryer with Maximum 150 PSIG, sn:02-197
PARLEC 240 Tool Presetter, sn:104084-0595
SPERONI Model STP34 Tool Presetter, sn:0005083, mfg.2005
CLARK 5,000lb Capacity Propane Forklift with 189” Lift, Triple Mast, Side Shift, 60” Forks, Soft Tires, sn:CMP230G-0229-6873KF
(2) GRACO PROMIX II Pearl Commet Proportioner Units
Large Assortment of 1/2, 1 & 2 Ton Electric Hoists, Welders & Wire Feeds, Tool Holders, Vises & Fixtures, Conveyors, Cabinets & Etc…
2000
FARO PLATINUM PORTABLE COORDINATE MEASURING MACHINE
2014
5AVAIL.
(2) VEGA 2002 HI-PRESSURE COOLANT SYSTEMS
(5) ADF CLAMSHELL & VERTICAL CABINET PARTS WASHERS
5AVAIL.
Turn
ing Y
our Assets into Dollars Asset Sales, Inc.Corporate Headquarters
163 Associates LaneIndian Trail, North Carolina 28079
Toll Free: 888.800.4442 Direct: 704.821.4315Fax: 704.821.4325 – www.asset-sales.com
Asset Sales Inc. • Lance Mannion – North Dekota License #Applied ForNorth Carolina Lance Mannion #6003 & Asset Sales #6625
MAZAK SLANT TURN 550M 12-1/2" BORE CNC TURNING CENTER
DIRECTIONS HECTOR AIRPORTExit airport to I-29S / US-81 S. Follow I-29S / US-81, take exit 23B to ND-13W. Turn left onto ND-1 S / 110th Ave SE. Turn left onto 87th Street SE. Turn right onto 14th Street N, Plant will be on the left. Follow auction signs.
HOTELSHoliday Inn Fargo3803 13 Ave S. – Fargo, ND 58103(701) 282-2700
Homewood Suits by Hilton Fargo2021 16th St N. – Fargo, ND 58102(701) 235-3150
UPCOMING AUCTIONSTHURSDAY, NOVEMBER 15th - Precision CNC Machine ShopMazak CNC Machining & Turning CentersOnsite / OnlineHarrisburg, PA
PUBLIC AUCTIONMAJOR MANUFACTURER
CNC MACHINING, TURNING, LASER & FABRICATINGOAKES, ND
TUESDAY, NOVEMBER 13TH @ 10:00 A.M. CST
ABBREVIATED TERMS & CONDITIONS OF AUCTIONYOUR PARTICIPATION AND BIDDING ARE CONSIDERED A LEGALLY BINDING CONTRACT – IT IS PROHIBITED TO BID ON ANY ITEM THAT YOU CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE OR REMOVE BY DESIGNATED DATE.
Subject to amendments and modifications announced by the auctioneer at the time of the auction, any person participating in the auction shall be bound by the following terms and conditions. The auctioneer does not warrant the accuracy, authenticity, description, weight, count or measure of any listings specified herein.
All articles will be sold to the highest bidder conforming to the bid process in accordance to the AUCTIONEER’S TERMS & CONDITIONS – COMPLETE COPIES AVAILABLE AT WWW.ASSET-SALES.COM. No article shall be removed unless paid in full and all articles purchased shall be re-moved in the time allocated by the auctioneer. No item, no matter how small or how far the purchaser has to travel, may be removed until the close of the auction sale.
All payments shall be by way of cash, certified check, wire transfer and/or a company check accompanied by a bank letter of guarantee payable
to Asset Sales, Inc. All bidding and invoicing will be in US Dollars ($). All bidders are responsible for all applicable taxes. Rigging/Removal of sold equipment is the sole responsibility of the buyer and must be completed by the posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is complete. All heavy rigging will require a certificate of insurance for $1,000,000.00 naming Asset Sales, Inc. as the insured.ALL SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,” “WITH ALL FAULTS” BASIS. A 15% Buyer’s Premium will apply to all onsite purchases and a 18% Buyer’s Premium for online purchases.REGISTRATION & BIDDING ONLINE:If you plan to bid with Bidspotter.com, you must be pre-approved by Asset Sales, Inc. The pre-approval process is easy, but necessary. Asset Sales, Inc. will verify telephone number and confirm agreement to the Terms and Conditions.ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF $5000 TO BE APPROVED FOR ALL NON-ONSITE BIDDING.
ASSOCIATION OFMACHINERY AND
EQUIPMENT APPRAISERS
2012
THURSDAY, DECEMBER 6th - Tri-Tech USA Inc.OKK, HAAS, Precision CNC & FabricatingOnsite / OnlineLiberty, SC
MILLING
