YOUR HIMALAYAN PINK SALT LAMPINSTRUCTIONS AND SAFETY GUIDE

IMPORTANT PLEASE READ ENTIRE BOOKLET BEFORE USE

Help relax and ease into a good night’s sleep with the soothing red light of a Himalayan Salt lamp.Modern research* suggests that blue light emitted from electronic devices and screens can disrupt the body’s production of melatonin (the sleep hormone) and upset the natural circadian rhythm, increasing alertness at bedtime and resulting in poorer sleep quality.

Himalayan salt lamps can help o� set this, by emitting a warm, red glow which doesn’t impact on circadian rhythms and is thought to help signal to the body that it is time to wind down, encouraging a more deep and restful night’s sleep.

We hope you enjoy using your lamp.

* Reference: https://www.health.harvard.edu/staying-healthy/blue-light-has-a-dark-side

WL_Salt_Lamp_Leafetv3.indd 1 09/03/2018 07:59

UNDERSTANDING YOUR LAMP

How to use your Himalayan Salt LampPrior to use - Inserting the bulb and lead for the �rst time:1. To ensure safety in transit, the bulb for your lamp is stored within its

cardboard packaging, tucked inside your lamp. Therefore, you must remove the entire bulb, including packaging from your lamp before use.

2. Carefully lie your lamp on its side. Insert the bulb holder and cable into the base of the lamp, pushing into place until secure. You only need to do this once - it is not required to change the bulb.

3. Insert the bulb according to the instructions on page 4 of this lea�et. Position your lamp upright and safely, according to the instructions on page 3 of this lea�et.

Safety WarningsElectrical Safety• There is a risk of electric shock if you touch live components.• Never touch or hold the mains plug with wet hands.• Only pull out the mains cable by the plug and never

by the cable, as this could damage it.

Risk of Injury • Do not place the lamp where it can fall. If the lamp falls it

could damage the items it falls on or damage persons nearby.• Do not leave the cable dangling where it can be pulled

and make the lamp fall.• Do not lean on the lamp as this may make it fall.

Risk of Su�ocation • The lamp is packed in a small plastic bag, keep the

packaging out of the reach of children.

!

!

!

Warning Danger of Death!

Warning Risk of Injury!

Warning Risk of Su�ocation!

2

WL_Salt_Lamp_Leafetv3.indd 2 09/03/2018 07:56

YOUR HIMALAYAN PINK SALT LAMPINSTRUCTIONS AND SAFETY GUIDE

IMPORTANT PLEASE READ ENTIRE BOOKLET BEFORE USE

Help relax and ease into a good night’s sleep with the soothing red light of a Himalayan Salt lamp.Modern research* suggests that blue light emitted from electronic devices and screens can disrupt the body’s production of melatonin (the sleep hormone) and upset the natural circadian rhythm, increasing alertness at bedtime and resulting in poorer sleep quality.

Himalayan salt lamps can help o� set this, by emitting a warm, red glow which doesn’t impact on circadian rhythms and is thought to help signal to the body that it is time to wind down, encouraging a more deep and restful night’s sleep.

We hope you enjoy using your lamp.

* Reference: https://www.health.harvard.edu/staying-healthy/blue-light-has-a-dark-side

WL_Salt_Lamp_Leafetv3.indd 1 09/03/2018 07:59

UNDERSTANDING YOUR LAMP

How to use your Himalayan Salt LampPrior to use - Inserting the bulb and lead for the �rst time:1. To ensure safety in transit, the bulb for your lamp is stored within its

cardboard packaging, tucked inside your lamp. Therefore, you must remove the entire bulb, including packaging from your lamp before use.

2. Carefully lie your lamp on its side. Insert the bulb holder and cable into the base of the lamp, pushing into place until secure. You only need to do this once - it is not required to change the bulb.

3. Insert the bulb according to the instructions on page 4 of this lea�et. Position your lamp upright and safely, according to the instructions on page 3 of this lea�et.

Safety WarningsElectrical Safety• There is a risk of electric shock if you touch live components.• Never touch or hold the mains plug with wet hands.• Only pull out the mains cable by the plug and never

by the cable, as this could damage it.

Risk of Injury • Do not place the lamp where it can fall. If the lamp falls it

could damage the items it falls on or damage persons nearby.• Do not leave the cable dangling where it can be pulled

and make the lamp fall.• Do not lean on the lamp as this may make it fall.

Risk of Su�ocation • The lamp is packed in a small plastic bag, keep the

packaging out of the reach of children.

!

!

!

Warning Danger of Death!

Warning Risk of Injury!

Warning Risk of Su�ocation!

2

WL_Salt_Lamp_Leafetv3.indd 2 09/03/2018 07:56

Safety InstructionsPositioning your lamp: • Place the lamp on a �at and stable surface, where it cannot fall, as the lamps

are surprisingly heavy for their size. • Place the lamp only on a strong, secure surface, as it is heavy and could cause

shelving or furniture to break or fall.• Lamps can leave a salty residue, so protect delicate surfaces from direct

contact with the lamp base. • Check that the cable is not dangling where the cable can be pulled or caught,

causing the lamp to fall. The lamp will damage anything that gets in its path and could result in serious injury or death.

• Keep Young Children Under 8 Years Old away from the lamp – so place somewhere where they cannot access it.

• Keep Pets and Animals away from the lamps as they may lick the salt and this may make them unwell.

Use, Maintenance and Care for your lamp: • The lamp may be used by children over the age of 8 years and by persons

with reduced physical, sensory or mental capacity or persons with a lack of experience or knowledge if they are supervised or have been instructed by a responsible person.

• Children must not carry out maintenance work or cleaning. • Humidity in the air can cause the lamp to become damp. If this happens,

simply wipe down with a cloth and move to a warm, dry area to dry the lamp out. Take care when unplugging, that your hands are not wet if you have handled the damp lamp.

Electrical care and maintenance:This lamp operates with 240v of electricity and is �tted with a 3amp fuse. Always treat electrical items with respect and operate safely. If you see any damage, do not use the lamp until the problem is �xed. Only use the lamp in accordance with the manufacturer’s instructions. Always use the correct fuse. Check that the terminal screws are tight and that there are no visible wires.

Before using the lamp please check that the power cable is intact by checking the following before you use each time:

• There is no damage to the lead including fraying, cuts or heavy scu�ng.• There is no damage to the plug; eg to the cover or bent pins.• There are no visible wires where the lead joins the plug.

3

WL_Salt_Lamp_Leafetv3.indd 3 09/03/2018 07:57

• There is no damage to the lead or lamp holder and no loose parts or loose screws.

• There are no signs of overheating; ie burn marks/staining on the plug, lead or lamp.

• Check that the cables are not trapped under furniture or other heavy objects.• Check that the lamp has not been used or stored in unsuitable conditions

such as wet or dusty environments or where water spills are possible.

Replacing the bulbDo not touch bulb with bare hands – always use a cloth or gloves.

1. Unplug cable from mains and wait for lamp to cool before changing bulb.2. Lift up lamp and turn over so it is lying on its side.3. Unscrew the lamp holder anti clockwise until it is removed from lamp.4. 5. Replace with an approved E14 15w pigmy bulb.6. Plug lamp holder cable into the mains and turn on to ensure the

new bulb works.7. 8. Insert bulb and bulb holder back in lamp and screw in a clockwise direction.9. Return the lamp to its upright position and use according to safety

instructions on pages 2 and 3 of this booklet.

Do not insert anything else into the bulb holder other than the correct bulb.

There is a risk of electrocution if the bulb is changed when the lead is still connected to the mains.

If you have any questions or concerns, please call our Freephone Helpline: 0800 321 3342 Or email: customerservices@westlab.co.uk

@westlabsalts

WL_Salt_Lamp_Leafetv3.indd 4 09/03/2018 07:57

Safety InstructionsPositioning your lamp: • Place the lamp on a �at and stable surface, where it cannot fall, as the lamps

are surprisingly heavy for their size. • Place the lamp only on a strong, secure surface, as it is heavy and could cause

shelving or furniture to break or fall.• Lamps can leave a salty residue, so protect delicate surfaces from direct

contact with the lamp base. • Check that the cable is not dangling where the cable can be pulled or caught,

causing the lamp to fall. The lamp will damage anything that gets in its path and could result in serious injury or death.

• Keep Young Children Under 8 Years Old away from the lamp – so place somewhere where they cannot access it.

• Keep Pets and Animals away from the lamps as they may lick the salt and this may make them unwell.

Use, Maintenance and Care for your lamp: • The lamp may be used by children over the age of 8 years and by persons

with reduced physical, sensory or mental capacity or persons with a lack of experience or knowledge if they are supervised or have been instructed by a responsible person.

• Children must not carry out maintenance work or cleaning. • Humidity in the air can cause the lamp to become damp. If this happens,

simply wipe down with a cloth and move to a warm, dry area to dry the lamp out. Take care when unplugging, that your hands are not wet if you have handled the damp lamp.

Electrical care and maintenance:This lamp operates with 240v of electricity and is �tted with a 3amp fuse. Always treat electrical items with respect and operate safely. If you see any damage, do not use the lamp until the problem is �xed. Only use the lamp in accordance with the manufacturer’s instructions. Always use the correct fuse. Check that the terminal screws are tight and that there are no visible wires.

Before using the lamp please check that the power cable is intact by checking the following before you use each time:

• There is no damage to the lead including fraying, cuts or heavy scu�ng.• There is no damage to the plug; eg to the cover or bent pins.• There are no visible wires where the lead joins the plug.

3

WL_Salt_Lamp_Leafetv3.indd 3 09/03/2018 07:57

• There is no damage to the lead or lamp holder and no loose parts or loose screws.

• There are no signs of overheating; ie burn marks/staining on the plug, lead or lamp.

• Check that the cables are not trapped under furniture or other heavy objects.• Check that the lamp has not been used or stored in unsuitable conditions

such as wet or dusty environments or where water spills are possible.

Replacing the bulbDo not touch bulb with bare hands – always use a cloth or gloves.

1. Unplug cable from mains and wait for lamp to cool before changing bulb.2. Lift up lamp and turn over so it is lying on its side.3. Unscrew the lamp holder anti clockwise until it is removed from lamp.4. 5. Replace with an approved E14 15w pigmy bulb.6. Plug lamp holder cable into the mains and turn on to ensure the

new bulb works.7. 8. Insert bulb and bulb holder back in lamp and screw in a clockwise direction.9. Return the lamp to its upright position and use according to safety

instructions on pages 2 and 3 of this booklet.

Do not insert anything else into the bulb holder other than the correct bulb.

There is a risk of electrocution if the bulb is changed when the lead is still connected to the mains.

If you have any questions or concerns, please call our Freephone Helpline: 0800 321 3342 Or email: customerservices@westlab.co.uk

@westlabsalts

WL_Salt_Lamp_Leafetv3.indd 4 09/03/2018 07:57