Download pdf - 371 cassettes

371

Bearings

Brakes

Cables & Casing

Cassettes & Freewheels

Chains & Guides

Chainrings & Guards

Cranks & Btm Brackets

Derailleurs

Fasteners

Forks & Shocks

Grips & Tape

Handlebars & Bar Ends

Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

CO

MP

ON

ENTS

& P

AR

TS

8-11 speed cassettes

Campagnolo Super Record 11sp Cassette

Super Record: an absolute legend, the groupset of champions. •First introduced in 1973, reintroduced to raise the level, 11-speedOptimized 11-speed tooth design for shifting speed and fluidity. •Evolved sprocket timing reduces stress on the chain and allows for easier shifting through the higher cogsTop nine cogs are divided into sets of three and are mounted •on aluminum carriers. This increases rigidity by 180% and the individual cogs are 70% more resistant to torsionFirst five cogs are steel with a nickel-chrome treatment, top six cogs are titanium•11 speed cassettes fit Campagnolo 9-11 speed freehubs•Light alloy lockrings only supplied with 11t cogsets •(12t+ lockrings sold separately). 177g

part# material speed range cogs CP-35051 NiCr/Ti C-11sp 11-23t 11,12,13,14,15,16,17,18,19,21,23 CP-35052 NiCr/Ti C-11sp 11-25t 11,12,13,14,15,16,17,19,21,23,25 CP-35054 NiCr/Ti C-11sp 12-25t 12,13,14,15,16,17,18,19,21,23,25 CP-35056 NiCr/Ti C-11sp 12-27t 12,13,14,15,16,17,19,21,23,25,27 CP-35058 NiCr/Ti C-11sp 12-29t 12,13,14,15,17,19,21,23,25,27,29

Campagnolo Record 11sp CassetteOptimized 11-speed tooth design for shifting speed and fluidity. •Evolved sprocket timing reduces stress on the chain and allows for easier shifting through the higher cogsTop six cogs are divided into sets of three and are mounted •on aluminum carriers. This increases rigidity by 180% and the individual cogs are 70% more resistant to torsionFirst eight cogs are steel with a nickel-chrome treatment, •top three cogs are titanium11-speed cassettes fit Campagnolo 9-11 speed freehubs•Light alloy lockrings only supplied with 11t cogsets •(12t+ lockrings sold separately). 201g

part# material speed range cogs CP-35141 NiCr/Ti C-11sp 11-23t 11,12,13,14,15,16,17,18,19,21,23 CP-35142 NiCr/Ti C-11sp 11-25t 11,12,13,14,15,16,17,19,21,23,25 CP-35144 NiCr/Ti C-11sp 12-25t 12,13,14,15,16,17,18,19,21,23,25 CP-35146 NiCr/Ti C-11sp 12-27t 12,13,14,15,16,17,19,21,23,25,27 CP-35148 NiCr/Ti C-11sp 12-29t 12,13,14,15,17,19,21,23,25,27,29

Campagnolo Record Ultra-Drive 10sp CassetteUltra-Drive 10-speed compatible fits Campagnolo 9/10-speed freehubs•Lockrings only supplied with 11t cogsets (12t+ lockrings sold separately)•Largest cogs paired and pinned to lightweight alloy carriers (in parenthesis)•NiCr/Ti: nickel-chromed steel (1-6 cogs) and titanium (7-10 cogs)•

part# material speed range cogs weight CP-35100 NiCr/Ti C-10sp 11-21t 11,12,13,14,15,16,(17,18),(19,21) 175g CP-35101 NiCr/Ti C-10sp 11-23t 11,12,13,14,15,16,(17,19),(21,23) 190g CP-35102 NiCr/Ti C-10sp 11-25t 11,12,13,14,15,17,(19,21),(23,25) 200g CP-35103 NiCr/Ti C-10sp 12-23t 12,13,14,15,16,17,(18,19),(21,23) 195g CP-35104 NiCr/Ti C-10sp 12-25t 12,13,14,15,(16,17),(19,21),(23,25) 200g CP-35105 NiCr/Ti C-10sp 13-26t 13,14,15,16,(17,18),(19,21),(23,26) 210g CP-35106 NiCr/Ti C-10sp 13-29t 13,14,15,16,(17,19),(21,23),(26,29) 230g

Campagnolo Record Exa-Drive 8sp CassetteExa-Drive 8-speed compatible fits Campagnolo 8-speed •freehubs except ‘96 Record-Ti (does not fit 9/10sp freehubs)NiCr: nickel-chromed steel cogs with weight reducing cutouts•12t+ lockrings sold separately•

part# material speed range cogs weight CP-35122 NiCr/Ti C-8sp 12-23t 12,13,14,15,17,19,21,23 265g CP-35123 NiCr/Ti C-8sp 13-23t 13,14,15,16,17,19,21,23 280g CP-35124 NiCr/Ti C-8sp 13-26t 13,14,15,17,19,21,23,26 310g

Campagnolo Super Record 11sp Cassette

Campagnolo Record 11sp Cassette

Campagnolo Record Ultra-Drive 10sp Cassette

Campagnolo Record Exa-Drive 8sp Cassette

372

COM

PO

NEN

TS

& PA

RTS

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

cassettes 9-11 speed

Campagnolo Ghibli Cassette

9 cogs with 10-speed drivetrain spacing for •Campagnolo Ghibli-specific 10-speed freehubsNiCr: nickel-chromed steel cogs with weight reducing cutouts•

part# speed range cogs weight CP-35019 10sp/9cogs 11-19t 11,12,13,14,15,16,17,18,19 165g CP-35020 10sp/9cogs 11-21t 11,12,13,14,15,16,17,19,21 177g

Campagnolo Chorus 11sp CassetteOptimized 11-speed tooth design for shifting speed •and fluidity. Evolved sprocket timing reduces stress on the chain and allows for easier shifting through the higher cogsTop six cogs are divided into sets of three and are mounted •on aluminum carriers. This increases rigidity by 180% and the individual cogs are 70% more resistant to torsionCogs are steel with a nickel-chrome treatment•11-speed cassettes fit Campagnolo 9-11 speed freehubs•Light alloy lockrings only supplied with 11t cogsets •(12t+ lockrings sold separately). 236g

part# material speed range cogs CP-35241 NiCr C-11sp 11-23t 11,12,13,14,15,16,17,18,19,21,23 CP-35242 NiCr C-11sp 11-25t 11,12,13,14,15,16,17,19,21,23,25 CP-35244 NiCr C-11sp 12-25t 12,13,14,15,16,17,18,19,21,23,25 CP-35246 NiCr C-11sp 12-27t 12,13,14,15,16,17,19,21,23,25,27 CP-35248 NiCr C-11sp 12-29t 12,13,14,15,17,19,21,23,25,27,29

Campagnolo Centaur Ultra-Drive 10sp CassetteUltra Drive design to optimize shifting performance•Synchronized sprockets for fast, precise shifting•Cogs are steel with a Chrome plated treatment for extended life•Ultra-Drive 10-speed compatible fits Campagnolo 9/10-speed freehubs•Lockrings included. 245g (11-25t)•

part# speed range cogs CP-35341 C-10sp 11-23t 11,12,13,14,15,16,17,19,21,23 CP-35342 C-10sp 11-25t 11,12,13,14,15,17,19,21,23,25 CP-35344 C-10sp 12-25t 12,13,14,15,16,17,19,21,23,25 CP-35345 C-10sp 13-26t 13,14,15,16,17,18,19,21,23,26 CP-35346 C-10sp 13-29t 13,14,15,16,17,19,21,23,26,29 CP-35347 C-10sp 14-23t 14,15,16,17,18,19,20,21,22,23

Campagnolo Veloce Ultra-Drive 10sp Cassette

Ultra Drive design to optimize shifting performance•Cogs are steel with a galvanized treatment•Ultra-Drive 10-speed compatible, fits Campagnolo 9/10-speed freehubs•Lockrings included. 250g•

part# speed range cogs CP-35423 C-10sp 11-25t 11,12,13,14,15,17,19,21,23,25 CP-35424 C-10sp 12-23t 12,13,14,15,16,17,18,19,21,23 CP-35425 C-10sp 12-25t 12,13,14,15,16,17,19,21,23,25 CP-35426 C-10sp 13-26t 13,14,15,16,17,18,19,21,23,26 CP-35427 C-10sp 13-29t 13,14,15,16,17,19,21,23,26,29

Campagnolo Veloce Ultra-Drive 9sp CassetteUltra-Drive 9-speed compatible, fits Campagnolo 9/10-speed freehubs•NiCr: nickel-chromed steel cogs with weight reducing cutouts•12t+ lockrings sold separately•

part# speed range cogs weight CP-35441 C-9sp 12-23t 12,13,14,15,16,17,19,21,23 215g CP-35442 C-9sp 13-23t 13,14,15,16,17,18,19,21,23 225g CP-35443 C-9sp 13-26t 13,14,15,16,17,19,21,23,26 260g CP-35444 C-9sp 13-28t 13,14,15,17,19,21,23,25,28 310g CP-35445 C-9sp 14-28t 14,15,16,17,19,21,23,25,28 320g

Campagnolo Cassette Lockringspart# model compatibility description CP-37011 11sp Campy 11 tooth alloy cassette lockring CP-37012 11sp Campy 12 tooth alloy cassette lockring CP-37111 10sp Campy 11 tooth alloy cassette lockring CP-37112 10sp Campy 12 tooth alloy cassette lockring CP-37115 10sp Campy 12 tooth titanium cassette lockring

Campagnolo Chorus 11sp Cassette

Campagnolo Centaur Ultra-Drive 10sp Cassette



Campagnolo Cassette Lockrings

Campagnolo Ghibli Cassette

373

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

CO

MP

ON

ENTS

& P

AR

TS


Interloc Elite Road Campy 11sp Cassette

Nickel-chrome plated steel cogs, alloy and resin spacers•Alloy spider holds the 4 largest cogs. 11sp Campagnolo compatible•

part# speed range cogs weight RD-2941 11sp 11-30t 11,12,13,15,17,19,21,23,25,27,30 360g

Interloc Elite Road Campy 10sp CassetteNickel-chrome plated steel cogs, alloy and resin spacers•Alloy spider holds the 4 largest cogs. 10sp Campagnolo compatible•

part# speed range cogs weight RD-2972 10sp 11-28t 11,12,13,15,17,19,21,23,25,28 330g RD-2983 10sp 11-32t 11,13,15,17,19,21,23,25,28,32 355g RD-2985 10sp 11-34t 11,13,15,17,19,21,23,25,28,34 363g RD-2978 10sp 12-28t 12,13,14,15,17,19,21,23,25,28 340g RD-2981 10sp 12-32t 12,13,15,17,19,21,23,25,28,32 350g

Interloc Elite Road/MTB Shimano 10sp CassetteNickel-chrome plated steel cogs, alloy and resin spacers•Alloy spider holds the 4 largest cogs•10sp Shimano compatible, for use on 8/9 speed freehub bodies•30/32/34t: use with MTB rear derailleur•

part# speed range cogs weight RD-2964 10sp 11-28t 11,12,13,15,17,19,21,23,25,28 250g RD-2989 10sp 11-30t 11,13,15,17,19,21,23,25,28,30 355g RD-2990 10sp 11-32t 11,13,15,17,19,21,23,25,28,32 355g RD-2992 10sp 11-34t 11,13,15,17,19,21,23,25,28,34 363g RD-2970 10sp 12-28t 12,13,14,15,17,19,21,23,25,28 291g RD-2995 10sp 12-30t 12,13,15,17,19,21,23,25,28,30 355g RD-2996 10sp 12-32t 12,13,15,17,19,21,23,25,28,32 355g

Interloc Elite Road 9sp Cassette

Nickel-chrome plated steel cogs, alloy and resin spacers•Alloy spider holds the 4 largest cogs•9-speed Shimano compatible, fits Shimano 8-10 speed freehubs•

part# speed range cogs weight RD-2951 9sp 11-28t 11,12,14,16,18,20,22,25,28 277g RD-2952 9sp 12-28t 12,13,15,17,19,21,23,25,28 297g

Shimano Dura-Ace 7900 10sp Ti Cassette10-speed Super Narrow HyperGlide compatible cassette with •titanium and nickel-coated steel cogs for precision and durabilityDual, 6-arm aluminum carrier design reduces weight and increases stiffness•5 largest cogs mounted to carriers with 4 largest cogs in titanium•163g @ 11-23t•

part# speed range cogs SH-35130 10sp 11-21t 11,12,13,14,15,16,17,18,19,21 SH-35131 10sp 11-23t 11,12,13,14,15,16,17,19,21,23 SH-35132 10sp 11-25t 11,12,13,14,15,17,19,21,23,25 SH-35133 10sp 11-27t 11,12,13,14,15,17,19,21,24,27 SH-35134 10sp 11-28t 11,12,13,14,15,17,19,21,24,28 SH-35135 10sp 12-23t 12,13,14,15,16,17,18,19,21,23 SH-35136 10sp 12-25t 12,13,14,15,16,17,19,21,23,25 SH-35137 10sp 12-27t 12,13,14,15,16,17,19,21,24,27

Shimano Dura-Ace 7700 9sp Ti Cassette9-speed Super Narrow HyperGlide compatible cassette•6-arm aluminum dual carrier reduces weight and increases stiffness•11T range: 4 largest cogs mounted to carriers (2 largest cogs, titanium)•12T range: 5 largest cogs mounted to carriers (3 largest cogs, titanium)•Other cogs are nickel plated steel for increased durability•

part# speed range cogs weight SH-35111 9sp 11-21t 11,12,13,14,15,16,17,19,21 150g SH-35113 9sp 11-23t 11,12,13,14,15,17,19,21,23 155g SH-35121 9sp 12-21t 12,13,14,15,16,17,18,19,21 155g SH-35123 9sp 12-23t 12,13,14,15,16,17,19,21,23 160g SH-35125 9sp 12-25t 12,13,14,15,17,19,21,23,25 170g SH-35127 9sp 12-27t 12,13,14,15,17,19,21,24,27 175g

Interloc Elite Road 9sp Cassette

Interloc Elite Road Campy 11sp Cassette

Interloc Elite Road/MTB Shimano 10sp Cassette

Interloc Elite RoadCampy 10sp Cassette

Shimano Dura-Ace 790010sp Ti Cassette

Shimano Dura-Ace 77009sp Ti Cassette

374

COM

PO

NEN

TS

& PA

RTS

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels


Shimano Ultegra 6600 10sp Cassette

10-speed Super Narrow HyperGlide compatible cassette •(remaining ranges also compatible with newer Ultegra-6700 drivetrain)Fits 9-speed spacing (older 9sp freehubs require spline shim)•Single, 6-arm aluminum carrier (3 largest cogs) •reduces weight and increases stiffnessNickel plated steel cogs for increased durability•235g @ 12-23t•

part# speed range cogs SH-35255 10sp 13-25t 13,14,15,16,17,18,19,21,23,25 SH-35256 10sp 14-25t 14,15,16,17,18,19,20,21,23,25 SH-35257 10sp 15-25t 15,16,17,18,19,20,21,22,23,25 SH-35258 10sp 16-27t 16,17,18,19,20,21,22,23,25,27

Shimano Ultegra 6700 10sp Cassette10-speed Super Narrow HyperGlide compatible cassette •(compatible with older Ultegra-6600 10-speed systems)Fits 9 speed spacing (older 9sp freehubs require spline shim)•Single, 6-arm aluminum carrier (3 largest cogs) •reduces weight and increases stiffnessNickel plated steel cogs for increased durability •with an aluminum lockring210g @ 11-23t (see 6600 cassettes for junior •and alternate sizes not available in 6700 model)

part# speed range cogs SH-35246 10sp 11-23t 11,12,13,14,15,16,17,19,21,23 SH-35247 10sp 11-25t 11,12,13,14,15,17,19,21,23,25 SH-35248 10sp 11-28t 11,12,13,14,15,17,19,21,24,28 SH-35249 10sp 12-23t 12,13,14,15,16,17,18,19,21,23 SH-35250 10sp 12-25t 12,13,14,15,16,17,19,21,23,25 Shimano Ultegra 6500 9sp Cassette

Three largest sprockets are mounted to an alloy carrier to reduce weight•Computer designed HyperGlide shift ramps and •tooth profiling for faster and more precise shiftsChrome plated steel cogs for increased durability•

part# speed range cogs weight SH-35211 9sp 11-21t 11,12,13,14,15,16,17,19,21 176g SH-35213 9sp 11-23t 11,12,13,14,15,17,19,21,23 190g SH-35221 9sp 12-21t 12,13,14,15,16,17,18,19,21 196g SH-35223 9sp 12-23t 12,13,14,15,16,17,19,21,23 202g SH-35225 9sp 12-25t 12,13,14,15,17,19,21,23,25 217g SH-35227 9sp 12-27t 12,13,14,15,17,19,21,24,27 224g SH-35233 9sp 13-23t 13,14,15,16,17,18,19,21,23 230g SH-35235 9sp 13-25t 13,14,15,16,17,19,21,23,25 235g SH-35245 9sp 14-25t 14,15,16,17,18,19,21,23,25 240g

Shimano 105 5700 10sp Cassette10-speed Super Narrow HyperGlide compatible cassette•Fits 9-speed spacing (older 9sp freehubs may require spline shim)•Single, 6-arm aluminum carrier (3 largest cogs) reduces weight •and increases stiffnessNickel plated steel cogs for increased durability•245g @ 11-25t•

part# speed range cogs SH-35305 10sp 11-25t 11,12,13,14,15,17,19,21,23,25 SH-35306 10sp 11-28t 11,12,13,14,15,17,19,21,24,28 SH-35307 10sp 12-25t 12,13,14,15,16,17,19,21,23,25 SH-35308 10sp 12-27t 12,13,14,15,16,17,19,21,24,27

Shimano HG70 7/8sp CassetteComputer designed HyperGlide shift ramps •and tooth profiling for faster, more precise shifts

part# speed range cogs weight SH-35818 8sp 11-28t 11,12,14,16,18,21,24,28 326g SH-35819 8sp 11-30t 11,13,15,17,20,23,26,30 362g SH-35850 7sp 11-28t 11,13,15,18,21,24,28 310g

Shimano 105 5700 10sp Cassette

Shimano Ultegra 670010sp Cassette

Shimano Ultegra 6500 9sp Cassette

Shimano Ultegra 660010sp Cassette

Shimano HG707/8sp Cassette

375

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

CO

MP

ON

ENTS

& P

AR

TS


Shimano XTR M980 10sp Cassette

Redesigned tooth profile for Dyna-Sys (HG-X)10-speed mountain drivetrains•Nickel plated small cogs with titanium middle/large cogs provide a balanced •level of shifting performance and durability (includes alloy HG lockring)3-section aluminum spider design: dual, 5-arm aluminum carriers with •a middle 4-arm carrier reduce weight and increase stiffness6 largest cogs mounted to carriers (5 largest cogs, titanium)•

part# speed range cogs weight SH-35510 10sp 11-34t 11,13,15,17,19,21,23,26,30,34 255g SH-35511 10sp 11-36t 11,13,15,17,19,21,24,28,32,36 275g

Shimano XTR M970 9sp Ti CassetteRe-profiled HyperGlide 9sp design for optimized shifting performance•Triple, 5-arm aluminum carriers reduce weight and increase stiffness•6 largest cogs mounted to carriers (4 largest cogs, titanium)•

part# speed range cogs weight SH-35517 9sp 11-32t 11,12,14,16,18,21,24,28,32 225g SH-35518 9sp 11-34t 11,13,15,17,20,23,26,30,34 245g SH-35519 9sp 12-34t 12,14,16,18,20,23,26,30,34 250g Shimano XT M771 10sp Cassette

Specifically designed for Dyna-Sys (HG-X)10-speed mountain drivetrains•Shot-peened, chrome plated steel with a double-rivet •large cog for increased stiffness and durability6 largest cogs are mounted to twin, 5-arm alloy •carriers, plus an alloy lockring for reduced weightComputer designed HyperGlide shift ramps •and tooth profiling for faster, more precise shifts

part# speed range cogs weight SH-35601 10sp 11-32t 11,12,14,16,18,20,22,25,28,32 285g SH-35602 10sp 11-34t 11,13,15,17,19,21,23,26,30,34 320g SH-35603 10sp 11-36t 11,13,15,17,19,21,24,28,32,36 350g

Shimano XT M770 9sp CassetteChrome plated steel cogs for increased stiffness with alloy lockring•6 largest sprockets are mounted to a 5-arm alloy carrier for reduced •weight (5 largest sprockets and 4-arm spider on 11-32t version)Computer designed HyperGlide shift ramps and tooth profiling •for faster, more precise shiftsDouble-rivet pins on back side of largest cog •help prevent overshift spoke damage

part# speed range cogs weight SH-35638 9sp 11-32t 11,12,14,16,18,21,24,28,32 265g SH-35639 9sp 11-34t 11,13,15,17,20,23,26,30,34 300g

Shimano HG81 (SLX) 10sp CassetteSpecifically designed for DynaSys 10-speed mountain drivetrains•Shot-peened, chrome (3 largest) and nickel (7 smallest) •plated steel cogs for increased strength and longevity3 largest sprockets are mounted to an alloy carrier, •plus an alloy lockring for reduced weightComputer designed HyperGlide shift ramps •and tooth profiling for faster, more precise shifts

part# speed range cogs weight SH-35703 10sp 11-34t 11,13,15,17,19,21,23,26,30,34 345g SH-35704 10sp 11-36t 11,13,15,17,19,21,24,28,32,36 370g

Shimano HG80 (Saint/SLX) 9sp CassetteShot-chrome (3 largest) and shot-nickel (6 smallest) •plated steel cogs for increased strength and longevity3 largest sprockets are mounted to an alloy carrier for reduced weight•Computer designed HyperGlide shift ramps •and tooth profiling for faster, more precise shifts*11-28t not compatible with SLX Shadow rear derailleurs •(min 32t largest sprocket required)

part# speed range cogs weight SH-35705 9sp *11-28t 11,12,13,14,16,18,21,24,28 245g SH-35706 9sp 11-32t 11,12,14,16,18,21,24,28,32 280g SH-35707 9sp 11-34t 11,13,15,17,20,23,26,30,34 315g

Shimano XTR M980 10sp Cassette

Shimano XT M771 10sp Cassette

Shimano XT M770 9sp Cassette

Shimano XTR M9709sp Ti Cassette

Shimano HG81 (SLX) 10sp Cassette

Shimano HG80 (Saint/SLX) 9sp Cassette

376

COM

PO

NEN

TS

& PA

RTS

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels


Shimano HG61 (LX/Deore) 9sp Cassette

Shot-nickel plated steel cogs with close ratio / wide range Mega 9 speed gearing•Computer designed HyperGlide shift ramps •and tooth profiling for faster, more precise shifts*12-36t version designed specifically for 29” wheel MTB applications (not •recommended for use on 26” MTB wheels due to extra torque on system)

part# speed range cogs weight SH-35708 9sp 11-28t 11,12,13,14,16,18,21,24,28 325g SH-35709 9sp 11-32t 11,12,14,16,18,21,24,28,32 340g SH-35710 9sp 11-34t 11,13,15,17,20,23,26,30,34 390g SH-35711 9sp 12-36t *(29”) 12,14,16,18,21,24,28,32,36 425g

Shimano HG50 8/9sp CassetteComputer designed HyperGlide shift ramps •and tooth profiling for faster, more precise shifts

part# speed range cogs weight SH-35450 9sp (Tiagra, 105) 11-25t 11,12,13,15,17,19,21,23,25 215g SH-35451 9sp (Tiagra, 105) 12-23t 12,13,14,15,16,17,19,21,23 215g SH-35452 9sp (Tiagra, 105) 12-25t 12,13,14,15,17,19,21,23,25 235g SH-35453 9sp (Tiagra, 105) 13-25t 13,14,15,16,17,18,21,23,25 250g SH-35454 9sp (Tiagra, 105) 14-25t 14,15,16,17,18,19,21,23,25 255g SH-35822 9sp (Deore) 11-32t 11,12,14,16,18,21,24,28,32 365g SH-35823 9sp (Deore) 11-34t 11,13,15,17,20,23,26,30,34 440g SH-35456 8sp (Sora) 12-21t 12,16,14,15,16,17,19,21 250g SH-35457 8sp (Sora) 12-23t 12,13,14,15,17,19,21,23 280g SH-35458 8sp (Sora) 12-25t 12,13,15,17,19,21,23,25 320g SH-35459 8sp (Sora) 13-26t 13,14,15,17,19,21,23,26 340g SH-35829 8sp (Alivio) 11-28t 11,13,15,17,19,21,24,28 360g SH-35830 8sp (Alivio) 11-30t 11,13,15,17,20,23,26,30 365g SH-35831 8sp (Alivio) 11-32t 11,13,15,18,21,24,28,32 365g

Shimano HG40 8sp CassetteComputer designed HyperGlide shift ramps •and tooth profiling for faster, more precise shiftsDrilled and plated steel cogs for reduced weight and long life•

part# speed range cogs weight SH-35838 8sp 11-30t 11,13,15,17,20,23,26,30 325g

Shimano HyperGlide Cassette LockringTooth designation indicates smallest cog used on cassette •(12t+ for 12,13,14t starting position)

part# description application/material SH-37101 8-10 speed lockring 11t/aluminum SH-37102 8-10 speed lockring 12t+/aluminum SH-37211 6-10 speed lockring 11t/steel SH-37212 6-10 speed lockring 12t+/steel

SRAM OG-1090 10sp CassetteSuperlight PowerDome construction: one-piece forged and •CNC-machined of heat treated chromoly steel, then capped with an electroless nickel finish providing a 35% harder material than titaniumOpenGlide tooth profiling designed for optimal shifting performance•Fits 8/9/10sp* Shimano-spline freehub bodies for 10-speed shifting/spacing •*(does not fit DuraAce 10sp aluminum freehub bodies)Includes anodized 7000-series aluminum lockring•

part# speed range cogs weight GS-8802 10sp 11-23t 11,12,13,14,15,16,17,19,21,23 155g GS-8804 10sp 11-25t 11,12,13,14,15,17,19,21,23,25 164g GS-8805 10sp 11-26t 11,12,13,14,15,17,19,21,23,26 166g GS-8807 10sp 11-28t 11,12,13,14,15,17,19,22,25,28 169g

Shimano HG61 (LX/Deore) 9sp Cassette

Shimano HG50 8/9sp Cassette

Shimano HG40 8sp Cassette

Shimano HyperGlide Cassette Lockring

SRAM OG-1090 10sp Cassette

377

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

CO

MP

ON

ENTS

& P

AR

TS


SRAM XG-1099 (XX) X-Dome 10sp Cassette

Superlight, 1-piece open design X-Dome construction (8 middle cogs): CNC-•machined from billet 4130 chromoly steel with weight-reducing and mud-evacuating ports throughout the range (9 hour process)Largest cog is machined from 7075-T6 aluminum and interfaces with the •X-Dome steel cogs to function as a structural unitX-Glide tooth profiling designed for optimized shifting performance•Fits 8/9/10sp SRAM/Shimano-spline freehub bodies for 10-speed shifting/spacing•Includes silver-anodized 7075-T6 aluminum lockring•

part# speed range cogs weight GS-2678 10sp 11-32t 11,12,14,16,18,20,22,25,28,32 185g GS-2679 10sp 11-36t 11,12,14,16,18,21,24,28,32,36 208g

SRAM XG-999 X-Dome 9sp CassetteSuperlight, 1-piece open design X-Dome construction (7 middle cogs): •CNC-machined from billet 4140 chromoly steel with weight-reducing and mud-evacuating ports throughout the range (a 9 hour process)Largest cog (replaceable) is machined from 7075-T6 aluminum and •interfaces with the X-Dome steel cogs to function as a structural unitX-Glide tooth profiling designed for optimized shifting performance•Fits 8/9/10sp SRAM/Shimano-spline freehub bodies for 9-speed shifting/spacing•Includes silver-anodized 7075-T6 aluminum lockring•

part# speed range cogs weight GS-2697 9sp 11-32t 11,12,14,16,18,21,24,28,32 175g

SRAM XG-1080 10sp CassetteIndividual, nickel plated CrMo steel (11-32) and 7075 aluminum •(36) cogs, incorporating weight-reduction ports and a spline+pinned retention system for a lightweight, flex-free systemX-Glide tooth profiling designed for optimized shifting performance•Fits 8/9/10sp SRAM/Shimano-spline freehub bodies •for 10-speed shifting/spacingIncludes silver-anodized 7075-T6 aluminum lockring•

part# speed range cogs weight GS-2675 10sp 11-36t 11,12,14,16,18,21,24,28,32,36 239g

SRAM PG-1070 10sp Cassette

Lightweight, semi-spidered construction with durable, •blast/heat-treated steel cogs and weight reduction ports throughout the range (three largest cogs fixed to spider)PowerGlide tooth profiling designed for optimal shifting performance •(11-32t/12-36t additions for use with mountain 10-speed derailleurs, or 11-32t with Rival/Apex road medium cage derailleurs)Fits 8/9/10sp* SRAM/Shimano-spline freehub bodies for 10-speed shifting/•spacing *(does not fit DuraAce 10sp aluminum freehub bodies)Includes silver-anodized 7000-series aluminum lockring•

part# speed range cogs weight GS-8821 10sp 11-23t 11,12,13,14,15,16,17,19,21,23 210g GS-8822 10sp 11-25t 11,12,13,14,15,17,19,21,23,25 225g GS-8823 10sp 11-26t 11,12,13,14,15,17,19,21,23,26 230g GS-8824 10sp 11-28t 11,12,13,14,15,17,19,22,25,28 240g GS-2690 10sp 11-32t 11,12,13,15,17,19,22,25,28,32 255g GS-8825 10sp 12-25t 12,13,14,15,16,17,19,21,23,25 235g GS-8826 10sp 12-26t 12,13,14,15,16,17,19,21,23,26 240g GS-8827 10sp 12-27t 12,13,14,15,16,17,19,21,24,27 245g GS-2691 10sp 12-36t 12,13,15,17,19,22,25,28,32,36 270g


SRAM XG-1099 (XX) X-Dome 10sp Cassette

SRAM XG-1080 10sp Cassette

SRAM XG-999 X-Dome 9sp Cassette

378

COM

PO

NEN

TS

& PA

RTS

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels


SRAM PG-990 (Select) 9sp Cassette

Lightweight, (Select) color-anodized, CNC-aluminum 5-arm spider with •durable blast-chrome plated steel cogs and weight reduction windowsLargest cogs attached to spider (5 on 11-32t, 6 on 11-34t)•PowerGlide-II tooth profiling designed for optimal shifting performance•Fits 8/9sp Shimano-spline freehub bodies for 9-speed shifting/spacing•Includes silver-anodized 7000-series aluminum lockring•

part# speed range cogs weight color GS-2680 9sp 11-32t 11,12,14,16,18,21,24,28,32 275g red (Redwin) GS-2682 9sp 11-32t 11,12,14,16,18,21,24,28,32 275g gold (Nugget) GS-2681 9sp 11-34t 11,13,15,17,20,23,26,30,34 305g red (Redwin) GS-2683 9sp 11-34t 11,13,15,17,20,23,26,30,34 305g gold (Nugget)

SRAM PG-1050 10sp CassetteSemi-spidered construction with durable, blast/heat-treated steel cogs and •weight reduction ports throughout the range (three largest cogs fixed to spider)PowerGlide tooth profiling designed for smooth/fast shifting performance •(11-32t/12-36t additions for use with mountain 10-speed derailleurs, or 11-32t with Rival/Apex road medium cage derailleurs)Fits 8/9/10sp* SRAM/Shimano-spline freehub bodies for 10-speed shifting/•spacing *(does not fit DuraAce 10sp aluminum freehub bodies)Includes black steel lockring•

part# speed range cogs weight GS-8830 10sp 11-23t 11,12,13,14,15,16,17,19,21,23 250g GS-8831 10sp 11-26t 11,12,13,14,15,17,19,21,23,26 270g GS-8832 10sp 11-28t 11,12,13,14,15,17,19,22,25,28 285g GS-2692 10sp 11-32t 11,12,13,15,17,19,22,25,28,32 299g GS-2693 10sp 12-36t 12,13,15,17,19,22,25,28,32,36 315g

SRAM PG-980 9sp CassetteLightweight aluminum 5-arm spider with durable blast-chrome •plated steel cogs and weight reduction windowsPowerGlide-II tooth profiling designed for optimal shifting performance•Fits 8/9sp Shimano-spline freehub bodies for 9-speed shifting/spacing•Includes chrome-plated satin lockring•

part# speed range cogs weight GS-2694 9sp 11-32t 11,12,14,16,18,21,24,28,32 280g GS-2695 9sp 11-34t 11,13,15,17,20,23,26,30,34 310g

SRAM PG-970 9sp CassetteHeat-treated SAPH-440 steel cogs with weight reduction windows•Shimano Hyperglide compatible spacing, fits Shimano freehub bodies•Tooth profiling designed for optimal performance in combination •with SRAM Power Chains

part# speed range cogs weight GS-200043 9sp 11-21t 11,12,13,14,15,16,17,19,21 200g GS-200044 9sp 11-23t 11,12,13,14,15,17,19,21,23 205g GS-200278 9sp 12-23t 12,13,14,15,16,17,19,21,23 210g GS-200279 9sp 12-26t 12,13,14,15,17,19,21,23,26 240g GS-2413 9sp 11-26t (DH) 11,12,13,15,17,19,21,23,26 235g >>> designed for downhill applicationsGS-200393 9sp 11-32t 11,12,14,16,18,21,24,28,32 330g GS-200394 9sp 11-34t 11,13,15,17,20,23,26,30,34 340g

SRAM PG-950 9sp CassetteDurable heat-treated steel cogs with weight reduction windows•Shimano Hyperglide compatible spacing, fits Shimano HG freehub bodies•Tooth profiling designed for optimal performance when used in combination •with SRAM Power Chains

part# speed range cogs weight GS-2291 9sp 12-23t 12,13,14,15,16,17,19,21,23 220g GS-2292 9sp 12-26t 12,13,14,15,17,19,21,23,26 240g GS-2290 9sp 11-26t 11,12,13,15,17,19,21,23,26 220g GS-2289 9sp 11-28t 11,12,13,14,16,18,21,24,28 250g GS-200289 9sp 11-32t 11,12,14,16,18,21,24,28,32 380g GS-200290 9sp 11-34t 11,13,15,17,20,23,26,30,34 470g

SRAM PG-990 (Select) 9sp Cassette





379

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

CO

MP

ON

ENTS

& P

AR

TS

7-8 speed cassettes


Durable heat-treated steel cogs with weight reduction windows•Shimano Hyperglide compatible spacing, fits Shimano freehub bodies•Tooth profiling designed for optimal performance in combination •with SRAM Power Chains

part# speed range cogs weight GS-2366 8sp 12-23t 12,13,14,15,17,19,21,23 220g GS-2367 8sp 12-26t 12,13,15,17,19,21,23,26 230g GS-200395 8sp 11-28t 11,12,14,16,18,21,24,28 250g GS-200330 8sp 11-30t 11,13,15,17,20,23,26,30 310g GS-200396 8sp 11-32t 11,12,15,16,18,21,26,32 280g

SRAM PG-830 8sp CassetteDurable heat-treated steel cogs with weight reduction windows•Shimano Hyperglide compatible spacing, fits Shimano freehub bodies•Tooth profiling designed for optimal performance when used in combination •with SRAM Power Chains

part# speed range cogs weight GS-2041 8sp 11-28t 11,12,14,16,18,21,24,28 280g GS-2042 8sp 11-30t 11,13,15,17,20,23,26,30 320g GS-2043 8sp 11-32t 11,12,14,16,18,21,26,32 340g

SRAM PG-820 8sp CassetteDuraBlast (black) steel cogs with weight reduction ports•Shimano/SRAM compatible spacing, fits Shimano/SRAM freehub bodies•Tooth profiling designed for optimal performance when used in combination •with SRAM Power Chains

part# speed range cogs weight GS-2054 8sp 11-28t 11,12,14,16,18,21,24,28 295g GS-2055 8sp 11-30t 11,13,15,17,20,23,26,30 300g GS-2056 8sp 11-32t 11,12,14,16,18,21,26,32 305g

SRAM PG-730 7sp CassetteDurable heat-treated steel cogs with weight reduction windows•Shimano Hyperglide compatible spacing, fits Shimano freehub bodies•Tooth profiling designed for optimal performance in combination •with SRAM Power Chains

part# speed range cogs weight GS-200293 7sp 12-32t 12,14,16,18,21,26,32 310g

SRAM XX/Open/Power-Glide LockringXX, OpenGlide, or PowerGlide lockring with crush-washer for •cassettes that use an 11 or 12 tooth cog in the 1st position10sp XX: aluminum construction for a 11 tooth first position cog•10sp OpenGlide: aluminum construction (OG-1070 and OG-1090 levels)•9sp PowerGlide-II style: 11t red aluminum (PG-990 level), silver aluminum •(PG-970 level), or black steel (PG-950 level)

part# description color (material) GS-2280 XX 10sp lockring, 11t silver (alloy) GS-2284 OG-1090 10sp lockring, 11t silver (alloy) GS-2285 OG/PG-1070 10sp lockring, 11t silver (alloy) GS-2286 OG/PG-1070 10sp lockring, 12t silver (alloy) GS-2283 PowerGlide 7-9sp lockring, 11t red (alloy) GS-2281 PowerGlide 7-9sp,lockring, 11t silver (alloy) GS-2282 PowerGlide 7-9sp lockring, 12t silver (alloy) GS-2287 PowerGlide 7-9sp,lockring, 11t black (steel) GS-2288 PowerGlide 7-9sp,lockring, 12t black (steel)



SRAM Power/Open-Glide Lockring



380

COM

PO

NEN

TS

& PA

RTS

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

cassettes freewheels

ACS Crossfire FreewheelDurable cold forged CNC machined freewheel•3 pawl engagement for stronger hold with engagement every 12 degrees•New removal notch pattern allows for better frame clearance•

part# teeth size thread color AM-5101 13t 3/32” 30x1mm gun metal AM-5103 14t 3/32” 30x1mm gun metal AM-5105 15t 3/32” 30x1mm gun metal AM-5107 16t 3/32” 30x1mm gun metal AM-5109 17t 3/32” 30x1mm gun metal AM-5111 18t 3/32” 30x1mm gun metal AM-5113 19t 3/32” 30x1mm gun metal AM-5115 20t 3/32” 30x1mm gun metal AM-5117 22t 3/32” 30x1mm gun metal

ACS FatClaws FreewheelDurable CrMo construction with 4-pawl internal engagement system•Thicker teeth hold heavy-duty chains for skate park grinding•Maintain with petroleum based lubricant (no wax/Teflon)•

part# teeth size thread color AM-5130 14t 1/8” 1.37”x24tpi black/gold AM-5132 16t 1/8” 1.37”x24tpi black/gold

ACS Claws Southpaw FreewheelDurable CrMo construction with 4-pawl internal engagement system•Fits left-threaded hubs only (allows mounting drivetrain •on left side of bike for grinding on the right side)Maintain with petroleum based lubricant (no wax/Teflon)•

part# teeth size thread color AM-5140 14t 1/8” reverse 1.37”x24tpi black/gold AM-5142 16t 1/8” reverse 1.37”x24tpi black/gold

Shimano MX30 1-Speed FreewheelDesigned for 3/32” and 1/8” chains•

part# teeth size thread color SH-36010 16t 3/32” 1.37” x 24tpi black/chrome SH-36011 17t 3/32” 1.37” x 24tpi black/chrome SH-36012 18t 3/32” 1.37” x 24tpi black/chrome

Interloc Defiant 5,6,7sp FreewheelsNice enough to put on a vintage Cinelli road bike •but affordable enough to use as standard replacementsNickel plated cogs with index shifting waves and special teeth profiles•Double pawl mechanism with 20 interface ratchets•Double row precision bearings and labyrinth seals•Stack height: 5-spd: 29.2mm, 6-spd: 31.5mm, 7-spd: 34.1mm•

part# speed range cogs weight RD-2854 5sp 13-28t 13,16,20,24,28 426g RD-2856 5sp 13-32t 13,16,20,24,32 426g RD-2858 5sp 14-28t 14,16,20,24,28 426g RD-2864 6sp 13-28t 13,15,18,21,24,28 469g RD-2868 6sp 14-32t 14,17,20,24,28,32 469g RD-2869 6sp 14-34t Mega-R 14,16,19,24,28,34 469g RD-2874 7sp 13-28t 13,15,17,19,21,24,28 558g RD-2877 7sp 13-32t 13,15,18,21,24,28,32 558g

Shimano MX30 1-Speed Freewheel

ACS Claws Freewheel

ACS FatClaws Freewheel

ACS Claws Southpaw Freewheel

Interloc Defiant 5,6,7sp Freewheels

381

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

CO

MP

ON

ENTS

& P

AR

TS

single speed cogs & spacers cassettes

Atomlab Single Speed Conversion KitConverts an 8-9sp HG splined cassette hub to a single speed•Includes a 13t, 14t and 16t cog, (2) spacers, and (1) lockring. 100g•

part# description AL-2951 single speed conversion kit

DMR SS Conversion & TensionerSTS chain tensioner packaged with a 16t HG cog, lockring and •three various-width spacers to convert any 8/9sp cassette hubSimple Tension Seeker (STS) allows the use of a 1-speed drivetrain •on a vertical dropout frame, maintains chain tensionStainless steel arm mounts to derailleur hanger and dropout•Loosen bolt and swing down and back to adjust chain tension•High density polyurethane pulley with sealed cartridge bearings•

part# description DM-1557 single speed conversion kit with tensioner, silver DM-1558 single speed conversion kit with tensioner, red

Endless Bike Kick Ass CogMachined 7075-T6 aluminum singlespeed cogs•Wide base prevents the cog from digging into •freehub bodies and greatly reduces flexSplines are precision machined for perfect alignment •and fit on all mountain cassette hubsThe shape, width, and height of the teeth are CAD designed •and optimized for single speed use with 1/8” or 3/32” chains. The design offers more contact with the chain rollers for better wear resistance of both the cog and the chainPositive engagement prevents chain slippage, •and makes for a very quiet drivetrain

part# material teeth EL-4414 aluminum 14t EL-4415 aluminum 15t EL-4416 aluminum 16t EL-4417 aluminum 17t EL-4418 aluminum 18t EL-4419 aluminum 19t EL-4420 aluminum 20t EL-4421 aluminum 21t EL-4422 aluminum 22t EL-4423 aluminum 23t EL-4424 aluminum 24t EL-4425 aluminum 25t

Endless Bike Fibonacci 1-Speed Spacer KitSingle speed conversion with different size machined aluminum •spacers allowing plenty of chain line adjustment (+/- 1mm)

part# includes EL-3400 8 different sized alloy spacers

Atomlab Single Speed Conversion Kit

DMR SS Conversion & Tensioner

Endless Bike Fibonacci 1-Speed Spacer Kit

Endless Bike Kick Ass Cog

382

COM

PO

NEN

TS

& PA

RTS

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

cassettes single speed

Gusset 66C Campagnolo SS Conversion

Converts any multi-speed Campy-splined cassette hub to a single speed•10mm wide steel cog spline spreads load over greater surface area, •preventing cog from deforming alloy freehub splineKit offers a degree of chainline adjustment by switching spacer position•Includes a drilled 18 tooth CrMo steel 5/64” cog, two drilled, splined alloy •spacers and a Campy lockring. 92g

part# description GU-1822 Campagnolo SS conversion, 18t

Gusset Double Six Single Speed ConversionOffers a lighter weight, compact-drive single speed•Converts any 8-9sp HG splined cassette hub to single speed•Extra wide spline interface prevents cog from deforming hub splines•Includes 1) CNC machined CrMo 1/2”x5/64” cog (either 12t or 16t), •2) black alloy spacers, 1) lockring

part# description GU-1800 single speed conversion kit, 12t GU-1801 single speed conversion kit, 16t

Gusset 1’er Single Speed ConversionConverts any 8-9sp HG splined cassette hub to a single speed•GU-1809: Micro 1er compact single speed conversion includes •12 and 13 tooth deep tooth CrMo steel 3/32” cogs, a 14mm spacer, a 19mm spacer and a lockringGU-1810: original 1er single speed conversion includes •16 and 18tooth deep tooth CrMo steel 3/32” cogs, a 14mm spacer, a 19mm spacer and a lockringSpacers can be swapped to fine tune chainline•

part# description GU-1809 Micro 1er single speed conversion, 12/13t GU-1810 1er single speed conversion, 16/18t

Gusset 66C Campagnolo Cog and LockringNon-drilled CrMo 5/64” cog for use with Campagnolo splined cassette hubs•10mm wide steel cog spline spreads load over greater surface area, •preventing cog from deforming alloy freehub spline. 64g (16t)Alloy lockring for Campy freehubs sold separate from cogs•

part# size teeth color GU-1824 5/64” 16t silver GU-1826 5/64” 18t silver GU-1829 lockring - black

Gusset Double Six Cog7mm thick CNC machined CrMo 1/2x5/64” cog •with HG spline, 9sp chain compatibleExtra wide spline interface prevents cog from deforming hub splines•

part# size teeth color GU-1802 5/64” 12t silver GU-1803 5/64” 13t silver GU-1804 5/64” 14t silver GU-1805 5/64” 15t silver GU-1806 5/64” 16t silver GU-1807 5/64” 17t silver GU-1808 5/64” 18t silver GU-18081 5/64” 19t silver

Gusset 332 Fixed CogCNC machined threaded steel track cog with chrome-plated finish•1.37”x24tpi (right handed) threads, 1/2” x 3/32” teeth (OK for 9sp chain)•

part# size teeth color GU-1769 3/32” 13t chrome GU-1770 3/32” 14t chrome GU-1771 3/32” 15t chrome GU-1780 3/32” 16t chrome GU-1781 3/32” 17t chrome GU-1790 3/32” 18t chrome

Gusset Double Six Cog

Gusset 332 Fixed Cog

Gusset Double Six Single Speed Conversion

Gusset 1’er Single Speed Conversion

Gusset 66C Campagnolo SS Conversion

Gusset 66C Campagnolo Cog and Lockring

383

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

CO

MP

ON

ENTS

& P

AR

TS

single speed & track cassettes

Gusset 332 Fixed Lockring

Gusset 332 Fixed Lockring

CNC machined threaded steel track lockring with chrome-plated finish•1.29”x24tpi (left handed) threads, 4-notch tool fitting•

part# description GU-1799 track lockring, 1.29”x24tpi LH

Gusset 1’er Steel CogSingle deep tooth CrMo 3/32” cog for use with HG splined cassette hubs•

part# size teeth color GU-1812 3/32” 12t satin ti GU-1813 3/32” 13t chrome GU-1814 3/32” 14t chrome GU-1816 3/32” 16t chrome GU-1818 3/32” 18t chrome GU-1820 3/32” 20t chrome

Halo DJD-BD Mini Driver/SprocketsCNC CrMo cogs to fit the DJD-Bush Drive rear hub drivers•HL-3278: Complete mini driver with integral 9 tooth cog•

part# size teeth color HL-3278 1/8” 9t driver black HL-3279 1/8” 9t sprocket black HL-3280 1/8” 10t sprocket black HL-3281 1/8” 11t sprocket black HL-3283 1/8” 13t sprocket black

Halo Fixed Cog and LockringCNC machined steel track cog with satin chrome or ED color coat finish•1.37”x24tpi (right handed) threads, 1/2” x 1/8” teeth•

part# size teeth color HL-3832 1/8” 15t silver HL-3834 1/8” 15t blue HL-3835 1/8” 15t red HL-3836 1/8” 15t purple HL-3837 1/8” 15t gold HL-3842 1/8” 16t silver HL-3844 1/8” 16t blue HL-3845 1/8” 16t red HL-3846 1/8” 16t purple HL-3847 1/8” 16t gold HL-3852 1/8” 17t silver HL-3854 1/8” 17t blue HL-3855 1/8” 17t red HL-3856 1/8” 17t purple HL-3857 1/8” 17t gold HL-3862 1/8” 18t silver HL-3864 1/8” 18t blue HL-3865 1/8” 18t red HL-3866 1/8” 18t purple HL-3867 1/8” 18t gold HL-3872 1/8” 19t silver HL-3874 1/8” 19t blue HL-3875 1/8” 19t red HL-3876 1/8” 19t purple HL-3877 1/8” 19t gold HL-3891 alloy lockring, 1.29”x24T - black HL-3894 alloy lockring, 1.29”x24T - blue HL-3895 alloy lockring, 1.29”x24T - red HL-3896 alloy lockring, 1.29”x24T - purple HL-3897 alloy lockring, 1.29”x24T - gold HL-3898 alloy lockring, 1.29”x24T - green HL-3899 steel lockring, 1.29”x24T - silver

Gusset 1’er Steel Cog

Halo DJD-BD Mini Driver/Sprockets

Halo Fixed Cog

Halo Alloy Lockring

384

COM

PO

NEN

TS

& PA

RTS

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

cassettes single speed & track

Paul Track Lock RingMachined stainless steel lock ring, extra wide to prevent stripping•Stepped inner edge to tighten even narrow cogs (minimum size 13t)•

part# description PC-3750 track lockring, 1.29”x24tpi LH

Rennen Single Speed Cog

Precision machined 7075-T6 aluminum cogs, compatible with 9sp chain•3/16” thick at the spline interface to assure the protection of aluminum •freehub bodiesSingle speed specific tooth profile designed to extend tooth life•Shimano HG spine and 8/9 speed compatible. 17g (16t)•

part# size teeth color RP-2014 3/32” 14t black RP-2015 3/32” 15t black RP-2016 3/32” 16t black RP-2017 3/32” 17t black RP-2018 3/32” 18t black RP-2019 3/32” 19t black RP-2020 3/32” 20t black RP-2021 3/32” 21t black RP-2022 3/32” 22t black RP-2023 3/32” 23t black RP-2024 3/32” 24t black RP-2025 3/32” 25t black

Rennen Single Speed Spacer KitA set of CNC machined threaded couplers, one on each side of the cog•To adjust the chainline, simply thread down one side and expand the other•Reverse threaded so that when the system is tightened down with the •included 7075-AL lockring the cog is secured in placeLaser etched graphics•

part# includes RP-1901 2 threaded couplers, 1 lockring

Shimano Dura-Ace 7600/7710 Track CogBlack CrMo with 1.37”x24tpi (right handed) threads•

part# size teeth color SH-31900 1.29”x24tpi LH lockring silver SH-31901 3/32” 13t black SH-31902 3/32” 14t black SH-31903 3/32” 15t black SH-31904 3/32” 16t black SH-31906 1/8” 13t black SH-31907 1/8” 14t black SH-31908 1/8” 15t black SH-31909 1/8” 16t black

Soma Chrome Track KogThreaded track cog for 1.37”x24tpi (right handed) threads•For 1/2” pitch x 3/32” width chains•CNC CrMo steel construction•Chrome-plated•

part# size teeth color SF-1705 3/32” 13t chrome SF-1706 3/32” 14t chrome SF-1707 3/32” 15t chrome SF-1708 3/32” 16t chrome SF-1709 3/32” 17t chrome SF-1710 3/32” 18t chrome SF-1711 3/32” 19t chrome SF-1712 3/32” 20t chrome SF-1713 3/32” 21t chrome

Paul Track Lock Ring

Rennen Single Speed Cog

Rennen Single Speed Spacer Kit

Shimano Dura-Ace 7600/7710 Track Cog

Soma Chrome Track Kog

Shimano Dura-Ace 7600/7710 Lockring

385

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

CO

MP

ON

ENTS

& P

AR

TS

single speed & track cassettes

Soma Track Kog

Threaded track cog for 1.37”x24tpi (right handed) threads•Choose 3/32” or 1/8” widths•CNC-machined from hardened chromoly•Phosphate black finish•

part# size teeth color SF-1730 3/32” 13t black SF-1731 3/32” 14t black SF-1732 3/32” 15t black SF-1733 3/32” 16t black SF-1734 3/32” 17t black SF-1735 3/32” 18t black SF-1736 3/32” 19t black SF-1737 3/32” 20t black SF-1738 3/32” 21t black SF-1740 1/8” 13t black SF-1741 1/8” 14t black SF-1742 1/8” 15t black SF-1743 1/8” 16t black SF-1744 1/8” 17t black SF-1745 1/8” 18t black SF-1746 1/8” 19t black SF-1747 1/8” 20t black SF-1748 1/8” 21t black

Soma Track LockringLockring for 1.29”x24tpi (left handed) threads•CrMo steel construction•

part# description SF-1750 track lockring, 1.29”x24tpi LH

SoulCraft Convert 1-Speed Conversion KitEverything needed to convert a geared bike into a single speed•Includes chainring, an HG freehub compatible single cog and custom •SoulCraft spacers (for a 2:1 ratio), Convert chain tensioner, chainring bolts, and KMC Z72 chain

part# BCD chainring cog SB-0070 5-bolt / 94mm 32t 16t SB-0071 4-bolt / 104mm 32t 16t SB-0072 5-bolt / 110mm 36t 18t

SoulCraft Cassette Cog Spacer KitAllows the use of a single cog on any 8-9 speed Shimano cassette body•Variety of 5 interchangeable machined aluminum spacers to •customize chainline

part# includes SB-0075 5 machined aluminum spacers

Spot Single Shot Cassette Spacer KitAllows the use of a single cog on any 8-9 speed Shimano cassette body•Variety of interchangeable aluminum spacers to customize chainline•

part# includes SG-5210 6 aluminum spacers

SoulCraft Convert 1-Speed Conversion Kit

SoulCraft Cassette Cog Spacer Kit

Soma Track Kog

Soma Track Lockring

Spot Single Shot Cassette Spacer Kit

386

COM

PO

NEN

TS

& PA

RTS

Bearings

Brakes

Cables & Casing


Chains & Guides

Chainrings & Guards


Derailleurs

Fasteners

Forks & Shocks

Grips & Tape


Headsets

Hubs

Pedals

Rims

Saddles

Seatposts

Shifters

Spokes

Stems

Tires

Tubes & Tube Care

Wheels

cassettes single speed & track

Suzue Stainless Steel Track CogPrecision machined high grade Japanese stainless steel•Mirror polish finish•Choose 3/32” or 1/8” widths•

part# size teeth color SZ-2114 1/8” 14t silver SZ-2115 1/8” 15t silver SZ-2116 1/8” 16t silver SZ-2117 1/8” 17t silver SZ-2118 1/8” 18t silver SZ-2119 1/8” 19t silver SZ-2134 3/32” 14t silver SZ-2135 3/32” 15t silver SZ-2136 3/32” 16t silver SZ-2137 3/32” 17t silver SZ-2138 3/32” 18t silver SZ-2139 3/32” 19t silver

Suzue Stainless Steel Track LockringPrecision machined high grade Japanese stainless steel•Features a lifted edge that can handle a 12 tooth cog•Mirror polish finish•1.29”x24tpi (left handed) threads•

part# description SZ-2150 track lockring, 1.29”x24tpi LH

Wheels Single Speed Conversion Kit

Aluminum spacers to convert a Shimano splined cassette hub •to a single speedAlso available with spacers and cog or with spacers, cog and •chain-sandwiching guide plates for added chain security

part# includes WZ-1951 (7) 4.5mm and (2) 1mm spacers: no cog WZ-1953 7 spacers and 16t x 3/32 cog WZ-1955 7 spacers and 16t x 3/32 cog and guide

Wheels Track LockringStainless steel replacement lockring for 1.29”x24tpi (left handed) threads•

part# description WZ-1900 stainless steel track lockring

Wheels 7sp Cassette/8sp Body SpacerAllows the use of a 7 speed Shimano cassette on an 8 or 9 speed •Shimano cassette body

part# spacing package WZ-1903 4.5mm 5/bag

Wheels Cassette/Bottom Bracket SpacerAlso for use as a threaded bottom-bracket cup spacer•

part# spacing package WZ-1910 1.0mm 10/bag WZ-1915 1.5mm 10/bag WZ-1920 2.0mm 10/bag WZ-1925 2.5mm each

WTB Single Duty CogForged steel one-speed cog for use with HG splined cassette hubs •and 1/8” chainsIntegrated shoulder/spacer for added strength against freehub splines•

part# size teeth color WT-4116 1/8” 16t silver WT-4117 1/8” 17t silver WT-4118 1/8” 18t silver WT-4120 1/8” 20t silver

Suzue Stainless Steel Track Cog

Suzue Stainless Steel Track Lockring

Wheels Track Lockring

WTB Single Duty Cog

Wheels 7sp Cassette/8sp Body Spacer

Wheels Cassette/Bottom Bracket Spacer

Wheels Single Speed Conversion Kit