Transcript
  • B&H METAL PROCESSING SECTOR

  • B&H

    Inve

    stm

    ent P

    roje

    cst

    2

    Cement plant UgljevikLocation UgljevikLocation description Industrial Zone Ugljevik. Favorable geographic position – nearby Majevica

    mountain. Location is based at the re cultivated space of 50 hectares.

    Company description Project of the Cement plant Ugljevik is based upon mineral resources and huge quantities of marine marl that follows coal digging in Ugljevik mine. Beside the marine marl that has an excellent chemical composition, another important factor is top quality limestone with more than 97% of calcium carbonate in its content. Ash that comes as a sub product of power plants also satisfies cement quality.

    Project description Building of new cement plan in Ugljevik area that would satisfy the newest international standards in order to launch a new production line.Revitalization of the factory.

    Estimated total investment cost 150 -200 million € for cement plant that would produce 600.000 tons per year.Type of financial investment • Full investment – direct investor (according to the law)

    • Other modalities from the foreign partner who already has a similar factory Type of other (technical) cooperation sought from foreign sources

    • Financial investment in to a new technology • Financial assistance for the local municipality project will depend on the municipality budget

  • B&H Investment Projecst

    3

    Construction of Insulation Sheep Wool Materials Factory LopareLocation LopareLocation description Industrial Zone Lopar Total area of Lopare municipality is 299.8 km².

    The closest airport is near Tuzla (but not passenger airport, only cargo).The closest railway stations are in Tuzla (25km) and Brčko (30km).

    Company description New company is planned to be opened at the mentioned municipality. Project description Construction of insulation sheep wool materials factory – since the whole area

    has enormous wool resources. Estimated total investment cost 900.000 €Type of financial investment • Auction - Primary means of funding through the actions whose value is going

    to be determined according to the amount of stakeType of other (technical) cooperation sought from foreign sources

    • Financial investment in to a new technology • Provision of new foreign markets

  • B&H

    Inve

    stm

    ent P

    roje

    cst

    4

    Revitalization of the Bolts factory Mrkonjić GradLocation Mrkonjić GradLocation description Mrkonjić Grad – Municipality located in the NE part of Bosnia and Herzegovina.

    Mrkonjić Grad is located 52 kilometres from the administrative centre - the city of Banja Luka. It is located at the crossroads of important roads: -exit to the highway Belgrade-Zagreb to the North -exit to the Split harbour to the South Closest airports are in Banja Luka (64 km), Sarajevo (187 km) and Zagreb (225 km).

    Company description Bolts Factory Mrkonjić Grad has been founded in 1949. and used to employ around 600 employees. In a period from 1992 to 1995 factory has been ruined a lot and the production has been reduced. Main activity is bolts production.Due to those circumstances factory faced a lot of problems and in 2007 bankruptcy proceedings has been started and lasted up to 18.08.2010. when the whole procedure was successfully finished. Production of bolts reached 7,000 tons annually.

    Project description Revitalization and expansion of the existing capacities since infrastructure and business facilities as well as qualified labour force are already provided.Launch of a new production.

    Estimated total investment cost no dataType of financial investment • Privatization

    • Joint VentureForeign partner would provide a financial resources and a local partner would provide necessary documentation and licences required.

    Type of other (technical) cooperation sought from foreign sources

    • Financial investment in to a new technology and production capacities modernization• Provision of new markets

  • B&H Investment Projecst

    5

    Metalno dd Zenica- Reconstruction of the work shop for production of steel structureLocation Zenica Location description Existing work shop in the area owned by the company Metalno dd Zenica,

    Sarajevska 364, Zenica, Bosnia and HerzegovinaProject status Modernisation of the work shop for production of steel structureProject description Reconstruction of the existing work shop, installation of the new cranes,

    change of the roof and facade, etc.Estimated total investment cost 750.000,00 KM

  • B&H

    Inve

    stm

    ent P

    roje

    cst

    6

    FAMOS Koran - PaleLocation Pale – Istočno SarajevoLocation description Pale is touristic and university center of Republika Srpska. Pale is 16km far from

    Sarajevo -capital of B&H and 17 km far from Jahorina (Olympic mountain).26 km far from Sarajevo airport and 20 from Sarajevo Railway station.

    Company description The factory was founded in 1952. It belongs to the metal light industry com-plex, engine industry, works for unknown buyer and on the principle of servic-es. The basic activity is an industrial remount of Diesel-engines ,transmissions and aggregates from trucks, busses, ships and others, as well as a production of parts of engines and transmissions, from own program or to orders.The “Koran” factory Pale does business today as a successful firm, with a pat-tern of good organized and efficient work. The quality control is being carried out in the modern equipped laboratories. The factory is through its capacities, personnel and modern management completely ready to respond to all market requirements.

    Project description Brown field investmentRevitalization and expansion of the existing capacities.Infrastructure and business facilities as well as qualified labour force are already provided.

    Estimated total investment cost From 500.000 until 500.000,000 €Type of financial investment • Full investment – direct investor (according to the law)

    • Public Private Partnership• Concessions

    Type of other (technical) cooperation sought from foreign sources

    • Financial investment in to a new technology and production capacities mod-ernization• Provision of new foreign markets

  • B&H Investment Projecst

    7

    Fabrika AD Alumina – Kneževo- Purchase of the equipment with digital control center for cutting aluminium and PVC profiles and equipment for alubond facadeLocation KneževoLocation description Industrial ZONE Kneževo – Rajka Dukića b

    Company is located at the city centre, in side of the industrial zone, nearby the regional road PU 413 Karanovac – Kneževo – Turbe enabling easy access to the markets. It lies about 40 kilometers (25 mi) south-east of Banja Luka.

    Company description Alumina a.d. Knezevo engages in the processing of aluminum semi-products, the production and erection of aluminum semi-products, and the production of construction steel profiles and installations. The company was founded in 1977 and is based in Knezevo, Bosnia-Herzegovina.

    Project description Modernization and expansion of the existing capacities and starting a new production line. Procurement of the digital equipment would provide technical and technological company progress.

    Estimated total investment cost 350.000,00 €Type of financial investment • Full investment

    • Direct investor (according to the law) • Public Private PartnershipLocal authorities are fully ready to assist all the investors in obtaining permits necessary to start with the investment and to offer subventions for new employees.

    Type of other (technical) cooperation sought from foreign sources

    • Financial investment in to a new technology and production capacities modernization• Provision of new foreign markets

  • B&H

    Inve

    stm

    ent P

    roje

    cst

    8

    Metalka a.d. Chain and Fitting Construction Factory Prnjavor (in bankruptcy)Location PrnjavorLocation description Vida Nježića Street - Prnjavor

    Prnjavor municipality is located at the NW part of Bosnia and Herzegovina. Regional road Banja Luka – Prnjavor – Derventa (M-16) Regional road Čelinac – Prnjavor – Srbac (P-474) Favourable geographic position.

    Company description Metalka a.d. Prnjavor used to manufacture goods from metal. Company pro-duces fasteners, screws and wide range of chains. Bankruptcy process succes-sively finalized and the company is ready for a new buyer.

    Project description It is important to sell all the property of the factory in order to start a new pro-duction – by the fourth auction in Banja Luka area on 07. November 2011.

    Estimated total investment cost Fixed assets value (a+b) is 1. 072 560,00 € (35% of the total value and it cannot be sold under that price at the fourth auction)

    Type of financial investment • Full investment – direct investor (according to the law) since it is in bankruptcy• Trustee sells its property in actual and legal state in which that property was at the moment of sail and transfer to the buyer all scope of rights which the debtor possessed at the moment of sail.

    Type of other (technical) cooperation sought from foreign sources

    • All expenses about purchase contract, real estate taxes and other taxes needs to be paid by the buyer.• After the purchase price has been paid all buyers obligations towards seller are finalized.

  • B&H Investment Projecst

    9

    MTK Metalotehna - Kneževo - Supply and installation of plants for producing matrix forgingsLocation KneževoLocation description Industrial ZONE Kneževo – Rajka Dukića bb

    Company is located at the city centre, in side of the industrial zone, nearby the regional road PU 413 Karanovac – Kneževo – Turbe enabling easy access to the markets. It lies about 40 kilometers (25 mi) south-east of Banja Luka.

    Company description “Metalotehna” exists for 28 years already. MTK “Metalotehna” Kneževo is producing parts for railways (wagons and locomotives). Procurement and installation of the facilities for steel capacities production with 200 tons a year would satisfy needs of railways of all former Yugoslav republics as well as needs of European Union.Production of railway equipment is carried out by our own certified technology, and documentation and quality control is adjusted according to the latest UIC norms, norms of the European Institute for Railway Erri, as well as internal standards, state, and railroad customers of our products.

    Project description Revitalization and expansion of the existing capacitiesEstimated total investment cost 255.000,00 €Type of financial investment • Full investment

    • Direct investor (according to the law) • Public Private PartnershipLocal authorities are fully ready to assist all the investors in obtaining permits necessary to start with the investment and to offer subventions for new employees.

    Type of other (technical) cooperation sought from foreign sources

    • Financial investment in to a new technology and production capacities modernization• Provision of new foreign markets

  • B&H

    Inve

    stm

    ent P

    roje

    cst

    10

    Production of automotive parts, agriculture machinery and equipment for forestry Kostajnica

    Location KostajnicaLocation description Business zone “UNA” – area of 14, 7 hectares. Zone is located at Blok III at the

    entrance of Kostajnica Municipality near by the regional road M14 Novi Grad – Kostajnica. Favourable geographic positions, border crossing line, two airports nearby (90km) provide a huge consumer market.

    Company description Business zone UNAProject description Greenfield investment.

    Project prescribes construction of the production of new buildings for automo-tive industry, agriculture machinery and equipment for forestry.

    Estimated total investment cost No dataType of financial investment • Full investment – direct investor (according to the law)

    • Owner of the similar production companies if possibleLocal partners are going to provide necessary technical documentation

    Type of other (technical) cooperation sought from foreign sources

    • Financial investment in to a construction of new buildings• Provision of new foreign markets

  • B&H Investment Projecst

    11

    AD Fast Fabrika Specijalnih Transmisija Istočno Sarajevo – AD Fast Special Purpose Mechanical Power Transmitter Production FactoryLocation Istočna Ilidža – Istočno SarajevoLocation description Object location is near by the main road Sarajevo – Trnovo that fully provides

    main conditions for one production facility. Istočna Ilidža is 3km far from Sarajevo airport, 12 km far from the main railway station in Sarajevo and is surrounded by Olympic mountains Bjelašnica, Jahorina and Igman.

    Company description Before 1992. Same fabric existed at the mentioned location and nowadays needs entire reparation.Estimated current capital value of AD FAST is 1,864 300,00 Euro

    Project description Revitalization and expansion of the existing capacitiesEstimated total investment cost 255.000,000 €Type of financial investment Full investment-Joint Venture, Production capacities modernization, Employ-

    ment increase, Export increase, Providing domestic market with the specific metal products

    Type of other (technical) cooperation sought from foreign sources

    Main reason is to motivate foreign investors to come and invest in to Istocna Ilidza Municipality since the procedures and process for obtaining all the neces-sary documents and licences are very effective and prompt. Also, municipality authorities are fully ready to assist all the investors in obtain-ing permit necessary to start with the investment.

  • B&H

    Inve

    stm

    ent P

    roje

    cst

    12

    E - Metal Šamac Enamelling LineLocation ŠamacLocation description Planned project space is located in the middle of Industrial zone Šamac. It is

    100 m far from the regional road Šamac – Bijeljina, 1km far from border line with Croatia, 10 km far from highway Beograd – Zagreb, nearby railway station Šamac and 800 m far from Šamac port.

    Company description E-Metal company was founded 1986 as small workshop. From 2005 it started with a production of hot galvanized hydrator volume from 90 to 280 litters.Šamac municipality was famous thanks to boiler production “Meboš. After this factory was closed one part of experts that worked in “Meboš” opened a new factory in 2007 that is trying to reach former capacities and services. Beside mentioned E-Metal is still engaged in production of bottles for compressors up to 30 litters and producing carriers for air conditioners.

    Project description Revitalization of the company and increase of the existing production as well as launch of a new production. Modernization of the production for the company in order to become competitive at the domestic and foreign market.

    Estimated total investment cost 155.000 €Type of financial investment • Full investment – direct investor (according to the law)

    Foreign partner would provide a financial resources and a local partner will provide an existing manufacturing facility and technical documentation as well as subventions for new employees.

    Type of other (technical) cooperation sought from foreign sources

    • Financial assistance for the local municipality project will depend on munici-pality budget

  • B&H Investment Projecst

    13

    Kosmos Banja Luka – Equipping for Manufacturing of Mechanical Components and StructuresSector Military IndustryLocation Banja Luka Location description Land covers 78,681 m²

    Facilities cover 22,790 m²Project status • State owned capital is 85% or 33,333.899 KM (17 million Euro)

    • Equity of the company is 39,216.352 KM (20 million Euro)Project description Manufacturing of: airport and airplane equipment, antennas, metal structures;

    overhaul: radars and radar computer systems, missile systems, automation systems, combat and non-combat vehicles and arms, electric machines and automation elements Production possibilities:Overhaul 154,000 QH/year Manufacturing 118,000 QH/year Services 60,000 QH/year At the moment 268 workers employedMain goal is to increase the capacity use, productivity and competitiveness at the foreign marketExpected annual revenue is 2,800.000 KM (1,43 million Euro)

    Estimated total investment cost Total value is 2.16 million KM (1,1 million Euro)

  • B&H

    Inve

    stm

    ent P

    roje

    cst

    14

    Production of Corrugated Flexible Hoses by Mechanical Forming BijeljinaSector Metal Processing and Automotive IndustryLocation Bijeljina Location description Land covers 27,800m²

    Facilities 4,358m²Project status Investment rationale: - sales increase by 400.000 KM for the first year, addition-

    ally by 5-10% every following year. Project description Manufacturing of flexible metal, tubes, flexible shaft

    Production possibilities: Flexible corrugated hoses 48000 m Flexible strip-wound tubes 100000 m Flexible shafts 220000 m At the moment, 58 employees are working there.Main goal of the existing project is expansion of the product range and job creation

    Estimated total investment cost 490,000 КМ (250,533 Euro)Financing: 50% participation of the company (production capacity, provision of processed goods, participation in procurement of equipment, certificates, market research, expert staff and labor).

  • B&H Investment Projecst

    15

    Orao a.d. Production and Overhaul BijeljinaSector Military IndustryLocation Bijeljina Location description Land covers 99,000 m²

    Facilities cover 4,000 m²Project status • State owned capital is 69,3% or 20,776,380 KM ( 10,6 million Euro)

    • Equity of the company is 29,993,531 KM (15,3 million Euro)Project description Overhaul and manufacturing of parts for turbojet engines, special tools and

    equipment, calibration of measuring equipment Production possibilities: Overhaul 186,425 QH/year Manufacturing 142,364 QH/year At the moment 425 workers employed Main goal is capacity modernization

    Estimated total investment cost No data

  • B&H

    Inve

    stm

    ent P

    roje

    cst

    16

    Tehnički remont a.d. BratunacSector Military IndustryLocation Bratunac Location description Land covers 69,667 m²

    Facilities cover 27,005 m²Project status • State owned capital is 85% or 18,818,422 KM (9,6 million Euro)

    • Equity of the company is 22,139.322 KM (11,3 million Euro)Project description General overhaul: arms, caterpillar vehicles, towed vehicles, optical instru-

    ments, quartermaster equipment and machinery, automobiles, construction and mining machinery, engines and generators and braking systems Production possibilities arms plant 56,784 QH/year engine building plant 69,888 QH/year new creation and regeneration plant 72,072 QH/year At the moment 165 workers employed Main goal is capacity modernization

    Estimated total investment cost No data

  • B&H Investment Projecst

    17

    Manufacturing of New Types of Steering Mechanisms under Rack and Pinion SystemLocation Nevesinje Location description Land area covers 21,190 m2

    Facilities 5,743 m2 Project status At the moment compnay supply FAS with steering mechanisms for initial

    installation. Main goal of the mentioned investment is increase of employment of 200 workers (69 employed at the moment) and to strat the production of steering mechanisms for FIAT Serbia.Total revenue is EUR 10 mil.

    Project description Manufacturing of steering mechanisms for passenger cars and other parts in the field of automotive industry. Production possibilities - steering mechanisms 250,000 pcs/yearMain goal is manufacturing of steering mechanisms for FIAT Serbia Equity BAM 3,891,969 KM

    Estimated total investment cost Total value is 4.89 million KM

  • B&H

    Inve

    stm

    ent P

    roje

    cst

    18

    FAMOS – Manufacturing of Steering Unit Components for Commercial VehiclesLocation Istočno SarajevoLocation description Land covers 62.870 m²

    Buildings cover 20.351 m²Project status State owned capital is 65% or 19.467.403 KM (10 million Euro)

    Equity is 29.949.919 KM (15 million Euro)Project description At the moment manufacturing and overhaul of engines and transmissions is

    madeProduction possibilities:- engines 1500 pcs/year - transmissions 1500 pcs/year- crankshafts 10000 pcs/year - housings 5000 pcs/year - cylinder heads 30000 pcs/year - gears 30000 pcs/year Additional investment in production equipment and tools, and investment in working capital is required by foreign investor in order to increase production, sales, export and number of employees (285 AT THE MOMENT).

    Estimated total investment cost 5,5 million KM (2,81 million Euro)Financing:Company - 1,5 million KM (0,77 million Euro)Partner - 4 million KM ( 2,05 million Euro)

  • B&H Investment Projecst

    19

    New purifiers factory a.d. RogaticaLocation Rogatica Location description Production hall covers 2976.50 m2

    Administrative section covers 382.40 m2 Available capacity: Land covers 37,387 m2, Facilities 8,294 m2

    Project status Existing infrastructure: electricity, water, drains, heating, gas installations, in-stallations for compressed airFire alert system is also availableCompany is 100% state-owned capital and its equity is 7,994,975 million KM (4,1million Euro).

    Project description At the moment manufacturing of purifiers and filters for air, fuel and oil, oil separators is made within the factory.Production possibilities: - air purifiers 30000 pcs/year - air filters 150000 pcs/year - fuel purifiers 5000 pcs/year - fuel filters 200,000 pcs/year - oil purifiers 5,000 pcs/year - oil filters 150,000 pcs/year Number of workers is 27

    Estimated total investment cost No data

  • B&H

    Inve

    stm

    ent P

    roje

    cst

    20

    Novi Autodijelovi a.d. Rudo (New Automotive Parts)Location RudoLocation description Land covers 23,858 m²

    Facilities 5,743 m²Available capacity: Production hall 594 m2 For galvanization 162 m2

    Project status Company is 100% ownership of the Government of the Republic of SrpskaProject description Manufacturing of parts and accessories for motor vehicles (mufflers, tanks)

    Production possibilities: fuel tanks 4500 pcs/year air tanks 5000 pcs/year oil tanks 1500 pcs/year mufflers 3500 pcs/year containers 500 pcs/year At the moment, 21 employees are working there.

    Estimated total investment cost 2.839.479 КМ (1,45 €)

  • B&H Investment Projecst

    21

    SOKO FTS and SOKO Guma - Ljubinje Revitalization of industrial plant for manufacture of the metal products and technical rubber productsLocation LjubinjeLocation description Offered location is settled in the area of former industrial zone SOKO, near by

    the regional road M-6 that connects Ljubinje with Trebinje and Dubrovnik in Croatia and Nikšić in Monterenegro from one side and from another side with Stolac, Mostar, Čapljina, Metković and Ploče (Croatia).Favourable geostrategic position, closest airport in Mostar is 50km far from the municipality, 60km far from Dubrovnik and 80km from Herceg Novi.Closest see exit is Slano (40km), port Ploče in Croatia (75km) and the closes railway is in Čapljina 40km far away.

    Company description Soko FTS a.d. Ljubinje manufactures markets fabricated metal products. The company was incorporated in 2001 and is based in Ljubinje, Bosnia-Herzegovina. Soko guma a.d. Ljubinje manufactures and markets rubber products. The company was incorporated in 2001 and is based in Ljubinje, Bosnia-Herzegovina.

    Project description Revitalization of the metal processing sector within the area.There are two factories within this company one called SOKO FTS (available capacities for metal processing production) and the other called SOKO GUMA (available capacities for production of technical rubber products)Privatization of the existing capacities is obliged as well as investments into new reproductive capacities.

    Estimated total investment cost 260.000 €Type of financial investment • Full investment – direct investors (according to the law)

    • PrivatizationFinalization of the privatization process of the state capital in SOKO FTS and SOKO GUMA and creation of positive conditions for production reconstruction in metal processing and production of rubber products, in order to employ 100 workers up to 2013.

    Type of other (technical) cooperation sought from foreign sources

    • Financial investment in to a new technology and production capacities modernization• Provision of new foreign markets and export increase

  • B&H

    Inve

    stm

    ent P

    roje

    cst

    22

    Tool Factory UgljevikLocation UgljevikLocation description Industrial Zone Ugljevik

    Favorable geographic position – nearby Majevica mountain.Locating is based at the re cultivated space of 50 hectares.

    Company description RITE Ugljevik (Coal mine and power plant) uses a great number of tools for the production what brings us to the conclusion that there is a need for a factory that could meet that production program.During previous years adequate labour force was educated in order to meet required production standards.

    Project description New production capacities of metal industry related to RITE (Coal mine and power plant ) UgljevikRevitalization of the company and increase of the existing production as well as launch of a new production.

    Estimated total investment cost No dataType of financial investment • Full investment – direct investor (according to the law)

    • Other modalities from the foreign partner who already possess a similar factory

    Type of other (technical) cooperation sought from foreign sources

    • Financial investment in to a new technology • Financial assistance for the local municipality project will depend on the municipality budget

  • B&H Investment Projecst

    23

    Industrial zone Poljavnice – Metal processing complex – Unametal Novi GradLocation Novi GradLocation description Business zone is located in side of the settlement Poljavnice, 3km far from the

    city centre. Business zone is consisted of three parts: First part of the industrial zone where some of the companies are already based – Nova Form, HS – Invest, Prijedorputevi, Kozaraprevoz, Unametal, RK Neimar... This part of the zone covers 184.869 m². Second part of the zone covers 56 437 m² where more factories have been located and started a successful production such as Enernovi, Simpromax, Izolater, Iskra, etc... The third part of the zone is actually land owned by municipality Novi Grad mostly.

    Company description Unametal a.d. Novi Grad manufactures metal structures and parts of structures. The company was incorporated in 2001 and is based in Poljavnice zone in Novi Grad municipality. Area covers 40.000 m² and it’s located near by the river Una with asphalt road available. Huge hall constructed 1985 covers 4000m² and 12m height. Other facilities available. Establishing process of industrial zone Poljavnice started from 2004 since the Act on allowing sales of unused municipal land to entrepreneurs who want to start production companies and create more jobs, has been adopted.

    Project description Revitalization of the company and increase of the existing production as well as launch of a new production.

    Estimated total investment cost No dataType of financial investment • Direct land sail

    • Seeking of strategic partner for investment• It’s been planned that the government of Republika Srpska participates at the project co-financing through the business zones financing program in order to reduce investor’s expenses for additional utilities required within the zone.

    Type of other (technical) cooperation sought from foreign sources

    • Production capacity revitalization and modernization of the existing capacities.

  • B&H

    Inve

    stm

    ent P

    roje

    cst

    24

    “Municipality of Ljubinje”Location Municipality of Ljubinje - Former industrial zone SоkоLocation description Good geographic position, good transport conections, soon will pass through

    the Corridor Vc and the Adriatic – Ionian Motorway at 20-30 km from Ljubinje, complete utility infrastructure , proximity of borders of Croatia and Montene-gro.

    Company description Local authority Project description Investment in the existing companies Sоkо -FТS and Sоkо-Gumа.

    Qualified labor, present tradition (production of spare parts for the factory Zаstаvа Krаguјеvac)

    Estimated total investment cost 500,000 BAMType of financial investment N/AType of other (technical) cooperation sought from foreign sources

    Brownfield


Recommended