Curriculum Vitae of Prof. Vijay Kumar Gupta
1. Name in Full VIJAY KUMAR GUPTA
2. Designation Professor
3. Date of Birth 20-12-1968
4. Current Address PDPM-IIITDM Jabalpur,
Dumna Airport Road,
Jabalpur (MP) India
482005
5. Email [email protected]
6. Phone (0761)2632696
7. Education Qualification
Ph.D. (Mechanical Engineering), Indian Institute of Technology Bombay, 2003
(Studies on Piezoelectric Actuated Shell with Application to Optimal Steering of
Antenna)
MBA, IGNOU, 2001
M.Tech. (Relaibility Engineering), Indian Institute of Technology Bombay,
1994
B.E. (Mechanical Engineering), Engineering College Kota, University of
Rajasthan Jaipur, 1990
8. Experience
Lecturer, Sr. Lecturer and Associate Professor, Mechanical Engineering,
Rajasthan Technical University Kota (03-12-1994 to 26-10-2004)
Associate Professor, Mechanical Engineering, Rajasthan Technical University
Kota (27-10-2004 to 04-07-2007)
Associate Professor, PDPM IIITDM Jabalpur (05-07-2007 to 2012)
Professor, PDPM IIITDM Jabalpur (05-07-2012 to continue)
9. Administrative Responsibilities:
a. Institutional Level
i. Member, BoG (January 2015 to continue)
ii. Dean Academic (July 2012 to continue)
iii. Member Senate (2010 to continue)
iv. Head, Counseling Services (2010)
v. Convener UGCS (2008-09 and 2011to 2013)
vi. Convener PGCS (2011 to 13)
vii. Coordinator Academic Affair (2011)
viii. Member IAG-GA (28-08-2008 to continue)
ix. Incharge Central Facilities (2010 to continue)
b. Other than Institutional Level
i. Dy. Center Incharge CCB - 2009
ii. Center Incharge CCB/CSAB - 2012, 2013, 2014
iii. Center Incharge CCMT – 2013, 2014
iv. Center Incharge AIEEE-2013
v. Member, First court, Dr. Harisingh Gour Vishwavidyalaya Sagar (from
17/02/2014 onwards)
vi. Member, BoS, Nanotechnology, Rajasthan technical University Kota in
2010
vii. Member, BoS, Mechanical Engineering, Rajasthan technical University
Kota, 2013 and 2014
viii. Member, BoS, Mechanical Engineering, Maharana Pratap University for
Agriculture and Technology Udaipur, 2005 to 2007
10. Publications
A. Papers in Referred Journals
1. Gupta V.K., Seshu P., K.K.Issac, Oct., 2004, “Finite Element and
Experimental Investigation of Piezoelectric Actuated Smart Shells”, AIAA
Journal, Vol 42, No. 10, Page 2112-2123
2. Gupta V.K., Seshu P., K.K.Issac, Shevgaonkar R.K., Jan., 2005, “Beam
Steering and Shaping of Smart Cylindrical Antenna”, AIAA Journal, Vol 43,
No. 1, Page 165-173
3. Shivdas Dhage, Vijay Kumar Gupta, P. Seshu, P. M. Mujumdar, B. Seth,
Sept., 2006, “Characterization of the Role of Adhesive Bonding on
Piezoelectric Actuation of Beams”, Journal of the Aerospace Sciences and
Technology, India, v58 n3, 225-233
4. Gupta V.K., Seshu P., K.K.Issac, Shevgaonkar R.K., Jan’ 07, “Optimal
Steering of Paraboloid Antenna using Piezoelectric Actuators”, Smart
Material and Structures, Vol 16, page 67-75.
5. Gupta V.K., 2011, “Modified approach for optimum position and sizing of
piezoelectric actuator for steering of parabolic antenna”, Structural
Longevity, Vol 6(2), page 65-75
6. Abhay M Khalatkar, V.K. Gupta, Rakesh Kumar Haldkar, 2012, “Finite
Element Analysis of Cantilever Beam for Optimal Placement of
Piezoelectric Actuator”, Applied Mechanics and Materials, Volume 110,
4212-4219
7. Abhay M Khalatkar, V.K. Gupta, Rakesh Kumar Haldkar, 2012, “Study of
Effect of Geometry Parameters on Piezoelectric Cantilever by Modal and
Harmonic Analysis”, Advanced Materials Research, Volume: 383, 6689-
6694.
8. Rohit Tiwari, Vijay K Gupta, P.K. Kankar, 2013, “Bearing Fault Diagnosis
based on Multi-scale Permutation Entropy and Adaptive Neuro Fuzzy
Classifier”, Journal of vibration and Control, 2013, DOI:
10.1177/1077546313490778
9. R Upadhyay, P.K. Kankar, P.K. Padhy, VK Gupta, 2013, “Feature
extraction and classification of imagined motor movement
electroencephalogram signals”, International Journal of Biomedical
Engineering and Technology 13 (2), 133-146
10. V Vakharia, VK Gupta, PK Kankar, 2014, “A multi-scale permutation
entropy based approach to select wavelet for fault diagnosis of ball
bearings”, Journal of Vibration and Control, DOI: 1077546314520830
B. Papers published in Conference Proceedings
1. Gupta V.K., Seshu P., K.K.Issac, April 22-25, 2002, Finite Element and
Experiment Studies on Piezoelectric Actuated Curved Beams, 43rd
AIAA/ASME/ASCE/ AHS/ASC, Structures, Structural Dynamics, and
Materials Conference, Denver, USA
2. Gupta V.K., Seshu P., K.K.Issac, December 12-14, 2002, Degenerated shell
finite element for smart structures, ISSS-SPIE conference 2002, IISc
Bangalore
3. Gupta V.K., Seshu P., K.K.Issac, Shevgaonkar R.K, August 18-21,2003,
Piezoelectric Actuated Antenna Shells, 11th World Congress in Mechanism
and Machine Science, Tianjin, China
4. Gupta V.K., Seshu P., and K.K.Issac, Dec. 1-6, 2005, A Comparison of
Finite Element and Experimental Investigations on Piezoelectric Actuated
Plates, International Conference on Computational & Experimental
Engineering and Sciences – 2005, IIT Madras
5. Natraj J., G.V. Subbarao, M. Ravibabu and Gupta V.K, 2009, “Advances
in Frequency Modulated Thermal Wave Imaging for Non-contact
Subsurface Sensing”, Proceedings of IPRoMM 2009, 10-11 July 2009,
Chennai, India, pp 67-73
6. Khalatkar Abhay M, Gupta V K and Haldkar Rakesh, 2010, "Study of
FEA Analysis of Piezoelectric Cantilever Beam for Optimal Placement"
volume 2, page 86-90, IEEE Sponsored, MIMT 2010, Singapore
7. Gupta Vijay Kumar, 2011, “Modified approach for optimum position and
sizing of piezoelectric actuator for steering of parabolic antenna”, ICCES:
International Conference on Computational & Experimental Engineering
and Sciences, Vol. 20, No. 2, pp. 55-56, Nanjing, China
8. Tripathi Suteerth, Choubisa Devesh, gupta vijay Kumar, 2011, “Design
and fabrication of a simple 5-dof walking machine”, Indo-Russian
Seminar on “Computational Intelligence and Modern Heuristics in
Automation and Robotics” at State Technical University Novosibirsk,
Russia during September 10-12, 2011
9. Tanuja Sheorey and Vijay Kumar Gupta, “Effective Virtual Laboratory
Content Generation and Accessibility for Enhanced Skill Development
through ICT”, 5th
International Conference on Distance Learning and
Education (ICDLE 2011), held on September 16-18, 2011, in Singapore.
10. Khalatkar Abhay M, Gupta V K, 2011, "Study Of Effect Of Actuator
Position On Piezoelectric Cantilever by Modal And Harmonic Analysis",
Volume 1, ICMST2011, SINGAPORE
11. Khalatkar Abhay M, Gupta V K and Haldkar Rakesh, 2011, "Modeling
and Simulation of Cantilever Beam for optimal placement of
Piezoelectric Actuators for Maximum Energy Harvesting, SPIE Smart
Nano-Micro Materials and Devices, December 4-7, 2011, Swinburn
University Melbourne, AUSTRALIA.
12. Khalatkar Abhay M, Gupta V K, 2012, "Study of Effect of Actuator
Position on Piezoelectric Cantilever by Modal & Harmonic Analysis,
ICSSD2012, organised by Texas A&M University, USA. and MNIT,
Jaipur, January 04-06, 2012
13. Warisawa Shin’ichi, Tsuchiya Kazuyoshi, Gupta Vijay Kumar, Sheorey
Tanuja, Tandon Puneet, 2012, “Design and analysis of a micro pump for
wearable blood sampling system”, 2012 ASME-ISPS /JSME-IIP Joint
International Conference on Micromechatronics for Information and
Precision Equipment, MIPE2012, June 18-20, 2012, Santa Clara,
California, USA.
14. Rahul Upadhyay, P.K.Kankar, Prabin K. Padhy and V.K.Gupta,
“Classification of drowsy and controlled EEG signals”, Proceeding on
NUiCONE-2012, Ahmedabad, India, Dec 2012.
15. Khalatkar Abhay M, Agrawal Ankit, Gupta VK, “Analytical, FEA and
Experimental Comparisons of Piezoelectric Energy Harvesting Using
Engine Vibrations ” International Conference on Innovation in Design and
Manufacturing (InnDeM2012) held at PDPM IIITDM Jabalpur from
December 05-07, 2012 (Paper No, InnDem-4004)
16. V. Vakharia, V.K. Gupta, P.K. Kankar, “Nonlinear dynamic analysis of
balanced and unbalanced rotor supported by ball bearings”, International
Conference on Innovation in Design and Manufacturing (InnDeM2012) held
at PDPM IIITDM Jabalpur from December 05-07, 2012 (Paper No,
InnDeM-4005)
17. R. Upadhyay, P.K. Kankar, P.K. Padhy, V.K. Gupta, “Extraction and
classification of Electroencephalogram signals”, 2012 IEEE International
Conference on Computational Intelligence and Computing Research (IEEE
ICCIC-2012) held at Coimbatore, India, December 18-20, 2012.
18. Gupta A.K. and Gupta V.K., “Design and development of six-wheeled
Multi-Terrain Robot”, 2013 IEEE International Conference on Control,
Automation, Robotics and Embedded System (CARE-2013) held at
Jabalpur, India, December 16-18, 2013
19. Upadhyay, R., Kankar, P.K., Padhy, P.K., Gupta, V.K., “Robot motion
control using Brain Computer Interface”, 2013 IEEE International
Conference on Control, Automation, Robotics and Embedded System
(CARE-2013) held at Jabalpur, India, December 16-18, 2013
20. Tiwari, R., Kankar, P.K., Gupta, V.K. “Bearing fault diagnosis using Radial
Basis Function network and adaptive neuro fuzzy classifier” 2013 IEEE
International Conference on Control, Automation, Robotics and Embedded
System (CARE-2013) held at Jabalpur, India, December 16-18, 2013
11. Awards and Recognitions
Awarded “ISAMPE K.Suryanarayan Rao Memorial Senior student award for R & D
in smart technology for Year 2003”.
12. Important Conferences / Workshops Organized (in last five years):
Convener International Workshop DeW 2012 on “Y Design in Engineering”
held at PDPM IIITDM Jabalpur during December 05-07, 2012
Co-convener International Conference on Innovations in Design and
Manufacturing (InnDeM 2012) held at PDPM IIITDM Jabalpur during
December 05-07, 2012
Organized three day workshop on AVR Microcontroller on April 01-03, 2011
13. Details of Research Projects being implemented/ completed:
1. Investigator(s) : Vijay Kumar Gupta, Dr. Tanuja Sheorey, Prof. Puneet Tandon
Project Title : Vlab on Manufacturing Processes
Project Status : Ongoing
Duration : 3 years (extended to further 2 years)
Date of Start : April, 2010
Funding Agency: Ministry of Human Resource Development
Total Cost : Rs. 40 Lacs
2. Investigator(s) : Dr. Tanuja Sheorey, Vijay Kumar Gupta, Prof. Puneet Tandon
Project Title : Vlab on Mechatronics
Project Status : Ongoing
Duration : 3 years (extended to further 2 years)
Date of Start : April, 2010
Funding Agency: Ministry of Human Resource Development
Total Cost : Rs. 40 Lacs
3. Investigator(s) : Prof. Puneet Tandon, Vijay Kumar Gupta, Dr. Tanuja Sheorey
Project Title : Development of a micro pump with NEMS sensing function for
an automatic blood collecting and measurement system
Project Status : Completed
Duration : 2 years
Date of Start : April, 2010
Funding Agency: Department of Science and Technology
Total Cost : Rs. 4 Lacs
4. Investigator(s) : Dr. Prabin Kumar Padhy and Vijay Kumar Gupta
Project Title : Brain Control Mobile Robot
Project Status : completed
Duration : 2 years
Date of Start : April, 2012
Funding Agency: Department of Science and Technology
Total Cost : Rs. 18.5 Lacs
14. Membership of Professional Bodies: IEEE, SPIE, ASME, AMM, ISTE, IE(India)
Recommended
