Download xls - Dimensionen Flansche u.Fittinge.xls

PIPE DIMENSIONS CS & SS

Dimensions acc. ANSI Nominal Pipe Size:

do Pipe ø outside 273.05 mm

di Pipe ø inside 242.93 mm

s Pipe wallthkn. 15.06 mm Pipe schedule: 80

A Pipe section 122.06 cm² Capacity v = (m/s)

O Circumference 857.81 mm C1 0.50 83.43

S Surface 0.8578 m²/m¹ C2 1.00 166.86

W1 Weight 95.8181 kg/m¹ C3 1.50 250.29

W2 Weight full of water 142.1683 kg/m¹ C4 Choose 1.50 250.29

Dim. acc. DIN 2448 (seaml.) Diameter Nominal:



s Pipe wallthkn. 4.00 mm Wallthickness (mm) 4



S Surface 0.1894 m²/m¹ C2 1.00 6.19

W1 Weight 5.5538 kg/m¹ C3 1.50 7.73


Dim. acc. DIN 2458 (welded) Diameter Nominal:



s Pipe wallthkn. 3.60 mm Wallthickness (mm) 3.6



S Surface 0.1894 m²/m¹ C2 1.00 6.38

W1 Weight 5.0339 kg/m¹ C3 1.50 7.97


Dim. Stainless steel pipes Pipe dimensions (mm)

do Pipe ø outside 4,00 mm

di Pipe ø inside #VALUE! mm

s Pipe wallthkn. #VALUE! mm

A Pipe section #VALUE! cm² Capacity v = (m/s)

O Circumference #VALUE! mm C1 0.50 #VALUE!

S Surface #VALUE! m²/m¹ C2 1.00 #VALUE!

W1 Weight #VALUE! kg/m¹ C3 1.50 #VALUE!

W2 Weight full of water #VALUE! kg/m¹ C4 Choose 1.50 #VALUE!1

Dim. Cast iron pipes Nominal Pipe Size:



s Pipe wallthkn. 9.91 mm



S Surface 0.3032 m²/m¹ C2 1.00 #VALUE!

W1 Weight 21.1595 kg/m¹ C3 1.50 #VALUE!

W2 Weight full of water 25.7809 kg/m¹ C4 Choose 2.00 #VALUE!

PIPE DIMENSIONS CS & SS

m³/h

m³/h

m³/h

m³/h

m³/h

m³/h

m³/h

m³/h

m³/h

m³/h

m³/h

m³/h

m³/h

m³/h

m³/h

m³/h

m³/h

m³/h

m³/h

m³/h

document.xls Tabblad]04/13/2023

PIPE DATA acc ANSI B 16.5

NPS DN OD 5S 5 10S 10 20 30 40S Std. 40 60 80S XS 80 100 120 140 160 XXS

1/8" 6 10.29 - - - - - - 1.73 1.73 1.73 - 2.41 2.41 2.41 - - - - -1/4" 10 13.72 - - - - - - 2.24 2.24 2.24 - 3.02 3.02 3.02 - - - - -3/8" - 17.15 - - - - - - 2.31 2.31 2.31 - 3.20 3.20 3.20 - - - - -1/2" 15 21.34 1.65 1.65 2.11 2.11 - - 2.77 2.77 2.77 - 3.73 3.73 3.73 - - - 4.75 7.473/4" 20 26.67 1.65 1.65 2.11 2.11 - - 2.87 2.87 2.87 - 3.91 3.91 3.91 - - - 5.54 7.821" 25 33.40 1.65 1.65 2.77 2.77 - - 3.38 3.38 3.38 - 4.55 4.55 4.55 - - - 6.35 9.09

1¼" 32 42.16 1.65 1.65 2.77 2.77 - - 3.56 3.56 3.56 - 4.85 4.85 4.85 - - - 6.35 9.701½" 40 48.26 1.65 1.65 2.77 2.77 - - 3.68 3.68 3.68 - 5.08 5.08 5.08 - - - 7.14 10.162" 50 60.33 1.65 1.65 2.77 2.77 - - 3.91 3.91 3.91 - 5.54 5.54 5.54 - - - 8.71 11.07

2½" 65 73.03 2.11 2.11 3.05 3.05 - - 5.16 5.16 5.16 - 7.01 7.01 7.01 - - - 9.53 14.023" 80 88.90 2.11 2.11 3.05 3.05 - - 5.49 5.49 5.49 - 7.62 7.62 7.62 - - - 11.13 15.24

3½" - 101.60 2.11 2.11 3.05 3.05 - - 5.74 5.74 5.74 - 8.08 8.08 8.08 - - - - 16.154" 100 114.30 2.11 2.11 3.05 3.05 - - 6.02 6.02 6.02 - 8.56 8.56 8.56 - 11.13 - 13.49 17.125" 125 141.30 2.77 2.77 3.40 3.40 - - 6.55 6.55 6.55 - 9.53 9.53 9.53 - 12.70 - 15.88 19.056" 150 168.28 2.77 2.77 3.40 3.40 - - 7.11 7.11 7.11 - 10.97 10.97 10.97 - 14.27 - 18.24 21.958" 200 219.08 2.77 2.77 3.76 3.76 6.35 7.04 8.18 8.18 8.18 10.31 12.70 12.70 12.70 15.06 18.24 20.62 23.01 22.23

10" 250 273.05 3.40 3.40 4.19 4.19 6.35 7.80 9.27 9.27 9.27 12.70 12.70 12.70 15.06 18.24 21.41 25.40 28.58 25.4012" 300 323.85 3.96 4.19 4.57 4.57 6.35 8.38 9.53 9.53 10.31 14.27 12.70 12.70 17.45 21.41 25.40 28.58 33.32 25.4014" 350 355.60 3.96 - 4.78 6.35 7.92 9.53 - 9.53 11.13 15.06 - 12.70 19.05 23.80 27.76 31.75 35.71 -16" 400 406.40 4.19 - 4.78 6.35 7.92 9.53 - 9.53 12.70 16.66 - 12.70 21.41 26.19 30.94 36.53 40.46 -18" 450 457.20 4.19 - 4.78 6.35 7.92 11.13 - 9.53 14.27 19.05 - 12.70 23.80 29.36 34.93 39.67 45.24 -20" 500 508.00 4.78 - 5.54 6.35 9.35 12.70 - 9.53 15.06 20.62 - 12.70 26.19 32.54 38.10 44.45 49.99 -22" 550 558.80 4.78 - 5.54 6.35 9.35 12.70 - 9.53 15.88 22.23 - 12.70 28.57 34.92 41.27 47.62 53.97 -24" 600 609.60 5.54 - 6.35 6.35 9.35 14.27 - 9.53 17.45 24.59 - 12.70 30.94 38.89 46.02 52.37 59.51 -26" 650 660.40 - - - 7.92 12.7 - - 9.53 - - - 12.70 - - - - - -28" 700 711.20 - - - 7.92 12.7 15.87 - 9.53 - - - 12.70 - - - - - -30" 750 762.00 - - - 7.92 12.7 15.87 - 9.53 - - - 12.70 - - - - - -32" 800 812.80 - - - 7.92 12.7 15.87 - 9.53 17.45 - - 12.70 - - - - - -34" 850 863.60 - - - 7.92 12.7 15.87 - 9.53 17.45 - - 12.70 - - - - - -36" 900 914.40 - - - 7.92 12.7 15.87 - 9.53 19.05 - - 12.70 - - - - - -38" 950 965.20 - - - - - - - 9.53 - - - 12.70 - - - - - -40" 1000 1016.00 - - - - - - - 9.53 - - - 12.70 - - - - - -42" 1050 1066.80 - - - - - - - 9.53 - - - 12.70 - - - - - -44" 1100 1117.60 - - - - - - - 9.53 - - - 12.70 - - - - - -46" 1150 1168.40 - - - - - - - 9.53 - - - 12.70 - - - - - -48" 1200 1219.20 - - - - - - - 9.53 - - - 12.70 - - - - - -

document.xls 04/13/2023 blad WN Flanges

WELDING NECK FLANGE & PIPE DIMENSIONS

Flange dimensions

D Flange diam. 152.4 mm

H Flange length 63.5 mm

b Flange thkn. incl. RF 19.1 mm Include data of following WN flanges:

d1 Diam. raced face 91.9 mm ANSI B 16.5 125-2500#

k Pitch circle 120.7 mm ANSI B 16.5 Long WN fl. 150-2500#

n Number of bolts 4 pce ANSI B 16.31 Cast iron 25-800#

d2 Diam. boltholes 19.1 mm ANSI B 16.47 - API Std. 605 75-900#

d3 Diameter hub 77.7 mm ANSI B 16.47 - MSS SP-44 150-900#

f Raced face height 1.6 mm BS 10 tables A-T 43-1400#

r Round off 7.9 mm BS 10 Cast iron 200#

g Thickness of gasket 4.0 mm BS 3293 150-600#

L Required stud length 84.2 mm 1) BS 4772 Cast iron PN 10 -12

bt Bolt M16 BS 4504 PN 6 - 100

m Nut height 13 mm DIN 2630-2638 PN 1-160

W Weight 2.58 kg DIN 2627-2629 PN 250-400

DIN Cast iron 2532-33 PN 10-16

Surface finish DIN Cast iron 28604-07 PN 10-40

Stock DN < 24" 6,3-12,5 µm NEN 5831-5835 PN 6 - 40

Stock DN > 24" 12,5-25,0 µm JIS B 2210-2213 PN 5-40

Smooth 3,2-6,3 µm Pressure vessels DIN 28034 -

1) for flange / flange connection

d2

dido

d3

d1kD

f

b

Hs

document.xls 04/13/2023 blad Blind & Slip-on fl.

BLIND & SLIP ON FLANGES

Blind flange acc.:ANSI B 16.5, MSS-SP44BS 3293, DIN 2527

Slip-on flange acc.:DIN 1882, NEN 5818/19DIN 2573/76

Slip-on flange acc.:ANSI B 16.5, MSS-SP44BS 3293, DIN 86029/30

Flange dimensions

D Flange diameter 209.6 mm

h Flange height 52.4 mm

b / b1 Flange thickness 38.2 mm Include data of following flanges:

d1 Diameter RF 127.0 mm SO/BL RF ANSI B 16.5

k Pitch circle bolts 168.1 mm SO/BL RF ANSI B 16.47-MSS SP-44

n Number of bolts 8 pce SO/BL RF ANSI B 16.47-API 650

d2 Diameter boltholes 22.4 mm SORF BS 3293

d3 Diameter hub 117.3 mm SO DIN 2573

f Heigt of RF 6.4 mm SO DIN 2576

d4 Diameter pipe hole 90.7 mm SO DIN 2641-42

g Thickness of gasket 4 mm SO DIN 2655-56

L Required stud length 122.4 mm 1) BL DIN 2527

bt Bolt M20 SORF DIN 86029-30

m Nut height 16 mm SO DIN 1882

W Weight 7.00 kg SO NEN 5818-191) for flange / flange connection Pressure vessels DIN 28031-32-36

D

d1k

d2

b

f

D

k

d 2

b1d4

D

d1k

d2

b

f

d3

h

d4

document.xls 04/13/2023 blad Blind & Slip-on fl.

BLIND & SLIP ON FLANGES

125-1500#

150-900#

75-900#

150-600#

PN 6

PN 10

PN 6-10

PN 16-25

PN 6-100

PN 10-16

PN 10

PN 6-10

D

d1k

d2

b

f

D

k

d 2

b1d4

D

d1k

d2

b

f

d3

h

d4

document.xls 04/13/2023 blad Lapjoint fl.

LAPJOINT FLANGE & STUB-END DIMENSIONS

Flange dimensions

D Flange diameter 584.2 mm

h Flange height 111.3 mm

b1 Flange thickness 53.8 mm Include data of following LJ flanges:

b2 Stub-end height ASA 304.8 mm ANSI B 16.5 150 #

b2 Stub-end height MSS 152.4 mm ANSI B 16.5 300 #

b2 Collar height - mm MSS SP-44 150 #

k Pitch circle 514.3 mm MSS SP-44 300 #

n Number of bolts 20 pce DIN 2641 Carbon steel PN 6

bt Bolt M30 - DIN 2641 Aluminium PN 6

L Required bolt length 170.6 mm DIN 2642 Carbon steel PN 10

s Thickn. Stubend fl. mm Din 2642 Aluminium PN 10

s Thickn. Collar flange 0.0 mm

g Thickness of gasket 7.0 mm

m Thickness of nut 24.0 mm

s1 Thickness pipe 0.0 mm

d1 Stub-end/collar diam. 355.6 mm

d2 Diam. boltholes 31.7 mm W1 Weight flange 70.90 kg

d3 Diam. flangehole 360.2 mm W2 Weight collar - kg

d4 Diameter rim 412.8 mm W2 Weight stub / collar kg

d5 Diameter hub 425.4 mm W2 Weight stub MSS kg

D

k

d 2

b1

d3

d1

b2

d4s

s1

k

d 2

b1

d4

h

d3d5D

d1

b2

s

document.xls 04/13/2023 blad Orifice fl.

WN & SO ORIFICE FLANGES

Flange dimensions

D Flange diam. 647.7 mm

H Flange length 146.1 mm

b Flange thkn. incl. RF 57.2 mm Include data of following flanges:

d1 Diam. raced face 469.9 mm

k Pitch circle 571.5 mm Ansi B 16.36 WN Orifice fl. 300-2500#

n Number of bolts 20.0 pce Ansi B 16.36 SO Orifice fl. 300#

d2 Diam. boltholes 35.1 mm

d3 Diameter hub 482.6 mm

e Centre of tapping hole 23.9 mm

f Raced face height 1.6 mm

r Round off 12.7 mm

g Thickness of gasket 7.0 mm

L Required stud length 183.3 mm 1)

bt Bolt M33

m Nut height 26.0 mm

W Weight 254.4 kg

1) for flange / flange connection

didod3

d1kD

d2

b

f

½"

NP

Tc

Hs

d1kD

d2

b

f

½"

NP

Tc

di

d3

H

document.xls 04/13/2023 blad Fittings

DIMENSIONS of ELBOWS, TEES & CAPSElbow 90º- LR (R=1,5D) acc. ANSI B 16.9

Diam. outside Do 219.08 mm Size

Diam. Inside std. Di 202.72 mm

Diam. Inside XS Di 193.68 mm

Wallth. Std. s 8.18 mm

Wallth. XS s 12.70 mm

Center to end R 304.80 mm

Weight Std. W 20.90 kg

Weight XS W 31.30 kg

Elbow 90º- SR (R=D) acc. ANSI B 16.9






Center to end R 50.80 mm


Weight XS W 0.60 kg

Elbow 45º- LR (R=1,5D) acc. ANSI B 16.9






Center to end B 34.90 mm


Weight XS W 0.49 kg

Straight Tee acc. ANSI B 16.9






Center to end (run) E 177.80 mm

Center to end (branch) C 177.80 mm

End to end F 355.60 mm


Weight XS W 34.70 kg

Cap acc. ANSI B 16.9






Cap length Std. H 38.10 mm

Cap length XS H 44.00 mm


Weight XS W 0.30 kg

D

s

B

B

E E

D

s

D

Do

H

s

document.xls 04/13/2023 blad Fittings

DIMENSIONS of ELBOWS, TEES & CAPS

R

C

D

s

H

s

document.xls 04/13/2023 blad Red. fittings

DIMENSIONS of REDUCERS & REDUCED TEES

Conc. reducer acc. ANSI B16.9 run-size

Diam. outside D1 60.33 mm Size

Diam. Inside Std. Di 52.51 mm


Wallth. Std. s1 3.91 mm

Wallth. XS s1 5.54 mm

Length L 76.20 mm

red.-size

Diam. outside D2 33.40 mm






Weight XS W 0.46 kg

Exc. reducer acc. ANSI B16.9 run-size






Length L 38.10 mm

Center to center M 4.76 mm

red.-size







Weight XS W 0.11 kg

Reduced Tee acc. ANSI B16.9 run-size






Center to end E 63.50 mm

End to end (branch) C 50.80 mm

End to end (run) F 127.00 mm

red.-size







Weight XS W 1.44 kg

s1

s2

L

D2D1

L

D1

D2

s1

s2

M

D2

D1

C

E

s1

E

s2

F

document.xls 04/13/2023 blad Swage nipples

DIMENSIONS of SWAGE NIPPLES

Swage nipples acc. Ansi B 16.5 Size:

Diameter outside runsize D1 17.15 mm

Diameter outside red.size D2 13.72 mm

Nipple length A 64.00 mm

Red. neck length F 16.00 mm

Threaded length runsize H1 10.00 mm

Threaded length red.size H2 8.00 mm

Centre to centre E 1.71 mm

Weight sch. 40 G 0.08 kg



Weight sch. XXS G 0.13 kg

Abbriviations:

BEB Both Ends BevelledBEG Both Ends GroovedBEP Both Ends PlainBET Both Ends ThreadedBLE/GSE Bevelled Large End - Grooved Small EndBLE/PSE Bevelled Large End - Plain Small EndBLE/TSE Bevelled Large End - Threaded Small EndBOE Bevelled One EndGBE Grooved Both EndsGOE Grooved One EndLEBG Large End Bevelled - small end BevelledLEBP Large End Bevelled - small end PlainLEBT Large End Bevelled - small end ThreadedLEGB Large End Grooved - small end BevelledLEGP Large End Grooved - small end PlainLEGT Large End Grooved - small end ThreadedLEPB Large End Plain - small end BevelledLEPG Large End Plain - small end GroovedLEPT Large End Plain - small end ThreadedLETB Large End Threaded - small end BevelledLETP Large End Threaded - small end PlainPBE Plain Both EndsPLE/BSE Plain Large End - Bevelled Small EndPLE/GSE Plain Large End - Grooved Small EndPLE/TSE Plain Large End - Threaded Small EndPOE Plain One EndTBE Threaded Both EndsTLE/BSE Threaded Large End - Bevelled Small EndTLE/GSE Threaded Large End - Grooved Small EndTLE/PSE Threaded Large End - Plain Small EndTOE Threaded One End

H2 D2

H1D1



DIMENSIONS of SWAGE NIPPLES

Bevelled Large End - Grooved Small EndBevelled Large End - Plain Small EndBevelled Large End - Threaded Small End

Large End Bevelled - small end BevelledLarge End Bevelled - small end PlainLarge End Bevelled - small end ThreadedLarge End Grooved - small end BevelledLarge End Grooved - small end PlainLarge End Grooved - small end ThreadedLarge End Plain - small end BevelledLarge End Plain - small end GroovedLarge End Plain - small end ThreadedLarge End Threaded - small end BevelledLarge End Threaded - small end Plain

Plain Large End - Bevelled Small EndPlain Large End - Grooved Small EndPlain Large End - Threaded Small End

Threaded Large End - Bevelled Small EndThreaded Large End - Grooved Small EndThreaded Large End - Plain Small End
