Drill Pipe Performance Sheetwww.NOV.com/GrantPrideco Phone: +1 (281) 878-8000
Pipe Body OD
Drill Pipe Length
Pipe Body Grade
Connection
Tool Joint ID
Tool Joint OD
Pin Tong
Box Tong
Drill Pipe Approximate Length
Nominal Weight DesignationPipe Body Wall Thickness
5.500
0.361
Range2
uGPDS55
4.000
7.000
12
17
Tool Joint SMYS 130,000
Drill Pipe Configuration
Upset Type IEU
S-135
21.90
32.2
SmoothEdge Height 3/32 Raised
(in)
(in)
(in)
(in)
(in)
(in)
(ft)
(in)
(psi)
Max Upset OD (DTE) 5.688(in)
Note: Tong space may include hardfacing.
17
S-135
4.000
7.000
5.500
Range2
12
uGPDS55
0.361
80 % Inspection Class
Drill Pipe Performance
Drill Pipe Adjusted Weight
Fluid Displacement
Fluid Capacity
Drift Size
27.12
0.41
Fluid Capacity
0.89
3.875
0.88
Note: Drill pipe assembly values are best estimates and may vary due to pipe body mill tolerance, internal plastic coating, and other factors.
0.0212 0.0210
Note: Oil field barrel equals 42 US gallons.
Best Estimates(with Coating)(without Coating)
80 % Inspection ClassPerformance of Drill Pipe with Pipe Body at
Max TensionOperational Torque
55,400
39,600
Applied Make-up Torque
Drill-Pipe Length Range2
0 620,600
52,500 422,800
0 620,600
36,000 537,100
(lbs/ft)
(gal/ft)
(gal/ft)
(Bbls/ft)
(in)
(lbs)(ft-lbs)(ft-lbs)
Recommended MUT
Minimum MUT
26.22
0.40
0.90
0.0215
(least accurate)
Nominal
Fluid Displacement 0.0099 0.0095(Bbls/ft)Tension Only
Combined Loading
Tension Only
Combined Loading
Recommended Make-up Torque 55,400
Minimum Make-up Torque 39,600
79,100
1,348,200
Connection Performance uGPDS55 7.000 4.000 )( X 130,000
Tension at Connection Yield
Minimum Tool Joint OD for API Premium Class
Tensile Limited 833,600
1,310,200 1,348,200
Tool Joint Tensile Strength
Tension at Shoulder Separation
Applied Make-up Torque
6.587
Tool Joint Torsional Strength
Tool Joint Dimensions(ft-lbs) (lbs) (lbs)
(in)
(in) (in) (psi)
Balanced OD 6.928(in)
(ft-lbs)
(lbs)
OD ID
Minimum Tool Joint OD for Counterbore
6.523(in)
Note: To maximize connection operational tensile, a MUT (T4) = 40,700 (ft-lbs) should be applied.Note: Recommended make-up torque is the maximum make-up torque that should be applied.
Elevator Shoulder Information
Elevator Capacity
5.812Assumed Elevator Bore Diameter Note: A raised elevator OD increases elevator capacity without affecting make-up torque.
Elevator OD 7.188
Box OD 7.000 6.7197.188
1,315,600 982,300
Worn to BevelDiameter
Nominal Tool JointOD3/32 Raised
SmoothEdge Height
1,545,600
6.587
830,400
Worn to Min TJ OD forAPI Premium Class
(in)
(lbs)
(in)
(in)
Note: Elevator capacity based on assumed Elevator Bore, no wear factor, and contact stress of 110,100psi.
3/32 Raised
Pipe Body Slip Crushing Capacity
Slip Crushing Capacity
Assumed Slip LengthTransverse Load Factor (K)
16.5
4.2
5.5 0.361 S-135( )Pipe Body Configuration OD Wall
80Nominal % Inspection Class API Premium Class
531,600 423,600423,600(lbs)
(in)
(in) (in)
Note: Slip Crushing: Slip crushing load is calculated with the Spiri-Reinhold equation from “Why Does Drill Pipe Fail in the Slip Area” World Oil, 1959 for the slip length and transverse load factor shown and is for reference only. Slip crushing is dependent on the slip design and condition, coefficient of friction, loading conditions, time in slips, drill pipe OD and wall variation, and other factors. Consult with the slip manufacturer for additional information.
Pipe Tensile Strength 786,800 620,600 620,600
Pipe Torsional Strength
80% Pipe Torsional Strength
Burst
Collapse
91,300
73,000
15,507
12,679
71,800
57,400
14,177
7,496
71,800
57,400
14,177
7,496
Pipe Body Performance
TJ/PipeBody Torsional Ratio 1.101.100.87
(lbs)
(ft-lbs)
(psi)
(ft-lbs)
(psi)
Note: Nominal Burst calculated at 87.5% RBW per API.
5.5 0.361 S-135( )Pipe Body Configuration OD Wall(in) (in)
Wall Thickness
Nominal Pipe ID
Cross Sectional Area of OD
Cross Sectional Area of ID
Section Modulus
Polar Section Modulus
0.361
4.778
23.758
17.930
7.031
14.062
5.356
0.289
4.778
22.527
17.930
5.527
11.054
5.356
0.289
4.778
22.527
Cross Sectional Area of Pipe Body
17.930
5.527
11.054
5.828 4.597 4.597
Pipe OD 5.500
Nominal
(in^2)
(in)
(in^3)
(in^3)
(in^2)
(in^2)
(in)
(in)
80 % Inspection Class API Premium Class
02-08-2013Customer Created
Note: The technical information contained herein, including the product performance sheet and other attached documents, is for reference only and should not be construed as a recommendation. The user is fully responsible for the accuracy and suitability of use of the technical information. NOV Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. Drill pipe assembly properties are calculated based on uniform OD and wall thickness. No safety factor is applied. The information provided for various inspection classes and for various wear conditions (remaining body wall) is for information only and does not represent or imply acceptable operating limits. It is the responsibility of the customer and the end user to determine the appropriate performance ratings, acceptable use of the product, maintain safe operational practices, and to apply a prudent safety factor suitable for the application. For API connections that have different pin and box ID’s, tool joint ID refers to the pin ID. Per Chapter B, Section 4 VII of the IADC drilling manual, it is recommended that drilling torque should not exceed 80% of MUT.
www.NOV.com/GrantPrideco/CustomerFeedback
Combined Loading for Drill Pipe atCombined Loading for Drill Pipe at
Operational Limits of Drill Pipe
% Inspection Class80 5.5
uGPDS55 7.000Connection
Pipe Body ODPipe Body
Tool Joint OD
0.361 S-135
130,0004.000 Tool Joint Specified Minimum Yield Strength
Wall Thickness Pipe Body Grade
Tool Joint ID
55,400Recommended Make-up Torque =
Connection Max Tension
Operational Torque
Pipe Body Max Tension
Assembly Max Tension
0
2,800
5,500
8,300
11,100
13,800
16,600
19,400
22,100
24,900
27,600
30,400
33,200
35,900
38,700
41,500
44,200
47,000
49,800
52,500
620,600
620,100
618,800
616,400
613,100
609,000
603,800
597,500
590,400
582,000
572,900
562,200
550,200
537,300
522,600
506,300
488,900
468,900
446,800
422,800
Operational drilling torque is limited by the Make-up Torque.
833,600
833,600
833,600
833,600
833,600
833,600
833,600
833,600
833,600
833,600
833,600
833,600
833,600
833,600
833,600
833,600
833,600
833,600
833,600
833,600
620,600
620,100
618,800
616,400
613,100
609,000
603,800
597,500
590,400
582,000
572,900
562,200
550,200
537,300
522,600
506,300
488,900
468,900
446,800
422,800
39,600Minimum Make-up Torque =
Connection Max Tension
Operational Torque
Pipe Body Max Tension
Assembly Max Tension
0
1,900
3,800
5,700
7,600
9,500
11,400
13,200
15,100
17,000
18,900
20,800
22,700
24,600
26,500
28,400
30,300
32,200
34,100
36,000
620,600
620,400
619,700
618,600
617,100
615,100
612,700
610,000
606,700
602,900
598,700
594,000
588,700
583,000
576,700
569,900
562,600
554,600
546,000
537,100
Operational drilling torque is limited by the Make-up Torque.
1,310,200
1,310,200
1,310,200
1,310,200
1,310,200
1,310,200
1,310,200
1,310,200
1,310,200
1,310,200
1,310,200
1,310,200
1,310,200
1,310,200
1,310,200
1,310,200
1,310,200
1,310,200
1,310,200
1,310,200
620,600
620,400
619,700
618,600
617,100
615,100
612,700
610,000
606,700
602,900
598,700
594,000
588,700
583,000
576,700
569,900
562,600
554,600
546,000
537,100
(in) (in)
(in) (in)
(psi)
(lbs)(ft-lbs) (lbs) (lbs) (ft-lbs) (lbs) (lbs) (lbs)
(ft-lbs) (ft-lbs)
Note: Recommended MUT should always be used when possible. If not possible, MUT should be as close to Recommended MUT as possible.
Note: The technical information contained herein, including the product performance sheet and other attached documents, is for reference only and should not be construed as a recommendation. The user is fully responsible for the accuracy and suitability of use of the technical information. NOV Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. Drill pipe assembly properties are calculated based on uniform OD and wall thickness. No safety factor is applied. The information provided for various inspection classes and for various wear conditions (remaining body wall) is for information only and does not represent or imply acceptable operating limits. It is the responsibility of the customer and the end user to determine the appropriate performance ratings, acceptable use of the product, maintain safe operational practices, and to apply a prudent safety factor suitable for the application. For API connections that have different pin and box ID’s, tool joint ID refers to the pin ID. Per Chapter B, Section 4 VII of the IADC drilling manual, it is recommended that drilling torque should not exceed 80% of MUT.
1,310,200
Connection Max Tension
Make-up Torque
Min MUT
Rec MUT
39,600
41,400
43,100
44,900
46,600
48,400
50,100
51,900
53,600
55,400
1,325,300
1,265,600
1,202,400
1,142,700
1,079,400
1,019,700
956,500
896,800
833,600
(ft-lbs) (lbs)
02-08-2013
Make-up Torque RangeConnection
Connection Wear Table
ToolJoint OD
Connection Max Tension
Connection Wear
Rec MUT
7
6.957
6.913
6.87
6.827
6.783
6.74
6.696
6.653
6.61
6.566
6.523
55,400
55,300
55,300
55,000
53,000
51,100
49,200
47,200
45,400
43,500
41,600
39,800
39,600
39,500
39,500
39,300
37,900
36,500
35,100
33,700
32,400
31,100
29,700
28,400
Connection Max Tension
Min MUT
833,600
825,400
813,300
811,600
866,900
916,900
965,700
1,015,800
1,058,200
1,102,100
1,143,900
1,181,200
1,310,200
1,322,600
1,339,600
1,346,100
1,320,100
1,290,100
1,259,300
1,228,800
1,201,100
1,173,200
1,141,800
1,113,400
New OD
Worn OD
Connection Torsional Strength
79,100
79,000
78,900
78,600
75,800
73,000
70,200
67,500
64,800
62,100
59,400
56,800
Combined Loading Table (Torque-Tension)Pipe Body
0
620,600
6,500
618,100
13,000
610,300
19,600
597,000
26,100
578,100
32,600
552,900
Pipe Body Torque
Pipe Body Max Tension
39,100
520,400
45,700
478,500
52,200
425,800
58,700
356,900
65,200
259,100
71,700
24,200
% Inspection Class80 5.5Pipe Body ODPipe Body 0.361 S-135Wall Thickness Pipe Body Grade
uGPDS55 7.000Connection Tool Joint OD 130,0004.000 Tool Joint Specified Minimum Yield Strength
Tool Joint ID(in)
(ft-lbs)
(psi)(in)
(in) (ft-lbs) (lbs) (ft-lbs) (lbs)
(in) (in)
(ft-lbs)
(lbs)
Note: The technical information contained herein, including the product performance sheet and other attached documents, is for reference only and should not be construed as a recommendation. The user is fully responsible for the accuracy and suitability of use of the technical information. NOV Grant Prideco cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. Drill pipe assembly properties are calculated based on uniform OD and wall thickness. No safety factor is applied. The information provided for various inspection classes and for various wear conditions (remaining body wall) is for information only and does not represent or imply acceptable operating limits. It is the responsibility of the customer and the end user to determine the appropriate performance ratings, acceptable use of the product, maintain safe operational practices, and to apply a prudent safety factor suitable for the application. For API connections that have different pin and box ID’s, tool joint ID refers to the pin ID. Per Chapter B, Section 4 VII of the IADC drilling manual, it is recommended that drilling torque should not exceed 80% of MUT.
02-08-2013