Download pdf - Hmt ppt.pptx

Transcript
  • 8/14/2019 Hmt ppt.pptx

    1/25

    1

    SUBMITTED TO: SUBMITTED BY:ER. RAMESH CHAND PARVEEN KUMARHOD MECH. DEPTT. ROLL NO. 4611327

  • 8/14/2019 Hmt ppt.pptx

    2/25

    2

  • 8/14/2019 Hmt ppt.pptx

    3/25

    3

  • 8/14/2019 Hmt ppt.pptx

    4/25

    4

    Sand preparation,

    Core making,

    Moulding , pouring and

    shakeouts,

    Melting,

    Cleaning

  • 8/14/2019 Hmt ppt.pptx

    5/25

    Sand plant system,

    Sand handling system,

    Core making and baking system,

    Moulding making and handling, Core setting system,

    Melting system,

    Metal pouring system, Testing lab,

    Fettling section,

    Painting and printing section.

    5

  • 8/14/2019 Hmt ppt.pptx

    6/25

    In heavy machine shop all the heavy part of tractor aremachined like gear box housing, Main transmissionhousing, Front cover etc. all the parts undergoes differentoperations like milling, boring, drilling, slotting etc. in HMSsection.

    The entire machines in this section are special purposemachine; it means the machine doing special or specificoperation on a job.

    The advantage of special purpose machine is that itincreases the rate of production. The machines are capableof machining any number of identical parts in a very less

    time. Parts Machined in HMS Gear box housing Main transmission housing

    6

  • 8/14/2019 Hmt ppt.pptx

    7/25

    Gear box housing is used for fitment of gears and shafts.

    The material used for Gear box housing is cast iron.

    7

    Process of Gear Box Housing1. Marking the gear box housing2. Bottom Milling

    3. Drill the location hole4. Top Milling5. Front and Rear Cover6. Left And Right Milling7. Boring

    8. Bottom Milling Housing9. Tapping10.Drill for Clutch and Pedal11.Washing12.Inspection of the Gear box housing

    according to design.

  • 8/14/2019 Hmt ppt.pptx

    8/25

    Main Transmission Housing is manufacturing in heavy machine

    shop. M.T. Housing is used for setup the differential and axleassembly. Material used for M.T Housing is cast iron.

    8

    Manufacturing procedure of M.T Housing

    1. Marking M.T Housing

    2. Horizontal Milling.3. Radial Drilling4. Milling of M.T. Housing5. Boring

    6. Boring finish7. Washing8. Inspection

  • 8/14/2019 Hmt ppt.pptx

    9/25

    As the name suggests that in thissection light parts or small parts of

    tractors are machined such as speedgears of tractor, sun & planet gearscrown wheel, PTO shaft, clutch

    shaft, front and rear axle.

    9

  • 8/14/2019 Hmt ppt.pptx

    10/25

    SPUR GEARS& HELICAL GEARS

    10

    PTO SHAFT

  • 8/14/2019 Hmt ppt.pptx

    11/25

    Bevel Pinion Shaft: Bevel pinion shaft is used for transmit the power from gear

    box to differential.

    The material used for it is low carbon steel. Process for Bevel Pinion Shaft Raw material Material cutting. Facing and centering

    Turning on s-pilot machine. Inspection according to drawing. Gear hobbing. Washing and inspection work piece. Gas carburizing & hardening.

    grinding. Tempering. Washing & inspection of the bevel pinion shaft.

    11

  • 8/14/2019 Hmt ppt.pptx

    12/25

    ENGINE IS THEMOST IMPORTANTPART OF ANYAUTOMOBILE

    ENGINE IS THEHEART OFAUTOMOBILE

    IT MAY BE PETROLENGINE OR DIESELENGINE ETC.

    12

  • 8/14/2019 Hmt ppt.pptx

    13/25

    CRANK CASE PISTON

    13

  • 8/14/2019 Hmt ppt.pptx

    14/25

    CAM SHAFT

    FLY WHEEL

    14

  • 8/14/2019 Hmt ppt.pptx

    15/25

    PISTON SLEEVE CRANK SHAFT

    15

  • 8/14/2019 Hmt ppt.pptx

    16/25

    FRONT COVER

    16

    ASSEMBLY LINE

  • 8/14/2019 Hmt ppt.pptx

    17/25

    STARTER ALTERNATOR

    17

    IPD SHAFT

  • 8/14/2019 Hmt ppt.pptx

    18/25

    CLUTCH PLATE PRESSURE PLATE

    18

  • 8/14/2019 Hmt ppt.pptx

    19/25

    The engines of different models are assembledand tested in this shop as per standard procedures.

    19

    Engine Assembly

    In this shop, whole of the engine is completed and ready forthe tractor assembly. The various parts of engine frommanufacturing section are brought in this section and they

    are assembled to prepare the whole engine. The engineassembly can be divided into following steps.

    Washing of crank case with a special soap solution and

  • 8/14/2019 Hmt ppt.pptx

    20/25

    Washing of crank case with a special soap solution anddrying it by means of air jets.

    Fitting of cylinder sleeve.

    Fixing of studs and fitment of crank shaft in crank case.

    Inserting pistons in cylinder sleeve. Assembling the lubrication pump and fitment of cam

    shaft.

    Mounting of flywheel with clutch assembly.

    Fixing of cylinder head on the top of the cylindersleeve.

    Putting tappets, push rods and rocker arm for openingand closing the valves.

    Attaching the fuel filters and oil filter. Mounting the fuel injection pump and injection lines.

    Fitting the self starter and alternator.

    Now the engine is ready for testing. Among the allparts fuel injection system is the heart of the engine.

    20

    Cl t h

  • 8/14/2019 Hmt ppt.pptx

    21/25

    Clutch In HMT, all the tractors have spring loaded dry

    friction type dual clutch, various parts of clutchare: pressure plate, clutch plate and spring. Release

    bearings mounted on PTO shaft are always incontact with shaft when the clutch is pressed therelease bearing depress with release level withfurther produce tension in compression springsand as a result of this the gap is produce between

    pressure plate and flywheel and disc become freeon pressing the clutch up to 7cm, the drive toclutch shaft is stopped and when full clutch ispressed drive to PTO as well as clutch shaft is alsostopped. But in first position PTO rotates and

    wheels are in standstill position. The main function of clutch is to engage or

    disengage the power coming from the engine.

    21

  • 8/14/2019 Hmt ppt.pptx

    22/25

    On the basis of working there are two type ofclutches.

    Single clutch Double clutch

    Generally double clutch is used in HMT Tractor

    DOUBLE CLUTCH:- This clutch is providedwith two clutch plates one for the maintransmission & the other for P.T.O drive. In b/wthe two clutch plates, an intermediate plate is

    provided. Normally, six release levers thepurpose of disengaging the clutch plates Out ofsix, three are for engine disengaging & the restof three are for disengaging the P.T.O drive.

    22

  • 8/14/2019 Hmt ppt.pptx

    23/25

    23

    It is the rear part of the tractor cheesy. It also

    consisting the P.T.O. shaft, which is used to the threshers,pumps and other accessories components with the help opulley attached on it.

    Following are main parts of differential housing:-Crown wheel.

    Differential assembly. ( with sun and star gear)

    P.T.O. shaft.

    Bearing. Etc

  • 8/14/2019 Hmt ppt.pptx

    24/25

    it is a special arrangement of gears to permit

    one of the rear wheel of the tractor to rotateslower or faster than the other. While turningthe tractor on curved path, the inner wheel hasto travel lesser distance than the outer wheel.

    24

    The bevel pinion is in mesh with largebevel wheel known as crown wheel.The main function of crown wheel is

    to transmit power through right angledrive to suit the tractor wheel.

  • 8/14/2019 Hmt ppt.pptx

    25/25

    25