Download pdf - Lenze Mains Chokes - ValinOnline.com☐☐☐5524☐☐7.50 0 e84av eln3-0170h017-001 17.0 178x74.5x140 3.9 ☐☐☐7524☐☐11.0 0 e84av eln3-0150h024-001 24.0 219x110.5x170 8.2

Mains chokes

Mains choke

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

https://www.clrwtr.com/Catalog/Manufacturers/Lenze-Americas/Drives

8.1 - 4Mains chokeGeneral information

8.1 - 4Assignment of the new and previous mains chokes

8.1 - 6Servo Drives 9400 HighLineInverter/mains choke assignment

8.1 - 8Inverter Drives 8400 TopLine

8.1 - 10Inverter Drives 8400 HighLine

8.1 - 12Inverter Drives 8400 StateLine

8.1 - 14Inverter Drives 8400 BaseLine

8.1 - 169300 servo inverters

8.1 - 18ECS servo system

8.1 - 209300 vector servo inverters

8.1 - 228200 vector inverters

8.1 - 27Dimensions

Mains chokeContents

8.1


Mains choke

Amains choke is an inductive resistorwhich is connected in themainscable of the power supplymodule. The use of amains choke providesthe following advantages:• Fewer effects on the mains:The wave form of the mains current is a close approximation to asine wave.

• Reduction in the effective mains current:Reduction of mains, cable and fuse loads

Mains chokes can be used without restrictions in conjunction withRFI filters and/or sinusoidal filters.

Please note:Mains choke: The use of a mains choke slightly reduces the mains voltage at the

input of the inverter - the typical voltage drop across themains chokeat the rated values is around 4%.

Assignment of the new and previous mains chokes

In the course of the product update, we have revised and simplifiedthe assignments of the inverters. Hence, we can provide a uniformassignment for all inverters of our product range. Thismakes it easierfor the customer to select the right component.

The followingpages serveasamigrationhelp showing theassignmentof theoldandnewchokes. The secondhalf of thedocument comparesthe dimensions in order to ensure an easy change.

Lenze | V01-en_GB-08/20148.1 - 4

Mains chokeGeneral information

8.1


Assignment of the new and previous mains chokes

ƒ Depending on the device, a smaller or biggermains choke can beused via the mains current, see inverter/mains choke assign-ments.

ƒ This table shows the previous mains choke on the left and thenew ones on the right.

ƒ Whenmains chokes are used in a DC bus connection, the assign-ment old/newmains chokes is only applicable to a limited extent.For this application case, thepower reservesof the feedingdeviceshave to be recalculated.

DimensionsRated in-ductance

Rated cur-rent

Product keyDimensionsRated in-ductance

Rated cur-rent

Product key

Mains chokeMains choke

h x b x tLNINh x b x tLNIN[mm][mH][A][mm][mH][A]

56 x 77 x 10020.01.50EZAELN3002B20380 x 68 x 9224.02.00EZN3A2400H002

56 x 77 x 10060 x 95 x 114

15.07.40

2.004.00

EZAELN3002B153EZAELN3004B742

129 x 61 x 10515.03.00ELN3-1500H003-001

60 x 95 x 1147.404.00EZAELN3004B742129 x 70 x 1059.004.00ELN3-0900H004-001

69 x 95 x 1174.906.00EZAELN3006B492148 x 61 x 1226.806.00ELN3-0680H006-001

85 x 120 x 13785 x 120 x 134

3.702.90

8.0010.0


148 x 63 x 1225.007.00ELN3-0500H007-001

85 x 120 x 13495 x 120 x 134

2.901.80

10.016.0


178 x 89.5 x 1422.5013.0ELN3-0250H013-001

95 x 120 x 13495 x 155 x 162

1.801.50

16.020.0


178 x 74.5 x 1401.7017.0ELN3-0170H017-001

95 x 155 x 162110 x 155 x 167

1.501.18

20.025.0

EZAELN3020B152EZAELN3025B122219x110.5 x 1701.5024.0ELN3-0150H024-001

110 x 155 x 1670.8435.0EZAELN3035B841110 x 155 x 167110 x 155 x 167

0.980.84

30.035.0


219 x 135 x 2250.8835.0ELN3-0088H035-001

185 x 112 x 196112 x 185 x 196

0.740.65

40.045.0

EZAELN3040B741EZAELN3045B651219 x 135 x 2250.7545.0ELN3-0075H045-001

122 x 185 x 2070.4763.0EZAELN3063B471112 x 185 x 208122 x 185 x 207

0.590.47

50.063.0


267 x 130 x 2700.5555.0ELN3-0055H055-001

122 x 185 x 207125 x 210 x 239

0.470.37

63.080.0

EZAELN3063B471EZAELN3080B371267 x 175 x 2700.3885.0ELN3-0038H085-001

115 x 267 x 2010.3390.0EZAELN3090B331115 x 267 x 201139 x 267 x 201

0.330.30

90.0100


267 x 150 x 2020.27105ELN3-0027H105-001

291 x 139 x 208291 x 149 x 210

0.240.19

125160


265 x 140 x 2680.22130ELN3-0022H130

291 x 149 x 210316 x 164 x 230

0.190.17

160180


265 x 170 x 2680.17170ELN3-0017H170

352 x 144 x 2640.16200EZAELN3200B151330 x 170 x 3020.14200ELN3-0014H200

8.1 - 5Lenze | V01-en_GB-08/2014

Mains chokeGeneral information

8.1


Servo Drives 9400 HighLine

Assignment of the previous mains chokes

MassDimensionsRated currentProduct keyMainsvoltage

Typical motorpower

Mains chokeSingle Drive4-poleasynchron-ous motor

mh x b x tINUACP

[kg][mm][A][V][kW]

1.2129 x 61 x 1053.00ELN3-1500H003-001E94AS☐E0024

3AC180 ...550

0.37

E94AS☐E00340.75

1.5129 x 70 x 1054.00ELN3-0900H004-001E94AS☐E00441.50

2.6148 x 63 x 1227.00ELN3-0500H007-001E94AS☐E00743.00

5.3178 x 89.5 x 14213.0ELN3-0250H013-001E94AS☐E01345.50

3.9178 x 74.5 x 14017.0ELN3-0170H017-001E94AS☐E01747.50

8.2219 x 110.5 x 17024.0ELN3-0150H024-001E94AS☐E024411.0

ƒ The mains choke is integrated in the Single Drives as of a 32 Arated current.

Lenze | V01-en_GB-08/20148.1 - 6

Mains chokeInverter/mains choke assignment

8.1


Servo Drives 9400 HighLine

Assignment of the newmains chokes


Typical motorpower

Mains chokeSingle Drive4-poleasynchron-ous motor

mh x b x tINUACP

[kg][mm][A][V][kW]

0.556 x 77 x 1002.00EZAELN3002B153E94AS☐E0024

3AC180 ...550

0.37

1.360 x 95 x 1144.00EZAELN3004B742E94AS☐E00340.75

1.569 x 95 x 1176.00EZAELN3006B492E94AS☐E00441.50

2.085 x 120 x 13410.0EZAELN3010B292E94AS☐E00743.00

3.895 x 155 x 16220.0EZAELN3020B152E94AS☐E01345.50

5.8110 x 155 x 167

25.0EZAELN3025B122E94AS☐E01747.50

6.035.0EZAELN3035B841E94AS☐E024411.0

ƒ The mains choke is integrated in the Single Drives as of a 32 Arated current.

8.1 - 7Lenze | V01-en_GB-08/2014


8.1


Inverter Drives 8400 TopLine

Assignment of the previous mains chokesOperation with rated power


Typical motorpower

Mains chokeInverter4-poleasynchron-ous motor

mh x b x tINUACP

[kg][mm][A][V][kW]

1.2129 x 61 x 1053.00ELN3-1500H003-001

E84AV☐☐☐3714☐☐0

3AC320 ...550

0.37

E84AV☐☐☐5514☐☐00.55

E84AV☐☐☐7514☐☐0 1)0.75

2.0148 x 61 x 1226.00ELN3-0680H006-001

E84AV☐☐☐1124☐☐01.10

E84AV☐☐☐1524☐☐01.50

E84AV☐☐☐2224☐☐0 1)2.20

2.6148 x 63 x 1227.00ELN3-0500H007-001E84AV☐☐☐3024☐☐03.00

5.3178 x 89.5 x 14213.0ELN3-0250H013-001E84AV☐☐☐4024☐☐04.00

E84AV☐☐☐5524☐☐0 1)5.50

3.9178 x 74.5 x 14017.0ELN3-0170H017-001E84AV☐☐☐7524☐☐07.50

8.2219 x 110.5 x 17024.0ELN3-0150H024-001E84AV☐☐☐1134☐☐0 1)11.0

10.2

219 x 135 x 225

35.0ELN3-0088H035-001E84AV☐☐☐1534☐☐015.0

10.445.0ELN3-0075H045-001E84AV☐☐☐1834☐☐0 1)18.5

E84AV☐☐☐2234☐☐0 1)22.0

13.2267 x 130 x 27055.0ELN3-0055H055-001E84AV☐☐☐3034☐☐0 1)30.0

20.6267 x 175 x 27085.0ELN3-0038H085-001E84AV☐☐☐3734☐☐0 1)37.0

E84AV☐☐☐4534☐☐0 1)45.0

Operation with increased power output


Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

1.2129 x 61 x 1053.00ELN3-1500H003-001E84AV☐☐☐3714☐☐0

3AC320 ...550

0.55

E84AV☐☐☐5514☐☐00.75

2.0148 x 61 x 1226.00ELN3-0680H006-001

E84AV☐☐☐7514☐☐01.10

E84AV☐☐☐1124☐☐01.50

E84AV☐☐☐1524☐☐02.20

2.6148 x 63 x 1227.00ELN3-0500H007-001E84AV☐☐☐2224☐☐03.00

5.3178 x 89.5 x 14213.0ELN3-0250H013-001E84AV☐☐☐3024☐☐04.00

E84AV☐☐☐4024☐☐05.50

3.9178 x 74.5 x 14017.0ELN3-0170H017-001E84AV☐☐☐5524☐☐07.50

8.2219 x 110.5 x 17024.0ELN3-0150H024-001E84AV☐☐☐7524☐☐011.0

10.2219 x 135 x 225

35.0ELN3-0088H035-001E84AV☐☐☐1134☐☐015.0

10.445.0ELN3-0075H045-001E84AV☐☐☐1834☐☐022.0

13.2267 x 130 x 27055.0ELN3-0055H055-001E84AV☐☐☐2234☐☐0 1)30.0

20.6267 x 175 x 27085.0ELN3-0038H085-001E84AV☐☐☐3034☐☐0 1)37.0

E84AV☐☐☐3734☐☐0 1)45.0

20.0267 x 150 x 202105ELN3-0027H105-001E84AV☐☐☐4534☐☐0 1)55.0

Operation only permitted with mains choke1)

Lenze | V01-en_GB-08/20148.1 - 8


8.1


Inverter Drives 8400 TopLine

Assignment of the newmains chokesOperation with rated power


Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

0.556 x 77 x 1002.00EZAELN3002B153E84AV☐☐☐3714☐☐0

3AC320 ...550

0.37

1.360 x 95 x 1144.00EZAELN3004B742

E84AV☐☐☐5514☐☐00.55

E84AV☐☐☐7514☐☐0 1)0.75

E84AV☐☐☐1124☐☐01.10

1.569 x 95 x 1176.00EZAELN3006B492E84AV☐☐☐1524☐☐01.50

E84AV☐☐☐2224☐☐0 1)2.20

1.985 x 120 x 1378.00EZAELN3008B372E84AV☐☐☐3024☐☐03.00

2.085 x 120 x 13410.0EZAELN3010B292E84AV☐☐☐4024☐☐04.00

2.795 x 120 x 13416.0EZAELN3016B182E84AV☐☐☐5524☐☐0 1)5.50

3.895 x 155 x 16220.0EZAELN3020B152E84AV☐☐☐7524☐☐07.50

5.8110 x 155 x 167

25.0EZAELN3025B122E84AV☐☐☐1134☐☐0 1)11.0

6.035.0EZAELN3035B841E84AV☐☐☐1534☐☐015.0

8.3112 x 185 x 19645.0EZAELN3045B651E84AV☐☐☐1834☐☐0 1)18.5

8.4112 x 185 x 20850.0EZAELN3050B591E84AV☐☐☐2234☐☐0 1)22.0

9.7122 x 185 x 20763.0EZAELN3063B471E84AV☐☐☐3034☐☐0 1)30.0

12.5125 x 210 x 23980.0EZAELN3080B371E84AV☐☐☐3734☐☐0 1)37.0

16.0115 x 267 x 20190.0EZAELN3090B331E84AV☐☐☐4534☐☐0 1)45.0



Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

0.556 x 77 x 1002.00EZAELN3002B153E84AV☐☐☐3714☐☐0

3AC320 ...550

0.55

1.360 x 95 x 1144.00EZAELN3004B742

E84AV☐☐☐5514☐☐00.75

E84AV☐☐☐7514☐☐01.10

E84AV☐☐☐1124☐☐01.50

1.569 x 95 x 1176.00EZAELN3006B492E84AV☐☐☐1524☐☐02.20

1.985 x 120 x 1378.00EZAELN3008B372E84AV☐☐☐2224☐☐03.00

2.085 x 120 x 13410.0EZAELN3010B292E84AV☐☐☐3024☐☐04.00

2.795 x 120 x 13416.0EZAELN3016B182E84AV☐☐☐4024☐☐05.50

3.895 x 155 x 16220.0EZAELN3020B152E84AV☐☐☐5524☐☐07.50

5.8110 x 155 x 167

25.0EZAELN3025B122E84AV☐☐☐7524☐☐011.0

5.930.0EZAELN3030B982E84AV☐☐☐1134☐☐015.0

8.3112 x 185 x 19645.0EZAELN3045B651E84AV☐☐☐1834☐☐022.0

9.7122 x 185 x 20763.0EZAELN3063B471E84AV☐☐☐2234☐☐0 1)30.0

12.5125 x 210 x 23980.0EZAELN3080B371E84AV☐☐☐3034☐☐0 1)37.0

16.0115 x 267 x 20190.0EZAELN3090B331E84AV☐☐☐3734☐☐0 1)45.0

19.0139 x 267 x 201100EZAELN3100B301E84AV☐☐☐4534☐☐0 1)55.0


8.1 - 9Lenze | V01-en_GB-08/2014


8.1


Inverter Drives 8400 HighLine



Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

1.2129 x 61 x 1053.00ELN3-1500H003-001

E84AV☐☐☐3714☐☐0

3AC320 ...550

0.37

E84AV☐☐☐5514☐☐00.55

E84AV☐☐☐7514☐☐0 1)0.75

2.0148 x 61 x 1226.00ELN3-0680H006-001

E84AV☐☐☐1124☐☐01.10

E84AV☐☐☐1524☐☐01.50

E84AV☐☐☐2224☐☐0 1)2.20

2.6148 x 63 x 1227.00ELN3-0500H007-001E84AV☐☐☐3024☐☐03.00

5.3178 x 89.5 x 14213.0ELN3-0250H013-001E84AV☐☐☐4024☐☐04.00

E84AV☐☐☐5524☐☐0 1)5.50

3.9178 x 74.5 x 14017.0ELN3-0170H017-001E84AV☐☐☐7524☐☐07.50

8.2219 x 110.5 x 17024.0ELN3-0150H024-001E84AV☐☐☐1134☐☐0 1)11.0

10.2

219 x 135 x 225

35.0ELN3-0088H035-001E84AV☐☐☐1534☐☐015.0

10.445.0ELN3-0075H045-001E84AV☐☐☐1834☐☐0 1)18.5

E84AV☐☐☐2234☐☐0 1)22.0

13.2267 x 130 x 27055.0ELN3-0055H055-001E84AV☐☐☐3034☐☐0 1)30.0

20.6267 x 175 x 27085.0ELN3-0038H085-001E84AV☐☐☐3734☐☐0 1)37.0

E84AV☐☐☐4534☐☐0 1)45.0



Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

1.2129 x 61 x 1053.00ELN3-1500H003-001E84AV☐☐☐3714☐☐0

3AC320 ...550

0.55

E84AV☐☐☐5514☐☐00.75

2.0148 x 61 x 1226.00ELN3-0680H006-001

E84AV☐☐☐7514☐☐01.10

E84AV☐☐☐1124☐☐01.50

E84AV☐☐☐1524☐☐02.20

2.6148 x 63 x 1227.00ELN3-0500H007-001E84AV☐☐☐2224☐☐03.00

5.3178 x 89.5 x 14213.0ELN3-0250H013-001E84AV☐☐☐3024☐☐04.00

E84AV☐☐☐4024☐☐05.50

3.9178 x 74.5 x 14017.0ELN3-0170H017-001E84AV☐☐☐5524☐☐07.50

8.2219 x 110.5 x 17024.0ELN3-0150H024-001E84AV☐☐☐7524☐☐011.0

10.2219 x 135 x 225

35.0ELN3-0088H035-001E84AV☐☐☐1134☐☐015.0

10.445.0ELN3-0075H045-001E84AV☐☐☐1834☐☐022.0

13.2267 x 130 x 27055.0ELN3-0055H055-001E84AV☐☐☐2234☐☐0 1)30.0

20.6267 x 175 x 27085.0ELN3-0038H085-001E84AV☐☐☐3034☐☐0 1)37.0

E84AV☐☐☐3734☐☐0 1)45.0

20.0267 x 150 x 202105ELN3-0027H105-001E84AV☐☐☐4534☐☐0 1)55.0


Lenze | V01-en_GB-08/20148.1 - 10


8.1


Inverter Drives 8400 HighLine



Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

0.556 x 77 x 1002.00EZAELN3002B153E84AV☐☐☐3714☐☐0

3AC320 ...550

0.37

1.360 x 95 x 1144.00EZAELN3004B742

E84AV☐☐☐5514☐☐00.55

E84AV☐☐☐7514☐☐0 1)0.75

E84AV☐☐☐1124☐☐01.10

1.569 x 95 x 1176.00EZAELN3006B492E84AV☐☐☐1524☐☐01.50

E84AV☐☐☐2224☐☐0 1)2.20

1.985 x 120 x 1378.00EZAELN3008B372E84AV☐☐☐3024☐☐03.00

2.085 x 120 x 13410.0EZAELN3010B292E84AV☐☐☐4024☐☐04.00

2.795 x 120 x 13416.0EZAELN3016B182E84AV☐☐☐5524☐☐0 1)5.50

3.895 x 155 x 16220.0EZAELN3020B152E84AV☐☐☐7524☐☐07.50

5.8110 x 155 x 167

25.0EZAELN3025B122E84AV☐☐☐1134☐☐0 1)11.0

6.035.0EZAELN3035B841E84AV☐☐☐1534☐☐015.0

8.3112 x 185 x 19645.0EZAELN3045B651E84AV☐☐☐1834☐☐0 1)18.5

8.4112 x 185 x 20850.0EZAELN3050B591E84AV☐☐☐2234☐☐0 1)22.0

9.7122 x 185 x 20763.0EZAELN3063B471E84AV☐☐☐3034☐☐0 1)30.0

12.5125 x 210 x 23980.0EZAELN3080B371E84AV☐☐☐3734☐☐0 1)37.0

16.0115 x 267 x 20190.0EZAELN3090B331E84AV☐☐☐4534☐☐0 1)45.0



Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

0.556 x 77 x 1002.00EZAELN3002B153E84AV☐☐☐3714☐☐0

3AC320 ...550

0.55

1.360 x 95 x 1144.00EZAELN3004B742

E84AV☐☐☐5514☐☐00.75

E84AV☐☐☐7514☐☐01.10

E84AV☐☐☐1124☐☐01.50

1.569 x 95 x 1176.00EZAELN3006B492E84AV☐☐☐1524☐☐02.20

1.985 x 120 x 1378.00EZAELN3008B372E84AV☐☐☐2224☐☐03.00

2.085 x 120 x 13410.0EZAELN3010B292E84AV☐☐☐3024☐☐04.00

2.795 x 120 x 13416.0EZAELN3016B182E84AV☐☐☐4024☐☐05.50

3.895 x 155 x 16220.0EZAELN3020B152E84AV☐☐☐5524☐☐07.50

5.8110 x 155 x 167

25.0EZAELN3025B122E84AV☐☐☐7524☐☐011.0

5.930.0EZAELN3030B982E84AV☐☐☐1134☐☐015.0

8.3112 x 185 x 19645.0EZAELN3045B651E84AV☐☐☐1834☐☐022.0

9.7122 x 185 x 20763.0EZAELN3063B471E84AV☐☐☐2234☐☐0 1)30.0

12.5125 x 210 x 23980.0EZAELN3080B371E84AV☐☐☐3034☐☐0 1)37.0

16.0115 x 267 x 20190.0EZAELN3090B331E84AV☐☐☐3734☐☐0 1)45.0

19.0139 x 267 x 201100EZAELN3100B301E84AV☐☐☐4534☐☐0 1)55.0


8.1 - 11Lenze | V01-en_GB-08/2014


8.1


Inverter Drives 8400 StateLine



Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

1.2129 x 61 x 1053.00ELN3-1500H003-001

E84AV☐☐☐3714☐☐0

3AC320 ...550

0.37

E84AV☐☐☐5514☐☐00.55

E84AV☐☐☐7514☐☐0 1)0.75

2.0148 x 61 x 1226.00ELN3-0680H006-001

E84AV☐☐☐1124☐☐01.10

E84AV☐☐☐1524☐☐01.50

E84AV☐☐☐2224☐☐0 1)2.20

2.6148 x 63 x 1227.00ELN3-0500H007-001E84AV☐☐☐3024☐☐03.00

5.3178 x 89.5 x 14213.0ELN3-0250H013-001E84AV☐☐☐4024☐☐04.00

E84AV☐☐☐5524☐☐0 1)5.50

3.9178 x 74.5 x 14017.0ELN3-0170H017-001E84AV☐☐☐7524☐☐07.50

8.2219 x 110.5 x 17024.0ELN3-0150H024-001E84AV☐☐☐1134☐☐0 1)11.0

10.2

219 x 135 x 225

35.0ELN3-0088H035-001E84AV☐☐☐1534☐☐015.0

10.445.0ELN3-0075H045-001E84AV☐☐☐1834☐☐0 1)18.5

E84AV☐☐☐2234☐☐0 1)22.0

13.2267 x 130 x 27055.0ELN3-0055H055-001E84AV☐☐☐3034☐☐0 1)30.0

20.6267 x 175 x 27085.0ELN3-0038H085-001E84AV☐☐☐3734☐☐0 1)37.0

E84AV☐☐☐4534☐☐0 1)45.0



Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

1.2129 x 61 x 1053.00ELN3-1500H003-001E84AV☐☐☐3714☐☐0

3AC320 ...550

0.55

E84AV☐☐☐5514☐☐00.75

2.0148 x 61 x 1226.00ELN3-0680H006-001

E84AV☐☐☐7514☐☐01.10

E84AV☐☐☐1124☐☐01.50

E84AV☐☐☐1524☐☐02.20

2.6148 x 63 x 1227.00ELN3-0500H007-001E84AV☐☐☐2224☐☐03.00

5.3178 x 89.5 x 14213.0ELN3-0250H013-001E84AV☐☐☐3024☐☐04.00

E84AV☐☐☐4024☐☐05.50

3.9178 x 74.5 x 14017.0ELN3-0170H017-001E84AV☐☐☐5524☐☐07.50

8.2219 x 110.5 x 17024.0ELN3-0150H024-001E84AV☐☐☐7524☐☐011.0

10.2219 x 135 x 225

35.0ELN3-0088H035-001E84AV☐☐☐1134☐☐015.0

10.445.0ELN3-0075H045-001E84AV☐☐☐1834☐☐022.0

13.2267 x 130 x 27055.0ELN3-0055H055-001E84AV☐☐☐2234☐☐0 1)30.0

20.6267 x 175 x 27085.0ELN3-0038H085-001E84AV☐☐☐3034☐☐0 1)37.0

E84AV☐☐☐3734☐☐0 1)45.0

20.0267 x 150 x 202105ELN3-0027H105-001E84AV☐☐☐4534☐☐0 1)55.0


Lenze | V01-en_GB-08/20148.1 - 12


8.1


Inverter Drives 8400 StateLine



Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

0.556 x 77 x 1002.00EZAELN3002B153E84AV☐☐☐3714☐☐0

3AC320 ...550

0.37

1.360 x 95 x 1144.00EZAELN3004B742

E84AV☐☐☐5514☐☐00.55

E84AV☐☐☐7514☐☐0 1)0.75

E84AV☐☐☐1124☐☐01.10

1.569 x 95 x 1176.00EZAELN3006B492E84AV☐☐☐1524☐☐01.50

E84AV☐☐☐2224☐☐0 1)2.20

1.985 x 120 x 1378.00EZAELN3008B372E84AV☐☐☐3024☐☐03.00

2.085 x 120 x 13410.0EZAELN3010B292E84AV☐☐☐4024☐☐04.00

2.795 x 120 x 13416.0EZAELN3016B182E84AV☐☐☐5524☐☐0 1)5.50

3.895 x 155 x 16220.0EZAELN3020B152E84AV☐☐☐7524☐☐07.50

5.8110 x 155 x 167

25.0EZAELN3025B122E84AV☐☐☐1134☐☐0 1)11.0

6.035.0EZAELN3035B841E84AV☐☐☐1534☐☐015.0

8.3112 x 185 x 19645.0EZAELN3045B651E84AV☐☐☐1834☐☐0 1)18.5

8.4112 x 185 x 20850.0EZAELN3050B591E84AV☐☐☐2234☐☐0 1)22.0

9.7122 x 185 x 20763.0EZAELN3063B471E84AV☐☐☐3034☐☐0 1)30.0

12.5125 x 210 x 23980.0EZAELN3080B371E84AV☐☐☐3734☐☐0 1)37.0

16.0115 x 267 x 20190.0EZAELN3090B331E84AV☐☐☐4534☐☐0 1)45.0



Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

0.556 x 77 x 1002.00EZAELN3002B153E84AV☐☐☐3714☐☐0

3AC320 ...550

0.55

1.360 x 95 x 1144.00EZAELN3004B742

E84AV☐☐☐5514☐☐00.75

E84AV☐☐☐7514☐☐01.10

E84AV☐☐☐1124☐☐01.50

1.569 x 95 x 1176.00EZAELN3006B492E84AV☐☐☐1524☐☐02.20

1.985 x 120 x 1378.00EZAELN3008B372E84AV☐☐☐2224☐☐03.00

2.085 x 120 x 13410.0EZAELN3010B292E84AV☐☐☐3024☐☐04.00

2.795 x 120 x 13416.0EZAELN3016B182E84AV☐☐☐4024☐☐05.50

3.895 x 155 x 16220.0EZAELN3020B152E84AV☐☐☐5524☐☐07.50

5.8110 x 155 x 167

25.0EZAELN3025B122E84AV☐☐☐7524☐☐011.0

5.930.0EZAELN3030B982E84AV☐☐☐1134☐☐015.0

8.3112 x 185 x 19645.0EZAELN3045B651E84AV☐☐☐1834☐☐022.0

9.7122 x 185 x 20763.0EZAELN3063B471E84AV☐☐☐2234☐☐0 1)30.0

12.5125 x 210 x 23980.0EZAELN3080B371E84AV☐☐☐3034☐☐0 1)37.0

16.0115 x 267 x 20190.0EZAELN3090B331E84AV☐☐☐3734☐☐0 1)45.0

19.0139 x 267 x 201100EZAELN3100B301E84AV☐☐☐4534☐☐0 1)55.0


8.1 - 13Lenze | V01-en_GB-08/2014

Mains chokeInverter Drives 8400 StateLine

8.1


Inverter Drives 8400 BaseLine



Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

1.8E84AV☐☐☐7512☐☐01AC180 ...264

0.75

1.2129 x 61 x 1053.00ELN3-1500H003-001

E84AV☐☐☐3714☐☐0

3AC320 ...550

0.37

E84AV☐☐☐5514☐☐00.55

E84AV☐☐☐7514☐☐00.75

2.0148 x 61 x 1226.00ELN3-0680H006-001

E84AV☐☐☐1124☐☐01.10

E84AV☐☐☐1524☐☐01.50

E84AV☐☐☐2224☐☐02.20

2.6148 x 63 x 1227.00ELN3-0500H007-001E84AV☐☐☐3024☐☐03.00

Lenze | V01-en_GB-08/20148.1 - 14


8.1


Inverter Drives 8400 BaseLine



Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

0.556 x 77 x 1002.00EZAELN3002B153E84AV☐☐☐3714☐☐0

3AC320 ...550

0.37

1.360 x 95 x 1144.00EZAELN3004B742

E84AV☐☐☐5514☐☐00.55

E84AV☐☐☐7514☐☐00.75

E84AV☐☐☐1124☐☐01.10

1.569 x 95 x 1176.00EZAELN3006B492E84AV☐☐☐1524☐☐01.50

E84AV☐☐☐2224☐☐02.20

1.985 x 120 x 1378.00EZAELN3008B372E84AV☐☐☐3024☐☐03.00

8.1 - 15Lenze | V01-en_GB-08/2014


8.1


9300 servo inverters



Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

0.880 x 68 x 922.00EZN3A2400H002EVS9321-☐☐

3AC320 ...528

0.37

1.2129 x 61 x 1053.00ELN3-1500H003-001EVS9322-☐☐0.75

1.5129 x 70 x 1054.00ELN3-0900H004-001EVS9323-☐☐1.50

2.6148 x 63 x 1227.00ELN3-0500H007-001EVS9324-☐☐3.00

5.3178 x 89.5 x 14213.0ELN3-0250H013-001EVS9325-☐☐5.50

8.2219 x 110.5 x 17024.0ELN3-0150H024-001EVS9326-☐☐11.0

10.2219 x 135 x 225

35.0ELN3-0088H035-001EVS9327-☐☐15.0

10.445.0ELN3-0075H045-001EVS9328-☐☐22.0

13.2267 x 130 x 27055.0ELN3-0055H055-001EVS9329-☐☐30.0

20.6267 x 175 x 27085.0ELN3-0038H085-001EVS9330-☐☐45.0

20.0267 x 150 x 202105ELN3-0027H105-001EVS9331-☐☐55.0

21.2265 x 140 x 268130ELN3-0022H130EVS9332-☐☐75.0

Lenze | V01-en_GB-08/20148.1 - 16


8.1


9300 servo inverters



Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

0.556 x 77 x 1001.50EZAELN3002B203EVS9321-☐☐

3AC320 ...528

0.37

1.360 x 95 x 1144.00EZAELN3004B742EVS9322-☐☐0.75

EVS9323-☐☐1.50

1.985 x 120 x 1378.00EZAELN3008B372EVS9324-☐☐3.00

2.795 x 120 x 13416.0EZAELN3016B182EVS9325-☐☐5.50

5.8110 x 155 x 167

25.0EZAELN3025B122EVS9326-☐☐11.0

5.930.0EZAELN3030B982EVS9327-☐☐15.0

8.3112 x 185 x 19645.0EZAELN3045B651EVS9328-☐☐22.0

9.7122 x 185 x 20763.0EZAELN3063B471EVS9329-☐☐30.0

12.5125 x 210 x 23980.0EZAELN3080B371EVS9330-☐☐45.0

19.0139 x 267 x 201100EZAELN3100B301EVS9331-☐☐55.0

26.0291 x 149 x 210160EZAELN3160B191EVS9332-☐☐75.0

8.1 - 17Lenze | V01-en_GB-08/2014


8.1


ECS servo system



Ratedoutput cur-rent

Mains chokePower supply module

mh x b x tINUACIN, out[kg][mm][A][V][A]

8.2219 x 110.5 x 17024.0ELN3-0150H024-001ECS☐☐0123AC320 ...

528

12.0

10.2219 x 135 x 22535.0ELN3-0088H035-001ECS☐☐02020.0

13.2267 x 130 x 27055.0ELN3-0055H055-001ECS☐☐04040.0

Lenze | V01-en_GB-08/20148.1 - 18


8.1


ECS servo system



Ratedoutput cur-rent

Mains chokePower supply module

mh x b x tINUACIN, out[kg][mm][A][V][A]

3.895 x 155 x 16220.0EZAELN3020B152ECS☐☐0123AC320 ...

528

12.0

6.0110 x 155 x 16735.0EZAELN3035B841ECS☐☐02020.0

8.4112 x 185 x 20850.0EZAELN3050B591ECS☐☐04040.0

8.1 - 19Lenze | V01-en_GB-08/2014


8.1


9300 vector servo inverters



Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

0.880 x 68 x 922.00EZN3A2400H002EVF9321-☐V

3AC320 ...528

0.37

1.2129 x 61 x 1053.00ELN3-1500H003-001EVF9322-☐V0.75

1.5129 x 70 x 1054.00ELN3-0900H004-001EVF9323-☐V1.50

2.6148 x 63 x 1227.00ELN3-0500H007-001EVF9324-☐V3.00

5.3178 x 89.5 x 14213.0ELN3-0250H013-001EVF9325-☐V5.50

8.2219 x 110.5 x 17024.0ELN3-0150H024-001EVF9326-☐V11.0

10.4219 x 135 x 22545.0ELN3-0075H045-001EVF9328-☐V22.0

13.2267 x 130 x 27055.0ELN3-0055H055-001EVF9329-☐V30.0

20.6267 x 175 x 27085.0ELN3-0038H085-001EVF9330-☐V45.0

20.0267 x 150 x 202105ELN3-0027H105-001EVF9331-☐V55.0

21.2265 x 140 x 268130ELN3-0022H130EVF9332-☐V75.0

30.2265 x 170 x 268170ELN3-0017H170EVF9333-☐V90.0



Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

0.880 x 68 x 922.00EZN3A2400H002EVF9321-☐V

3AC320…400

0.55

1.2129 x 61 x 1053.00ELN3-1500H003-001EVF9322-☐V1.10

2.0NaNxNaNxNaN

5.00EVF9323-☐V2.20

3.69.00EVF9324-☐V4.00

5.3178 x 89.5 x 14213.0ELN3-0250H013-001EVF9325-☐V7.50

10.4219 x 135 x 22545.0ELN3-0075H045-001EVF9327-☐V22.0

20.6267 x 175 x 27085.0ELN3-0038H085-001EVF9329-☐V37.0

20.0267 x 150 x 202105ELN3-0027H105-001EVF9330-☐V55.0

EVF9331-☐V75.0

30.2265 x 170 x 268170ELN3-0017H170EVF9332-☐V90.0

32.0330 x 170 x 302200ELN3-0014H200EVF9333-☐V110

Lenze | V01-en_GB-08/20148.1 - 20


8.1


9300 vector servo inverters



Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

0.556 x 77 x 1001.50EZAELN3002B203EVF9321-☐V

3AC320 ...528

0.37

1.360 x 95 x 1144.00EZAELN3004B742EVF9322-☐V0.75

EVF9323-☐V1.50

1.985 x 120 x 1378.00EZAELN3008B372EVF9324-☐V3.00

2.795 x 120 x 13416.0EZAELN3016B182EVF9325-☐V5.50

5.8110 x 155 x 16725.0EZAELN3025B122EVF9326-☐V11.0

8.3112 x 185 x 19645.0EZAELN3045B651EVF9328-☐V22.0

9.7122 x 185 x 20763.0EZAELN3063B471EVF9329-☐V30.0

12.5125 x 210 x 23980.0EZAELN3080B371EVF9330-☐V45.0

19.0139 x 267 x 201100EZAELN3100B301EVF9331-☐V55.0

26.0291 x 149 x 210160EZAELN3160B191EVF9332-☐V75.0

28.0316 x 164 x 230180EZAELN3180B171EVF9333-☐V90.0



Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

0.556 x 77 x 1002.00EZAELN3002B153EVF9321-☐V

3AC320…400

0.55

1.360 x 95 x 1144.00EZAELN3004B742EVF9322-☐V1.10

1.569 x 95 x 1176.00EZAELN3006B492EVF9323-☐V2.20

2.085 x 120 x 13410.0EZAELN3010B292EVF9324-☐V4.00

2.795 x 120 x 13416.0EZAELN3016B182EVF9325-☐V7.50

8.3112 x 185 x 19645.0EZAELN3045B651EVF9327-☐V22.0

9.7122 x 185 x 20763.0EZAELN3063B471EVF9329-☐V37.0

19.0139 x 267 x 201100EZAELN3100B301EVF9330-☐V55.0

22.0291 x 139 x 208125EZAELN3125B241EVF9331-☐V75.0

26.0291 x 149 x 210160EZAELN3160B191EVF9332-☐V90.0

32.0352 x 144 x 264200EZAELN3200B151EVF9333-☐V110

8.1 - 21Lenze | V01-en_GB-08/2014


8.1


8200 vector inverters

Assignment of the previous mains chokesOperation with rated power, 230 V


Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

1.8120 x 70 x 1204.50E82ZL75132BE82☐V551K2C

3AC100…264

0.55

E82☐V751K2C0.75

1.098 x 61 x 1059.50E82ZL22232BE82☐V152K2C1.50

E82☐V222K2C2.20

2.7120 x 80 x 14017.0ELN3-0120H017E82☐V302K2C3.00

E82☐V402K2C4.00

6.0150 x 100 x 18525.0ELN3-0120H025E82☐V552K2C5.50

10.2219 x 135 x 22535.0ELN3-0088H035-001E82☐V752K2C7.50

Operation with increased power output, 230 V


Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

1.8120 x 70 x 1204.50E82ZL75132BE82☐V551K2C

3AC100…264

0.75

E82☐V751K2C1.10

1.098 x 61 x 1059.50E82ZL22232BE82☐V152K2C2.20

2.7120 x 80 x 14017.0ELN3-0120H017E82☐V302K2C4.00

10.2219 x 135 x 22535.0ELN3-0088H035-001E82☐V552K2C7.50

Lenze | V01-en_GB-08/20148.1 - 22


8.1



Assignment of the newmains chokesOperation with rated power, 230 V


Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

1.360 x 95 x 1144.00EZAELN3004B742E82☐V551K2C

3AC100…264

0.55

E82☐V751K2C0.75

1.985 x 120 x 1378.00EZAELN3008B372E82☐V152K2C1.50

2.085 x 120 x 13410.0EZAELN3010B292E82☐V222K2C2.20

2.795 x 120 x 13416.0EZAELN3016B182E82☐V302K2C3.00

E82☐V402K2C4.00

5.8110 x 155 x 167

25.0EZAELN3025B122E82☐V552K2C5.50

5.930.0EZAELN3030B982E82☐V752K2C7.50



Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

1.360 x 95 x 1144.00EZAELN3004B742E82☐V551K2C

3AC100…264

0.75

1.569 x 95 x 1176.00EZAELN3006B492E82☐V751K2C1.10

1.985 x 120 x 1378.00EZAELN3008B372E82☐V152K2C2.20

2.795 x 120 x 13416.0EZAELN3016B182E82☐V302K2C4.00

5.9110 x 155 x 16730.0EZAELN3030B982E82☐V552K2C7.50

8.1 - 23Lenze | V01-en_GB-08/2014


8.1



Assignment of the previous mains chokesOperation with rated power, 400 V


Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

1.2129 x 61 x 1053.00ELN3-1500H003-001E82☐V551K4C

3AC320 ...528

0.55

E82☐V751K4C0.75

2.0148 x 61 x 1226.00ELN3-0680H006-001E82☐V152K4C1.50

E82☐V222K4C2.20

2.6148 x 63 x 1227.00ELN3-0500H007-001E82☐V302K4C3.00

5.3178 x 89.5 x 14213.0ELN3-0250H013-001E82☐V402K4C4.00

E82☐V552K4C5.50

3.9178 x 74.5 x 14017.0ELN3-0170H017-001E82☐V752K4C7.50

8.2219 x 110.5 x 17024.0ELN3-0150H024-001E82☐V113K4C11.0

10.2219 x 135 x 225

35.0ELN3-0088H035-001E82☐V153K4B15.0

10.445.0ELN3-0075H045-001E82☐V223K4B22.0

13.2267 x 130 x 27055.0ELN3-0055H055-001E82☐V303K4B30.0

20.6267 x 175 x 27085.0ELN3-0038H085-001E82☐V453K4B45.0

20.0267 x 150 x 202105ELN3-0027H105-001E82☐V553K4B55.0

21.2265 x 140 x 268130ELN3-0022H130E82☐V753K4B75.0

30.2265 x 170 x 268170ELN3-0017H170E82☐V903K4B90.0



Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

1.2129 x 61 x 1053.00ELN3-1500H003-001E82☐V551K4C

3AC320…400

0.75

E82☐V751K4C1.10

2.0148 x 61 x 1226.00ELN3-0680H006-001E82☐V222K4C3.00

2.6148 x 63 x 1227.00ELN3-0500H007-001E82☐V302K4C4.00

5.3178 x 89.5 x 14213.0ELN3-0250H013-001E82☐V402K4C5.50

8.2219 x 110.5 x 17024.0ELN3-0150H024-001E82☐V752K4C11.0

10.4219 x 135 x 22545.0ELN3-0075H045-001E82☐V153K4B22.0

13.2267 x 130 x 27055.0ELN3-0055H055-001E82☐V223K4B30.0

20.6267 x 175 x 27085.0ELN3-0038H085-001E82☐V303K4B37.0

20.0267 x 150 x 202105ELN3-0027H105-001E82☐V453K4B55.0

21.2265 x 140 x 268130ELN3-0022H130E82☐V553K4B75.0

30.2265 x 170 x 268170ELN3-0017H170E82☐V753K4B90.0

32.0330 x 170 x 302200ELN3-0014H200E82☐V903K4B110

Lenze | V01-en_GB-08/20148.1 - 24


8.1



Assignment of the newmains chokesOperation with rated power, 400 V


Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

0.556 x 77 x 1002.00EZAELN3002B153E82☐V551K4C

3AC320 ...528

0.55

1.360 x 95 x 1144.00EZAELN3004B742E82☐V751K4C0.75

E82☐V152K4C1.50

1.569 x 95 x 1176.00EZAELN3006B492E82☐V222K4C2.20

1.985 x 120 x 1378.00EZAELN3008B372E82☐V302K4C3.00

2.085 x 120 x 13410.0EZAELN3010B292E82☐V402K4C4.00

2.795 x 120 x 13416.0EZAELN3016B182E82☐V552K4C5.50

E82☐V752K4C7.50

5.8110 x 155 x 167

25.0EZAELN3025B122E82☐V113K4C11.0

5.930.0EZAELN3030B982E82☐V153K4B15.0

8.3112 x 185 x 19645.0EZAELN3045B651E82☐V223K4B22.0

9.7122 x 185 x 20763.0EZAELN3063B471E82☐V303K4B30.0

12.5125 x 210 x 23980.0EZAELN3080B371E82☐V453K4B45.0

19.0139 x 267 x 201100EZAELN3100B301E82☐V553K4B55.0

26.0291 x 149 x 210160EZAELN3160B191E82☐V753K4B75.0

28.0316 x 164 x 230180EZAELN3180B171E82☐V903K4B90.0



Typical motorpower


mh x b x tINUACP

[kg][mm][A][V][kW]

1.360 x 95 x 1144.00EZAELN3004B742E82☐V551K4C

3AC320…400

0.75

E82☐V751K4C1.10

1.985 x 120 x 1378.00EZAELN3008B372E82☐V222K4C3.00

2.085 x 120 x 13410.0EZAELN3010B292E82☐V302K4C4.00

2.795 x 120 x 13416.0EZAELN3016B182E82☐V402K4C5.50

3.895 x 155 x 16220.0EZAELN3020B152E82☐V752K4C11.0

6.8185 x 112 x 19640.0EZAELN3040B741E82☐V153K4B22.0

8.4112 x 185 x 20850.0EZAELN3050B591E82☐V223K4B30.0

9.7122 x 185 x 20763.0EZAELN3063B471E82☐V303K4B37.0

19.0139 x 267 x 201100EZAELN3100B301E82☐V453K4B55.0

22.0291 x 139 x 208125EZAELN3125B241E82☐V553K4B75.0

26.0291 x 149 x 210160EZAELN3160B191E82☐V753K4B90.0

28.0316 x 164 x 230180EZAELN3180B171E82☐V903K4B110

8.1 - 25Lenze | V01-en_GB-08/2014


8.1


Newmains choke

DimensionsProduct key

Mains choke

j_2j_1i2i1g2dthb

[mm][mm][mm][mm][mm][mm][mm][mm][mm]

505030304.8042.51005677EZAELN3002B203

8.1 - 27Lenze | V01-en_GB-08/2014

Mains chokeDimensions

8.1


Previous mains choke


Mains choke

vun2n1m2m1thb


8.004.8035.041.056.011210561129ELN3-1500H003-001

Newmains choke


Mains choke

j_2j_1i2i1g2dthb


505030304.8042.51005677EZAELN3002B153

Lenze | V01-en_GB-08/20148.1 - 28


8.1




Mains choke

vun2n1m2m1thb


8.004.8044.050.056.011210570129ELN3-0900H004-001

Newmains choke


Mains choke

j_2j_1i2i1g2dthb


505030304.8049.31146095EZAELN3004B742

8.1 - 29Lenze | V01-en_GB-08/2014


8.1




Mains choke

vun2n1m2m1thb


8.004.8039.045.084.013612261148ELN3-0680H006-001

Newmains choke


Mains choke

j_2j_1i2i1g2dthb


505030304.8058.51176995EZAELN3006B492

Lenze | V01-en_GB-08/20148.1 - 30


8.1




Mains choke

vun2n1m2m1thb


8.004.8049.090.013612263148ELN3-0500H007-001

Newmains choke


Mains choke

j_2j_1i2i1g3g2dcthb

[mm][mm][mm][mm][mm][mm][mm][mm][mm][mm][mm]

505030309.004.8070.010513785120EZAELN3008B372

8.1 - 31Lenze | V01-en_GB-08/2014


8.1




Mains choke

vun2n1m2m1thb


8.004.8064.569.511316614290178ELN3-0250H013-001

Newmains choke


Mains choke

j_2j_1i2i1g3g2dcthb


505030309.004.8070.010513485120EZAELN3010B292

Lenze | V01-en_GB-08/20148.1 - 32


8.1




Mains choke

vun2n1m2m1thb


8.004.8064.569.511316614290178ELN3-0250H013-001

Newmains choke


Mains choke

j_2j_1i2i1g3g2dcthb


505030309.004.8080.010513495120EZAELN3016B182

8.1 - 33Lenze | V01-en_GB-08/2014


8.1




Mains choke

vun2n1m2m1thb


8.004.8054.511316614075178ELN3-0170H017-001

Newmains choke


Mains choke

j_2j_1i2i1g3g2dcthb


5050303011.05.8080.013516295155EZAELN3020B152

Lenze | V01-en_GB-08/20148.1 - 34


8.1




Mains choke

vun2n1m2m1thb


12.07.0066.580.5136201170111219ELN3-0150H024-001

Newmains choke


Mains choke

j_2j_1i2i1g3g2dcthb


5050303011.05.8095.0135167110155EZAELN3025B122

8.1 - 35Lenze | V01-en_GB-08/2014


8.1




Mains choke

n2n1m2m1e1thb

[mm][mm][mm][mm][mm][mm][mm][mm]

74.090.5161201121225135219ELN3-0088H035-001

Newmains choke


Mains choke

j_2j_1i2i1g3g2dcthb


5050303011.05.8095.0135167110155EZAELN3030B982

Lenze | V01-en_GB-08/20148.1 - 36


8.1




Mains choke

n2n1m2m1e1thb


74.090.5161201121225135219ELN3-0088H035-001

Newmains choke


Mains choke

j_2j_1i2i1g3g2dcthb


5050303011.05.8095.0135167110155EZAELN3035B841

8.1 - 37Lenze | V01-en_GB-08/2014


8.1




Mains choke

n2n1m2m1e1thb


74.090.5161201121225135219ELN3-0075H045-001

Newmains choke


Mains choke

j_2j_1i2i1g3g2dcthb


5050303012.08.0057.0170196112185EZAELN3040B741

Lenze | V01-en_GB-08/20148.1 - 38


8.1




Mains choke

n2n1m2m1e1thb


74.090.5161201121225135219ELN3-0075H045-001

Newmains choke


Mains choke

j_2j_1i2i1g3g2dcthb


5050303012.08.0067.0170196112185EZAELN3045B651

8.1 - 39Lenze | V01-en_GB-08/2014


8.1


Newmains choke


Mains choke

j_2j_1i2i1g3g2dcthb


7575303012.08.0093.090208112185EZAELN3050B591

Lenze | V01-en_GB-08/20148.1 - 40


8.1




Mains choke

n2n1m2m1e1thb


70.079.0206249109270130267ELN3-0055H055-001

Newmains choke


Mains choke

j_2j_1i2i1g3g2dcthb


7575303012.08.0010390207122185EZAELN3063B471

8.1 - 41Lenze | V01-en_GB-08/2014


8.1




Mains choke

n2n1m2m1e1thb


94.0103206249133270175267ELN3-0038H085-001

Newmains choke


Mains choke

j_2j_1i2i1g3g2dcthb


7575303012.08.00106105239125210EZAELN3080B371

Lenze | V01-en_GB-08/20148.1 - 42


8.1




Mains choke

n2n1m2m1e1thb


94.0103206249133270175267ELN3-0038H085-001

Newmains choke


Mains choke

j_2j_1i2i1g3g2dcthb


100100303013.07.0078.5249201115267EZAELN3090B331

8.1 - 43Lenze | V01-en_GB-08/2014


8.1




Mains choke

n2n1m2m1e1thb


94.0103206249133202150267ELN3-0027H105-001

Newmains choke


Mains choke

j_2j_1i2i1g3g2dcthb


100100303013.07.00103249201139267EZAELN3100B301

Lenze | V01-en_GB-08/20148.1 - 44


8.1




Mains choke

wvunme1b1thb

[mm][mm][mm][mm][mm][mm][mm][mm][mm][mm]

9.0016.08.3081.0240102237268140265ELN3-0022H130

Newmains choke


Mains choke

j_2j_1i2i1g3g2dcthb


100100303018.010.0107273208139291EZAELN3125B241

8.1 - 45Lenze | V01-en_GB-08/2014


8.1




Mains choke

wvunme1b1thb


9.0016.08.3081.0240102237268140265ELN3-0022H130

Newmains choke


Mains choke

j_2j_1i2i1g3g2dcthb


100100303018.010.0117273210149291EZAELN3160B191

Lenze | V01-en_GB-08/20148.1 - 46


8.1




Mains choke

wvunme1b1thb


10.516.08.30107240128237268170265ELN3-0017H170

Newmains choke


Mains choke

j_2j_1i2i1g3g2dcthb


100100303018.010.0124292230164316EZAELN3180B171

8.1 - 47Lenze | V01-en_GB-08/2014


8.1




Mains choke

wvunme1b1thb


10.516.08.3089.0274114274302170330ELN3-0014H200

Newmains choke


Mains choke

j_2j_1i2i1g3g2dcthb


100100303018.010.0104328264144352EZAELN3200B151

Lenze | V01-en_GB-08/20148.1 - 48


8.1
