Download pdf - Mechanical live projects list 2015 new @ mech wind ameerpet hyderabad

Mech Wind Technologies

8-2-293/82 BBN/C/199, Babu Naidu Nagar, Film Nagar, Jubilee Hills,

Hyderabad- 500096 Ph 9542878334.

MECHANICAL LIVE PROJECTS LIST OF

2015

PH NO.9542878334

We provide you prototypes and small series designed with steel

,plywood and aluminum ,plastic or metal according to the design,

we manufacture .we have involved in training students and

helping them in selection of project topic ,completion of projects

with student’s involvement which have received appreciation and recognition and prize winning in exhibitions. Every year we come

out with innovative project topics and concepts and also give scope

and encouragement to the students to come out with their own new

ideas and we make them to realize them in practical with available

resources within the reach. Students to get involved in projects up

to completion.

We believe students should be able to show at the end of the

projects --- a working project model that is practically constructed

by them. Implementation of this practical work would sharpen

their engineering skills the ability to think logically and critically to

solve a real time practical problem in industry or society.



Hyderabad- 500096 Ph 9542878334.

Branches :

Students of the following Branches can

Approach

MECHANICAL AUTOMATION PROJECTS.

AGRICULTURE PROJECTS.

CONVENTIONAL & NONCONVENTIONAL.

INDUSTRIAL PRODUCTION MANUFACTURING.

MECHATRONICS PROJECTS.

AUTOMOBILE PROJECT.

INNOVATIVE MECHANICAL PROJECTS.

THERMAL BASED PROJECTS.

ROBOTIC PROJECTS.

COMPLETE MECHANICAL PROJECTS

(WITH OUT ELECTRONICS)



Hyderabad- 500096 Ph 9542878334.

MECHANICAL AUTOMATION PROJECTS

&

MECHATRONICS PROJECTS

S.NO NAME OF THE

PROJECT

PROJECTS DESCRIPTION R

S

TRG0

M001

WIND AND WATER

PUMIINGDEVELOPMEN

T AND DISSEMINATION

:

ABSTRACT NO : M001

VIDEO NO : M001

The main objective of wind water pump

development and dissemination project is to improve

and refine two models of wind pump and copy 6

wind pumps from the prototype models for

dissemination to farmers in country wide through

training course, installation a long major national

roads and workshop. The project contributed to

rural agricultural development.

TRG0

M002

GENERAL WORKING

OF LATHE MACHINE:

ABSTRACT NO : M002

VIDEO NO : M002

The lathe machine is working by the following

important parts electric motor, cone pulley, tumbler

gear, back gear system, gear box, head stock, tail

stock, carriage, live centre, dead centre, belt, lead

screw, feed rod, tool post, spanner, face plate, catch

plate, apron, bed, half nut, step cone pulley system,

and centre rest.

TRG0

M003

SAFETY ELEVATOR

ABSTRACT NO : M003

VIDEO NO : M003

Elevators incorporate several safety features to

prevent the car from crashing into the bottom of the

shaft. Safeties installed on the car can prevent this

type of accident from occurring when the machine

brake fails or the wire ropes suspending the car

break. However, the inherent design of the safeties

render them inoperative in the ascending direction



Hyderabad- 500096 Ph 9542878334.

TRG0

M004

REGENERATIVE

BRAKING SYSTEM:

ABSTRACT NO : M004

VIDEO NO : M004

A regenerative brake is an energy recovery

mechanism which slows a vehicle or object down by

converting its kinetic energy into another form,

which can be either used immediately or stored until

needed. This contrasts with conventional braking

systems, where the excess kinetic energy is converted

to heat by friction in the brake linings and therefore

wasted.

TRG0

M005

WIND POWER

GENERATION SYSTEM

ABSTRACT NO : M005

VIDEO NO : M005

Families living in rural areas who do not have access

to the national grid may have to travel long distances

and wait long times for their batteries to be

recharged at commercial centres.practical action has

developed reliable and cost effective wind energy

systems for charging batteries to help meet the

electrical energy needs of these people. Small scale

wind energy generators also have the potential to

stimulate village-level charging enterprises for either

community or private use. Therefore practical action

aims to develop and promote local industries capable

of manufacturing and maintaining the generators.

TRG0

M006

ELECTRICAL ENERGY

FROM SPEED

BREAKER:

ABSTRACT NO : M006

VIDEO NO : M006

This can be designed to generate electrical energy

when vehicles cross the breaker and roll the roller

based speed breakers connected with an alternator.

TRG0

M007

DESIGN AND

FABRICATION OF

LOADING AND

UNLOADING

CRANE FOR SHIP

ABSTRACT NO : M007

VIDEO NO : M007

Here we have fabricated the booms. This equipment

has been mainly developed for ships. This equipment

is very useful for ships for loading and unloading the

materials. Here we are using motor to rotate the

whole arrangement to front and rear end of the ship.

TRG0

M008

REMOTE CONTROLLED

MOTORIZED JIB

CRANE

ABSTRACT NO : M008

This system is mainly used for industrial field.lot of

man power is required to transport the goods and

weights from one place to the other place in

industries. But if they use this crane system, only few

http://en.wikipedia.org/wiki/Energy_recovery

http://en.wikipedia.org/wiki/Kinetic_energy

http://en.wikipedia.org/wiki/Brake_linings



Hyderabad- 500096 Ph 9542878334.

VIDEO NO : M008

persons are enough to do that work. What the

benefit appear here means, manpower is totally

reduced. It not only helps in this field, but also can

use in industrial purpose for robotic based jobs.

TRG0

M009

FABRICATION OF

AUTOMATIC SPRAY

PAINTING MACHINE

ABSTRACT NO : M009

VIDEO NO : M009

In this project we have designed and fabricated

automatic paint sprayer with shape sorter. This

system uses compressed air to spray the paint. Spray

painting is a painting technique where a device

sprays a coating (paint, ink, varnish etc.) through the

air onto a surface. The most common types employ

compressed gas usually air is compressed by an air

compressor to atomize and direct the paint particles.

Shape sorter is nothing but the identified different

material is passed through the conveyor for packing

process or counting the finished material. In many

industries they are producing different types of work

pieces, in this finally they are using man power for

collecting one shape of work pieces from the lot. It

takes more time and also man power for separating

the work pieces is also involved. To avoid this we are

using the DC gun with help of electrical arrangement

to separate the different shape of work pieces after

the painting is completed.

TRG0

M010

FABRICATION OF

AUTOMATIC FLUID

FILLING MACHINE

ABSTRACT NO : M010

VIDEO NO : M010

The project deals primarily with lower capacity

bottle filling machines used by small to medium scale

companies and excludes high speed rotary bottle

filling machines typically found only in the mass

market beverage and pharmaceutical industry. In

contrast, the bottle filling machines discussed here

are used throughout all industries including food,

beverage, chemical, cosmetic and pharmaceutical

but at lower speeds. In fact, most of the market for

bottle filling machines in terms of units sold is for

semi automatic equipment that operates at normal

speed. Our model consists of a solenoid valve, non

return valve, pneumatic cylinder, a motor, proximity

sensor and a Geneva conveyor.

TRG0

M011

FABRICATION OF

MULTIPURPOSE

VACUUM CLEANER

Here we fabricate a multipurpose vacuum cleaning

machine. It’s a new innovative concept. This equipment has been mainly developed for cleaning



Hyderabad- 500096 Ph 9542878334.

ABSTRACT NO : M011

VIDEO NO : M011

the floors in various areas such as hotels,

restaurants, departmental stores, companies and

also for home applications. The project consists of

following parts vacuum arrangement, wheels, handle

and control unit.

TRG0

M012

AUTOMATIC BOTTLE

FILLING AND CAP

CLOSING MACHINE

ABSTRACT NO : M012

VIDEO NO : M012

Here we are fabricating automatic bottle filling and

cap closing machine which can be used in industries.

In this, we are using a pneumatic cylinder which can

be operated by a solenoid valve. This project reduces

the human effort in factories and this gives higher

accuracy as compared to that of the manual work.

The components used in this project are Motor,

geneva mechanism, Pneumatic cylinder, Solenoid

valve, proximity Sensor and Control unit.

TRG0

M013

MULTILEVEL CAR

PARKING

ABSTRACT NO : M013

VIDEO NO : M013

In this project we have fabricated the multi level car

parking system. This is a new innovative concept. In

this project we are using rope, pulley, motor,

proximity sensors, rack and pinion arrangement,

frames and control unit. Using this equipment we

can easily lift the cars to the required area. This

equipment is very useful for parking the car in

shopping complex, industries and departmental

stores, etc.

TRG0

M014

SOLAR PANEL

TRACKING SYSTEM

ABSTRACT NO : M014

VIDEO NO : M014

The objective of this project is to control solar panels

position depending upon the sun light. Nowadays

power demand has increased due to this power

failure happens many time. This project is designed

to provide the solution for this power loss. This

project is designed with LDR, signal conditioning

unit, limit switches, microcontroller, and driver

circuit along with motor. Solar panel consists of

number of silicon cells, when sun light falls on this

panel it generates the voltage signals then these

voltage signals are given to changing circuit.

Depending on the panel board size the generated

voltage amount is increased. Naturally suns direction

varies per hour. In order to get the efficient voltage

amount the solar panel position has to vary as per

the suns direction.



Hyderabad- 500096 Ph 9542878334.

TRG0

M015

ADVANCED HAND

OPERATED FLOOR

MOPPING VEHICLE

ABSTRACT NO : M015

VIDEO NO : M015

This project is specially designed to clean the floors

with a mechanical equipped device. Nowadays it is a

time consuming process to clean the floors in

shopping malls, apartments, theatres and offices and

also it is a must to keep the environment clean. So we

are doing a project to meet this problem with a

mechanically equipped device. This is a manually

operated device, which contains chain drive, cam

arrangement, mopping arrangement and bevel gear

arrangement for cleaning the floor.

TRG0

M016

DESIGN AND

FABRICATION SERVO

HAND

ABSTRACT NO : M016

VIDEO NO : M016

The main objective of this project is to design a hand

which is operated with help of servo motors. This

project helps in gripping of materials in various

applications. Here there are finger like grippers

which acts same as that of human fingers for various

gripping purposes. The main parts in this project

used are servo motor, ropes, fingers, control unit,

and rope guide pipes

TRG0

M017

AUTOMATIC CHEESE

CUTTER

ABSTRACT NO : M017

VIDEO NO : M017

In canteens and all restaurants, it will be very

difficult for the cooks to cut the cheese by knife and

it is time consuming. In order to avoid this, here we

are providing a cheese cutter which cuts the cheese

within a quick time. So in order to improve the

automation in catering industries, we are

manufacturing a prototype model which can be

utilized by all restaurants, hotels and as well as in all

cheese and milk factories to cut the cheese. The

model consists of two motors and two proximity

sensors

TRG0

M018

AUTOMATIC PLANT

WATER MOISTURING

SYSTEM FOR

GARDEN

ABSTRACT NO : M018

VIDEO NO : M018

The objective of this project is to control the

humidity level of the land. This project is mostly

used for agriculture purpose. According to the

cultivation there is need to maintain humidity in the

land at a particular level. This project is used to

control the humidity in the land.

TRG0

M019

AUTOMATIC PAINT

SPRAYING WITH PICK

The objective of this project is to design robot for

automatic painting purpose. This project is very

useful for painters because in less time they can



Hyderabad- 500096 Ph 9542878334.

AND PLACE

EQUIPMENT

ABSTRACT NO : M019

VIDEO NO : M019

finish large number of works in less man power. This

project is designed by following blocks

Microcontroller, servo motor, and driver circuit with

relay, Solenoid valve, DC/AC Motor and sprayer.

TRG0

M021

PNEUMATIC BRICK

MAKING MACHINE-

MODEL

ABSTRACT NO : M020

VIDEO NO : M020

In our project we are fabricating the pneumatic

brick making machine, it is operated by pneumatic

cylinder. In olden days or even now, most of the

brick making industries use human power to make

bricks. If it is very few number of bricks it is easy

and advisable to use human power but when it is

huge in numbers only machines can perform faster,

and easily than human. Continuous working of

workers leads to fatigue. By considering the above

difficulty we have introduced a new concept called

pneumatic brick making machine. This project is

designed by following blocks, Control unit,

Pneumatic cylinder, Motor, screw conveyor, Brick

die.

TRG0

M022

AUTOMATIC MEDICAL

SHOP TABLET AND

SYRUP VENDOR

ABSTRACT NO : M021

VIDEO NO : M021

The objective of this concept is to design the

automatic medical shop- tablet and syrup vendor

system with help of control unit. Here the medicine is

highlighted by certain alphabets. The tablets are

separated and arranged in different trays. The

required tablet and syrup is deduced from the lot by

pressing the buttons. So the specified button codes

are already feed in the control unit. This system is

mainly used to save the time also avoiding the

mistakes done by the human. Project consists of DC

gun, Tablet collecting tray, rotating container, worm

gear arrangement, proximity sensor and Control

unit.

TRG0

M023

MULTI TOOL

CHANGING MACHINE.

ABSTRACT NO : M022

VIDEO NO : M022

In this project we are fabricating multi tool changing

machine. While during machining operations, it’s so difficult to change the tool every time. So, to avoid

this crisis, we are modeling a multi tool changing

machine in which we can do three processes such as



Hyderabad- 500096 Ph 9542878334.

riveting, punching and bending operation with the

same machine.

TRG0

M024

AUTOMATIC BOTTLE

FILLING MACHINES

USED BY SMALL TO

MEDIUM SIZED

COMPANIES

ABSTRACT NO : M023

VIDEO NO : M023

This analysis deals primarily with lower capacity

bottle filling machines used by small to medium sized

companies and excludes high speed rotary bottle

filling machines typically found only in the mass

market beverage industry. In contrast, the bottle

filling machines discussed here are used throughout

all industries including food, beverage, chemical,

cosmetic and pharmaceutical but at lower speeds. In

fact, most of the market for bottle filling machines in

terms of units sold is for semi automatic equipment

that operates at normal speed.

TRG0

M025

COIN BASED PEN

VENDOR FOR

SCHOOL/COLLEGE

CAMPUS

ABSTRACT NO : M024

VIDEO NO : M024

In this project we are fabricate the coin based pen

vendor. Using this project we can easily get the

required pen automatically. The project is very

useful for college and school stores and also useful

for stationeries and departmental stores. The

equipment consist of the following parts, motor,

IRRX and IRTX, Pen holding arrangement and

Control unit.

TRG0

M026

DESIGN AND

FABRICATION OF

SUPERVISOR ROBOT

FOR

INDUSTRIAL

ENVIRONMENT

ABSTRACT NO : M025

VIDEO NO : M025

The problem of determination is accessible region of

a robot working in industry. This problem appears

in the case of introducing a robot or a number of

robots in an existing manufacturing system. An

additional problem is raised when investigating the

above and has to be solved. For each serviced

location the robot has to rotate in desired location.

The main objective of this project is to reduce the

human fatigue and also to reduce the man power

and to observe the workers. Here we have fabricated

the supervisor robo for industrial environment. It’s a new innovative concept. This equipment has been

mainly developed for supervising the industrial

machines and workers to identify the workers

whether they are in their places or not. To avoid the

human fatigue and to reduce the man power here we

are using the crane and proximity sensor with

arrangement of camera, and we fixing the limit



Hyderabad- 500096 Ph 9542878334.

switch which is placed under the pad placed near the

machine. This equipment is very useful in all

industries.

TRG0

M027

FABRICATE THE

ELECTRO MAGNETIC

MOBILE SCRAP

COLLECTING

MACHINE.

ABSTRACT NO : M026

VIDEO NO : M026

In this project we are fabricate the electromagnetic

mobile scrap collecting machine. This concept we are

using the vehicle model, electro magnet, handle and

control unit to make the equipment. The

electromagnetic scrap collecting machine is operated

through less electrical power and the cost is less. So it

is suitable for small scale industries and workshops

to collect the scrap.

TRG0

M028

MATERIAL HANDLING

USING GEAR

MECHANISM

ABSTRACT NO : M027

VIDEO NO : M027

The objective of this project is to design a material

handling equipment using gear mechanism. Really

we can use this concept in many mechanical

industries, chemical industries for material handling

like inspection process for the machined

components. By using this equipment we can reduce

the human fatigue and save the work time etc., This

concept is used in the industrial companies for pick

and place application.

TRG0

M029

FABRICATED CNC

PUNCHING MACHINE

ABSTRACT NO : M028

VIDEO NO : M029

Here we have fabricated cnc punching machine it’s a new innovative concept. This machine has been

mainly developed for small and large scale

industries. This machine is very useful in produce

number of punches. Punching in metalworking is the

process of using a punch press to push a punch

through the material and into a die to create a hole

in the work piece. A scrap slug from the hole is

deposited into the die in the process. Depending on

the material being punched this slug may be recycled

and reused or discarded. The hole walls will show

burnished area, rollover, and die break and must

often be further processed. Punching is often the

cheapest method for creating holes in sheet metal in

medium to high production. Here we are using the

numerical control to run the machine, and it save the

time and man power requirement in the industries.

TRG0

M030

DESIGN &

FABRICATION OF JOB

ROTATING

ABSTRACT NO : M030

In this project we design a job rotating attachment

for milling machine by using the bevel gear method.

It is a hand operating method. The set up of this



Hyderabad- 500096 Ph 9542878334.

VIDEO NO : M030

project is shown below in the diagram. The model

consists of rack and pinion arrangement and ball

nose arrangement and shock absorber arrangement.

TRG0

M031

FABRICATION OF

HOME MADE AIR

CONDITIONING

SYSTEM

ABSTRACT NO : M031

VIDEO NO : M031

Here we have fabricated the home made air

conditioning system. It’s a new innovative concept. This system is fully fabricated simple in construction

with simple parts. This air conditioning system is less

in cost and good efficient. This equipment can be

used in homes, hotels, restaurants, departmental

stores and so all industries. Using this equipment we

can easily maintain the air conditioning in home. In

this setup we are using the pump, copper tube and

thermo coal shelled box for making the air

conditioning operations. The equipment is suitable

for anywhere which we need a air-conditioning

system

TRG0

M032

MULTISPINDLE

DRILLING MACHINE

WITH VICE UP & DOWN

ABSTRACT NO : M032

VIDEO NO : M032

In this project we design multi spindle drilling

machine. There are frequent needs of tightening and

loosening in screws, drilling, boring, grinding

machine. Huge and complicated designed parts

cannot be machined in ordinary machines. In a

single machine all the above specified operations can

be carried out, after drilling, the drill head is

removed from the barrel key and the required tools

like grinding application. By this we can achieve our

industrial requirements. This project is designed

with drill head, motor, drill bit and shaft.

TRG0

M033

INDUSTRIAL TROLLEY

ABSTRACT NO : M033

VIDEO NO : M033

888776666

In this project we have fabricated an industrial

trolley. This is helpful in industries for material

handling inside the industry. It is operated by motor.

In industries time saving is a major need. To fulfill

this need in industries here is a solution with the help

of trolley. This project also reduces the man power

involved in material handling.

AGRICULTURE PROJECTS

&



Hyderabad- 500096 Ph 9542878334.

INNOVATIVE MECHANICAL PROJECTS

S.NO NAME OF THE

PROJECT


S

TRG0

M034

WINDMILL BASED

WATER TAKING

FROM RIVER FOR

AGRICULTURE

ABSTRACT NO : M034

VIDEO NO : M034

Here is an easy way to lift the water using wind

power. The diagrammatical representation for the

windmill based water taking from river for

agriculture is shown below. It consists of windmill

blade, stand, scoops and a collecting tray. The main

purpose of this machine is to save electric power and

use of renewable energy in getting water from the

river. By using this machine large amount of water

can be lifted from rivers easily and also quickly.

TRG0

M035

MOTORIZED CATTLE

FEED CUTTING

MACHINE

ABSTRACT NO : M035

VIDEO NO : M035

Here we are fabricating the machine for cattle feed

cutting and it is know as chaff cutting machine. It is

nothing but the cutting process of the cattle’s feed. In this system we are employing electric power to run

the motor. Here we are using the worm gear

arrangement and spur gear arrangement to run this

process.

TRG0

M036

PNEUMATIC

MATERIAL

HANDLING VEHICLE

ABSTRACT NO : M036

VIDEO NO : M036

Here we are fabricating the model for moving the

heavy weight from one place to another place by

using pneumatic concept. The material handling

vehicle mainly consists of a pneumatic cylinder,

horizontal arm; material handling vehicle are used in

industrial application and also for constructional

applications. It is used to lift the heavy loads from one

place to another place.



Hyderabad- 500096 Ph 9542878334.

TRG0

M037

PNEUMATIC JCB

MODEL FOR

DIGGING PURPOSE

ABSTRACT NO : M037

VIDEO NO : M037

The pneumatic has gained a large amount of

importance in last few decades. This importance is

due to its accuracy and cost. These are the main

reasons for choosing pneumatic energy in the JCB

equipment. The major components in the project are

pneumatic cylinder, air gun, worm gear arrangement

and bucket.

TRG0

M038

SOLAR BASED

ALARM FOR ANIMAL

ENTRY PREVENTER

ABSTRACT NO : M038

VIDEO NO : M038

Objective of this project is to protect the farm from

the unknown persons and animals with help of solar

energy. In the hills side, due to presents of lot of

animals the farms are often destroyed by them, so the

human has to protect and secure their farms. But

now-a-days there is no time for the human beings to

do the work. Hence to avoid the human interface

(security) and also to protect the farms, we provide a

system called automatic electric farm protection

system

TRG0

M039

SOLAR FENCING

UNIT FOR

PROTECTION FROM

ANIMALS

ABSTRACT NO : M039

VIDEO NO : M039

The objective of this project is to secure people from

wild animals using fence electric shock using

MOSFET. This project is very useful to control the

wild animals and protect the surrounding and the

people in the farm.

TRG0

M040

POWER

GENERATION FROM

AGRI PUMP FORCE

ABSTRACT NO : M040

VIDEO NO : M040

Here we are fabricating a model for generating power

from agricultural pump force. Here this system is

used to generate the electric power through the

rotation of dynamo arrangement. Here the water is

collecting from the outside of river side etc.., and it

storage in tank in this tank we are using the

hydropower plant arrangement to generate the

electric power. Now day’s power demand is increased so this project is used to generate the electric power

in order to compensate the electric power demand



Hyderabad- 500096 Ph 9542878334.

TRG0

M041

DRESS WASHING

MACHINE USING

AGRI PUMP FORCE

ABSTRACT NO : M041

VIDEO NO : M041

The dress washing machine using agri pump force is

a new innovative concept mainly used to save power.

In this concept we have designed a washing machine.

It is used to wash cloths with help of agri pump force.

Now days washing the cloths are very easy by using

the electric power systems like washing machine but

these machines are very costly. Here instead of that

we have design the dress washing machine which is

operated by agri pump force to make the work easy.

TRG0

M042

WATER PUMPING

SYSTEM USING

RIVER FORCE

ABSTRACT NO : M042

VIDEO NO : M042

Water pumping system using river force is equipment

which is used to pump the water by using the water

flow in the river. The source for power, we are using

in this equipment is river water. It is easily available

and no cost. The main objective of this concept is to

generate mechanical energy through river force with

out using any other electrical energy or any other fuel

based energies. Nowadays lot of the water pumping

devices are available in the market, they are fully

worked in bases of electrical power sources. The

water pumping system using river force is a new

innovative model used to pump the water, without

based on any other electrical sources. So this concept

is useful to generate the mechanical energy from the

river force in order to reduce the manual pumping

system and also save the electric power.

TRG0

M043

HYDEL POWER

HAMMER

ABSTRACT NO : M043

VIDEO NO : M043

The main concept of this project is to automate

hammering process using Hydro power. The main

reason to do this project is, Continuous manual

process will result in human fatigue, therefore the

production may got reduced. This project can replace

all manual hammering processes. The major

components required are Hammer attached with

slider, chain drive, pump and roller with blade, etc.



Hyderabad- 500096 Ph 9542878334.

TRG0

M044

SOLAR BASED

WATER LIFTER

FROM RIVER-GIANT

WHEELMETHOD

ABSTRACT NO : M044

VIDEO NO : M044

Here is an easy way to lift the water using solar

power. The diagrammatical representation for the

solar powered water lifter from river - giant wheel

method is shown below. It consists of solar panel,

worm gear arrangement, DC motor, scoops and a

collecting tray. The main purpose of this machine is

to save time. By using this machine large amount of

water can be lifted from rivers easily and also

quickly. The power for the motor is given from the

solar panel.

TRG0

M045

GSM BASED MOTOR

AND VALVE

CONTROLLING

SYSTEM

ABSTRACT NO : M045

VIDEO NO : M045

The objective of this project is to control the motor

and pump valve through GSM (Global system for

Mobile Communication). In agriculture field, the

plants should be watered at the particular times for

the plant’s growth. In this running world, no one can be in a place at right time due to any busy. So by

using this project we control the Motor and Valve of

the water storage place, when we far from the Agri

field by using the GSM.

TRG0

M046

GSM BASED VALVE

CONTROLLING

SYSTEM: SYNOPSIS

ABSTRACT NO : M046

VIDEO NO : M046

The objective of this project is to control the pump

valve through GSM (Global system for Mobile

Communication). In agriculture field, the plants

should be watered at the particular times for the

plant’s growth. To fulfill this need we control the

valve by GSM.

TRG0

M047

GSM BASED MOTOR

ON / OFF CONTROL

SYSTEM

ABSTRACT NO : M047

VIDEO NO : M047

The objective of this project is to control the Motor

through GSM (Global system for Mobile

Communication). In agriculture field, the plants

should be watered at the particular times for the

plant’s growth. In this running world, no one can be in a place at right time due to any busy. So by using

this project we control this Water pump motor, when



Hyderabad- 500096 Ph 9542878334.

we far from the Agri field by using the GSM.

TRG0

M048

MECHANICAL SEED

THRESHER

ABSTRACT NO : M048

VIDEO NO : M048

In this project we design and fabricate a machine for

the purpose of threshing the seeds. In many

industries even now the seeds are separeated

manually. Due to this manual process in industries

there is watage of money and time. In order to avoid

this wastage we have designed the following model

called mechanical seed thresher.this is an advanced

and easy process to separate seeds from the plant.in

this process we do not need any electrical supply to

operate the machine.this model has thre following

parts in it.a fan,a slider with separator

arrangement,and a cam arrangement.

TRG0

M049

AGRICULTURE

SPRAYER BY HAND

OPERATED VEHICLE

ABSTRACT NO : M049

VIDEO NO : M049

This project is to fabricate a model called agricultural

sprayer. In olden days the spraying system was

handled manually. But in this generation there are

few types of machines for this process. Here we

implement a new idea for spraying water in

agricultural areas. By using a hand operated vehicle

we can easily operate the sprayer in required areas.

Since we use a hand operated vehicle with sprayer it

is called as agricultural sprayer by hand operated

vehicle. This project consists of a hand operated

vehicle, a water tank, a pump and a cam

arrangement.

TRG0

M050

SUPER GARDENING

WHEEL BARROW

ABSTRACT NO : M050

VIDEO NO : M050

Here we fabricate the super gardening wheel barrow.

This project is useful in gardens, nurseries etc. The

objective of this project is to reduce strain on the

operator, and keep loads level. This project

significantly reduces the effort required to lift and

transport materials over a wide range of surfaces.

The main parts of this project is container and frame



Hyderabad- 500096 Ph 9542878334.

this is simple in construction.

TRG0

M051

FABRICATION OF

SOLAR AGRO

SPRAYER WITH

GROUND DRYER

ABSTRACT NO : M051

VIDEO NO : M051

Agro sprayer and ground dryer are most important

equipment in agriculture appliance. It consists of

solar panel, DC motor pump, battery, water tank and

heater. It consumes electric power to run. But the

pump are mostly running continuously around five or

more hours due to the need of work. So we can save

the electric power. So that this method is mainly

employed in order to save the electrical energy. Some

of the methods are followed but the solar operated is

best suitable method for recent generation to utilize

the solar energy as the input power. For that solar

operated motor pump is taken into account. And the

ground dryer is used to make dry of the ground with

help of heater which is fixed in bottom of the

TRG0

M052

MOTOR OPERATED

VEGETABLE

CUTTING MACHINE

ABSTRACT NO : M052

VIDEO NO : M052

In this project we are fabricate the motor operated

vegetable cutting machine. The main aim of the

project is to reduce the man power, time consumption

during the vegetable slicing and other food processing

in hotels. The power source is considered to be

electrical power due to its availability, and easy to

store it on battery. This arrangement consists of

motor, cam, control unit, cutting blade and table.

TRG0

M053

SOLAR POWERED

AGRICULTURE

WATER PUMPING

SYSTEM WITH AUTO

TRACKING

ABSTRACT NO : M053

VIDEO NO : M053

This is new innovative model which is used to control

the water pumping system for agricultural field and

also in garden. The system consists of solar panel,

control unit, battery, water tank, LDR, limit switch,

pump and DC motor. The equipment is fully

operated automatically by using micro controller.

The solar panel changes its direction towards the

sunlight automatically. It is used to reduce the

manual adjustments of the solar panel. This project is



Hyderabad- 500096 Ph 9542878334.

used to Automatic adjustment of solar panel and

water pumping Application in the agricultural areas.

Solar energy is used to give the power to pump

because now a days power demand is increased due

to this power failure happen many time.

TRG0

M054

FABRICATION OF

SOLAR SEED DRYER

WITH AUTO

TRACKING SYSTEM

ABSTRACT NO : M054

VIDEO NO : M054

It is a new innovative concept specially designed for

agricultural purposes. This project is used to get dry

seeds with the help of hot air. By this process

electrical energy and time can be saved. It consists of

aluminium plate, fins, fan and steel net dc motor with

worm gear arrangement. The working of all these

parts helps us to get a dry seed out of it very quickly.

This project is effective when compared to any other

project.

TRG0

M055

PORTABLE AGRI

CUTTER

ABSTRACT NO : M055

VIDEO NO : M055

This is the new innovative and effective concept

mainly used for agricultural field. It is simple in

construction and the working process is also very

easy. It is mostly used in the agricultural field for the

cutting of crops, sugarcane, wooden pieces and etc..,

the model consists of a pedal arrangement, cutter,

supporting frame, seat arrangement.

TRG0

M056

SEED SOWING

MACHINE

ABSTRACT NO : M056

VIDEO NO : M056

The seed sowing machine is used to sowing the seeds

into land for making lots of plant production in

agricultural field. It is a mechanical device here no

electrical or other power source is not required. The

cost of this machine is very low and easy to operate

simple in construction.

TRG0

M057

CATTLE FEED

CUTTING

MACHINE HAND

OPERATED

ABSTRACT NO : M057

VIDEO NO : M057

TRG0 FABRICATION OF In this project we fabricate solar irrigation system



Hyderabad- 500096 Ph 9542878334.

M058 SOLAR

IRRIGATION

SYSTEM

ABSTRACT NO : M058

VIDEO NO : M058

this is a new innovative concept. Agricultural motor

pump is most important in the agriculture field. It

consumes electric power to run the motor pump.

Here we are using solar power to generate the electric

power to run the motor. In this project electrical

power is generated through the solar panel so this

equipment compensates the electrical power demand

and very much helpful to agricultural field. It consists

of the following parts namely Solar panel, Battery,

DC Pump and Control unit.

TRG0

M059

SOLAR SEED

DRYER

ABSTRACT NO : M059

VIDEO NO : M059

In this project the working of solar seed dryer is

explained with the neat diagram. There may be few

other methods of producing hot air but this is the

most economical way to produce hot air. It is the long

time investment. Copper plate takes a major role in

this process. The purpose of the copper plate is to

heat the air. This happens because of absorbing heat

from the sun directly. The project consists of

insulation sheet, fins and fans.

TRG0

M060

FABRICATION OF

COCONUT TREE

SPRAYER

ABSTRACT NO : M060

VIDEO NO : M060

Recently in agricultural field, the growth of the

coconut tree is affected by harmful insects. This

attacks mainly the outer layer of the coconut. In

order to reduce the attack various methods are

employed. But in our project spraying equipment

such as spraying nozzle, and pump are used. Here we

implement a new idea for spraying insecticides and

pesticides for coconut tree. By using a hand operated

vehicle we can easily operate the sprayer in required

areas. This project consists of a hand operated

vehicle, a water tank, a pump and a cam

arrangement.

TRG0

M061

FABRICATION OF

SEED SPRAYER

ABSTRACT NO : M061

In the agriculture field, we will be spraying the seeds

in order to have good harvest of the particular plant.

We are spraying the above mentioned things by

charging the battery with the help of electrical power



Hyderabad- 500096 Ph 9542878334.

VIDEO NO : M061

supply & by other means. This project is very useful

in agriculture field to reduce the time of work and

easy way to implement this process. This project is

designed by the following blocks Battery, and fan.

TRG0

M062

AUTOMATIC

WATER TAP

CONTROLLING

SYSTEM

ABSTRACT NO : M062

VIDEO NO : M062

In this project we have designed automatic water tap

controlling system. The main blocks used in this

project are IR transmitter, IR receiver and Water

tank. WORKING PRINCIPLE When the object

comes near the tap, the signal from the IR

transmitter falls on the object. The signal from the IR

transmitter gets deviated. The reflected signal from

the object is given to IR receiver. Thus control unit

sends signals to the solenoid valve. The valve opens,

so that the water flows through the pipe for certain

period and the solenoid closes and the water flow

stops.

TRG0

M063

WATER PUMPING

SYSTEM USING

WINDPOWER

ABSTRACT NO : M063

VIDEO NO : M063

TRG0

M064

FABRICATION OF

AGRICULTURAL

MOTOR PUMP

RUNNING WITH

SOLAR POWER

ABSTRACT NO : M064

VIDEO NO : M064

In this project we fabricate the agricultural motor

pump running using solar power this is a new

innovative concept. Agricultural motor pump is most

important in the agriculture field. It consumes

electric power to run the motor pump. Here we are

using solar power to generate the electric power to

run the motor. In this project electrical power is

generated through the solar panel so this equipment

compensates the electrical power demand and very

much helpful to agricultural field. It consists of the

following parts namely Solar panel, Battery, DC

Pump and Control unit.

FABRICATION OF

The main aim of the project is to reduce the man



Hyderabad- 500096 Ph 9542878334.

TRG0

M065

TOTATO GRADER

ABSTRACT NO : M065

VIDEO NO : M065

power, time consumption during the vegetable

processing in markets. The power source considered

here is pneumatic power due to its availability, quick

response. This arrangement consists of belt conveyor,

geneva mechanism, load cell, pneumatic cylinder,

solenoid valve, and collecting boxes.

CONVENTIONAL & NONCONVENTIONAL

TRG0

M066

SOLAR OPERATED

MULTI NUT

TIGHTNER/REMOVER

ABSTRACT NO : M066

VIDEO NO : M066

The main concept of the proposed system is nut

fitting & removing without human help for

driving. The heart of the project is motor. The

components used here for efficient function of

individual blocks are Motor, Nut fitting

arrangement (spanner) and spur gear

arrangement.

TRG0

M067

FABRICATION OF

GENEVA CONVEYOR

ABSTRACT NO : M067

VIDEO NO : M067

This is the new innovative concept mainly used

for industries. It is simple in construction and the

working process is easy. In industries, it is very

necessary to move the components from one area

to the other in a regular basis. It is necessary to

minimize the workers involved in it. We have

designed a conveyor with Geneva drive which is

useful in industries. So, here we have made a

conveyor model which is used for material

transformation from one place to another. Main

components used in this project are motor, belt,

roller, bearing and Geneva wheel.

TRG0

M068

BICYCLE WIND

TURBINE

8ABSTRACT NO : M068

VIDEO NO : M068

The objective of this project is to generate

electric power through fabrication of Bicycle

wind turbine. A wind turbine is a machine that

converts the kinetic energy (rotational energy)

from wind into electrical energy. These are drag-

type devices with two (or more) scoops that are

used in anemometers. They always self-start if

there are at least three scoops. They sometimes



Hyderabad- 500096 Ph 9542878334.

have long helical scoops to give a smooth torque.

It also has an airfoil based design to harness the

kinetic energy of the fluid flow via an artificial

current around its center. It is differentiated

from others by its capability to unitize most of

the air mass passing through redirecting it to

flow over the upper chamber of the airfoils, and

causing a lift force

TRG0

M069

SOLAR POWERED

VISITOR GUIDED

WITH MATERIAL

HANDLING VEHICLE

ABSTRACT NO : M069

VIDEO NO : M069

In our project we have designed fully automated

visitor guided with material handling vehicle.

Automatic guided vehicle is a mobile robot used

in industrial applications to move materials

around a manufacturing area or a warehouse.

Solar panel, Proximity Sensor, DC Motor, Wheel,

and Material handling vehicle are the main

blocks in this project.

TRG0

M070

SOLAR OPERATED

SPEED BREAKER

ABSTRACT NO : M070

VIDEO NO : M070

The objective of this project is to control solar

panel position depends upon the sun light and

time. This project is very useful to save electrical

energy. This project is designed with solar

panels, control unit, RTC along with motor.

TRG0

M071

SOLAR OPERATED

HANDICAPPED

WHEEL CHAIR WITH

TILTING

ARRANGEMENT

ABSTRACT NO : M071

VIDEO NO : M071

Mechanical Recliner is the innovative project

which is used for aged persons to get up from

their seats without any hesitation. This is also

used for those patients who are having problems

in their knees. Electric motor is used to operate

the wheel chair. The power from the sunlight is

used to run the motor.

TRG0

M072

SOLAR OPERATED

GOPED VEHICLE

Nowadays petrol and diesel fuel consumption and

cost are very high. So we go in search of

alternative fuel. Alternative fuels save the natural

sources. Electric motor is used to run the vehicle.

The power from the sunlight is used to run the



Hyderabad- 500096 Ph 9542878334.

ABSTRACT NO : M072

VIDEO NO : M072

motor. We run the vehicle with maximum

environment friendly and safety manner. In this

solar operated goped vehicle we have more

flexibility and well equipped design attributes to

operate. Control actions are easily accessible and

easily controllable. Mostly goped vehicle is

compact in design and construction. Mechanical

stability and damped device such as suspension

system help it for more cushioning effect and it

has enough degrees of freedom to operate.

TRG0

M073

SOLAR BASED

AUTOMATIC

STAMPING MACHINE

(WITH

CONVEYOR

ABSTRACT NO : M073

VIDEO NO : M073

Here we are fabricating the model for automatic

stamping machine which can be used in

embossing the soap material. Here we fabricate a

model for stamping machine. This model works

with the help of solar panel. This can be done as

shown in the below figure. It is an effective way

among stamping machines

TRG0

M074

WINDMILL OF SAIL

TYPE

ABSTRACT NO : M074

VIDEO NO : M074


electric power through the fabrication of Helix

wind mill. A wind turbine is a machine that

converts the kinetic energy in wind into

mechanical energy. If the mechanical energy is

used directly by machinery, such as a pump or

grinding stones, the machine is usually called a

windmill. Helix windmill with rotational sails

have the main rotor shaft running vertically. Key

advantages of this arrangement are that the

generator and/or gearbox can be placed at the

bottom, near the ground, so the tower doesnt

need to support it, and that the turbine doesnt

need to be pointed into the wind. Drawbacks are

usually pulsating torque that can be produced

during each revolution and drag created when

the blade rotates into the wind. It is also difficult

to mount vertical-axis turbines on towers,

meaning they must operate in the often slower,

more turbulent air flow near the ground,



Hyderabad- 500096 Ph 9542878334.

resulting in lower energy extraction efficiency.

This project is designed with Wind mill

arrangement, Dynamo, and Battery.

TRG0

M075

WINDMILL OF

CYLINDRICAL TYPE ?

VERTICAL AXIS

ABSTRACT NO : M075

VIDEO NO : M075


electric power through the fabrication of

Savonius wind mill. A wind turbine is a machine

that converts the kinetic energy in wind into

mechanical energy. If the mechanical energy is

used directly by machinery, such as a pump or

grinding stones, the machine is usually called a

windmill. They can be made many different ways

with buckets, paddles, sails, and oil drums. The

Savonius rotor is S-shaped (when viewed from

above). All of these designs turn relatively slowly,

but yield a high torque. They can be useful for

grinding grain, pumping water, and many other

tasks; but are not good for generating large

amounts of electricity. One might use a gearbox,

but then

TRG0

M076

WINDMILL BASED ON

CYCLE RIM ?

HORIZONTAL AXIS

ABSTRACT NO : M076

VIDEO NO : M076


electric power through the fabrication of Cycle

rim type wind mill. A wind turbine is a machine

that converts the kinetic energy (rotational

energy) in wind into mechanical energy. These

are drag-type devices with two- (or more) scoops

that are used in anemometers. They always self-

start if there are at least three scoops. They

sometimes have long helical scoops to give a

smooth torque.It also has an airfoil base designed

to harness the kinetic energy of the fluid flow via

an artificial current around its center. It is

differentiated from others by its capability to

unitize most of the air mass passing through

redirecting it to flow over the upper chamber of

the airfoils, and causing a lift force all around. It

is applicable not only to wind, but also to a

variety of hydroelectric applications, including

free-flow (rivers, creeks), tidal, oceanic currents

and wave motion, via ocean wave surface

currents. This project is designed with Wind mill



Hyderabad- 500096 Ph 9542878334.

arrangement, Dynamo, and Battery.

TRG0

M077

SOLAR POWERED

GRINDING MACHINE

ABSTRACT NO : M077

VIDEO NO : M077

In this concept we have designed the solar

powered grinding machine. The solar powered

grinding machine is useful equipment for

industries because we are generating the power

from direct sunlight with help of solar panel.

This is the non conventional method we are using

here to run the grinding machine. So this

equipment can save the electric power during

grinding process in industries. Solar panel,

Battery, Motor and Grinding wheel are the main

components used in this project.

TRG0

M078

ELECTRICAL POWER

GENERATION FROM

SHOCK

ABSORBER

ABSTRACT NO : M078

VIDEO NO : M078

The objective of this project is to generate the

electric power through the fabrication of shock

absorber arrangement. Nowadays power demand

is increased, so this concept is used to generate

the electrical power in order to compensate the

electric power demand.

TRG0

M079

SOLAR CYCLE

ABSTRACT NO : M079

VIDEO NO : M079

All automobile vehicles consume the fuel for

running. Nowadays the demand of fuel and cost

of fuel is increased. So we need other resources of

energy is for transportation. So that we are go for

other type of energy like electric power, solar

power etc…It may be noted that solar energy is

easily available with free of cost. The one motor

is used to run the cycle. Another use of the

PMDC hub motor is fixed for the extra power

generation. So it called also as double way power

bicycle.

TRG0

M080

SOLAR SEED

SPRAYER

ABSTRACT NO : M080

VIDEO NO : M080

In the agriculture field, we will be spraying the

seeds in order to have good harvest of the

particular plant. We are spraying the above

mentioned things by charging the battery with

the help of electrical power supply & by other

means. This project is very useful in agriculture

field to reduce the time of work and easy way to

implement this process. This project is designed



Hyderabad- 500096 Ph 9542878334.

by following blocks Solar panel, Battery,

Charging circuit and fan.

TRG0

M081

SOLAR AIR COOLER

ABSTRACT NO : M081

VIDEO NO : M081

Cooling process is very important to maintain the

foods, fish and many items at constant

temperature to avoid the effect of viruses.

Cooling process employs the different methods to

cool the air. But considering the lower

application and cost effective the water cooling

system is considered for our project. The main

aim of our project is to supply the cooled air with

the help of water circulation. It consists of Solar

panel, Battery, Fan, Water tank and Pump.

TRG0

M082

WATER PUMPING

SYSTEM USING

WINDMILL

ABSTRACT NO : M082

VIDEO NO : M082

In this project wind energy is used for pumping

the water from lower ground. Wind energy is the

renewable and widely distributed energy. Wind

is the rough horizontal movement of air caused

by uneven heating of earth. So that wind energy

is used to convert the required form of energy

and it is utilized for useful work. According to

the wind speed the energy conversion will vary.

TRG0

M083

SOLAR BASED

COFFEE VENDING

MACHINE

ABSTRACT NO : M083

VIDEO NO : M083

The objective of this project is to vend coffee

automatically without man. Automation is a

concept that has become a keyword in the

industry today. A product that is highly reliable

quality yet cost effective only survives in the

competitive world today. This can be achieved

effectively only by a good automotive system.

Automation is essential for increased

productivity and improved quality, reduction

process inventory, increased safety of working

personal etc. This project is very useful for

canteen, hotels, and in public places in order to

vend coffee. This project is designed with solar

panel, battery, control unit, dc pump, decoction

tank, and milk tank.

TRG0

M084

SOLAR BASED WATER

VENDING MACHINE

ABSTRACT NO : M084

The objective of this project is to vend water

automatically when coin is inserted. Automation

is a concept that has become a keyword in the

industry today. A product that is highly reliable

quality yet cost effective only survives in the



Hyderabad- 500096 Ph 9542878334.

VIDEO NO : M084

competitive world today. This can be achieved

effectively only by a good automotive system.

Automation is essential for increased

productivity and improved quality, reduction

process inventory, increased safety of working

personal etc. This project is very useful for bus

stand, railway stations in order to vend water.

This project is designed with control unit, pump,

tank, solar panel, battery, and coin mechanism.

TRG0

M085

ELECTRICAL POWER

GENERATION FROM

FOOT STEP

ABSTRACT NO : M085

VIDEO NO : M085


electric power through the fabrication of foot

step arrangement. Now day’s power demand is increased, so this project is used to generate the

electrical power in order to compensate the

electric power demand. Rack & pinion

arrangement, Foot step arrangement, spur gear

arrangement, chain drive, and dynamo are the

main components used in this project.

TRG0

M086

ELECTRICAL POWER

GENERATION FROM

SPEED BRAKE

ABSTRACT NO : M086

VIDEO NO : M086

It’s a power generating device, which can generate the power whenever the vehicles run on

the speed breaker. A simple method of this is

spring system during the time of vehicles run

over the spring goes up and down; it helps to

rotate the dynamo efficiently. While the dynamo

rotation it generates the electric DC power, we

can store it by battery. Also we can use it as AC

supply with the help of inverter. A system

embedded in a road surface generates power

from the passage of motor vehicles.

TRG0

M087

ELECTRICAL POWER

GENERATION BY

GYM UNIT

ABSTRACT NO : M087

VIDEO NO : M087


electric power by GYM unit. The power will be

generated by the pushing movement of the pump

activated by human beings. Now day’s power demand is gradually more, so the project has

been developed to generate the electrical power

in order to compensate the electric power

demand.

TRG0

M088

SOLAR DAM SHUTTER

CONTROL

This project helps us in the automatic opening

and closing of shutter in the Dam. This work is

performed without human intervention. The level



Hyderabad- 500096 Ph 9542878334.

ABSTRACT NO : M088

VIDEO NO : M088

probe indicates the level of water in the Tank.

The system comprises of the following

components like level probe sensor, limit switch,

microcontroller, motor, a solar panel and shutter.

The level probe which is placed inside the tank

indicates the water level.

TRG0

M089

SOLAR BASED

TIMING OPERATED

COLLEGE SIREN

ABSTRACT NO : M089

VIDEO NO : M089

In olden days a person will be appointed for

indicating the time after certain period. Since the

process was carried out manually it may not be

accurate. To avoid this we have suggested and

tried a new way which is operated automatically.

We also implement the concept with the help of

solar panel. The model consists of solar panel,

battery, RTC, EEPROM, siren.

TRG0

M090

SOLAR OPERATED

WIRELESS HELPER

FOR ARMY

ABSTRACT NO : M090

VIDEO NO : M090

This project is to design a line following robot

with dc gun and camera. This project is very

much useful in army. This is very useful to detect

the object and shoot at a particular time.

TRG0

M092

SOLAR WHEEL CHAIR

FOR PHYSICALLY

DISABLED PERSONS

ABSTRACT NO : M091

VIDEO NO : M091

The main purpose of this concept is used to

implement the solar wheel chair for physically

disabled. In this project we have fabricated the

simple equipment for the handicapped persons

by using simple arrangements. These equipments

are so useful to the handicapped persons travel

long distance in his wheel chair.

TRG0

M092

SOLAR FAN AND

LIGHT CONTROL

SYSTEM

ABSTRACT NO : M092

Now-a-days, instead of using the power from the

supply line for various operations, most of them

are going for solar energy source, as it is

cheapest. They trap the solar energy and they are

using it for several applications. One such type of

application is solar based light control system.

This is the cheapest method and moreover we are



Hyderabad- 500096 Ph 9542878334.

VIDEO NO : M092 attaining our desired target. This proposed

system uses inexpensive energy such as solar with

combination of fan to provide cooling. Solar

power channels the sun’s energy and produces

electricity through photovoltaic cell. A solar cell

or photovoltaic cell is a device that converts light

energy into electrical energy. There two functions

fulfill the operation: photo generation of charge

carriers and separation of charge carriers. The

block consists of Solar panel, Battery Unit, switch

and Fan and light.

INDUSTRIAL PRODUCTION MANUFACTURING

S.NO NAME OF THE

PROJECT


S

-

/

-

TRG0

M093

MINI MACHINE FOR

TENDER COCONUT ABSTRACT NO : M093

VIDEO NO : M093

This project is to design a mini machine for tender

coconut. This project has collecting tank, support,

and tube. The water of Tender Coconut is a sterile,

nutritious, thirst quenching health drink. The pure

and sweet tender coconut possesses enormous

therapeutic properties and is a thirst quenching

refreshing health drink for all age groups

TRG0

M094

DESIGN AND

FABRICATION OF

TOGGLE MACHINE ABSTRACT NO : M094

VIDEO NO : M094

This project deals with design and fabrication of

toggle mechanism. Combination of solid, usually

metallic links (bars), connected by pin (hinge)

joints arranged so that a small force applied at one

point can create a much larger force at another

point. It is easy to operate.

TRG0 FABRICATION OF The present invention provides a remote



Hyderabad- 500096 Ph 9542878334.

M095 REMOTE

CONTROLLED

SCRAP

COLLECTING

VEHICLE ABSTRACT NO : M095

VIDEO NO : M095

controlled system for transferring scrap resulted

from at least one scrap source of a clean room to a

scrap exit. The electromagnetic scrap collecting

machine is operated through less electrical power

and the cost is less. So it is suitable for small scale

industries and workshops to collect the scrap. The

equipments used here is controller,

electromagnetic coil, dc motor and a remote

controller.

TRG0

M096

MATERIAL

INSPECTION AND

DIMENSIONING

CONVEYER

ABSTRACT NO : M096

VIDEO NO : M096

The main aim of this concept is used to optimize

the measuring the height of work piece. Normally

we will use plug gauges to measure the

components. Instead of using manual inspection

here we are introducing the automatic system by

using the pneumatic comparators. The manual

inspection is not full of efficient so we need some

improvement in this measuring device. In this

device the dimensions are calculated by using this

comparator setup. The components are moved

from one place to another with the help of Geneva

conveyor. It is necessary to minimize the workers

involved in it. We have designed a conveyor with

Geneva drive which is useful in industries. So, here

we have made a conveyor model which

TRG0

M097

MOTORIZED SEED

SEPARATOR ABSTRACT NO : M097

VIDEO NO : M097

In this project we are designed a seed sorting

machine. The operation of seed separator is

performed by using by an A.C motor and cam

mechanism and seed separator tray arrangement.

The every tray has several and different diameters

of holes depend upon the seed diameter.

TRG0

M098

DRESS WASHING

ATTACHMENT IN

MANUAL TREAD

MILL

ABSTRACT NO : M098

VIDEO NO : M098

The dress washing attachment in manual tread

mill is a new innovative concept mainly used to

save power and also acts as an exercise. This is a

new innovative concept. A treadmill is an exercise

machine for running or walking while staying in

one place. The machine provides a moving

platform with a wide conveyor belt. So this project

is a good innovation to save the electrical current

to solve the future demand. This project consist

the following parts, Belt, Roller, rack and pinion,



Hyderabad- 500096 Ph 9542878334.

blades to wash clothes, cam arrangement, and

Support.

TRG0

M099

DRESS WASHING

ATTACHMENT IN

GYM CYCLE

ABSTRACT NO : M099

VIDEO NO : M099

The dress washing attachment in gym cycle is a

new innovative concept mainly used to save power

and also acts as a cycling exercise. In this concept

we have fabricated a dress washing machine used

to wash clothes without using electric power.

Nowadays power demand has increased using the

electrical washing machine consumes power and

this machines are costly. Instead of that we have

designed the dress washing machine using manual

pedaling to make the work easy.

TRG0

M100

ADVANCED HAND

OPERATED FLOOR

MOPPING VEHICLE

ABSTRACT NO : M100

VIDEO NO : M100

This project is specially designed to clean the

floors with a mechanical equipped device.

Nowadays it is a time consuming process to clean

the floors in shopping malls, apartments, theatres

and offices and also it is a must to keep the

environment clean. So we are doing a project to

meet this problem with a mechanically equipped

device. This is a manually operated device, which

contains chain drive, cam arrangement, mopping

arrangement and worm gear arrangement for

cleaning the floor.

TRG0

M101

HYDRAULIC

SHEARING

MACHINE

ABSTRACT NO : M101

VIDEO NO : M101

Here we are fabricating the model hydraulic

shearing cutting machine. Hydraulics is a topic in

applied science and engineering dealing with the

mechanical properties of liquids. Fluid mechanics

provides the theoretical foundation for hydraulics,

which focuses on the engineering uses of fluid

properties. In fluid power, hydraulics is used for

the generation, control and transmission of power

by the use of pressurized liquids. The hydraulic

press depends on Pascals principle; the pressure

throughout a closed system is constant.

TRG0

M102

GYM BASED WATER

PUMPING SYSTEM

ABSTRACT NO : M102

VIDEO NO : M102

The gym based water pumping system machine is

a new innovative concept is mainly used to save

power. In this concept we have designed a gym

based water pumping system. Here we are using

the mechanical energy for pumping the water

without using any other electrical energy or any



Hyderabad- 500096 Ph 9542878334.

other fuel based energies.

TRG0

M103

AUTO ROLL

PUNCHING

MACHINE ABSTRACT NO : M103

VIDEO NO : M103

In this project we are fabricating Auto roll

punching machine. This project is specially

designed for automatic punching in work piece.

This project is to introduce automation in

industries. The major components involved in this

project are dc motor, CAM arrangement,

conveyor arrangement and punching tool.

TRG0

M104

AUTOMATIC

CARPARKING

SYSTEM

ABSTRACT NO : M104

VIDEO NO : M104

Automatic car parking system

TRG0

M105

UNIFORM ROD

CUTTING MACHINE ABSTRACT NO : M105

VIDEO NO : M105

This project is used to cutting rod/pipe in uniform

length. This process can be used in the small scale

industries to cut the metal rods. Many industries

like building constructors, manufacturing

industries employ workers to cut the rod by

measuring the length of it. In our project we are

providing a machine to cut the rod with uniform

length and also help to reduce time.

TRG0

M106

MOTORIZED

HAMMER

ABSTRACT NO : M106

VIDEO NO : M106

The main aim of this concept is to reduce the

human fatigue and time savings in industries by

converting the manual work into automation using

latest technologies. Here we have fabricated the

electrical hammer. The electrical hammer is a

device used for forging the metal, bend removing

for steel bars and also used for sheet metal works.

The project consists of the following parts

Hammer, Hammer handle, Supporting column,

Cam and Motor

TRG0

M107

FABRICATION OF

AUTOMATIC PAPER

COUNTING

MACHINE

ABSTRACT NO : M107

The objective of this concept is to design the sensor

operated paper counting machine. This machine is

used to reduce the manual work of paper

counting, and also time saving. This machine is

very useful for paper manufacturing industry also

we can avoid the human errors and it can be used



Hyderabad- 500096 Ph 9542878334.

VIDEO NO : M107

in schools, collages, stationary shops, paper stores,

etc. This project is designed by roller, sensor,

collecting tray, paper bundle, and control unit.

TRG0

M108

PNEUMATIC

RECIPROCATING

WATER PUMPING

SYSTEM

ABSTRACT NO : M108

VIDEO NO : M108

The main objective of this project is to pump the

water with very less electric power. The process is

carried out by the pneumatic cylinder and the

compressed air. The model consists of a tank, non

return valve and a pneumatic cylinder. The

concept is pneumatic since it is easy to operate and

also a quick process. The concept can bring a

drastic change in the field of mechanical especially

for lubrication purpose in the machining areas.

TRG0

M109

FABRICATION OF

PNEUMATIC

MULTIPURPOSE

GRINDER

ABSTRACT NO : M109

VIDEO NO : M109

Here we have fabricated the pneumatic

multipurpose grinding machine; it’s a new innovative concept. This machine has been mainly

developed for grinding the specimen to get a good

surface finish. In this machine we have using the

pneumatic source of air operated device. This

equipment has a good efficiency compared to

other and also forward and reverse speed is

constant in pneumatic, so good finishing is

obtained by using this machine.

TRG0

M110

BIRDS SCARER

EQUIPMENT

ABSTRACT NO : M110

VIDEO NO : M110

Bird scarer is an excellent concept used in all

agricultural lands. Mostly, while the farmers

cultivating crops which are edible for the birds, it

is big head ache for them to save the crop from

birds being wasting that. Especially birds like

crow, mynah, white crane etc., will eat the crops

while growing and make them not to grow no

more. Then it will result in big loss to the farmers.

So in order to avoid the birds from spoiling the

cultivated land bird scarer can be used. Though, at

present scare crows are used it’s not so efficient in

scaring birds since it is an ordinary one. This

project consists of the following parts Solar panel,

Battery and Speaker.

TRG0

M111

FABRICATION OF

AUTOMATIC

STEERING

MECHANISM

The four wheel steering control is an innovative

concept which is mainly used for four wheeler

vehicles. This system employed by some vehicles to

improve steering response, increase vehicle



Hyderabad- 500096 Ph 9542878334.

ABSTRACT NO : M111

VIDEO NO : M111

stability while maneuvering at high speed, or to

decrease turning radius at low speed. We are

introducing small model of four wheeler steering

control through this project. The project consists

of servo motors, pot, and control unit and vehicle

model.

TRG0

M112

DRILLING AND

TAPPING MACHINE

ABSTRACT NO : M112

VIDEO NO : M112

In this concept we have designed a drilling and

tapping machine. It is used to reduce the cost

expansive of small-scale industries and save the

flour space of the machine shop. So the drilling

and tapping is a new innovative concept that we

have designed for only light loaded components. In

a single machine all the above specified operation

can be carried out, after drilling, the drill head is

removed from the holder and the required tools

can be fixed.

TRG0

M113

VALVE LAPPING

MACHINE

ABSTRACT NO : M113

VIDEO NO : M113

Lapping is the finest machining method that

allows very high surface qualities, form accuracies,

and very close dimensional tolerances. Lapped

surfaces are flat-lustrous and are characterized by

isotropic properties. The specific surface structure

of lapped surfaces offers an especially good basis

for polishing. Nearly all materials can be lapped,

which are not subject to plastic deformation due to

their own weight or to mechanical load by

machining: metals, nonferrous metals, insulating

materials, glass, natural materials such as marble,

granite, basalt, gemstones of all kinds, plastics,

semiconductors such as silicon, germanium, and

materials like carbon and graphite. A uniform

material removal is also guaranteed in the case of

machining compound materials.

TRG0

M114

FABRICATION OF

PEDAL WASHING

MACHINE

ABSTRACT NO : M114

VIDEO NO : M114

The pedaling dress washing machine is a new

innovative concept is mainly used to save power.

In this concept we have designed a pedal washing

machine. It is used to washing the cloth without

using electric power. Now days washing the cloths

are very easy by using the electric power systems

like washing machine but these machines are very

costly which is only using by the rich people.



Hyderabad- 500096 Ph 9542878334.

Instead of that we have design the pedal dress

washing machine for the poor people to make their

work easy. The components using in this project

are Rack and pinion, shaft, drum, cam and

pedaling arrangement etc.

TRG0

M115

AUTOMATIC

PNEUMATIC GEAR

CHANGER

ABSTRACT NO : M115

VIDEO NO : M115

The main objective of this concept is to apply the

gear by using automation system in automobiles.

This is the new innovative model mainly used in

two wheelers to control the vehicle. In this project

we design the pneumatic gear changing

mechanism in two wheeler vehicles by using the

pneumatic cylinder. By using this we can easily

control the vehicle and improve the performance

of the vehicle also we can avoid the wear and tear

of the gear.

TRG0

M116

DESIGN AND

FABRICATION OF

AUTO FEED

DRILLING

MACHINE

ABSTRACT NO : M116

VIDEO NO : M116

In small-scale industries and automatic

maintenance shops, there are frequent needs of

tightening and loosening in screws, drilling,

boring. By this concept we can achieve our

industrial requirements. The main objective of our

project is to perform various machining

operations using” auto feed mechanism” in drilling machine with the help of motor. For a

developing industry the operation performed and

the parts (or) components produced should have it

minimum possible production cost, which helps

the industries to run profitability. In this

arrangement motor is also used for indexing

purpose.

TRG0

M117

FABRICATION OF

AUTOMATIC

PUNCHING /

RIVITING

CONVEYOR

ABSTRACT NO : M117

VIDEO NO : M117

This is the new innovative concept mainly used for

industries. It is simple in construction and the

working process is easy. In industries, the

punching and printing process is a main concern.

It is necessary to minimize the workers involved in

it. We have designed a conveyor with Geneva

drive for the punching and printing operation

which is useful in industries. So, here we have

made a conveyor model which is used for material

transformation from one place to another. Main

components used in this project are motor, belt,



Hyderabad- 500096 Ph 9542878334.

roller, pneumatic cylinder, solenoid valve, object

sensor, bearing and Geneva wheel.

TRG0

M118

AUTOMATIC POWER

SAVING PUNCHING

CONVEYOR FOR

INDUSTRIAL

APPLICATION

ABSTRACT NO : M118

VIDEO NO : M118

There are two main industrial classes of belt

conveyors; those in general material handling such

as those moving boxes along inside a factory and

bulk material handling such as those used to

transport industrial and agricultural materials,

such as grain, coal, ores, etc, in outdoor locations.

Generally companies providing general material

handling type belt conveyors do not provide the

conveyors for bulk material handling. In addition

there are a number of commercial applications of

belt conveyors.

TRG0

M119

FABRICATION OF

MATERIAL

DIMENSION

INSPECTION

CONVEYOR

ABSTRACT NO : M119

VIDEO NO : M119

Conveyor systems are being used in many

industrial applications in this project conveyor is

used to inspect the quality of given object with the

help of computer and it differentiates the object in

to two qualities. One is the accepted quality and

the other is rejected quality. This project is

designed by, control unit, conveyor model, Dc/Ac

motor, web camera, DC gun and object sensor.

TRG0

M120

EFFICIENT CAR

PARKING SYSTEM

FOR FOUR

WHEELER

ABSTRACT NO : M120

VIDEO NO : M120

This project has mainly developed for car parking

system. After bringing the car on the rotating

base, using the pneumatic cylinder the base can be

raised and the car can also be rotated on the

circular parking arrangements with the help of

motor section and ease the parking. The major

components required are Pneumatic cylinder and

Motor with worm gear arrangement.

TRG0

M121

AUTOMATIC BAR

FEEDING

MECHANISM FOR

HACK SAW

MACHINE

ABSTRACT NO : M121

VIDEO NO : M121

This project is used to cut the rod/pipe in uniform

length. This process can be used in the small scale

industries to cut the metal rods. Many industries

like building constructors, manufacturing

industries employ workers to cut the rod by

measuring the length of it. In our project we are

using the machine and sensor to cut the rod with

uniform length this project also helps to reduce

time.



Hyderabad- 500096 Ph 9542878334.

TRG0

M122

SOLAR POWERED

AUTO CHARGING

GRINDING MACHINE

ABSTRACT NO : M122

VIDEO NO : M122

In this concept we have designed the solar

powered grinding machine. The solar powered

automatic grinding machine is useful equipment

for industries Because we are generating the

power from direct sunlight with help of solar

panel. This is the non conventional method we are

using here to run the grinding machine. So this

equipment can save the electric power during

grinding process in industries. Solar panel,

Battery, Motor and Grinding wheel.

TRG0

M123

BOTTLE FILLING

MACHINES USED BY

SMALL TO MEDIUM

SIZED COMPANIES

ABSTRACT NO : M123

VIDEO NO : M123

This analysis deals primarily with lower capacity

bottle filling machines used by small to medium

sized companies and excludes high speed rotary

bottle filling machines typically found only in the

mass market beverage industry. In contrast, the

bottle filling machines discussed here are used

throughout all industries including food, beverage,

chemical, cosmetic and pharmaceutical but at

lower speeds. In fact, most of the market for bottle

filling machines in terms of units sold is for semi

automatic equipment that operates at normal

speed.

TRG0

M124

PEDALING WATER

PUMPING SYSTEM

MACHINE

ABSTRACT NO : M124

VIDEO NO : M124

the pedaling water pumping system machine is a

new innovative concept is mainly used to save

power. In this concept we have designed a pedal

water pumping system. Here we are using the

mechanical energy for pumping the water with out

using any other electrical energy or any other fuel

based energies

TRG0

M125

KINEMATIC

MECHANISMS

ABSTRACT NO : M125

VIDEO NO : M125

Mechanical engineering is not more involved in

robotics since mechatronics and robotics found a

vast application in implementing the concept of

running a robot model using servo motors and

drives, since it needs more amount of energy to

run the robot model. The other thing it requires

more power and initial cost is much higher and

implementation of the concept is bit more difficult

as compared to that of the mechanical concepts. In

order to overcome this, here we are designing the

sex legged walking robot based on kinematic



Hyderabad- 500096 Ph 9542878334.

mechanisms without any controllers.

TRG0

M126

THE SIX LEGGED

WALKING ROBOT

BASED ON

KINEMATIC

MECHANISMS

WITHOUT ANY

CONTROLLERS.

ABSTRACT NO : M126

VIDEO NO : M126





drives, since it needs more amount of energy to

run the robot model. The other thing it requires

more power and initial cost is much higher and




six legged walking robot based on kinematic


TRG0

M127

PEDAL POWER

HACKSAW

ABSTRACT NO : M127

VIDEO NO : M127

Pedal power hacksaw is an Innovative project

which can be used in all residences, offices in

which no specific input power is needed. It consists

of a cycle pedal which is directly connected to the

hacksaw for the processing of cutting the wooden

blocks.

TRG0

M128

A COIN COUNTER

ABSTRACT NO : M128

VIDEO NO : M128

In this project we are designing a coin counter. It

separates the different coin in the various trays by

using funnel and jug method. The operation of

coin separator is performed by dropping the coin

into the funnel and turning the appropriate

diametric hole such that the coin will fall inside.

The coin is held at a Hooper which is fixed to the

top of the tray. The every tray is having different

diameter of holes depends upon the coin diameter

TRG0

M129

MECHANICAL ROTI

MAKER

ABSTRACT NO : M129

VIDEO NO : M129

Mechanical roti maker is the kitchen base project

used for making the round shaped wheat slice

which can be toasted later to make rotis. This is an

innovative project unlike other roti makers where

we have to give mechanical force to make wheat

slice. But here no mechanical force is needed such

that we have to rotate the handle manually.

TRG0

M130

PORTABLE SAW MIL

ABSTRACT NO : M130

VIDEO NO : M130

Portable saw mill is the new concept as the name

implies it can be easily transported to working

areas. This process is fully a mechanical based full

of gear & slider mechanisms



Hyderabad- 500096 Ph 9542878334.

TRG0

M131

AUTOMATIC

STAMPING

MACHINE

ABSTRACT NO : M131

VIDEO NO : M131

In this project we are fabricating automatic

stamping machine which can be useful in post

offices, courier centers and also for industrial

purposes. The main objective of the project is that

developing the project only by mechanical means

and not by using any sensors or transducers. The

project is fabricated by using mechanisms such as

cam and followers, Geneva mechanism, gear

mechanisms, linkages and conveyor with rollers.

TRG0

M132

MECHANICAL

RECLINER

ABSTRACT NO : M132

VIDEO NO : M132

Mechanical Recliner is the innovative project

which is used for aged persons to get up from their

seats without any hesitation. This is also used for

those patients who are having problems in their

knees.

TRG0

M133

FABRICATED THE

GEAR TYPE

INJECTION

MOLDING MACHINE.

ABSTRACT NO : M133

VIDEO NO : M133

Here we have fabricated the gear type injection

molding machine. Its a new innovative concept.

This equipment has been mainly developed for

molding the plastic materials in plastic molding

industries. This equipment is very useful in make

the injection molding process. In this equipment

we are using the rack and pinion, motor, heater

and control unit for making of such operations.

TRG0

M134

FABRICATED THE

AUTOMATIC

DIMENSIONING

MACHINE

ABSTRACT NO : M134

VIDEO NO : M134

Here we have fabricated the automatic

dimensioning machine; it’s a new innovative concept. This machine has been mainly developed

for industrial applications such as used in a quality

control department. This machine is very useful in

measuring the dimension of the specimens. In this

machine we have using the motor and lead screw

for making of such operations. It save the time for

takes the dimension for the specimen in various

industries.

AUTOMOBILE PROJECT



Hyderabad- 500096 Ph 9542878334.

S.NO NAME OF THE

PROJECT


S

-

/-

TRG0

M135

DESIGN AND

FABRICATION OF

PNEUMATIC

TRICYCLE

ABSTRACT NO : M135

VIDEO NO : M135

The objective of this project is to control the vehicle

for handicapped persons using hand. This project is

very useful for physically challenged persons for

using key to move one place to another place. A

wheelchair is a wheeled mobility device in which the

user sits. The device is propelled either manually (by

turning the wheels by the hand) or via various

automated systems. Wheelchairs are used by people

for whom walking is difficult or impossible due to

illness (physical), injury, or disability. We have

designed a project called pneumatic tricycle to

overcome such difficulties.

TRG0

M136

ELECTRICITY

FROM ROAD WITH

KINETIC

ENERGY

ABSTRACT NO : M136

VIDEO NO : M136

Its a power generating device, which can generate the

power whenever the vehicles run on the surface. A

simple method of this is spring system, during the

time of vehicles run over the spring goes up and

down; it helps to rotate the dynamo efficiently. While

the dynamo rotation it generates the electric DC

power, we can store it by battery. Also we can use it

as AC supply with the help of inverter. A system

embedded in a road surface generates power from the

passage of motor vehicles.

TRG0

M137

DESIGN AND

FABRICATION OF

SELF STARTER

ABSTRACT NO : M137

VIDEO NO : M137

In this project we fabricate the self starter for TVS

vehicle. This is a new innovative concept. The manual

starting of TVS required good man power. By

Starting the TVS by manual pedaling the man gets

fatigue so we designed this equipment to easily start

the TVS vehicle. This project is a good innovation in

automobile field and also economical so this project is

well suitable for TVS vehicle, Especially for TVS 50.



Hyderabad- 500096 Ph 9542878334.

TRG0

M138

HYBRID TWO

WHEELER

ABSTRACT NO : M138

VIDEO NO : M138

Here we fabricate a hybrid vehicle model with the

two wheeler front wheel drive with the help of hub

motor. It is operated by the electric power which is

stored in the battery. Here the vehicle will get the

source from two ways one from fuel drive and

another from the electrical drives. The front wheel is

coupled with the electrical drive and the back wheel

to the fuel engines. A Petrol engine or Gasoline engine

is an internal combustion engine with spark-ignition

designed to run on petrol (gasoline) and similar

explosive fuels. In petrol engines, the fuel and air are

pre-mixed before compression stroke. Pre-mixing of

fuel and air allows a petrol engine to run at a much

higher speed than a diesel, but it limits their

compression, and thus efficiency.

TRG0

M139

HYBRID CAR

ABSTRACT NO : M139

VIDEO NO : M139

Here we are fabricating the hybrid car using double

power technology. Nowadays automobile department

where introduce the new technology of vehicle. In this

system we are using the solar power and wind power

to generate the electric power to run our vehicle. In

this vehicle system we are using the electric power

instead of the fuel system.

TRG0

M140

SOLAR OPERATED

HANDICAPPED

WHEEL CHAIR

WITH

TILTING

ARRANGEMENT

ABSTRACT NO : M140

VIDEO NO : M140

Mechanical Recliner is the innovative project which

is used for aged persons to get up from their seats

without any hesitation. This is also used for those

patients who are having problems in their knees.

Electric motor is used to operate the wheel chair. The

power from the sunlight is used to run the motor.

TRG0

M141

SOLAR OPERATED

GOPED VEHICLE

ABSTRACT NO : M141

VIDEO NO : M141

Nowadays petrol and diesel fuel consumption and

cost are very high. So we go in search of alternative

fuel. Alternative fuels save the natural sources.

Electric motor is used to run the vehicle. The power

from the sunlight is used to run the motor. We run

the vehicle with maximum environment friendly and

safety manner. In this solar operated goped vehicle



Hyderabad- 500096 Ph 9542878334.

we have more flexibility and well equipped design

attributes to operate. Control actions are easily

accessible and easily controllable. Mostly goped

vehicle is compact in design and construction.

Mechanical stability and damped device such as

suspension system help it for more cushioning effect

and it has enough degrees of freedom to operate.

TRG0

M142

SOLAR BASED

MODEL TRAIN

ABSTRACT NO : M142

VIDEO NO : M142

In this project we have fabricated the solar based

model train. It is operated through solar power. The

concept is useful to save the electrical energy.

TRG0

M143

SMART

MOTORCYCLE

WHEEL STAND

ABSTRACT NO : M143

VIDEO NO : M143

The Smart motorcycle wheel stand is a motorcycle

front wheel stand with a wheel cradle designed to

automatically adjust within a specific width range to

hold the front tire. This project helps in parking the

vehicle in less specified space.

TRG0

M144

REGENERATIVE

BRAKING SYSTEM

ABSTRACT NO : M144

VIDEO NO : M144

REGENERATIVE BRAKING SYSTEM

TRG0

M145

PNEUMATIC JACK

WITH INDEXING TABLE

FOR AUTOMOBILE

WORSHOP

ABSTRACT NO : M145

VIDEO NO : M145

The main target of project is to fabricate a pneumatic

jack with indexing table for automobile workshops.

This will be more efficient for the user. This machine

is pneumatic powered which has low co-efficient of

friction. A pneumatic cylinder erected provides

power to lift up the Jack. In this arrangement motor

is used for indexing purpose. The main components

used in this project are Pneumatic cylinder, Solenoid

valve, Control circuit, worm gear, rotating table, and

Motor.



Hyderabad- 500096 Ph 9542878334.

TRG0

M146

MULTI LEVEL CAR

PARKING

ABSTRACT NO : M146

VIDEO NO : M146

In this project we have fabricated the multi level car

parking system. This is a new innovative concept. In

this project we are using rope, pulley, motor,

proximity sensors, rack and pinion arrangement,

frames and control unit. Using this equipment we can

easily lift the cars to the required area. This

equipment is very useful for parking the car in

shopping complex, industries and departmental

stores, etc.

TRG0

M147

MOTORIZED GARAGE

LIFT

ABSTRACT NO : M147

VIDEO NO : M147

In this project we are up to produce a Motorised

Garage lift for service stations or workshops to

provide the require tools or to move the components

from one floor to another floor with less movement

and also with less man power. The major components

required in this project are motor with gear

arrangement, roller, rope connected with spring and

lift.

TRG0

M148

MECHANICAL SEED

THRESHER

ABSTRACT NO : M148

VIDEO NO : M148

In this project we design and fabricate a machine for

the purpose of threshing the seeds. In many

industries even now the seeds are separeated

manually. Due to this manual process in industries

there is watage of money and time. In order to avoid

this wastage we have designed the following model

called mechanical seed thresher.this is an advanced

and easy process to separate seeds from the plant. In

this process we do not need any electrical supply to

operate the machine.this model has the following

parts in it.a fan,a slider with separator

arrangement,and a cam arrangement.

TRG0

M149

MECHANICAL HAND

OPERATED EARTH

MOVER

ABSTRACT NO : M149

VIDEO NO : M149

This project is about mechanical hand operated earth

mover. The purpose of this project is to reduce the

electrical usage for machines and also to simplify the

process. It is an effective and cheapest way to operate

earth mover manually. This project consists of a

worm gear arrangement, rack and pinion

arrangement, movable arm, a handle.

TRG0

M150

LOW COST HEAVY

DUTY TRANSPROTING

VEHICLE

ABSTRACT NO : M150

While shifting house, it will be very difficult for the

persons to lift the heavy things to upstairs or to the

downstairs. The heavy household consumables

include grinder, washing machine, refrigerator, big



Hyderabad- 500096 Ph 9542878334.

VIDEO NO : M150

cup boards, air conditioners etc., it requires at least

four to five people to lift it and transfer it to other

places for shifting the houses. So in order to overcome

this problem, we have designed a prototype which

can lift the heavy household items without any

hesitation and with ease. Moreover, only one person

is enough to lift the heavy items either from upstairs

to downstairs or from downstairs to upstairs.

TRG0

M151

GSM BASED VEHICLE

SECURITY AND THIEF

LOCKING

SYSTEM

ABSTRACT NO : M151

VIDEO NO : M151

The Objective of this project is to develop a system to

keep the vehicle secured from the intruders. In cities,

the vehicles are being easily robbed by either

breaking the lock of the vehicle or by inserting

duplicate lock. Hence in order to prevent the robbery

of the vehicle we develop a system called vehicle

security system to protect the vehicle and send SMS

to owner of the vehicle to prevent robbery.

TRG0

M152

FUTURE VEHICLE -

WIND AND SOLAR

ABSTRACT NO : M152

VIDEO NO : M152

Here we are fabricating the hybrid car using double

power technology. Nowadays automobile department

where introduce the new technology of vehicle. In this

system we are using the solar power and wind power

to generate the electric power to run our vehicle. In

this vehicle system we are using the electric power

instead of the fuel system.

TRG0

M153

FUEL VENDING

MACHINE

ABSTRACT NO : M153

VIDEO NO : M153

The objective of this project is to provide easy access

and save time in the FUEL bunk. This project is

made the automated vending machine. The customer

need not wait in the fuel bunk. It reduces the time as

well as man power. This project designed by

following blocks, Control unit, Keypad, Card holding

device, Battery, Pump, and LCD display.

TRG0

M154

FABRICATION OF

SEGWAY- PROTOTYPE

ABSTRACT NO : M154

VIDEO NO : M154

Nowadays petrol and diesel fuel consumption is very

high. So we go in search of alternative fuel. An

alternative fuel saves the natural sources. Electric

motor is used to run the vehicle. We run the vehicle

with maximum environment friendly and safety. In

this SEGWAY model we have more flexibility and

well equipped design attributes to operate. Control

actions are easily accessible. SEGWAY model is

compact in design and construction.



Hyderabad- 500096 Ph 9542878334.

TRG0

M155

ELECTRICAL POWER

GENERATION FROM

SHOCK

ABSORBER

ABSTRACT NO : M155

VIDEO NO : M155

The objective of this project is to generate the electric

power through the fabrication of shock absorber

arrangement. Nowadays power demand is increased,

so this concept is used to generate the electrical power

in order to compensate the electric power demand.

TRG0

M156

CHAINLESS BICYCLE

ABSTRACT NO : M156

VIDEO NO : M156

The objective of this project is “Chainless Bicycle” is a bicycle that transmits power to the driven wheel

through a mechanism other than a metal chain. The

beveled teeth providing such a small point of contact

that they would be unable to take the full leverage of

the crank over a prolonged period but it does offer

some inspiration. This after all is the chief benefit of a

chain the spread load of numerous teeth being driven

at once. It would certainly take up less space in the

bottom bracket in that chainless bicycle. If we revert

to a chain wheel and chain, with the appropriate

constraining rollers, there is no reason at all we could

not have a chain driven system which was completely

enclosed in the chain stay.

TRG0

M157

BUTTON OPERATED

ELECTROMAGNETIC

GEAR CHANGER

FOR TWO WHEELER

ABSTRACT NO : M157

VIDEO NO : M157

The main objective of this concept is to apply the gear

by using automation system in automobiles. This is

the new innovative model mainly used for the vehicles

to control the vehicle. In this project we design the

button operated electromagnetic gear changing

mechanism in two wheeler vehicles by using the

electronic devices. This is very useful for the gear

changing mechanism in automobile vehicles. By using

this we can easily control the vehicle and improve the

performance of the vehicle also we can avoid the wear

and tear of the gear.

TRG0

M158

DESIGN AND

FABRICATION OF BIKE

TREE

ABSTRACT NO : M158

VIDEO NO : M158

Bike Tree, as the name implies it is the peculiar way

of parking bikes and cycles to limit the parking

confusions in busy areas. Now day’s two wheelers are most using vehicle for all peoples, and they get over

traffic while they park and they not having place to

park in the busy area. To avoid the above process we

are using the bike tree. This project consists of the

following parts Chain drive, Motor, Roof, Clamp,



Hyderabad- 500096 Ph 9542878334.

Sensor and Control unit.

TRG0

M159

BATTERY OPERATED

GOPED VEHICLE

ABSTRACT NO :

VIDEO NO :

Nowadays petrol and diesel fuel consumption is very

high. So we go in search of alternative way the

battery is used. Electric motor is used to run the

vehicle. We run the vehicle with maximum

environment friendly and safety. In this goped vehicle

we have more flexibility and well equipped design

attributes to operate. Control actions are easily

accessible and easily controllable. Mostly goped

vehicle is compact in design and construction.

Mechanical stability and damped device such as

suspension system help it for more cushioning effect

and it has enough degrees of freedom to operate.

TRG0

M160

AUTOMATIC

PNEUMATIC PAINT

SPRAYING AND PICK

AND

PLACE ROBOT

ABSTRACT NO : M160

VIDEO NO : M160

The objective of this project is to design robot for

automatic painting purpose. This project is very

useful for painters because in less time they can finish

large number of works in less man power. This

project is designed by following blocks

Microcontroller, servo motor, and driver circuit with

relay, Solenoid valve, DC/AC Motor and sprayer.

TRG0

M161

AUTOMATIC HAND

BRAKE RELEASE

ABSTRACT NO : M161

VIDEO NO : M161

Braking system of the vehicle is most important part;

here we are fabricating the system for parking brake

system. Most of the drivers are not using the parking

brake because of driving tension to avoid the problem

we are using the automatic hand brake release

system.

v

TRG0

M162

AUTOMATIC

ACCELERATION

CONTROL IN TRAFFIC

SIGNAL

ABSTRACT NO : M162

VIDEO NO : M162

Our project is to design an automatic acceleration

control in traffic signal. The set up of the model does

not allow violating the traffic rules. The Speed cannot

be increased in the signals. This model consists of a

motor with rack and pinion arrangement, limit

switches and the accelerator.



Hyderabad- 500096 Ph 9542878334.

TRG0

M163

AUTOMATIC AC ON

AND OFF SYSTEM IN

CARS

ABSTRACT NO : M163

VIDEO NO : M163

Objective of this project is whenever the temperature

exceeds particular limit automatically AC will turn

ON/OFF. Whenever temperature value exceeds the

set value automatically AC turns ON/OFF. The

temperature value is set with help of Keypad. This

project mainly used in cars, shopping malls, bus,

home etc.,

TRG0

M164

AUTO HEAD LAMP

ALIGNMENT SYSTEM

FOR AUTOMOBILE

ABSTRACT NO : M164

VIDEO NO : M164

A head lamp auto-leveling system can be used

inexpensively and for a long term by reducing the

unpleasant feeling in the driver. An implementation

of the head-lamp leveling system includes head lamps

whose axis is tilted horizontally / vertically with

respect to a vehicle turning movement.

TRG0

M165

90 DEGREE CAR

PARKING MODEL

ABSTRACT NO : M165

VIDEO NO : M165

Here we fabricate the model for 90 degree car

parking system for automobiles. It is nothing but the

steering control with four wheel drive. It is a new

innovative concept which is mainly used for four

wheeler vehicles. Four-wheel steering is a system

employed by some vehicles to improve steering

response, increase vehicle stability while maneuvering

at high speed, or to turn at low radius at low speed. In

most active four-wheel steering systems, the rear

wheels are steered by a controller and actuators. This

allows the vehicle to turn in a significantly smaller

radius, sometimes critical for large trucks or tractors

and vehicles with trailers. So we are introducing

small model of four wheeler steering control through

this project

TRG0

M166

AUTOMATIC GEAR

CHANGER IN TWO

WHEELERS - DC GUN

MODEL

ABSTRACT NO : M166

VIDEO NO : M166

The main objective of this concept is used to apply the

gear by using automation system in automobiles. This

is the new innovative model mainly used for the

vehicles to control the vehicle. In this project we

design the automatic gear changing mechanism in

two wheeler vehicles by using the electronic devices.

This is very useful for the gear changing mechanism

in automobile vehicles. By using this we can easily

control the vehicle and improve the performance of

the vehicle also we can avoid the wear and tear of the



Hyderabad- 500096 Ph 9542878334.

gear.

TRG0

M167

ELECTRICAL POWER

GENERATION FROM

RAILWAY TRACK

ABSTRACT NO : M167

VIDEO NO : M167

The main aim of the concept is to utilize the train

crossing time in a railway track. The power is

produced by the railway track power generation

equipment. A simple method of this is spring system

during the time of vehicles run over the spring goes

up and down; it helps to rotate the dynamo

efficiently. While the dynamo rotation it generates the

electric DC power, we can store it by battery. Also we

can use it as AC supply with the help of inverter.

TRG0

M168

SOLAR POWERED

VOICE CONTROLLED

VEHICLE

ABSTRACT NO : M168

VIDEO NO : M168

The objective of this project is to control the vehicle

robot through voice. This project is very useful in

dangerous material handling industries. Such as

crackers manufacturing company in which easily

flammable materials are handled by this robot. So

human can be in the safety place and operate the

vehicle robot through voice signal. This project is

designed with Microcontroller, Solar panel with

battery, Microphone, Amplifier, Signal conditioning

unit, Driver circuits along with motor and Robot

model.

TRG0

M169

SOLAR OPERATED JIB

CRANE MECHANISM

ABSTRACT NO : M169

VIDEO NO : M169

This system is mainly used for industrial field. If

they want to burry a well, they need so many

members to do that job. But if they use this crane

system, only few persons are enough to do that

work. The reason is it can take up all the stones or

any other related materials from one place to

another place by single crane operator. What the

benefit appear here means, manpower is totally

reduced. It not only helps in this field, but also can

use in industrial purpose for robotic based jobs.

TRG0

M170

SOLAR BASED LINE

TRACKING VEHICLE

ABSTRACT NO : M170

VIDEO NO : M170

Line follower is a machine that can follow a path.

The path can be visible like a black line on a white

surface (or vice-versa) or it can be invisible like a

magnetic field. In this project a vehicle or a robot

can guided by two sensors, which is used to detect

the desired path of the robot. This process is control



Hyderabad- 500096 Ph 9542878334.

by solar energy system.

TRG0

M171

SOLAR OPERATED

RAILWAY GATE

CONTROL

ABSTRACT NO : M171

VIDEO NO : M171

In our country everyday we are hearing about the

accidents in the level crossing. That may end the

human’s life. To prevent the accident we plan to go for the automatic railway gate controller for the

unmanned level crossing. This project is helpful for

railway system for open the gate whenever comes

near of that. The train, which is coming in either

way, will be sensed by the proximity sensors.

TRG0

M172

SOLAR BASED TRAFFIC

CONTROL SYSTEM

ABSTRACT NO : M172

VIDEO NO : M172

The objective of this project is to control the traffic

signal with help of solar energy. This project has

been developed as a model of Traffic light

controller. The signals can be controlled through

software programs and can be varied depending

upon the location. For example some places needs

green signal to glow for long time. And some

directions need red signals to glow for long time.

This can be achieved simply by varying the delay in

the software. Solar power is used to provide the

power to the solar lights. So this project is very

useful to the government to save the power.

TRG0

M173

MOBILE CHARGER

FROM TREAD MILL

ABSTRACT NO : M173

VIDEO NO : M173

In this project we fabricate the mobile charger from

treadmill. This is a new innovative concept. A

treadmill is gym equipment which is used for

jogging and walking purposes. The machine

provides a moving platform with a wide Conveyor

belt and an electric motor or a flywheel. By using

this concept we can easily produce the electrical

power. So this project is a good innovation for

producing the electric current for mobile as well as

to solve the future demand also. The project consists

of the following parts motor, dynamo, belt, support

frames, battery, control unit and a mobile Charger.

TRG0

M174

H-TYPE CAR PARKING

SYSTEM

ABSTRACT NO : M174

VIDEO NO : M174

This project has mainly developed for car parking

system. After bringing the car on the lifting

platform, using the pneumatic cylinder the base can

be raised and the car can also be rotated on the

circular parking arrangements with the help of

motor section and ease the parking. The major



Hyderabad- 500096 Ph 9542878334.

components required are Pneumatic cylinder,

solenoid valve and control unit.

TRG0

M175

FABRICATION OF FOUR

WHEEL STEERING

ABSTRACT NO : M175

VIDEO NO : M175

The four wheel steering controlled vehicle is a new

innovative concept which is mainly used for four

wheeler vehicles. Four-wheel steering (or all wheel

steering) is a system employed by some vehicles to

improve steering response, increase vehicle stability

while maneuvering at high speed, or to decrease

turning radius at low speed. In most active four-

wheel steering systems, the rear wheels are steered

by a controller and actuators. This allows the

vehicle to turn in a significantly smaller radius,

sometimes critical for large trucks or tractors and

vehicles with trailers. So we are introducing small

model of four wheeler steering control through this

project. The project consists of the following parts

rack and pinion gear

TRG0

M176

ABSTRACT NO : M176

VIDEO NO : M176

TRG0

M177

ABSTRACT NO : M177

VIDEO NO : M177

TRG0

M178

A NOVEL VEHICLE

SAFETY MODEL :

VEHICLE SPEED

CONTROLLER UNDER

DRIVER FATIGUE

ABSTRACT NO : M178

VIDEO NO : M178

Driver fatigue resulting from sleep deprivation or

sleep disorders is an important factor in the

creasing number of accidents on todays roads. In

this paper, we describe a real-time online safety

prototype that controls the vehicle speed under

driver fatigue. The purpose of such a model is to

advance a system to detect fatigue symptoms in

drivers and control the speed of vehicle to avoid

accidents. The main components of the system

consists of a eye blink sensor for driver fatigue

detection, and an adaptive speed controller

providing precise positioning of the throttle valve to

control speed of vehicle.

TRG0

M179

FABRICATION OF

AUTOMATIC VEHICLE

OVER SPEED

The Objective of this project is to detect the speed of

the vehicle and cutoff the fuel if it exceeds the speed

limit. This project is also used to avoid accidents



Hyderabad- 500096 Ph 9542878334.

CONTROLLING

SYSTEM FOR SCHOOL

ZONE

ABSTRACT NO : M179

VIDEO NO : M179

because of over speed. The concept has a motor to

operate the valve.

TRG0

M180

HAND OPERATED

ELECTROMAGNETIC

CLUTCH FOR FOUR

WHEELER

ABSTRACT NO : M180

VIDEO NO : M180

The objective of the project is to develop a hand

operated clutch system which can be useful for

handicapped persons while driving the four

wheelers. This project is mainly used in Vehicles

either two or four wheelers. If this project is used in

real time we can avoid so many accidents.

TRG0

M181

AUTOMATIC GEAR

CHANGER IN TWO

WHEELERS -

PNEUMATIC MODEL

ABSTRACT NO : M181

VIDEO NO : M181

The main objective of this concept is used to apply

the gear by using automation system in automobile

vehicles. This is the new innovative model mainly

used for the vehicles to control the vehicle. Here we

are concentrating to design the automatic gear

changing mechanism in two wheeler vehicles by

using the electronic devices. This is very useful for

the gear changing mechanism in automobile

vehicles. By using this we can easily control the

vehicle and improve the performance of the vehicle

also we can avoid the wear and tear of the gear.

THERMAL BASED PROJECTS

S.NO NAME OF THE

PROJECT

PROJECTS DESCRIPTION RS

RS

TRG0M182 Fabrication of thermo-electric solar air conditioner

TRG0M183 Water Cooler cum Air Conditioner

TRG0M184 Fabrication of thermo-electric refrigerator



Hyderabad- 500096 Ph 9542878334.

TRG0M185 Transformer heat reduction system

TRG0M186 Fabrication of furnace using infrared Lamp

TRG0M187 Water cooler cum Water heater by using refrigeration System

TRG0M188 Remote controlled boiler flame adjustment system

TRG0M189 Fabrication of Automatic temperature controller with cooling

system

TRG0M190 Fabrication of Hot and Cold Water Dispenser

TRG0M191 Fabrication of Solar air conditioning Machine

TRG0M192 Waste chill recovery heat exchanger

TRG0M193 Fabrication of Solar Air Conditioner

TRG0M194 Fabrication of Mist Coolant system

TRG0M195 Automatic Electro-plating coating process

TRG0M196 Fabrication of Solar Water Heater by using parabolic collector

TRG0M197 Electrical Power Generation using Thermal Power Plant

TRG0M198 Fabrication of Solar refrigeration system

TRG0M199 Fabrication of Bottle Cooler

TRG0M100 Fabrication of Solar Kettle (or) Solar Parabolic Collector

TRG0M200 Fabrication of Solar Air Cooler

TRG0M201 Fabrication of Mini Water Heater

TRG0M202 Solar Water Purification by using thermal method

TRG0M203 Fabrication of Micro Wave Oven

TRG0M204 Fabrication of Miniature Boiler

TRG0M205 Fabrication of Solar Air Dryer

TRG0M206 Fabrication of double effecting solar cooker

TRG0M207 Fabrication of Solar Air Cooler cum Heater

TRG0M208 Fabrication of solar Water Heater

TRG0M209 Fabrication of double reflection solar Cooker

ROBOTIC PROJECTS



Hyderabad- 500096 Ph 9542878334.

S.NO NAME OF THE

PROJECT


TRG0

M210

FABRICATED

NEW TYPE OF

ROBOT FOR PIPE

LINES. THE MAIN

AIM OF THIS

CONCEPT IS USED

TO AUTOMATE

THE PIPE LINE

CHECKING.

ABSTRACT NO : M210

VIDEO NO : M210

Here we have fabricated new type of robot for pipe

lines. The main aim of this concept is used to

automate the pipe line checking. Many oil industries

are using the ladder or crane for checking over the

pipe lines. It may be very risky and manual fault

may occur, to avoid this problem we are going for

the automatic checking system with help of robot.

The project is made up of simple arrangements. We

can easily fix the robot on the pipe line. The camera

captures the video of the pipe accordingly and

detects the hole. This equipment has less

maintenance. The project consist the following

parts, Motor, Wheels, spring arrangement, Battery

and Control unit.

TRG0

M211

AUTOMATIC

TOILET

CLEANING

ROBOT

ABSTRACT NO : M211

VIDEO NO : M211

Our project model is one of the effective and quick

ways to clean the toilet basins. The aim of our

project is to reduce human effort. The project

model consists of dc motor, cleaning brush and

pneumatic cylinder.



Hyderabad- 500096 Ph 9542878334.

TRG0

M212

SUPERVISOR

ROBOT FOR

INDUSTRIES

ABSTRACT NO : M212

VIDEO NO : M212

The problem of determination is accessible region of

a robot working in industry. This problem appears

in the case of introducing a robot or a number of

robots in an existing manufacturing system. An

additional problem is raised when investigating the

above and has to be solved. For each serviced

location the robot has to rotate in desired location.

The main objective of this project is to reduce the

human fatigue and also to reduce the man power

and to observe the workers. Here we have

fabricated the supervisor robo for industrial

environment. It’s a new innovative concept. This equipment has been mainly developed for

supervising the industrial machines and workers to

identify the workers whether they are in their places

or not. To avoid the human fatigue and to reduce

the man power here we are using the crane and

proximity sensor with arrangement of camera, and

we fixing the limit switch which is placed under the

pad placed near the machine. This equipment is

very useful in all industries.

TRG0

M213

LEAKAGE

DETECTING

ROBOT FOR OIL

PIPE LINES

ABSTRACT NO : M213

VIDEO NO : M213

Here we have fabricated new type of robot for pipe

lines. The main aim of this concept is used to

automate the pipe line checking. Many oil industries

are using the ladder or crane for checking over the

pipe lines. It may be very risky and manual fault

may occur, to avoid this problem we are going for

the automatic checking system with help of robot.

The project is made up of simple arrangements. We

can easily fix the robot on the pipe line. The camera

captures the video of the pipe accordingly and

detects the hole. This equipment has less

maintenance. The project consist the following

parts, Motor, Wheels, spring arrangement, remote

and control unit.

TRG0

M214

AUTOMATIC X-Y

TABLE FOR

MACHINING

PURPOSE

Main aim of our project is to design a sliding table

for the grinding machine and other applications in

order to prevent injuries. Manually if the object to

be processed is placed on the palm and is allowed to

undergo any action then it may cause injury to the



Hyderabad- 500096 Ph 9542878334.

ABSTRACT NO : M214

VIDEO NO : M214

hands if we are careless. Hence in order to avoid the

injuries and as a step of precaution the sliding table

is introduced and designed. The X-Y Model is a

mechanical Model. It consists of two motors in the X

and Y axis

TRG0

M215

MECHANICAL

WALKING ROBOT

WITH SINGLE

MOTOR

ABSTRACT NO : M215

VIDEO NO : M215

In this project we fabricate a mobile robot with only

mechanical links for its movement. Our model has

only two legs. This project is mainly designed to

meet the requirements of the robot, where wheels

cannot be used. The major components used in this

project are DC motor, control unit and mechanical

links.

TRG0

M216

FLOOR MOPPING

ROBOT

ABSTRACT NO : M216

VIDEO NO : M216

Floor mopping robot is specially designed for the

home appliances for the purpose of floor cleaning.

Anybody can operate this machine easily. It consists

of brush and this brush is used to clean the floor

dust and the sponge arrangement for removing of

cleaning water from the floor. Hence it is very

useful to the hospitals and houses etc. The time

taken for cleaning is very less and cost is also very

less. In our project it is a very simple drive

mechanism and easy to operate by any person and

children. The size of the machine is also portable so

we can transfer from one place to other place very

easily.

TRG0

M217

AUTOMATIC

PNEUMATIC

SCRAP DISPOSING

ROBOT

ABSTRACT NO : M217

VIDEO NO : M217

The present invention provides an automatic guided

system for transferring scrap resulted from at least

one scrap source of a clean room to a scrap exit. The

automatic guided system for transferring the scrap

includes a rail module and a vehicle module. The

rail module connects a first predetermined location

to a second predetermined location. The first

predetermined location is a garage for providing the

vehicle module to await an order or a collecting

workstation for treating the scrap material resulted

from the scrap source. The second predetermined

location is a scrap exit for providing the vehicle

module to dump the scrap material resulted from

the scrap source or a collecting workstation for



Hyderabad- 500096 Ph 9542878334.

treating the scrap material resulted from the scrap

source. The vehicle module is disposed and moved

along the rail module for transferring the scrap

glass from the scrap glass source to the scrap exit.

TRG0

M218

WIRELESS

CONTROLLED

TANKER FOR

MILITARY

ABSTRACT NO : M218

VIDEO NO : M218

This project is to design a robot with dc gun, laser

gun and camera. This project is very much useful in

military applications. This is very useful to detect

the object and shoot at a particular time.

TRG0

M219

MATERIAL

DIMENSION

MEASUREMENT

ROBOT

ABSTRACT NO : M219

VIDEO NO : M219

The main aim of this concept is used to optimize the

measuring the height of work piece. Normally we

will use plug gauges to measure the components.

Instead of using manual inspection here we are

introducing the automatic system by using the

pneumatic comparators. The manual inspection is

not full of efficient so we need some improvement in

this measuring device. In this device the dimensions

are calculated by using this comparator setup.

TRG0

M220

TOUCH SCREEN

CONTROLLED

INTELLIGENT

ROBOT

ABSTRACT NO : M220

VIDEO NO : M220

The objective of this project is to control Robot

movement and direction for an application as per

the instruction given to microcontroller through

touch screen. This project is useful for the industrial

controlled application. This project is designed with

Microcontroller, Driver Circuits along with Motors,

Robot Model, and touch screen.

TRG0

M221

BOMB

DETECTING AND

CLEARING

ROBOT WITH

WIRELESS

CAMERA

ABSTRACT NO : M221

VIDEO NO : M221

The objective of this project is to operate the robot

for detecting the bombs and clearing it with the help

of wireless camera. This project is very useful in

military applications for detecting and clearing the

bombs. This project also improves the security

performance. This project is designed with micro

controller, antenna, bomb detector, driver circuits,

dc motors, servo motors , camera and pick & place

robot model.



Hyderabad- 500096 Ph 9542878334.

TRG0

M222

MULTIPLE

INTERFACE

BASED FIRE

FIGHTING ROBOT

ABSTRACT NO : M222

VIDEO NO : M222

The main objective of this robot is to find the place

where fire is there and needs to be put down. This is

useful for many Industries where fire detection is

required and need to put down without human

intervention. In our Multiple Interface fire fighting

robot, we will be having a moving robot with a

water tank, DC pump, RF receiver and a layout

path defined for its movement. The RF transmitters

will be placed in the rooms where possibility of fire

is there

TRG0

M223

AUTOMATED

VEHICLE FOR

PHYSICALLY AND

VISUALLY

CHALLENGED

ABSTRACT NO : M223

VIDEO NO : M223

In this project the robot is interfaced with GPS,

using GPS the robot sends its location to speaker.

This project will be very helpful to the physically

challenged and visually challenged people hence it

announces the corresponding area through speaker.

TRG0

M224

LPG DETECTION

ROBOT FOR

ATOMIC POWER

STATION

ABSTRACT NO : M224

VIDEO NO : M224

The main objective of this project is to detect the

LPG leakage by gas sensor and it makes the alarm

while gas detection. Atomic power station is a very

sensitive area and hence leakage of LPG needs to be

known in order to avoid accidents and hence

radiation hazards in the surrounding area. The

system is designed and developed, in order to

prevent the accident in atomic power station. In our

LPG gas leakage protection system, we will be

having LPG gas sensor, Amplifiers, Comparator

and Alarm.

TRG0

M225

MATERIAL

HANDING ROBOT

FOR MULTI

STATIONS

In our project we have designed material handling

robot for multi stations. Material handling robot for

multi stations is a mobile robot used in industrial

applications to move materials around a

manufacturing area or a warehouse. Proximity



Hyderabad- 500096 Ph 9542878334.

ABSTRACT NO : M225

VIDEO NO : M225

Sensor, DC Motor, Wheel and Material handling

vehicle are the main blocks in this project.

TRG0

M226

REMOTE

CONTROLLED

ROBOT FOR

WATER

SPLASHING IN

GARDENING

ABSTRACT NO : M226

VIDEO NO : M226

The objective of this project is to control the robot

for water splashing in gardening application

remotely. This project is mostly used in gardening

purpose where entire robot operation is to be

controlled remotely. So we can control the robot to

a long distance.

TRG0

M227

PNEUMATIC PICK

AND PLACE

ROBOT

ABSTRACT NO : M227

VIDEO NO :

M227

The objective of this project is to design the pick

and place robot for material handling. Really we

can use this concept in many mechanical industries,

chemical industries for material handling of the

machined components. By using this equipment we

can reduce the human fatigue and save the work

time. This concept is useful in the industrial

companies for pick and place application. Mainly

used for precious material handling application. It

is fully operated under pneumatic power.

Pneumatic cylinder, Solenoid valve, pneumatic

rotor, gripper and gear arrangement are the main

blocks used here.

TRG0

M228

KINEMATIC

WALKING ROBOT

ABSTRACT NO : M228

VIDEO NO :

M228





drives, since it needs more amount of energy to run

the robot model. The other thing it requires more

power and initial cost is much higher and




six legged walking robot based on kinematic



Hyderabad- 500096 Ph 9542878334.


TRG0

M229

OBJECT SENSING

AND PICK AND

PLACE ROBOT

ABSTRACT NO : M229

VIDEO NO : M229

The objective of this project is to design the object

sensing robot for pick and place application. This

project is used in the industries for pick and place

application. Mainly used for precious material

handling application. This project is designed by

following blocks, Microcontroller, Object sensor,

Signal conditioning unit, Driver circuit, Motor,

Robot pick and place model.

COMPLETE MECHANICAL PROJECTS

(WITH OUT ELECTRONICS)

S.NO NAME OF THE

PROJECT


TRG0

M230

WIND AND WATER

PUMIINGDEVELOPMENT

AND DISSEMINATION :

ABSTRACT NO : M230

VIDEO NO : M230

The main objective of wind water pump

development and dissemination project is to

improve and refine two models of wind pump

and copy 6 wind pumps from the prototype

models for dissemination to farmers in country

wide through training course, installation a long

major national roads and workshop. The project

contributed to rural agricultural development.

TRG0 GENERAL WORKING OF

LATHE MACHINE: The lathe machine is working by the following

important parts electric motor, cone pulley,



Hyderabad- 500096 Ph 9542878334.

M231

ABSTRACT NO : M231

VIDEO NO : M231

tumbler gear, back gear system, gear box, head

stock, tail stock, carriage, live centre, dead

centre, belt, lead screw, feed rod, tool post,

spanner, face plate, catch plate, apron, bed, half

nut, step cone pulley system, and centre rest.

TRG0

M232

SAFETY ELEVATOR

ABSTRACT NO : M232

VIDEO NO : M232

Elevators incorporate several safety features to

prevent the car from crashing into the bottom of

the shaft. Safeties installed on the car can

prevent this type of accident from occurring

when the machine brake fails or the wire ropes

suspending the car break. However, the inherent

design of the safeties render them inoperative in

the ascending direction

TRG0

M233

REGENERATIVE

BRAKING SYSTEM:

ABSTRACT NO : M233

VIDEO NO : M233

A regenerative brake is an energy recovery

mechanism which slows a vehicle or object down

by converting its kinetic energy into another

form, which can be either used immediately or

stored until needed. This contrasts with

conventional braking systems, where the excess

kinetic energy is converted to heat by friction in

the brake linings and therefore wasted.

TRG0

M234

WIND POWER

GENERATION SYSTEM

ABSTRACT NO : M234

VIDEO NO : M234

Families living in rural areas who do not have

access to the national grid may have to travel

long distances and wait long times for their

batteries to be recharged at commercial

centres.practical action has developed reliable

and cost effective wind energy systems for

charging batteries to help meet the electrical

energy needs of these people. Small scale wind

energy generators also have the potential to

stimulate village-level charging enterprises for

either community or private use. Therefore

practical action aims to develop and promote

local industries capable of manufacturing and

maintaining the generators.

TRG0

M235

ELECTRICAL ENERGY

FROM SPEED BREAKER:

ABSTRACT NO : M235

This can be designed to generate electrical

energy when vehicles cross the breaker and roll

http://en.wikipedia.org/wiki/Energy_recovery

http://en.wikipedia.org/wiki/Kinetic_energy

http://en.wikipedia.org/wiki/Brake_linings



Hyderabad- 500096 Ph 9542878334.

VIDEO NO : M235

the roller based speed breakers connected with

an alternator.

INNOVATIVE MECHANICAL PROJECTS.

MWT106 Compressed-Air

Engine For Four

Wheeler

ABSTRACT NO :

VIDEO NO :

How could it be possible to run on air? Consider the physical work

that compressed air already does to make our everyday lives easier.

Mechanics rely on air-driven pneumatic tools every day to turn nuts

and bolts with authority in garages around the world. Pneumatic

tools are powerful, even at a relatively low pounds per-square-inch

(psi) pressure setting. They can free rusted-on lug nuts and separate

metal from metal through an air hammer or pneumatic chisel.

Crank the pressure up and compressed air is a force to be reckoned

with, providing enough power to even propel a wheel driven car.

MWT107 Auto Clutch For

Automobile

ABSTRACT NO :

VIDEO NO :

Now the project has mainly concentrated on a suitable electronic

control unit has been designed for automatic clutch. The fabrication

part of it has been considered with almost case for its simplicity and

economy, such that this can be accommodated as one of the

essential tools on automobile garages. In our project, the switch is

fixed below the braking pedal of the four wheeler. The solenoid

valve with pneumatic cylinder mechanism is used to

pushing/pulling of the clutch automatically, when the braking pedal

is pressed.

MWT108 ELECTRIC CAR

ABSTRACT NO :

VIDEO NO :

The working principle of Electric Electric car basically involves

two process, The first process Battery to be charged one The

second process involves when the vehicle is running by means of

an electric motor which drowns power from already storage battery.

The vehicle is driven by means of a motor. The power to run the

motor is supplied from the battery, as the battery is already charged

by the Electric panel power.

During this process the speed of the vehicle will be less and there is

no smog forming pollutants produced during the vehicle runs. The

vehicle is powered by means of electric motor the Electric panel

also charging the battery. The mileage of the vehicle while running

on the electric motor is mainly depends upon the time of charging

and also depends upon the capacity of the battery. The vehicle

serves as a motor when the vehicle is running by means of battery.

MWT109 Electric two wheeler

with Rechargeable

battery

ABSTRACT NO :

The working principle of the system starts with the battery

connections. In battery there are two terminals. One is the positive

terminal and another one is the negative terminal. The positive

terminal is connected to the stator body of the motor. The negative

terminal is connected to the frame of the vehicle as the earth. The

motor and battery were connected in series. The wire connections



Hyderabad- 500096 Ph 9542878334.

VIDEO NO :

were made for the flow of electrons from one part to another part.

When the motor energise through the current, the stator field coil

gets magnetized and induces the rotor shaft to rotate in the counter

clockwise direction. At the end of the motor shaft relevant

conditions were made for the seating of clutch assembly. Clutch is

a power transmission device, which gives drive to the rear wheel.

The clutch assembly is seated with the rotor shaft through needle

bearings. On the other end of the rotor shaft an alternator is fixed

for the recharging system, as it is an electrical device which

converts the rotational force into the electromotive force. This

alternator is applied to recharge the battery while the vehicle is in

motion. This arrangement is done through V-belt pulley.

MWT110 Electrical Power

Generation Using

Foot Step

ABSTRACT NO :

VIDEO NO :

The complete diagram of the foot step power generation is

given below. Only one step is inclined in certain small angle

which is used to generate the power. The pushing power is

converted into electrical energy by proper driving

arrangement. The rack & pinion, spring arrangement is fixed

at the inclined step. The spring is used to return the inclined

step in same position by releasing the load. The pinion shaft

is connected to the supporter by end bearings as shown in

fig. The larger sprocket also coupled with the pinion shaft, so

that it is running the same speed of pinion. The larger

sprocket is coupled to the small cycle sprocket with the help

of chain (cycle). This larger sprocket is used to transfer the

rotation force to the smaller sprocket. The smaller sprocket is

running same direction for the forward and reverse direction

of rotational movement of the larger sprocket. This action

locks like a cycle pedaling action.

MWT111 Electrical Power

Generation Using

Shock Absorber

ABSTRACT NO :

VIDEO NO :

The complete diagram of the power generation using shock

absorber is given below. The vehicle running time the shock

absorber piston is moving up and down motion. This

movement is converted to the electrical energy by using Rack

and pinion arrangement. The rack & pinion is fixed at the

shock absorber which is mounded bellow the L-angle

window. The pinion shaft is connected to the supporter by

end bearings as shown in fig. The larger sprocket also coupled

with the pinion shaft, so that it is running the same speed of

pinion. The larger sprocket is coupled to the small cycle

sprocket with the help of chain (cycle). This larger sprocket is

used to transfer the rotation force to the smaller sprocket.

The smaller sprocket is running same direction for the

forward and reverse direction of rotational movement of the



Hyderabad- 500096 Ph 9542878334.

larger sprocket. This action locks like a cycle pedaling action.

The fly wheel and gear wheel is also coupled to the smaller

sprocket shaft. The flywheel is used to increase the rpm of

the smaller sprocket shaft. The gear wheel is coupled to the

generator shaft with the help of another gear wheel. The

generator is used here, is permanent magnet D.C generator.

The generated voltage is 12Volt D.C. This D.C voltage is

stored to the Lead-acid 12 Volt battery. The battery is

connected to the LED lights.

MWT112 Electrical power

generation

Using speed breaker

ABSTRACT NO :

VIDEO NO :

The complete diagram of the power generation using speed

brake is given below. L-angle window is inclined in certain

small angle which is used to generate the power. The pushing

power is converted into electrical energy by proper driving

arrangement. The rack & pinion, spring arrangement is fixed

at the speed brake which is mounded bellow the L-angle

window. The spring is used to return the inclined L-angle

window in same position by releasing the load. The pinion

shaft is connected to the supporter by end bearings as shown

in fig. The larger sprocket also coupled with the pinion shaft,

so that it is running the same speed of pinion. The larger

sprocket is coupled to the small cycle sprocket with the help

of chain (cycle). This larger sprocket is used to transfer the

rotation force to the smaller sprocket. The smaller sprocket is

running same direction for the forward and reverse direction

of rotational movement of the larger sprocket. This action

locks like a cycle pedaling action. The fly wheel and gear

wheel is also coupled to the smaller sprocket shaft. The

flywheel is used to increase the rpm of the smaller sprocket

shaft. The gear wheel is coupled to the generator shaft with

the help of another gear wheel. The generator is used here, is

permanent magnet D.C generator. The generated voltage is

12Volt D.C. This D.C voltage is stored to the Lead-acid 12 Volt

battery. The battery is connected to the inverter. This

inverter is used to convert the 12 Volt D.C to the 230 Volt

A.C. This working principle is already explained the above

chapter. This 230 Volt A.C voltage is used to activate the light,

fan and etc. By increasing the capacity of battery and inverter

circuit, the power rating is increased. This arrangement is

fitted in highways; the complete arrangement is kept inside

the floor level except the speed brake arrangement.



Hyderabad- 500096 Ph 9542878334.

MWT113 Electricity and water

pumping system

Using wind mill

ABSTRACT NO :

VIDEO NO :

Aero turbines convert wind energy into rotary mechanical

energy. A mechanical interface, consisting of a step-up gear

and a suitable coupling transmits the energy to an electrical

generator. The output of this generator is connected to the

Battery or system grid. The battery is connected to the

inverter. The inverter is used to convert DC voltages to AC

voltages. The load is drawn current from the inverter. Gear

box is the main components of the wind mill. In our project

main shaft is also connected to the pump which is drawn

water from the ground level. Gear box consist of Generator

Mains haft with Leafs Gear Wheel Arrangement Wind power

ratings can be divided into three convenient grouping, small

to 1kW, medium to 50 kW and large 200 kW to megawatt

frame size.

MWT114 Mechanical Grass

Cutter Machine

(Using Bevel Gears

Arrangement)

ABSTRACT NO :

VIDEO NO :

A MECHANICAL GRASS CUTTER is a machine that uses

revolving blades to cut a lawn at an even length. Even more

sophisticated devices are there in every field. Power

consumption becomes essential for future. MECHANICAL

GRASS CUTTER is a very useful device which is very simple in

construction. It is used to maintain and upkeep lawns in

gardens, schools, college’s part etc. We have made some

changes in the existing machine to make its application easier

at reduced cost. Our main aim in pollution control is attained

through this. Unskilled operation can operate easily and

maintain the lawn very fine and uniform surface look.

MWT115 HYBRID VEHICLE

ABSTRACT NO :

VIDEO NO :

The working principle of hybrid vehicle basically involves

two processes, the first process involves when the vehicle

is running by means of internal combustion engine and the

second process involves when the vehicle is running by

means of an electric motor. When the vehicle is driven at

the outside of city the vehicle is powered by means of

internal combustion engines. The power from the engine is

taken from the pulley and then it rotates the wheel. During

this process the vehicle is charged by means of a generator

used. The power is generated through generator is by

connecting the generator shaft with the shaft of the wheel

by means of V-Belt. When the vehicle is driven inside the

http://en.wikipedia.org/wiki/Machine

http://en.wikipedia.org/wiki/Lawn



Hyderabad- 500096 Ph 9542878334.

city, the vehicle is powered by means of a motor. The

power to run the motor is supplied from the battery, as the

battery is already charged when the vehicle running on the

internal combustion engine. During this process the speed

of the vehicle will be minimum and there is no smog

forming pollutants produced during the vehicle runs. When

the vehicle is powered by means of electric motor the

power from the internal combustion engine will be

disconnected from the shaft by loosening the belt. The

mileage of the vehicle while running on the electric motor

is mainly depends upon the time of charging and also

depends upon the capacity of the battery.

MWT116

HYDRO POWER

PLANT

ABSTRACT NO :

VIDEO NO :

The block diagram of hydro power plant is consisting of a

water tank, 12 voltage batteries, an inverter and a florescent

lamp. As we studied from the generator gives a D.C. output

of 12V this D.C. output is not always constant there is some

variation in this D.C. output this cannot be given to the battery

storage it may weaken the life of the battery. So in order to

get constant D.C. output and also to avoid the reverse flow of

current to the panel in the case of no load a charge controller

have been used this help us to allow only the constant voltage

of 12V D.C. to the battery and also it act as an blocking diode

and protect the motor principle.By this way the battery gets

charged then this D.C. storage is given to an inverter this

inverter inverts 12V D.C. to input in to AC output, step upped

in to 230V.The 230V AC supply is given to the supply t -

phase supply.

MWT117 MOTORIZED WHEEL

CHAIR

ABSTRACT NO :

VIDEO NO :

The advanced wheel chair for handicapped consists of one set

of spur gear. This one set is takes power from the motor shaft.

And this is used for giving power to main shaft of the chair.

A motor which is coupled with the spur gear and it is runs at a

maximum speed of 1440 rpm. Say for example a handicapped

person want move a certain distance for taking some books

from the self or he wants to take some dresses from the self.

The time for moving should not be much more time. Then

only he can work as fast as fast as he or she think. When he

wants to move from one place to the other we can make a set

up which helps by switch on and off and we can set up a

drive.



Hyderabad- 500096 Ph 9542878334.

MWT118 MULTI PROCESS

CUTTER

ABSTRACT NO :

VIDEO NO :

The multi-purpose cutting machine is provided with a “V” pulley of C.I. Slider having belt drive. This pulley is

connected to the motor by a ‘V’ belt. When the motor is started, the main shaft of the cutter also starts revolving at the

same speed. The running speed is 1440 R.P.M. The rotation

will be of vertical direction because of cam mechanism. The

main shaft drives the horizontal shaft. The speed is also

reduced in the ratio of 1: 12. When the main shaft rotates 12

times the horizontal shaft will rotate only once. The machine

enables us to get 12 strokes / minute. The cam is keyed to the

horizontal shaft. The cam is made up of cast iron piece. The

link is connected to the cam stud.

MWT119 MULTI-PURPOSE

MACHINE

ABSTRACT NO :

VIDEO NO :

The pneumatic multi purpose device is an air operated device

used for many small operations. It is a portable one.

Compressed air is the source of energy for this device. The

compressed air is allowed through the nozzle in such a way to

rotate to fan. The rotation obtained is utilized for machining.

The nozzles are welded to the barrel at an angle to facilitate

free rotation. The fan can be rotated in either direction by

operating the one way corks. The rpm and torque of the shaft

depends upon the pressure of the air admitted so by varying

the pressure the rpm and torque can be varied. The parts are

interred connected by thick tubes. Clamps are used at the

connecting parts to prevent leakage. In threaded parts thread

seals are used to prevent leakage.Here the compressed air

from the compressor firstly enters the control unit. In the

control unit the pressure of the air is controlled and sent to the

barrel to rotate the fan in any one direction. The air from the

compressor enters the gate valve. The gate valve controls the

pressure and volume of air. Then the pressure is read by a

pressure gauge. Then the air is admitted to the barrel through

any one of the two one way corks to rotate fan. In the barrel, a

shaft is placed and if carries the fan. The shaft is supported in

either and by bearings. The bearings are placed in the

couplings, which covers the ends of barrel.

MWT120

PEDAL OPERATED

WASH BASIN

ABSTRACT NO :

The water tank is fixed on the top of this equipment which is

used to store the water, the solenoid valve fixed below the

water tank and it have two ports one is connected to the main

pipe another one is connected to the water outlet pipe. The

center of the equipment contains the wash tray arrangement



Hyderabad- 500096 Ph 9542878334.

VIDEO NO :

for collecting the used water (waste water) the wash tray

arrangement’s backside have a pipe for exit the used water to out. The bottom of the equipment have pedal and spring

arrangement and also have a limit switch on the bottom of the

pedal. When the pedal is pressed the pedal’s bottom part press the limit switch then the limit switch is provide the instruction

to the control unit and the control unit operates the solenoid

valve then the water comes out for hand washing whenever

we need water just press the pedal to get the water from this

equipment. This equipment is an easily operated so anyone

can operate this equipment so this is applicable for hotels,

restaurants and homes.

MWT121

PEDAL WASHING

MACHINE

ABSTRACT NO :

VIDEO NO :

The block diagram of pedal washing machine is shown in

figure, it consist of a bevel gear, rotating plate, sprocket chain

mechanism and frame stand. The cycle chain sprocket chain

mechanism is used to transmit the power from the pedal to the

main shaft. The rotating plate is jointed in the end of the main

shaft. The pressurized water is used to supply the water in to

the dish washing plate continuously with the help of multi-

hole nozzle. The outlet water is collected to the inlet tank once

again with proper arrangement.

MWT122 FABRICATION OF

PNEUMATIC VICE

ABSTRACT NO :

VIDEO NO :

Here we are using one key, which act as a control switch

for pneumatic. Microcontroller always check the key

whether it is pressed or not, if the key is pressed, it will

give a low pulse to the controller. When the controller

receives a low pulse from key, then it ON a pneumatic for

gripping the object. When the key is pressed second time,

the controller will off the pneumatic. So that the wise will

release the object. This process will go repeatedly

whenever the key is pressed. These are all done by

microcontroller coding. Air compressor is used for

ON/OFF the pneumatic, when the compressed air is

passed to the pressure control valve; the required

pressure is obtained by adjusting its knob. When the air is

passed to the flow control valve, the speed of movement of piston (pneumatic) is controlled by adjusting the knob.



Hyderabad- 500096 Ph 9542878334.


MULTI SPINDLE DRILL

HEAD

ABSTRACT NO :

VIDEO NO :

This machine includes a first functional portion known as

the bar support which assures the feeding, holding and

driving of the bars. This part is provided with a set of

spindles in which are respectively introduced the bars of

material in question, which bars project from said spindles

towards the cutting tools mounted on a supporting

structure. It includes a great number of pinions and gears

meshing together in order to be able to drive in rotation all

such movable elements and so as to furnish them with the

necessary mechanical torque whilst, for the rest, enabling

their relative displacement, whether this be in translation

or in rotation. It can thus already be noted that the high

number of parts in such first functional portion leads, in

known lathes, to a very substantial space requirement and

weight.

MWT124 ELECTRICAL POWER

GENERATION USING

RAILWAY TRACK

ABSTRACT NO :

VIDEO NO :

The complete diagram of the power generation using

railway track is given below. L-angle frame is inclined in

certain small angle which is used to generate the power.

The pushing power is converted into electrical energy by

proper driving arrangement. The rack & pinion, spring

arrangement is fixed at the railway track which is

mounded bellow the L-angle frame. The spring is used to

return the inclined L-angle frame in same position by

releasing the load. The pinion shaft is connected to the

supporter by end bearings as shown in fig. The larger

sprocket also coupled with the pinion shaft, so that it is

running the same speed of pinion. The larger sprocket is

coupled to the small cycle sprocket with the help of chain

(cycle). This larger sprocket is used to transfer the rotation

force to the smaller sprocket. The smaller sprocket is

running same direction for the forward and reverse

direction of rotational movement of the larger sprocket.

This action locks like a cycle pedaling action. The fly wheel

and gear wheel is also coupled to the smaller sprocket

shaft. The flywheel is used to increase the rpm of the

smaller sprocket shaft. The gear wheel is coupled to the

generator shaft with the help of another gear wheel.The

generator is used here, is permanent magnet D.C

generator. The generated voltage is 12Volt D.C. This D.C

voltage is stored to the Lead-acid 12 Volt battery. The



Hyderabad- 500096 Ph 9542878334.

battery is connected to the inverter. This inverter is used

to convert the 12 Volt D.C to the 230 Volt A.C. This 230

Volt A.C voltage is used to activate the light, fan and etc. By

increasing the capacity of battery and inverter circuit, the

power rating is increased. This arrangement is fitted in

highways; the complete arrangement is kept inside the

floor level except the railway track arrangement.


WINDMILL AND

CONTROLLING THE

DIRECTION

ABSTRACT NO :

VIDEO NO :

The windmill is fixed on the wind blowing area. The motor

is fixed at the bottom of the windmill arrangements. The

center of the windmill motor shaft is attached. The motor

is used to turn the required direction of the windmill to air

flow area. The direction controlling arrangement is fixed on the area not affected by wind blade’s air force. The direction controlling arrangement consists of sensors,

control unit, direction indicator and motor. The direction

indicator is a light weight and it is arranged on horizontal.

It will rotated depends upon the airflow direction. The one

end of the direction indicator is used to identify the

direction of the wind flow by using sensor. The sensor is

fitted below the direction indicator which is shown as in

the bellow diagram. The sensor indicates the correct

direction of airflow and also gives the instruction to the

control unit to rotate the required angle in windmill motor

for rotating the wind blade directions.

MWT126 Degree Turning

Steering Mechanism

ABSTRACT NO :

VIDEO NO :

In this project battery provides the power supply to the control unit.

The equipment contains totally six motors, two motors are coupled

with the vehicle’s left and right wheels of the front side, the next two motors are connected to the vehicle’s left and right side of the back side. The four motors are used to run the vehicle. Another two

motors are connected to rotate the vehicle wheel 90 degree by the

chain drive arrangements. The keypad in the control unit has six

keys they are left, right, forward, reverse, park left, and park right.

We press the left key in the keypad the vehicle turns left side in a

required angle.



Hyderabad- 500096 Ph 9542878334.