Download pdf - Mercedes Econic Bluetec 5

Transcript
Page 1: Mercedes Econic Bluetec 5

Rigid 4x2/6x2/6x4/8x4Low Entry Crew Cab

Special Application Chassis

1824LL1829LL1833LL2629LL2633LL3233LL

dimensions (mm)4x2 4x2 6x2 6x2 6x4 8x4

kerbsider mid steer rear steer double drive mid steerA Wheelbase (first to second axle)* 5100 3900 3900 3900 3900 5100A+ 1350mm (outer axle spread) - - 5250 5250 5250 6450B Front overhang 1850 1850 1850 1850 1850 1850C Rear overhang 1650 1200 1200 1200 1200 1200D Overall length 8600 6950 8300 8300 8300 9500E Frame height at rear axle 910 910 930 930 995 995F Frame depth 284 284 284 284 284 284G Back of exhaust pipe to end of frame 6160 4640 5990 5990 5990 7150H Bumper to back of cab 2032 2032 2032 2032 2032 2032I Back of cab to centre line of front axle 182 182 182 182 182 182J Overall height (nominal) 2900 2900 2920 2920 2990 2990K Ground clearance front 190 190 210 210 280 212L Width over cab 2490 2490 2490 2490 2490 2490M Ground clearance rear 230 230 250 250 300 270N Frame width (at rear) 760 760 760 760 760 760O Bogie spread NA NA 1350 1350 1350 1350P First step height from ground 495 495 515 515 565 565R Cab floor height from ground 840 840 860 860 910 910S Centre line of front axle to rear of exhaust pipe 590 490 490 490 490 490Turning circle (wall to wall) 21.5m 16.1m 20.3m 16.1m 18.2m 22.5Minimum cab gap (to rear of exhaust pipe) 50 50 50 50 50The following overall frame height adjustment is available when stationary:

4x2 model: + 100mm, - 60mm6x2 mid steer model: + 80mm, - 60mm6x2 rear steer model: + 100mm, - 60mm6x4 model: + 100mm, - 60mm8x4 model: + 80mm, - 60mm

Alternative wheelbases options (outer axle spread) 3450 3450 (4200) 3450 (4800) 4200 (5550)4200 4200 (5500) 4200 (5550)4500 4500 (5850)

4800 (6150)*First steer axle to first drive axle on 8x4 model

6x2 MID STEER 6x2 REAR STEER8x4 MID STEER

Page 2: Mercedes Econic Bluetec 5

175kW @ 2200 rpm238PS @ 2200 rpm

850Nm @ 1200 - 1600 rpm627lbft @ 1200 - 1600 rpm

210kW @ 2200 rpm286PS @ 2200 rpm

1120Nm @ 1200 - 1600 rpm826lbft @ 1200 - 1600 rpm

240kW @ 2200 rpm326PS @ 2200 rpm

1300Nm @ 1200 - 1600 rpm960lbft @ 1200 - 1600 rpm

engine 1824LL 1829LL2629LL

1833LL 3233LL2633LL

Type

Max. power

Max. torque

Bore

Stroke

Capacity

Control

Fuel Injection

Cooling

Security

Engine brake

Performance Curves

Mercedes-Benz OM906LA6.37 litre turbo-intercooled6 cylinder direct injectiondiesel to Euro 5 emissions standard

102mm

130mm

6.37 litres

Electronic engine management

Direct injection via unit injectors

Water cooled with hydrostatic fan

Immobiliser to Thatcham H2

Constant throttle & butterfly

Mercedes-Benz OM906LA6.37 litre turbo-intercooled6 cylinder direct injectiondiesel to Euro 5 emissions standard

102mm

130mm

6.37 litres

Electronic engine management

Direct injection via unit injectors

Water cooled with hydrostatic fan

Immobiliser to Thatcham H2

Constant throttle & butterfly

Mercedes-Benz OM926LA7.20 litre turbo-intercooled6 cylinder direct injectiondiesel to Euro 5 emissions standard

106mm

136mm

7.20 litres

Electronic engine management

Direct injection via unit injectors

Water cooled with hydrostatic fan

Immobiliser to Thatcham H2

Constant throttle & butterfly

Gearbox & Gearbox RatiosAllison automatic 6 speed with push button electronic gear selection andtorque control

Models 1824LL, 1829LL, 2629LL 1833LL, 2633LL, 3233LL

Type 3000P 3200P

1st 3.49 3.49

2nd 1.86 1.86

3rd 1.41 1.41

4th 1.00 1.00

5th 0.75 0.75

6th 0.65 0.65

Reverse 5.34 5.34

Rear Axles Ratios & PerformanceModel 1824LL 2629LL 2633LL 3233LLConfiguration 4x2 6x2/6x4 6x2/6x4 8x4Axle Ratio 6.82:1 6.82:1 6.82:1 6.82:1Governed Speed (mph) 56 56 56 56Geared Speed (mph) 62 64 64 64Gradeability %

Max 40 32 33 27Restart 32 28 29 23

AxlesFront Mercedes-Benz forged ‘I’ beamSecond steer Mercedes-Benz forged ‘I’ beam(6x2 8x4) Electronically/hydraulically steeredDrive Mercedes-Benz hub reduction with differential lockDrive (6x4) Mercedes-Benz hub reduction with inter and

cross axle differential locks

transmission

BrakesFront/Rear Disc brakes with ABSService Automatic brake adjustment

Heated air dryerParking Rear spring brakesEngine Constant throttle engine brake and exhaust

brake operated with service brakeCompressor Twin cylinder

Fuel TankCapacity 200 litre alloyMounting Right hand side of chassisSecurity Locking fuel cap

SuspensionFront axle Air suspension with stabiliser and

shock absorbersDrive axle(s) Air suspension with stabiliser and

shock absorbersSecond steer axle Air suspension with airbag pressure(6x2) reduction for traction assistance

Telligent® electronic controlAxle load indicator Sensors built into airbags

AdBlue TankCapacity 25 litre plasticMounting Right hand side of chassis

chassis

1824LL1829LL1833LL2629LL2633LL3233LL

Page 3: Mercedes Econic Bluetec 5

SteeringType Recirculating ball

Variable ratioIntegral power assistanceSteering column lockPneumatically adjustable column

Wheels & TyresWheels 9.00 x 22.5Tyres 4x2 295/80R 22.5

6x2 mid steer 315/80R 22.56x2 rear steer 315/80R 22.56x4 double drive 315/80R 22.58x4 mid steer 315/80R 22.5

ExhaustStainless steel SCR catalytic converter on nearside of frame with vertical tail pipeand 600mm extension1824LL Kerbsider model: stainless steel catalytic converter mounted behindvertically behind cab on nearside

Chassis RailsTwo piece ladder frame, high tensile steel - pre-drilled hole patternsParallel section, unobstructed top flangeLowered front sectionBatteries and air tank carrier mounted on nearside (offside on Kerbsider model)

Electrical SystemsVoltage 24 voltType CAN Databus with P.S.M. electronic interface

for body and equipmentCircuit breakers

Batteries 2 x 12 volt 165AhAlternator 28 volt/80 ampRoad lights Halogen headlamps

Side lightsRoof marker lightsSide marker lightsReversing lightsDirection indicatorsIndicator side repeatersRear fog lamp

Warning lights Air suspension settingEmergency stopMain beam/flasherDirection indicatorsParking brakeRear fog lampHazard lightsCab tilt lockEngine brakeABS

chassis

ConstructionAluminium space frame with sheet mouldedcomposite panelsMeets ECE R29-2 impact requirementsSingle step entryEntry step illuminationHinged driver’s doorFlat floorAir operated folding passenger door – speeddependent automatic closing with matching lock4-point cab suspension (rubber mounts atfront - spring struts at rear shock absorbersfront and rear)Entry grab handlesGrab rail inside front of cababove windscreenHydraulic tilt mechanismInterior height 1935mmHeat insulating glassFront underrun guard on 6x4 and 8x4 modelsPreparation wiring for roof beaconsPreparation wiring for 24 volt monitorEngine underprotection on 6x4 models

TrimHard wearing cloth to seatsMoulded facia/padded steering wheelCloth covered headlining and rear wallInsulated floor coveringMoulded door/side coverings

SeatingAdjustable air suspended driver’s seat withheadrest and 3-point seat beltTwo fixed centre passenger seats with headrestsand lap beltsOne fixed nearside passenger seat with headrestand 3-point seat belt

Standard coloursCab: Arctic WhiteChassis: Nova Grey

Service AccessCab tilts to 53°Engine coolant and windscreen wash fluid reservoirfillers behind cabFront panel access to radiator

StowageFour lockers in rear of cab roofClothing stowage to cab rear wallOddments tray on dashboardStorage with bottle holders behind crew seat

ControlsHeater/demister, multiple outlets to: windscreen,foot wells and door windowsRecirculating air switch3-speed fanKeystart with steering lock and immobiliserLeft hand stalk for indicators, main beam,headlamp flasher, horn, 2-speed wipers plusvariable intermittent wipe and wash/wipeRight hand stalk for engine brake,TempoMat/TempoSet and engine speed controlHazard warning light switchLight switch including rear fog lampElectrically operated driver’s window switchAir suspension ride height raiseAir suspension wander leadPanel light dimmerTelligent® maintenance control panelHeated rear view mirrorsParking brake beside driver’s seatInternal operating switches for folding doorExternal operating switch for folding doorFuse box and PSM module behind driver’s seatTraction aid (6x2 models)

Axle load indicatorIndividual axle weights and overall vehicle weightdisplayed in Telligent® display panel

Protection & FinishCab structure and chassis frame cathodic dipprimed and paintedCab panels in corrosion resistant SMC plastic, and aluminium

VisibilityFull height laminated windscreen with tintedsection to upper edgeElectrically heated rear view mirrorsElectrically adjusted nearside rear view mirrorFront view mirrorWide angle mirrorKerbside mirrorFull height glass panels in folding passenger doorElectrically operated sun blind

RefinementsInterior lights – switch or door operated withnight vision facilityCigarette lighterElectric driver’s windowCD/radioManually operated steel roof hatchAir conditioned cabCruise control

InstrumentsAdjustable instrument illuminationTelligent® display panel:Ambient temperatureSystem failure warning lightCheck mode (daily checks)Service modeDiagnostic modeInstrument gauges – Coolant temperature

– Fuel level– AdBlue level– Engine oil pressure– Brake air pressure

Rev counterAutomatic tachograph (digital)Transmission control and display panel

cab

Page 4: Mercedes Econic Bluetec 5

weights (kg)

optionsCompressed Natural Gas engine producing 279PS and 1000NmParking brake on front axle (not 6x4/8x4)Alternative axle ratio, 6.00:1 (not 6x4/8x4)ASR5 speed Allison transmissionAllison transmission with retarderTelma retarder on certain models/wheelbasesLow roof cab (gives 1400mm nominal interior height) availablewith folding passenger door (hinged passenger door optional)Engine under protection (4x2 and 6x2 models)Halogen fog lightsHinged passenger door for high cabComfort driver suspension seatSingle crew seat ilo three seatsTwin crew seats ilo three seatsVinyl covered crew seatsOmission of co-drivers seat3-piece rear wall cab windows (high roof only)Downward emitting exhaustVertical SCR exhaust 2 x 220Ah batteries100 amp alternatorDeletion of air conditioningChassis prepared for high C of G/tipping body (6x2 rear steer)Stabiliser on trailing axle (6x2 rear steer) for Faun RotoPress bodiesShock absorbers with restricted rebound (4x2 and 6x2 rear steer only)Alternative tyre make to factory standardSpare wheel and tyre315/80R 22.5 tyres on 4x2 models to give 7.5 tonne front axle8 tonne front axle on 4x2 and 6x2 modelsRange of factory cab coloursFront bumper with steel corner sectionsPower take off – auto transmissionEngine rear power take off with spline drive (max.output torque 200Nm)Engine rear power take off with flange drive (max.output torque 600Nm)including flexible couplingReversing warning device300 litre steel fuel tank650mm chassis rear overhang

special CTT optionsShortening of rear overhangAlternative wheelbase options (300mm increments)5.1m Kerbsider model - 600mm wheelbase extension to 5.7mRoof beaconsBattery cut off switches on chassisAir bellow pressure reductionFront air coupling headBrake pedal operated retarderPreparation for firefighting vehicle (selected chassis)Preparation for airfield vehicle (selected chassis)3 point seat belts for crew

1824LL 4x2 2629LL 6x2 2629LL 6x2 2629LL 6x4 3233LL 8x4mid steer rear steer double drive mid steer

Wheelbases mm (first to second axle) # 5100 3900 *3900 *3900 *3900 5100(outer axle spread) 5100 3900 5250 5250 5250 6450Kerb Weights (kg)Front axle 4320 4300 4390 4430 4450 4475Mid/rear axle 1840 1745 1195/1810 1840/1190 – 1120Rear bogie – – – 3030 3460 3460Total 6160 6045 7395 7460 7910 9055

Plated WeightsAuthorised Design Authorised Design Authorised Design Authorised Design Authorised Design

GVW 18000 18000 26000 26000 26000 26000 26000 26000 32000 32000Front axle 7100 7100 7500 7500 7500 7500 7500 7500 8000 8000Steer axle – – 7500 7500 7500 7500 – – 5000 5000Drive axle 1 11500 11500 11500 11500 11500 11500 9500 9500 9500 9500Drive axle 2 – – – – – – 9500 9500 9500 9500

Weights and dimensions are to standard specification with 20 litres of fuel, 5 litres of AdBlue, oil, water and tools. Kerb weights are subject to a manufacturing tolerance of ±2%.

326PS engine adds 80kg to front axle*Moving from 3900mm to 4200mm wheelbase mid steer adds 10kg FA, 0kg MA, 10kg, RA and 20kg to total*Moving from 3900mm to 4200mm wheelbase rear steer adds 10kg FA, 10kg MA, 0kg RA and 20kg to total*Moving from 3900mm to 4200mm wheelbase 6x4 adds 10kg FA, 10kg rear bogie and 20kg to total# First steer axle to first drive axle on 8x4 model

UK UK UK UK UK

Issued by: Mercedes-Benz UK Ltd.,Tongwell, Milton Keynes, MK15 8BA. Telephone: (01908) 245000. Fax: (01908) 245093www.mercedes-benz.co.uk

CV 581 APRIL 09

The contents of this brochure are not bindingand the right is reserved to make modifications

without notice.


Recommended