Transcript
Page 1: No Job Name - Kohler Co. · Kohler Co. is not responsible for cutout errors when the incorrect cutout template is used. Will comply with ADA when installed per section 606

Features• Vitreous china

• Under-mount

• With overflow

• Without faucet hole(s)

• Includes 1193643 clamp assembly

• 17-1/4″ (438 mm) x 13″ (330 mm)

Codes/Standards ApplicableSpecified model meets or exceeds the following:

• ADA

• ASME A112.19.2/CSA B45.1

• ICC/ANSI A117.1

UNDER-MOUNT BATHROOM SINKK-2882

Colors/Finishes• 0: White

• Other: Refer to Price Book for additional colors/finishes

Accessories

• CP: Polished Chrome

• Other: Refer to Price Book for additional colors/finishes

Specified Model

Model Description Colors/FinishesK-2882 Under-mount bathroom sink ❑ 0 ❑ Other_____

Recommended AccessoriesK-8998 Adjustable P-Trap ❑ CP ❑ Other_____

Product SpecificationThe under-mount bathroom sink shall be made of vitreous china. Bathroom sink shall be 17-1/4″ (438 mm) in length and 13″(330 mm) in width. Bathroom sink shall be with overflow and without faucet hole(s). Bathroom sink shall include 1193643 clampassembly. Bathroom sink shall be Kohler Model K-2882-_______.

VERTICYLTM

Page 1 of 21109225-4-E

USA/Canada: 1-800-4KOHLER(1-800-456-4537)www.kohler.com

Page 2: No Job Name - Kohler Co. · Kohler Co. is not responsible for cutout errors when the incorrect cutout template is used. Will comply with ADA when installed per section 606

Technical Information

Fixture*:Basin area 17-1/4″ (438 mm) x 13″ (330 mm)Water depth 3-1/8″ (79 mm)Drain hole Ø 1-3/4″ (44 mm)* Approximate measurements for comparison only.

Cutout template 1109226-7

Included components:Basin clamp assembly 1193643

Installation NotesInstall this product according to the installation guide.NOTICE: Countertop manufacturer or cutter must use thecurrent product template available at www.kohler.com, or bycalling 1-800-4KOHLER. Kohler Co. is not responsible forcutout errors when the incorrect cutout template is used.

Will comply with ADA when installed per section 606Lavatories and Sinks of the 2010 ADA Standards forAccessible Design.

For under-mount installation, countertop thickness cannot begreater than 1″ (25 mm) for ADA compliance.

9-15/16" (252 mm)

7-3/4"(197 mm)

19-13/16" (503 mm)

6-3/4"(171 mm)

1/2" (13 mm)

24" (610 mm)

Recommended ADA Installation

11"(279 mm)

3-1/4"(83 mm)

34"(864 mm)

27"(686 mm)Min

8" (203 mm)Min

9" (229 mm)Min

12-3/8"(314 mm)

15-5/8"(397 mm)

14"(356 mm)

3/8" Hot 3/8" Cold

4" (102 mm)

Product Diagram

VERTICYLTM

VERTICYLTM UNDER-MOUNT BATHROOM SINKPage 2 of 21109225-4-E