Transcript
Page 1: No Job Name - KOHLER日本正規代理店|ジャパン ... · Kohler Co. is not responsible for cutout errors when the incorrect cut-out template is used. Will comply with ADA when

Features• Vitreous china

• Drop-in

• With overflow

• 8″ (203 mm) centers (-8), 4″ (102 mm) centers (-4),or single-hole (-1)

• 21-13/16″ (554 mm) x 16-9/16″ (421 mm) x 8-1/16″(205 mm)

Codes/Standards ApplicableSpecified model meets or exceeds the following:

• ASME A112.19.2/CSA B45.1

• ADA

• ICC/ANSI A117.1

DROP-IN BATHROOM SINKK-2991

Colors/Finishes• 0: White

• Other: Refer to Price Book for additional colors/finishes

Accessories

• CP: Polished Chrome

Specified Model

Model Description Colors/FinishesK-2991-1 Drop-in bathroom sink – single-hole ❑ 0 ❑ Other_____K-2991-4 Drop-in bathroom sink – 4″ (102 mm) ❑ 0 ❑ Other_____K-2991-8 Drop-in bathroom sink – 8″ (203 mm) (shown) ❑ 0 ❑ Other_____

Recommended AccessoriesK-8998 Adjustable P-Trap ❑ CP

Product SpecificationThe drop-in bathroom sink with overflow shall be made of vitreous china. Drop-in bathroom sink shall be 21-13/16″ (554 mm)in length, 16-9/16″ (421 mm) in width, and 8-1/16″ (205 mm) in depth. Bathroom sink shall have 8″ (203 mm) centers(K-2991-8), 4″ (102 mm) centers (K-2991-4), or single-hole (K-2991-1). Bathroom sink shall be Kohler ModelK-2991-_______-_______.

TRESHAMTM

Page 1 of 21162721-4-B

USA/Canada: 1-800-4KOHLER(1-800-456-4537)www.kohler.com

Page 2: No Job Name - KOHLER日本正規代理店|ジャパン ... · Kohler Co. is not responsible for cutout errors when the incorrect cut-out template is used. Will comply with ADA when

Technical Information

Fixture*:Basin area 19-13/16″ (503 mm) x 10-3/16″ (259 mm)Water depth 6-1/16″ (154 mm)Drain hole Ø 1-3/4″ (44 mm)* Approximate measurements for comparison only.

Holes K-2991-8 K-2991-4 K-2991-1Spout Ø 1-3/8″

(35 mm)Ø 1-1/4″(32 mm)

Ø 1-3/8″(35 mm)

Faucet Ø 1-3/8″(35 mm)

Ø 1-1/4″(32 mm)

Included components:Cut-out template 1162721-7

Installation NotesInstall this product according to the installation guide.NOTICE: Countertop manufacturer or cutter must use thecut-out template provided with the product, or a current oneprovided by Kohler Co. (call 1-800-4KOHLER). Kohler Co. isnot responsible for cutout errors when the incorrect cut-outtemplate is used.

Will comply with ADA when installed per Section 606Lavatories of the Act.

4" (102 mm)2-7/8" (73 mm)

10-7/8" (276 mm)

9-7/16" (240 mm)

21-13/16" (554 mm)

K-2991-8

16-9/16" (421 mm)

8-1/16" (205 mm)14-5/16"

(364 mm)

4" (102 mm)2-7/8" (73 mm)

K-2991-12-7/8" (73 mm)

K-2991-43/8" Hot 3/8" Cold

1-1/4" OD

2-7/16" (62 mm)

4" (102 mm)

12"(305 mm)

Recommended ADA Installation

11" (152 mm)

3-3/16" (81 mm)24" (610 mm)

27" (686 mm)Min

9" (229 mm) Min

34" (864 mm)

8" (203 mm)Min

Product Diagram

TRESHAMTM

TRESHAMTM DROP-IN BATHROOM SINKPage 2 of 21162721-4-B


Recommended