Transcript

Phone us: 1300 65 00 35 Fax us: 1800 68 68 96

Our website: www.materialshandling.com.au Email us: [email protected]

Pneumatic Conveying

Dense phase pneumatic conveyors arerecognized for increasing plantefficiencies, saving companies byproviding a cost effective means ofconveying material from storage hoppersfor processing. They utilise compressedair to convey free-flowing materials at lowvelocities over relatively short distances.The air is supplied via an air compressoror from one of our LT series “Roots” typeblowers. Benefits of a dense phase conveyingsystem• Lower Running Costs - dense phase systems have few working parts & maintenance costs are usually very low

• Space Savings - pneumatic piping can be routed along walls and ceilings resulting in more floor space

• Facilitates Bulk Purchasing - lower costs of raw materials

• Better Housekeeping - dense phase conveying virtually eliminates all wastage and spillage - it is clean and economical

• Increased Safety - operators are protected from the hazards of dust and exposed machinery

Dense Phase Conveyors

Suitable ProductsSuitable products for dense phase conveying include:• Alumina• Carbon• Clay• Dust• Flour• Fly ash• Limestone• Milk• Paper scraps• Plaster• Polyethylene pellets• Polymer flake• Powdered coal• Salt• Soya beans• Starch• Sugar• Washing powderThese products are examples only and are not by any means exclusive. Basically, dense phase pneumatic conveying can be used with most powder and granular products.

Rhino Bend Rhino Terminal Point Rhino Gate Diverter

Rhino PinchDiverter

Rhino Bend

MiniPressurePot

CompressedAir Supply

ProductFeed

Product/Air Discharge

Code CP140PP 140 litre pressure pot

Operation of the pressure potsUpon receiving a remote signal, the inletvalve opens and allows product to enterthe pressure vessel. A level sensor (ortimer) will detect that the vessel is fulland close the inlet valve. The dischargevalve opens & compressed air enters thevessel forcing the product along the pipework to the final destination. The next

batch is then allowed to enter thepressure vessel. They cease operationwhen no product is present. Features of pressure pots:• Low air volume• Minimal abrasion• Easy to install• Conveys up to 100 metres• Conveys up to 10 tonnes per hour

CodeCP32PP32 litreminipressurepot

Recommended