Transcript
Page 1: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

REAP Release Notes

www.raisecom.com

Page 2: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom Technology Co., Ltd. provides customers with comprehensive technical support and services. For any

assistance, please contact our local office or company headquarters.

Website: http://www.raisecom.com

Tel: 8610-82883305

Fax: 8610-82883056

Email: [email protected]

Address: Raisecom Building, No. 11, East Area, No. 10 Block, East Xibeiwang Road, Haidian District, Beijing,

P.R.China

Postal code: 100094

-----------------------------------------------------------------------------------------------------------------------------------------

Notice

Copyright ©2014

Raisecom

All rights reserved.

No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means,

electronic or mechanical, including photocopying and microfilm, without permission in Writing from Raisecom

Technology Co., Ltd.

is the trademark of Raisecom Technology Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective holders.

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any kind, express or implied.

Page 3: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Revision Record

Date Version Description Author Remark

2012-10-26 P100R002_01 Document was created. Mike Chen

Jessica Wu

Lee Jorissen

2012-12-03 P100R002_02 Document was modified. Jessica Wu

2013-01-08 P100R002_03 Document was modified. Fannie Fan

2013-01-24 P100R002_04 Document was modified. Fannie Fan

2013-02-26 P100R002_05 Document was modified. Fannie Fan

2013-04-01 P100R003_01 Document was modified. Fannie Fan

2013-04-23 P100R003_02 Document was modified. Jessica Wu

2013-04-26 V1.3.3 Document was modified. Fannie Fan

2013-5-29 V1.3.4 Document was modified. Fannie Fan

2013-07-01 V1.3.5 Document was modified. Fannie Fan

2013-08-21 V1.4.1 Document was modified. Yingyong Kang

2013-09-05 V1.4.2 Document was modified. Yingyong Kang

2013-09-26 V1.4.3 Document was modified Saya Gong

2013-12-17 V1.4.4 Document was modified Xiaoqiang Ren

2014-01-09 V1.4.5 Document was modified Saya Gong

2014-03-13 V1.4.6 Document was modified Saya Gong

2014-04-24 V1.5.1 Document was modified Saya Gong

Page 4: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes Contents

Raisecom Technology Co., Ltd. i

Contents

1 Introduction.................................................................................................................................... 1

2 Products Supported ...................................................................................................................... 2

2.1 Products List..................................................................................................................................................... 2

2.2 Bootstrap List ................................................................................................................................................... 4

3 Compatibility ................................................................................................................................. 6

3.1 Version REAP 1.1.545(2900)/1.1.539(RAX700) ............................................................................................. 6

4 Upgrade Procedure ....................................................................................................................... 7

4.1 Preparation ....................................................................................................................................................... 7

4.2 Normal upgrade operations .............................................................................................................................. 7

4.2.1 Upgrade the REAP software ................................................................................................................... 7

4.2.2 Upgrade Bootstrap 1 ............................................................................................................................... 8

4.2.3 Upgrade Bootstrap 2 ............................................................................................................................... 9

4.2.4 Reboot the device .................................................................................................................................... 9

4.3 Upgrade operations from REAP1.2.4 to REAP1.2.28+ for 2900 Series ........................................................ 10

4.3.1 Upgrade the REAP software ................................................................................................................. 11

4.3.2 Reboot the device .................................................................................................................................. 12

4.3.3 Upgrading the Bootstrap ....................................................................................................................... 13

4.4 Upgrade operations from REAP1.0 to REAP1.1 ........................................................................................... 14

4.4.1 Upgrade the REAP software ................................................................................................................. 14

4.4.2 Reboot the device .................................................................................................................................. 14

4.4.3 Upgrading the Bootstrap ....................................................................................................................... 15

5 MIB Supported ............................................................................................................................ 17

6 Feature Evolution ........................................................................................................................ 28

6.1 Version REAP1.2.514 .................................................................................................................................... 28

6.2 Version REAP 1.2.311( 2900)/1.2.315(RAX700)/1.2.279(2100) ................................................................... 29

6.3 Version REAP 1.2.265(3000G-1)/1.2.279(3000G-2) ..................................................................................... 30

6.4 Version REAP 1.2.234(2900)/1.2.241(RAX700)/1.2.225(2100) ................................................................... 30

6.5 Version REAP 1.2.206(2900)/1.2.208(RAX700/1.2.205(2100) ..................................................................... 30

6.6 Version REAP 1.2.66(2900)/1.2.47(RAX700)/1.2.39(2100) ......................................................................... 30

6.7 Version REAP 1.2.28(2900)/1.2.24(RAX700) ............................................................................................... 31

Page 5: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes Contents

Raisecom Technology Co., Ltd. ii

6.8 Version REAP1.2.4(2900/RAX700/2100) ..................................................................................................... 31

6.9 Version REAP 1.1.641(2900)/1.1.664(RAX700) ........................................................................................... 32

6.10 Version REAP 1.1.608(2900)/1.1.624(RAX700) ......................................................................................... 32

6.11 Version REAP 1.1.569 (2900)/1.1.574(RAX700 ) ....................................................................................... 32

6.12 Version REAP 1.1.545(2900)/1.1.539(RAX700) ......................................................................................... 33

6.13 Version REAP 1.1.150(2900)/1.1.147(RAX700) ......................................................................................... 34

6.14 Version REAP 1.1.123(2900)/1.1.120(RAX700) ......................................................................................... 35

6.15 Version REAP 1.1.75(2900)/1.1.73(RAX700) ............................................................................................. 35

6.16 Version REAP 1.1.50(2900)/1.1.48(RAX700) ............................................................................................. 35

6.17 Version REAP 1.1.34(2900)/1.1.13(RAX700) ............................................................................................. 35

6.18 Version REAP 1.0.32(2900)/1.0.49(RAX700) ............................................................................................. 36

6.19 Version REAP 1.0.9(2900)/1.0.17(RAX700) ............................................................................................... 36

6.20 Version REAP 1.0.1(2900/RAX700) ............................................................................................................ 36

7 Resolved Issue List ..................................................................................................................... 38

7.1 Version REAP1.2.514 .................................................................................................................................... 38

7.2 Version REAP 1.2.311( 2900)/1.2.315(RAX700)/1.2.279(2100) ................................................................... 38

7.3 Version REAP 1.2.234(2900)/1.2.241(RAX700)/1.2.225(2100) ................................................................... 39

7.4 Version REAP 1.2.206(2900)/1.2.208(RAX700/1.2.205(2100) ..................................................................... 39

7.5 Version REAP 1.2.66(2900)/1.2.47(RAX700)/1.2.39(2100) ......................................................................... 39

7.6 Version REAP 1.2.4(2900/RAX700/2100)..................................................................................................... 39

7.7 Version REAP 1.1.641(2900)/1.1.664(RAX700) ........................................................................................... 40

7.8 Version REAP 1.1.608 (2900)/1.1.624(RAX700) .......................................................................................... 40

7.9 Version REAP 1.1.569(2900)/1.1.574(RAX700) ........................................................................................... 40

7.10 Version REAP 1.1.545(2900)/1.1.539(RAX700) ......................................................................................... 40

7.11 Version REAP 1.1.150(2900)/1.1.147(RAX700) ......................................................................................... 41

7.12 Version REAP 1.1.123(2900)/1.1.120(RAX700) ......................................................................................... 41

7.13 Version REAP 1.1.75(2900)/1.1.73(RAX700) ............................................................................................. 41

7.14 Version REAP 1.1.50(2900)/1.1.48(RAX700) ............................................................................................. 41

7.15 Version REAP 1.1.34(2900)/1.1.13(RAX700) ............................................................................................. 42

7.16 Version REAP 1.0.32(2900)/1.0.49(RAX700) ............................................................................................. 42

7.17 Version REAP 1.0.9(2900)/1.0.17(RAX700 ................................................................................................ 43

7.18 Version REAP 1.0.1(2900/RAX700) ............................................................................................................ 43

8 CLI Command Changes ............................................................................................................. 44

8.1 Version REAP1.2.514 .................................................................................................................................... 44

8.1.1 Added new CLI commands ................................................................................................................... 44

8.1.2 CLI Command changes ......................................................................................................................... 46

8.2 Version REAP 1.2.311(2900)/1.2.315(RAX700)/1.2.279(2100) .................................................................... 49

8.2.1 Added new CLI commands ................................................................................................................... 49

8.3 Version REAP1.2.234(2900)/1.2.241(RAX700)/1.2.225(2100) .................................................................... 49

8.3.1 Added new CLI commands ................................................................................................................... 49

8.3.2 CLI Command changes ......................................................................................................................... 49

Page 6: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes Contents

Raisecom Technology Co., Ltd. iii

8.4 Version REAP 1.2.206(2900)/1.2.208(RAX700)/1.2.205(2100) ................................................................... 50

8.4.1 Added new CLI commands ................................................................................................................... 50

8.4.2 CLI Command changes ......................................................................................................................... 50

8.4.3 Removed CLI commands ...................................................................................................................... 50

8.5 Version REAP 1.2.47(RAX700) ..................................................................................................................... 50

8.5.1 Added new CLI commands ................................................................................................................... 50

8.6 Version REAP 1.2.28(2900)/1.2.24(RAX700 ................................................................................................ 50

8.6.1 Added new CLI commands ................................................................................................................... 50

8.6.2 Removed CLI commands ...................................................................................................................... 51

8.7 Version REAP1.2.4(2900/RAX700) .............................................................................................................. 51

8.7.1 Added new CLI commands ................................................................................................................... 51

8.7.2 CLI Command changes ......................................................................................................................... 54

8.8 Version REAP 1.1.641(2900)/1.1.664(RAX700) ........................................................................................... 54

8.8.1 Added new CLI commands ................................................................................................................... 54

8.9 Version REAP 1.1.608(2900)/1.1.624(RAX700) ........................................................................................... 55

8.9.1 Added new CLI commands ................................................................................................................... 55

8.9.2 CLI Command changes ......................................................................................................................... 55

8.9.3 Removed CLI commands ...................................................................................................................... 55

8.10 Version REAP 1.1.569(2900)/1.1.574(RAX700) ......................................................................................... 55

8.10.1 Added new CLI commands ................................................................................................................. 55

8.10.2 CLI Command changes ....................................................................................................................... 56

8.11 Version REAP 1.1.545(2900)/1.1.539(RAX700) ......................................................................................... 57

8.11.1 Added new CLI commands ................................................................................................................. 57

8.11.2 CLI Command changes ....................................................................................................................... 60

8.11.3 Removed CLI commands–linksTrack ................................................................................................. 64

8.12 Version REAP 1.1.150(2900)/1.1.147(RAX700) ......................................................................................... 65

8.12.1 CLI Command changes ....................................................................................................................... 65

8.13 Version REAP 1.1.123(2900)/1.1.120(RAX700) ......................................................................................... 65

8.13.1 Added new CLI commands ................................................................................................................. 65

8.13.2 CLI Command changes ....................................................................................................................... 65

8.14 Version REAP 1.1.75(2900)/1.1.73(RAX700) ............................................................................................. 66

8.14.1 Added new CLI commands ................................................................................................................. 66

8.14.2 CLI Command changes ....................................................................................................................... 66

8.15 Version REAP 1.1.34(2900)/1.1.13(RAX700) ............................................................................................. 66

8.15.1 Added new CLI Mode – ITU-T Y.1564 .............................................................................................. 66

8.15.2 Added new CLI commands ................................................................................................................. 66

8.15.3 CLI Command changes ....................................................................................................................... 70

8.15.4 Removed CLI commands .................................................................................................................... 71

8.16 Version REAP 1.0.32(2900)/1.0.49(RAX700) ............................................................................................. 72

8.16.1 Added new CLI commands ................................................................................................................. 72

8.16.2 CLI Command changes ....................................................................................................................... 73

8.17 Version REAP 1.0.1(2900/RAX700) ............................................................................................................ 74

Page 7: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes Contents

Raisecom Technology Co., Ltd. iv

8.17.1 Added new CLI commands ................................................................................................................. 74

8.17.2 CLI Command changes ....................................................................................................................... 74

9 Product Issue List ........................................................................................................................ 75

9.1 Issue ID: ESW00017452 ................................................................................................................................ 75

9.2 Issue ID: ESW00017782 ................................................................................................................................ 75

9.3 Issue ID: ESW00017783 ................................................................................................................................ 75

9.4 Issue ID: ESW00017643 ................................................................................................................................ 75

9.5 Issue ID: ESW00018455 ................................................................................................................................ 75

9.6 Issue ID: ESW00018530 ESW00018610 ....................................................................................................... 75

9.7 Issue ID: ESW00018569 ................................................................................................................................ 76

9.8 Issue ID: ESW00012501 ................................................................................................................................ 76

9.9 Issue ID: ESW00012616 ................................................................................................................................ 76

9.10 Issue ID: ESW00012902 .............................................................................................................................. 76

9.11 Issue ID: ESW00013820 .............................................................................................................................. 76

9.12 Issue ID: ESW00006557 .............................................................................................................................. 76

9.13 Issue ID:ESW00003196 ............................................................................................................................... 76

9.14 Issue ID:ESW00004403 ............................................................................................................................... 76

9.15 Issue ID:ESW00004443 ............................................................................................................................... 77

9.16 Issue ID:ESW00004553 ............................................................................................................................... 77

9.17 Issue ID:ESW00005179 ............................................................................................................................... 77

9.18 Issue ID:ESW00005151 ............................................................................................................................... 77

Page 8: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 1 Introduction

Raisecom Technology Co., Ltd. 1

1 Introduction

REAP 1.2.512 is the new official REAP (Raisecom Ethernet Access Platform) software.

Page 9: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 2 Products Supported

Raisecom Technology Co., Ltd. 2

2 Products Supported

2.1 Products List

Series Products Product Version

Bootstrap Version Software Version

2900 ISCOM2924GF-4C A.04 after

ISCOM2924GF_Bootstra

p2_5.0.1_2012080

after ISCOM2900G-

1_REAP_1.2.514_2014

0424

A.03

A.02

A.01

A.00

after

ISCOM2924GF_Bootstra

p2_5.0.1_2012080

after

ISCOM2924GF_REAP

_1.0.1_20120802

ISCOM2924GF-4GE A.02 after

ISCOM2924GF_Bootstra

p2_5.0.1_20120802

after ISCOM2900G-

1_REAP_1.2.514_2014

0424

A.01

A.00

after

ISCOM2924GF_Bootstra

p2_5.0.1_20120802

after

ISCOM2924GF_REAP

_1.0.1_20120802

ISCOM2948G-4C A.01 after ISCOM2900G-

1S_Bootstrap2_5.2.1_201

31213

after ISCOM2900G-

1_REAP_1.2.514_2014

0424

A.00 after

ISCOM2900G-

1S_Bootstrap2_5.2.1_201

31213

after

ISCOM2900G-

1_REAP_1.2.206_2013

1213

ISCOM2948GF-4C A.03 after ISCOM2900G-

1S_Bootstrap2_5.2.1_201

31213

after ISCOM2900G-

1_REAP_1.2.514_2014

0424

Page 10: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 2 Products Supported

Raisecom Technology Co., Ltd. 3

Series Products Product Version

Bootstrap Version Software Version

A.02 after

ISCOM2900G-

1S_Bootstrap2_5.2.1_201

31213

after

ISCOM2900G-

1_REAP_1.2.206_2013

1213

ISCOM2924G-4C A.02 after ISCOM2900G-

1S_Bootstrap2_5.2.1_201

31213

after ISCOM2900G-

1_REAP_1.2.514_2014

0424

A.01 after

ISCOM2900G-

1S_Bootstrap2_5.2.1_201

31213

after

ISCOM2900G-

1_REAP_1.2.206_2013

1213

RAX700 ISCOM RAX711 A.02

A.01

A.00

after

ISCOMRAX711_Bootstr

ap2_5.0.1_20120803

after

ISCOM2906MA_REA

P_1.0.1_20120802

2100 ISCOM2128G A.00 after

ISCOM2100G_1_Bootstr

ap2_5.2.0_20130816

after

ISCOM2100G_1_REA

P_1.2.4_20130817

3000G-1 ISCOM3024G A.00 after

ISCOM2100G-

1_Bootstrap2_5.2.1_2013

1213

after

ISCOM3000G-

1_REAP_1.2.265_2014

0305

ISCOM3024 A.00 after

ISCOM2100G-

1_Bootstrap2_5.2.1_2013

1213

after

ISCOM3000G-

1_REAP_1.2.265_2014

0305

3000G-2 ISCOM3052G A.01 after

ISCOM2900G-

1S_Bootstrap2_5.2.1_201

31213

after

ISCOM3000G-

2_REAP_1.2.279_2014

0305

ISCOM3024C A.02 after

ISCOM2900G-

1_Bootstrap2_5.2.1_2013

1213

after

ISCOM3000G-

2_REAP_1.2.279_2014

0305

ISCOM3024GF A.01 after

ISCOM2900G-

1_Bootstrap2_5.2.1_2013

1213

after

ISCOM3000G-

2_REAP_1.2.279_2014

0305

Page 11: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 2 Products Supported

Raisecom Technology Co., Ltd. 4

2.2 Bootstrap List

Series Bootstrap Version Remark

2900 ISCOM2900G-1_Bootstrap2_5.2.1_20131213

ISCOM2900G-1S_Bootstrap2_5.2.1_20131213

ISCOM2900G_1_Bootstrap2_5.2.0_20130816

ISCOM2924GF_Bootstrap2_5.1.2_20130529 Support all hardware

versions and REAP versions

of the ISCOM2924GF-

4C/4GE. The function of

long jump is supported.

ISCOM2924GF_Bootstrap2_5.1.1_20130124

ISCOM2924GF_Bootstrap2_5.1.1_20121224

ISCOM2924GF_Bootstrap2_5.1.1_20121030

It is switched from UBoot to

WinBoot. For the

ISCOM2924GF-4C/4GE, it

supports all hardware

version and REAP versions

that the decompressed file is

smaller than 32 MBytes. The

function of dual-system is

supported.

ISCOM2924GF_Bootstrap2_5.0.1_20120802

It is UBoot. For the

ISCOM2924GF-4C/4GE, it

supports all hardware

version and REAP versions

that the decompressed file is

smaller than 32 MBytes.

RAX700 ISCOMRAX711_1_Bootstrap2_5.2.0_20130816

ISCOMRAX711_Bootstrap2_5.1.2_20130529 Support all hardware

versions and REAP versions

of the ISCOM RAX711. The

function of long jump is

supported.

ISCOMRAX711_Bootstrap2_5.1.1_20121224

ISCOMRAX711_Bootstrap2_5.1.1_20121030 It is switched from UBoot to

WinBoot. For the ISCOM

RAX711, it supports all

hardware version and REAP

versions that the

decompressed file is smaller

than 32 MBytes. The

function of dual-system is

supported.

Page 12: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 2 Products Supported

Raisecom Technology Co., Ltd. 5

Series Bootstrap Version Remark

ISCOMRAX711_Bootstrap2_5.0.1_20120803 It is UBoot. For the ISCOM

RAX711, it supports all

hardware version and REAP

versions that the

decompressed file is smaller

than 32 MBytes.

2100 ISCOM2100G-1_Bootstrap2_5.2.1_20131213

ISCOM2100G_1_Bootstrap2_5.2.0_20130816

3000G-1 ISCOM2100G-1_Bootstrap2_5.2.1_20131213

3000G-2 ISCOM2900G-1_Bootstrap2_5.2.1_20131213

ISCOM2900G-1S_Bootstrap2_5.2.1_20131213

Page 13: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 3 Compatibility

Raisecom Technology Co., Ltd. 6

3 Compatibility

3.1 Version REAP 1.1.545(2900)/1.1.539(RAX700) When configure UP MEP, it need to configure SDP port. If not, can’t find remote-MEP.

Modify the default Port Mode from default Access mode on all ports to default Access

mode on UNI Ports and default Trunk mode on NNI Ports.(For RAX700 Series only)

TheCLIofY.1564 is different with the last version, the detail information please refer to

“8CLICommandChanges”. (For RAX700 Series only)

Page 14: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 4 Upgrade Procedure

Raisecom Technology Co., Ltd. 7

4 Upgrade Procedure

All of products have to be upgraded to Bootstrap5.2 for further deployment. Please following

the steps below to upgrade, otherwise it may be damaged.

4.1 Preparation Determine the version of the device. If the REAP versions are 1.1 or above(1.2.206 for

2900 series excluded), please upgrade REAP and Bootstrap firmware following the

procedure of "4.2 Normal upgrade operations", else upgrade REAP and Bootstrap

firmware following the procedure of "4.3 Upgrade operations from REAP1.2.4 to

REAP1.2.X for 2900 Series" or "4.4 Upgrade operations from REAP1.0 to REAP1.1".

An FTP server will need to be provisioned on the applicable IP subnet so that the device

to be upgraded can access it.

Save the following firmware files to the root folder on the FTP server, The 2900 for

example:

− ISCOM2900G-1_Bootstrap1_5.2.1_20131213

− ISCOM2900G-1_Bootstrap2_5.2.1_20131213

− ISCOM2900G-1S_Bootstrap1_5.2.1_20131213

− ISCOM2900G-1S_Bootstrap2_5.2.1_20131213

− ISCOM2900G-1_REAP_1.2.514_20140424

4.2 Normal upgrade operations

4.2.1 Upgrade the REAP software

Enter the Enable mode in the REAP operating system and upgrade the REAP firmware via

FTP or TFTP.

Example:

Page 15: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 4 Upgrade Procedure

Raisecom Technology Co., Ltd. 8

Raisecom#download system-boot tftp 192.168.17.18 ISCOM2900G-

1_REAP_1.2.514_20140424

Waiting...

Downloading 6371K

Saving to flash 6371K/6371K

Success

or

Raisecom#download system-boot ftp 192.168.17.18 ISCOM raisecom

ISCOM2900G-1_REAP_1.2.514_20140424

Waiting...

Downloading 6371K

Saving to flash 6371K/6371K

Success

The upgrading process will take several minutes to complete. Do not power off the device

during the upgrading process, otherwise the device may be damaged.

4.2.2 Upgrade Bootstrap 1

If the existing bootstrap version is different from release version, please upgrade

Bootstrap 1 and Bootstrap 2, otherwise please reboot directly.

ISCOM2900G-1S_Bootstrap1_5.2.1_20131213 is for ISCOM2948G-

4C\ISCOM2948GF-4C

ISCOM2900G-1_Bootstrap1_5.2.1_20131213 is for ISCOM2924GF-4C\4GE

Enter the Enable mode in the REAP operating system and upgrade Bootstrap 1 via FTP or

TFTP.

Example:

Raisecom#download bootstrap tftp 192.168.17.18 ISCOM2900G-

1_Bootstrap1_5.2.1_20131213

Waiting...

Start

Download small boot...

Downloading

Success

or

Raisecom#download system-boot ftp 192.168.17.18 ISCOM raisecom

ISCOM2900G-1_Bootstrap1_5.2.1_20131213

Waiting...

Start

Download small boot...

Downloading

Page 16: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 4 Upgrade Procedure

Raisecom Technology Co., Ltd. 9

Success

The upgrading process will take several minutes to complete. Do not power off the device

during the upgrading process, otherwise the device may be damaged.

4.2.3 Upgrade Bootstrap 2

If the existing bootstrap version is different from the release version, please upgrade

Bootstrap 1 and Bootstrap 2; otherwise please reboot directly.

ISCOM2900G-1S_Bootstrap2_5.2.1_20131213 is for ISCOM2948G-

4C\ISCOM2948GF-4C

ISCOM2900G-1_Bootstrap2_5.2.1_20131213 is for ISCOM2924GF-4C\4GE

Enter the Enable mode in the REAP operating system and upgrade Bootstrap 2 via FTP or

TFTP.

Example:

Raisecom#download bootstrap tftp 192.168.17.18 ISCOM2900G-

1_Bootstrap2_5.2.1_20131213

Waiting...

Start

Download big boot...

Downloading

Success

or

Raisecom#download system-boot Error! Hyperlink reference not valid. ISCOM

raisecom ISCOM2900G-1_Bootstrap2_5.2.1_20131213

Waiting...

Start

Download big boot...

Downloading

Success

The upgrading process will take several minutes to complete. Do not power off the device

during the upgrading process, otherwise the device may be damaged.

4.2.4 Reboot the device

Reboot the device and enter the REAP session.

Page 17: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 4 Upgrade Procedure

Raisecom Technology Co., Ltd. 10

Example:

Raisecom#reboot now

Rebooting ...

begin...

ram size: 128M DDR testing...done

File System Version:1.0

Init flash ...Done

2924GF_4GE_4C_Bootstrap_5.2.0_20130816, Raisecom Compiled Aug 16 2013,

19:03:27(Leading bootrom)

Base Ethernet MAC address: 00:0e:5e:00:00:1a

Press space into Bootstrap menu...

1

auto-booting...

Decompress start(system index 1) ...

Loading image... 21441408

Decompress successfully

Entering....

loading...

Adding 33291 symbols for standalone.

Init Switch Hardware....Done!

Init Switch Core Software....Done!

############################################################

# #

# Welcome to REAP #

# #

# Press 'RETURN' to connect and config this system #

# #

############################################################

Login:

4.3 Upgrade operations from REAP1.2.4 to REAP1.2.28+ for 2900 Series These upgrade operations are adopted forISCOM2924GF-4GE and ISCOM2924GF-4C, while normal upgrade

operations can also be feasible forISCOM2924GF-4C.

Page 18: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 4 Upgrade Procedure

Raisecom Technology Co., Ltd. 11

4.3.1 Upgrade the REAP software

Reboot the device and Press space into Bootstrap menu after "Press space into

Bootstrap menu..." appeared.

Example:

Raisecom#reboot now

Rebooting ...

begin...

ram size:256M testing...done

Init flash ...Done

ISCOM2924GF_Bootstrap_5.0.1_20120802 Compiled Aug 02 2012, 14:58:12

Base Ethernet MAC address: 00:0e:5e:00:03:04

Press space into Bootstrap menu...

7 <----Nowpress space into bootstrap menu

Then, press “T” to download REAP firmware via FTP or TFTP.

Example:

[Raisecom]:T

dev name:et

unit num:0

file name:system_boot.Z ISCOM2900G_1_REAP_1.2.25_20130904

local ip:192.168.1.1192.168.1.10

server ip:192.168.1.2192.168.1.18

user:wrs ISCOM

password:wrs raisecom

Using default network mask = 0xFF000000

Opening the FTP is successful,

..........................

Loading file length is:0x638ad8

loading... 100%

Then, press “b” to boot an executable image and enter the REAP session.

[Raisecom]: b

Decompress start(system index 2) ...

Loading image... 21441408

Decompress successfully

Entering....

loading...

Adding 33291 symbols for standalone.

Init Switch Hardware....Done!

Init Switch Core Software....Done!

############################################################

# #

Page 19: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 4 Upgrade Procedure

Raisecom Technology Co., Ltd. 12

# Welcome to REAP #

# #

# Press 'RETURN' to connect and config this system #

# #

############################################################

Login:

The upgrading process will take several minutes to complete. Do not power off the device

during the upgrading process, otherwise the device may be damaged.

4.3.2 Reboot the device

Reboot the device and enter the REAP session.

Example:

Raisecom#reboot now

Rebooting ...

begin...

ram size: 128M DDR testing...done

File System Version:1.0

Init flash ...Done

2924GF_4GE_4C_Bootstrap_5.2.0_20130816, Raisecom Compiled Aug 16 2013,

19:03:27(Leading bootrom)

Base Ethernet MAC address: 00:0e:5e:00:00:1a

Press space into Bootstrap menu...

1

auto-booting...

Decompress start(system index 1) ...

Loading image... 21441408

Decompress successfully

Entering....

loading...

Adding 33291 symbols for standalone.

Init Switch Hardware....Done!

Init Switch Core Software....Done!

############################################################

# #

# Welcome to REAP #

Page 20: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 4 Upgrade Procedure

Raisecom Technology Co., Ltd. 13

# #

# Press 'RETURN' to connect and config this system #

# #

############################################################

Login:

4.3.3 Upgrading the Bootstrap

Enter the Enable mode in the REAP operating system and upgrade Bootstrap1 then

Bootstrap2 files via FTP or TFTP.

Example:

/*Upgrade Bootstrap1*/

Raisecom#download bootstrap tftp 192.168.17.18

ISCOM2924GF_Bootstrap1_5.1.1_20121030

Waiting…

Start

Download small boot…

Downloading

Success

or

Raisecom#download system-bootftp 192.168.17.18 ISCOM raisecom

ISCOM2900G_1_Bootstrap1_5.2.0_20130816

Waiting...

Start

Download small boot...

Downloading

Success

/*Upgrade Bootstrap2*/

Raisecom#download bootstrap tftp 192.168.17.18

ISCOM2924GF_Bootstrap2_5.1.1_20121030

Waiting…

Start

Download big boot…

Downloading

Success

or

Raisecom#download system-boot Error! Hyperlink reference not valid. ISCOM

raisecom ISCOM2900G_1_Bootstrap2_5.2.0_20130816

Waiting...

Start

Download big boot...

Downloading

Success

Page 21: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 4 Upgrade Procedure

Raisecom Technology Co., Ltd. 14

Raisecom#reboot now

The upgrading process will take several minutes to complete. Do not power off the device

during the upgrading process, otherwise the device may be damaged.

4.4 Upgrade operations from REAP1.0 to REAP1.1

4.4.1 Upgrade the REAP software

Enter the Enable mode in the REAP operating system and upgrade the REAP firmware via

FTP or TFTP.

Example:

Raisecom#download system-boot tftp 192.168.17.18

ISCOM2924GF_REAP_1.1.50_20121205

Waiting….Start

Downloading 5449K

Success

or

Raisecom#download system-boot ftp 192.168.17.18 ISCOM raisecom

ISCOM2924GF_REAP_1.1.50_20121205

Waiting….Start

Downloading 5449K

Success

The upgrading process will take several minutes to complete. Do not power off the device

during the upgrading process, otherwise the device may be damaged.

4.4.2 Reboot the device

Reboot the device and enter the REAP session.

Example:

Raisecom#reboot now

Rebooting ...

begin...

ram size:256M testing...done

Init flash ...Done

ISCOM2924GF_Bootstrap_5.0.1_20120802 Compiled Aug 02 2012, 14:58:12

Page 22: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 4 Upgrade Procedure

Raisecom Technology Co., Ltd. 15

Base Ethernet MAC address: 00:0e:5e:00:03:04

Press space into Bootstrap menu...

0

Loading ISCOM2924GF_REAP_1.1.50_20121205 (System index 1)...

Decompress start...

CRC Checking...OK

Loading image... 5448042

Decompress success

Entering....

Adding 27832 symbols for standalone.

Init Switch Hardware....Done!

Init Switch Core Software....Init SNMP Factory Users....DONE!

ifconfig: ipcom_socketioctl() failed to delete IPv4 address: Can't assign

requested address

Loading saved configuration ....DONE!

Done!

############################################################

# #

# Welcome to Raisecom#

# #

# Press 'RETURN' to connect and config this system #

# #

############################################################

Login:

4.4.3 Upgrading the Bootstrap

Enter the Enable mode in the REAP operating system and upgrade Bootstrap1 then

Bootstrap2 files via FTP or TFTP.

Example:

/*Upgrade Bootstrap1*/

Raisecom#download bootstrap tftp 192.168.17.18

ISCOM2924GF_Bootstrap1_5.1.1_20121030

Waiting…

Start

Download small boot…

Downloading

Success

/*Upgrade Bootstrap2*/

Raisecom#download bootstrap tftp 192.168.17.18

ISCOM2924GF_Bootstrap2_5.1.1_20121030

Waiting…

Start

Download big boot…

Downloading

Success

Raisecom#reboot now

Page 23: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 4 Upgrade Procedure

Raisecom Technology Co., Ltd. 16

The upgrading process will take several minutes to complete. Do not power off the device

during the upgrading process, otherwise the device may be damaged.

Page 24: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 5 MIB Supported

Raisecom Technology Co., Ltd. 17

5 MIB Supported

MIB Private

or

RFC MIB

Supports Description

RAISECOM-SLA-

MIB

private rcSlaConfigGroup

rcSlaScheduleGroup

rcSlaThresholdGroup

rcSlaMaintenanceGroup

rcSlaThresholdProfileGroup

The MIB module for SLA

configuration, schedule, test,

Maintenance Interval and threshold

profile result.

MEF-SOAM-PM-

MIB

MEF36 All group Management of Ethernet Services

Operations, Administration and

Maintenance for Performance Monitoring.

RAISECOM-

ETHERSAM-MIB

private All groups The MIB module for ITU-T Y.1564

configuration and test result.

DHCP-CLIENT-

MIB

private All group The MIB module forDHCP Client.

AUTO-

CONFIGURATIO

N-MIB

private All group The MIB module for auto-configuration.

RAISECOM-

AUTOPROVISIO

NMDEV-MIB

private All group The MIB module for zero-touch auto

provisioning.

SWITCH-

VLANCFG-MIB

private All groups but rcVlanCfgPriority Management of VLAN,including port

VLAN and customer VLAN.

Page 25: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 5 MIB Supported

Raisecom Technology Co., Ltd. 18

MIB Private

or

RFC MIB

Supports Description

Q-BRIDGE-MIB rfc4363 dot1qVlanVersionNumber

dot1qMaxVlanId

dot1qMaxSupportedVlans

dot1qNumVlans

dot1qVlanCurrentTable

dot1qVlanStaticTable

dot1qPortVlanTable(exclude

GVRP)

dot1qStaticMulticastTable

dot1qFdbTable

dot1qTpFdbTable

The MIB module for VLAN configuration

and static multicast.

SWTICH-

VLANXC-MIB

private All group The MIB module for VLAN cross-

connection.

RAISECOM-

QINQ-MIB

private rcQinQPortTable

rcVlanMapPortTable

rcFlexibleQinQPortTable

rcQinQVlanMapPortTable

rcQinQVlanMapUntagAddOuterTa

gPortTable

rcQinQVlanMapSrcMacBasedTabl

e

rcQinQVlanMapEtherTypeBasedTa

ble

rcQinQVlanMapSrcIpBasedTable

rcQinQVlanTransAclBasedTable

rcQinQVlanMapAclBasedTable

The MIB module for basic and flexible

QinQ.

SWITCH-

MACCONFIG-

MIB

private rcStaticMacTable

rcMacCountGroup

The MIB module for static unicast MAC

and MAC counter.

SWITCH-

PORTSECURITY-

MIB

private All groups The MIB module for port security.

Page 26: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 5 MIB Supported

Raisecom Technology Co., Ltd. 19

MIB Private

or

RFC MIB

Supports Description

SWITCH-

RATELIMIT-MIB

private All groups The MIB module for port rate-limit and

VLAN rate-limit.

SWITCH-

VLANPORT-

RATELIMIT-MIB

private All groups The MIB module for rate-limit based on

per port and per VLAN.

RAISECOM-

L2CP-MIB

private All groups The MIB module for layer 2 control

protocol packet process.

RAISECOM-

LBDETECT-MIB

private All groups The MIB module for loopback detection.

SWITCH-

INTERFACE-

PORT-MIB

private All groups The MIB module for physical interface

configuration and status.

IF-MIB rfc2233 ifTable

ifXTable

ifNumber

ifTableLastChange

Generic objects for network interface

sublayers

SWITCH-

IFEXTEND-MIB

private All groups The MIB module for interface description.

EtherLike-MIB rfc2665 dot3PauseTable

dot3StatsTable

Statistics for a collection of Ethernet-like

interfaces

RAISECOM-

OAM-MIB

private All groups The MIB module for OAM trap and

variable management.

DOT3-OAM-MIB IEEE802.3ah All groups Managing the new Ethernet OAM features

introduced by the Ethernet in the First Mile

taskforce (IEEE802.3ah).

RAISECOM-CFM-

MIB

private All but rcCfmPMxxxx and

rcCfmNotifications group

The MIB module for IEEE802.1ag.

RAISECOM-

DOT1AG-MIB

private All groups Private MIB module for CFM, same as

IEEE8021-CFM-MIB81 standard MIB.

Page 27: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 5 MIB Supported

Raisecom Technology Co., Ltd. 20

MIB Private

or

RFC MIB

Supports Description

IEEE8021-CFM-

MIB

IEEE802.1ag All but dot1agCfmDefaultMd and

dot1agCfmMdMhfCreation

Connectivity Fault Management module

for managing IEEE 802.1ag.

RAISECOM-

ELMI-MIB

private All groups The MIB module for MEF16 (E-LMI).

RAISECOM-

ELPS-MIB

private All groups The MIB module for Ethernet Linear

Protection Switching defined in ITU-T

G.8031.

SWITCH-ERING-

MIB

Private All groups The MIB module for Raisecomprivate ring

protocol.

RAISECOM-

ERPS-MIB

private All groups The MIB module for Ethernet Ring

Protection Switching defined in ITU-T

G.8032.

RAISECOM-

LINKAGGREGAT

ION-MIB

private All groups The MIB module for link aggregation.

IEEE8023-LAG-

MIB

IEEE802.1ax All groups The Link Aggregation module for

managing IEEE 802.1AX.

SWITCH-

LINKSTATETRA

CK-MIB

private All groups The MIB module for Link state track.

SWITCH-MSTP-

MIB

private All groups The MIB module for Multiple Spanning

Tree Protocol.

BRIDGE-MIB rfc1493 dot1dStp group The MIB module for Spanning-tree.

SWITCH-

PORTBACKUP-

MIB

private All groups The MIB module for Port backup.

RAISECOM-VCT-

MIB

private All groups The MIB module for cable diagnose test.

RAISECOM-

OPTICAL-

TRANSCEIVER-

MIB

private All groups The MIB module for the digital diagnostics

on the optical interfaces.

Page 28: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 5 MIB Supported

Raisecom Technology Co., Ltd. 21

MIB Private

or

RFC MIB

Supports Description

RAISECOM-

FANMONITOR-

MIB

private All groups The MIB module for fan parameter

monitoring.

RAISECOM-

POWERMONITO

R-MIB

private All groups The MIB module for power parameter

monitoring.

RAISECOM-

SYSTEM-MIB

private All groups The MIB module for CPU, memory,

voltage, temperature monitoring.

SWITCH-

PORTMIRROR-

MIB

private rcMirrorToPort,rcPortMirrorEnable

,rcIngressMirrorPorts,rcEgressMirr

orPorts

The MIB module for port mirror.

RAISECOM-

EXTLOOPBACK-

MIB

private All groups The MIB module for L2/3 port loopback.

SWITCH-

CPUPRO-MIB

private All groups The MIB module for the Configuration of

threshold actions if packets are beyond the

threshold to protect the CPU.

SWITCH-CCP-

MIB

private All groups The MIB module for management of CPU

cache traffic and upload.

LLDP-PRI-MIB private All groups The MIB module for LLDP, as a

complementary to standard LLDP MIB.

LLDP-MIB IEEE802.1ab All but

lldpRemUnknownTLVTable and

lldpRemOrgDefInfoTable

Management Information Base module for

LLDP configuration, statistics, local

system data and remote systems data

components

RAISECOM-

RNDP-MIB Private All groups The MIB module for Raisecom Neighbor

Discovery Protocol.

RAISECOM-

RTDP-MIB Private All groups The MIB module for Raisecom Topology

Discovery Protocol.

RAISECOM-

RCMP-MIB Private All groups The MIB module for Raisecom Cluster

Management Protocol.

RAISECOM-

KEEPALIVE-MIB

private All groups The MIB module for SNMP keepalive

messages.

Page 29: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 5 MIB Supported

Raisecom Technology Co., Ltd. 22

MIB Private

or

RFC MIB

Supports Description

DISMAN-PING-

MIB

rfc4560 All groups The Ping MIB (DISMAN-PING-MIB)

provides the capability of controlling the

use of the ping function at a remote host.

DISMAN-

TRACEROUTE-

MIB

rfc4560 All groups The Traceroute MIB (DISMAN-

TRACEROUTE-MIB) provides access to

the traceroute capability at a remote host

SWITCH-RMON-

MIB

private All groups The MIB module for RMON statistics,

event, history. The Alarm group is same as

that in RFC1757.

RMON-MIB rfc1757 Statistics ,event, history, alarm

group

The MIB module for managing remote

monitoring device implementations

RAISECOM-SSH-

MIB

private All groups The MIB module for SSH key and SSH

session management.

RAISECOM-

UPGRADE-

MANAGEMENT-

MIB

private All groups The MIB module for online upgrading.

RAISECOM-

COMMON-

MANAGEMENT-

MIB

private All but raisecomNotificationGroup The MIB module for basic management,

such as file system and time, ETC.

SWITCH-

MULTISYS-MIB

private All groups The MIB module for multi system boot.

RAISECOM-

SCHEDULE-MIB

private All groups The MIB module for command

periodically execution.

RAISECOM-

SYSLOG-

SERVICE-MIB

private All groups The MIB module for system logging.

RAISECOM-

ALARM-MGMT-

MIB

private All groups The MIB module for ALARM, as a

complementary to ALARM-MIB.

Page 30: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 5 MIB Supported

Raisecom Technology Co., Ltd. 23

MIB Private

or

RFC MIB

Supports Description

ALARM-MIB rfc3877 All groups are read-only The MIB module describes ITU Alarm

information as defined in ITU

Recommendation M.3100 [M.3100], X.733

[X.733] and X.736 [X.736]

ITU-ALARM-MIB rfc3877 All groups are read-only The MIB module for a generic solution to

model alarms and to store the current list of

active alarms.

NOTIFICATION-

LOG-MIB

rfc3014 All groups are read-only The MIB module for logging SNMP

Notifications, that is, Traps and Informs.

SWITCH-SNMP-

MIB

private All groups The MIB module for SNMP communities.

SNMP-

FRAMEWORK-

MIB

rfc2571 All groups The SNMP management architecture MIB

including SNMP engine.

SNMP-MPD-MIB rfc2572 All groups The MIB for SNMP message processing

and dispatching

SNMP-

NOTIFICATION-

MIB

rfc2573n All groups The MIB for SNMP notification and its

filter.

SNMP-TARGET-

MIB

rfc2573t All groups The MIB module for SNMP host.

SNMP-USER-

BASED-SM-MIB

rfc2574 All groups The management information definitions

for the SNMP user-based security model.

SNMP-VIEW-

BASED-ACM-

MIB

rfc2575 All groups The management information definitions

for the view-based access control model

for SNMP.

SNMPv2-MIB rfc1907 All groups The management information definitions

for device system information and SNMP

packet statistics.

Page 31: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 5 MIB Supported

Raisecom Technology Co., Ltd. 24

MIB Private

or

RFC MIB

Supports Description

SWITCH-

SYSTEM-MIB

private rcSwitchInformation

rcTelnetMaxSessions

rcTelnetAcceptPorts

rcMacAgingTime

stormcontrol based on port

flowcontrol based on port

mac learning based on port

duplex and speed

port admin and operational status

rcMaxAllowedFrameLength

rcDlfForwardingEnable

rcArpAgingTime

rcMacTrapEnable

rcMacMoveEnable

rcMacMoveLastPortIndex

rcMacMoveLastMacaddress

rcMacMoveLastVlan

The MIB module for system information,

such as device version, telnet

configuration, MTU, storm control,

flowcontrol, MAC learning, port

administration and so on.

RAISECOM-

L3Mib.mi2

private rcL3IpStatic group The MIB module for staticIPv4 routing.

RAISECOM-IP-

BASE-MIB

private All groups The MIB module for Layer 3 IP

information.

RFC1213-MIB RFC1213 ipForwarding

ipAddrTable

ipNetToMediaTable(ARP)

The management information definitions

for standard IP address and ARP.

SWITCH-SNTP-

MIB

private rcSntpClient group The MIB module for SNTP client.

RAISECOM-NTP-

MIB

private All groups The MIB module for NTP client.

Page 32: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 5 MIB Supported

Raisecom Technology Co., Ltd. 25

MIB Private

or

RFC MIB

Supports Description

RAISECOM-QOS-

MIB

private raisecomQosStatistics;

raisecomQosTrafficClass group

excluding

rcQosServicePolicyEgressTable,

rcQosCosServicePolicyTable,

rcQosVlanPolicyTable,

rcQosCosPolicyTable;

rcQosPortCfgTable

rcQosPortSchedulerQueueTable

rcQosPortWredTcpConfigTable

rcQosLocalPrioMappingTable

rcQosPortShapingTable

rcQosPortCosMappingTable

rcQosPortTosMappingTable

rcQosPortDscpMapingTable

rcQosMappingCosRemarkTable

rcQosMappingCosToPriTable

rcQosMappingTosToPriTable

rcQosMappingDscpToPriTable

rcQosMappingDscpMutationTable

rcQosBandwidthPortTable

rcQosBandwidthVlanTable

rcQosBandwidthCosTable

The MIB module for QoS, including

WRED, mapping, shaping, policy, and

bandwidth.

SWITCH-FILTER-

MIB

private All groups The MIB module for access list filter and

statistics.

SWITCH-

L3FILTER-MIB

private All groups The MIB module for access list filter on

layer 3 interface.

RAISECOM-ACL-

MIB

private All groups The MIB module for IPv4, IPv6, MAC,

user-defined access list.

RAISECOM-PAE-

MIB

private All groups The MIB module for Dot1x, same as

IEEE8021-PAE-MIB.

Page 33: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 5 MIB Supported

Raisecom Technology Co., Ltd. 26

MIB Private

or

RFC MIB

Supports Description

RAISECOM-

DOT1X-MIB

private All groups The MIB module for Dot1x, as a

complementary to IEEE8021-PAE-MIB.

IEEE8021-PAE-

MIB

IEEE802.1x dot1xPaeSystem,dot1xAuthConfig

Table,dot1xAuthStatsTable

The MIB module

for Dot1x

authentication.

RAISECOM-

USER-

MANAGEMENT-

MIB

private All groups The MIB module for user login and

management through radius/tacacs+.

RAISECOM-

PPPOEAGENT-

MIB

private All groups The MIB module for pppoe+ information

and statistics.

DHCP-OPTION-

MIB

private All groups The MIB module for DHCP option

configuration, including option82.

DHCP-

SNOOPING-MIB

private All groups The MIB module for DHCPv4 and

DHCPv6 snooping and binding table.

RAISECOM-

IPSOURCEGUAR

D-MIB

Private All groups The MIB module for IP source guard.

SWITCH-DAI-

MIB Private All groups The MIB module for dynamic ARP

inspection.

RAISECOM-

MCAST-MIB Private raisecomMcastScalar

raisecomMcastL2

The MIB module for static multicast

address configuration.

RAISECOM-

IGMPL2-MIB Private raisecomIgmpBase

raisecomIgmpSnooping

raisecomIgmpMvr

raisecomIgmpProxy

raisecomIgmpFilter

raisecomIgmpVlanCopy

The MIB module for IGMP snooping,

Multicast VLAN Register, IGMP proxy,

IGMP filter.

RFC2737-MIB rfc2737 entPhysicalTable The MIB module for representing multiple

logical entities supported by a single

SNMP agent.

Page 34: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 5 MIB Supported

Raisecom Technology Co., Ltd. 27

MIB Private

or

RFC MIB

Supports Description

RAISECOM-

PERF-MIB

private All groups The MIB module for performance

management.

SWITCH_SERVIC

E_MIB

private All groups Description of Carrier Ethernet Service

manage object.

RAISECOM-

REMOTE-

MANAGEMENT-

LOCAL-MIB

private All groups The MIB module defining objects for

remote management on local devices.

Page 35: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 6 Feature Evolution

Raisecom Technology Co., Ltd. 28

6 Feature Evolution

6.1 Version REAP1.2.514 Support making complex classified traffic enter EVC based on MAC address, IP address,

or TCP/UDP port umber.

Support making classified traffic enter EVC based on L2CP.

Support bandwidth guarantee based on traffic of previous types.

Support Y.1564 test based on traffic of previous types.

Support statistics of packets based on traffic of previous types.

Support trust DSCP, support Layer 3 packets to enter queues by DSCP, and support

Layer 2 packets to enter queues by CoS.

Support cos-remark in the egress direction.

Support configuring CoS in the VLAN mapping command.

Support IPv6 ND functions.

Support IPv6 default gateway.

Support IPv6 direct connection and host route forwarding.

Support IPv6 telnet.

Support IPv6 uploading and downloading (FTP/TFTP/SFTP).

Support IPv6 snmp.

Support IPv6 DHCP (client\snooping\relay\server).

Support Ipv6 Source guard.

Support IPv6 ping.

Support IPv6 traceroute.

Auto-Provisioning supports that it does not save the configuration file upon any error in

loading the configuration file.

Auto- Provisioning supports checking the IP address and default gateway assigned by the

DHCP server in loading the configuration file.

Auto- Provisioning is added to the Syslog.

Support MIB of cause to Auto-Provisioning failure.

Support MIB of the address of the TFTP server.

Support configuring the Raisecom DHCP server with a higher priority than the DHCP

server of another vendor.

Page 36: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 6 Feature Evolution

Raisecom Technology Co., Ltd. 29

Support monitoring the memory.

Support memory alarms.

CFM supports configurable expiration time and sending interval for unicast LB packets.

The number of default unicast LB packets is changed from 5 to 3. Displaying RTT result

is supported.

The level of the MIP manually created in CFM is fixed to the level of the MA.

CFM supports configuring the frame length of LT packets.

L2CP distinguishes LACP, LAMP, OAM, and ESMC of slow protocol frames.

Supporting concurrent statistics is added to the forward action.

SLA supports MEF36 configuration table.

SLA supports Y1731 SLM packet test.

The 1000 Mbit/s electrical interface supports cable diagnosis.

Support copying packets to be sent to the CPU to the out-of-band interface.

SSH supports connection authentication through TACACS+.

Support displaying neighbor information in manual mode.

SSH supports connection authentication through TACACS+.

User-defined circuit id is added in PPPoE and DHCP Snooping.

Support the L3 and L4 Y.1564 test (for RAX700 Series only).

Support G.711 voice, G.723 voice, G.729 voice, video(MPEG-2) Y.1564 test (for

RAX700 Series only).

Y.1564 supports L3 packet loopback (for RAX700 Series only).

Y.1564 supports performance test of configuring LB test frames (for RAX700 Series

only).

Y.1564 supports performance test of configuring LB test frames without passing the UNI

interface.

Y.1564 supports in-service test (for RAX700 Series only).

Y.1564 supports configuring the range of frame length for flows (for RAX700 Series

only).

Y.1564 supports conducting loopback of multiple service flows (for RAX700 Series

only).

Support transparent transmission Y.1564 test, namely, the Y.1564 configuration test with

parameters such as bandwidth not configured locally (for RAX700 Series only).

6.2 Version REAP 1.2.311( 2900)/1.2.315(RAX700)/1.2.279(2100)

The problem is solved that MSTP does not support LAG interfaces.

Setting source mirroring ports in both the ingress and egress direction is newly supported.

The failover action upon blocking interface VLAN is added.

Page 37: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 6 Feature Evolution

Raisecom Technology Co., Ltd. 30

6.3 Version REAP 1.2.265(3000G-1)/1.2.279(3000G-2) Support the function of ARP

Support IPV4 static routing functions

Support OSPFv2 function

Support the function of VRRP

6.4 Version REAP 1.2.234(2900)/1.2.241(RAX700)/1.2.225(2100)

SLA and service supports SLM test.

The problem is solved that the NNI does not support supports 128 Layer 2 loopback

rules.

A mode for authenticate TACACS+ user password is added.

The problem is solved that response to 256 SLA operations fails.

A feature that 128 IP interfaces are supported is added.(For 2900 Series only)

6.5 Version REAP 1.2.206(2900)/1.2.208(RAX700/1.2.205(2100)

Globally enabling/disabling bandwidth guarantee is supported. Bandwidth guarantee is

globally enabled by default.

The range of cos-label changes from 1–8 to 1–7.

The system working LED changes:

On/Off: the system is working improperly.

Slow blinking: every 10s. It is the factory settings.

Blinking: every 2s. Management or configuration is done or the configuration file is

loaded.

Fast blinking: every 60ms. The configuration file is being loaded or Auto-Provisioning

fails.

The link aggregation interface is added to the RMON statistics MIB.

The service MIB is modified to rank in descending order of character string.

The rate limit based on dual Tag is modified.

Y.1564 supports configuring CoS remark test on the NNI interface.(For RAX700 Series

only)

6.6 Version REAP 1.2.66(2900)/1.2.47(RAX700)/1.2.39(2100) SLA performance statistics supports current statistics. A new table

rcServiceFarEndPointCosLabelCurrentTable is added.

Page 38: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 6 Feature Evolution

Raisecom Technology Co., Ltd. 31

PPPoE can work on user VLANs.

The information of invalid DHCP ACK packet is not written into the dhcp snooping

binding table.

RFC2233 supports the port-channel port.

The ifAlias feature of RFC2233 supports the Combo interface.

CIR/EIR is added into the flow statistics table rcPerformancePortVlanCurrentTable

which is based on Port+VLAN+COS.(For RAX700 Series only)

The flow statistics table rcPerformanceVlanCosCurrentTable based on VLAN+COS is

added.(For RAX700 Series only)

When the ISCOM2924GF manages the RC552 for power-on configuration, it supports

sending VLAN configurations.(For 2900 Series only)

The enable authentication operation for TACACS+ and RADIUS users supports per user

mode.

6.7 Version REAP 1.2.28(2900)/1.2.24(RAX700) The enable authentication operation for TACACS+ and RADIUS users supports per user

mode.

The private tables rcSlaLatestTable and rcSlaStatisticTable of the SLA module are added.

The maximum number of peer VLANs for the L2CP module is modified to the

maximum number of physical interfaces.

The problem is fixed that REAP1.2.4 does not support ISCOM2924GF-4GE

upgrade.(For 2900 Series only)

6.8 Version REAP1.2.4(2900/RAX700/2100) Inter-device interface backup is added.

Auto-provisioning at Layer 3 is added.

Service-based SLA, loopback, and Y.1564 are added.

Cluster feature is removed.

CFM supports port-channel port, and supports showing and deleting errored database.

The bandwidth guarantee profile supports the Description field.

Rate limiting in QoS policy supports ingress rate limiting based on IP address.

SLA supports configuring the maintenance window and threshold profile based on

device, adding flexible indexes to LM test, and viewing configuration profile.

The SNMP interface supports Layer 3 Dying Gasp alarms.

The hardware monitoring module supports configuring monitoring polling period.

ARP supports probe times before aging. The mode for displaying ARP information is

changed from IP address-based to port-based.

Static routing supports configuring default management distance and displaying routing

information.

The rcLldpStandard of the MIB table in the LLDP module is changed from

1.3.6.1.4.1.8886.6.1.57.1 to 1.0.8802.1.1.2, and is renamed as lldpMIB.

Page 39: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 6 Feature Evolution

Raisecom Technology Co., Ltd. 32

Y.1564 supports the RFC2544 test, and Y.1564 test in ring networking environment and

dual-homing environment. It supports configuring the oscillating flow to pass the UNI

interface.(For RAX700 Series only)

6.9 Version REAP 1.1.641(2900)/1.1.664(RAX700) GVRP features are added.

Extended OAM supports digital diagnosis monitoring of the RC552-GE (D).(For 2900

Series only)

Extended OAM supports alarms on temperature, voltage, current, Tx power, and Rx

power. (For 2900 Series only)

6.10 Version REAP 1.1.608(2900)/1.1.624(RAX700) Replace the sla alarm setclear enable command with the sla alarm threshold enable

command.

Enable IP routing by default, and delete the command to enable/disable IP routing.

Support configuring the default No.1 and No.2 service distribution points through

CLI/MIB.

The Y.1564 performance test supports displaying past testing period. (For RAX700

Series only)

6.11 Version REAP 1.1.569 (2900)/1.1.574(RAX700 ) Support RFC4363q to read all MAC addresses.

CFM supports link aggregation port (does not correspond to change of link aggregation

member port. Each service instance supports only one link aggregation port).

Support MAC address drift inhibition and TRAP alarm, add MIB nodes:

rcMacTrapEnable, rcMacMoveEnable, rcMacMoveLastPortIndex,

rcMacMoveLastMacaddress, and rcMacMoveLastVlan, add TRAP node:

rcMacMoveVioTrap.

Increase the MAC address limit of the extension port from 255 to 1K.

Support faulty clearing alarm for Dying gasp of the peer device through OAM, support

local and peer linkFault alarm, and add TRAP nodes:

raisecomOamDyingGaspNormalTrap and raisecomOamLinkFaultNormalTrap.

Support skipping the enable step upon RADIUS/TACACS+ authentication and login,

and add a controllable command switch.

Support deleting both flash and memory information of the logging file concurrently.

Support 552-FE version B features of remote management for ISCOM2924GF-4C.

Add the feature of multicast VLAN copy. (For 2900 Series only)

Increase Y.1564 delay/jitter test time threshold from 100ms to 1000ms. (For RAX700

Series only)

Page 40: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 6 Feature Evolution

Raisecom Technology Co., Ltd. 33

6.12 Version REAP 1.1.545(2900)/1.1.539(RAX700) Bandwidth profile module enhancement

− Based on the MEF CE2.0 standard, add CF configurations to the bandwidth profile.

− Based on the MEF CE2.0 standard, apply the bandwidth profile to CoS Label instead

of PCP.

− Add a new feature: bandwidth profile can be applied to the link aggregation ingress

interface.

− Add a MIB node: rcQosBandwidthProfileCoupling.

Failover module enhancement

− Support RDI error-based failover.

− Add dual-homing (interface backup and link aggregation).

− Optimize the protection switching time.

Phy enhancement

− The Combo optical interface is preferred by default.

QinQ enhancement

− Support adding tag through CVLAN+PCP-based selective QinQ.

− Add the command used for processing Tag packets with priority.

− Add the MIB node: rcFlexibleQinQCVlanCos.

− Selective QinQ and VLAN translation support link aggregation interface.

VLAN enhancement

− VLAN 2 is not created by default. VLAN 2 is not used as the default cluster VLAN

anymore.

Upload and download enhancement

− Support Secure File Transfer Protocol (SFTP).

− Support Cyclic Redundancy Check (CRC).

− Support version check.

− Support scheduling.

− Support uploading files based on file names.

Out-of-band management interface enhancement

− By default, there is an IPv4 address.

− By default, support DHCP Server.

Command line enhancement

− Support configuring whether to send Trap when log in to or log out from the

Command Line Interface (CLI). In addition, add 2 MIB nodes:

raisecomUserLoginTrap and raisecomUserLogoutTrap.

− Support shutting down the Console interface through the CLI session.

Modified the property of NTP synchronization interval MIB node (rcNtpSysPoll) to RW.

Based on the RFC2737, MIB realizes the correspondence between the entPhysicalEntry

table and the physical properties.

Configuration and load enhancement

− Support saving 2 configuration files.

− Support selecting the configuration file.

Page 41: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 6 Feature Evolution

Raisecom Technology Co., Ltd. 34

− Support deleting the logging file.

Support specifying user password strength. Support both complex and weak simple

passwords.

Support loopback interface configuration mode. Support deleting/adding loopback

addresses in this mode.

CFM enhancement

− Support creating MIP.

− Support configuring priorities of MEP packets.

− Support configuring up to 500 MEPs.

− Support DOWN MEP automatically learning remote MAC addresses.

− Support DM/LM switch.

− Support configuring force RDI.

− Support setting UP MEP CCM sending interval to 3.3ms, 10ms, or 100ms.

− Modify the UP MEP remote discovery mode from dynamically-learned to statically-

configured.

− Add 5 MIB nodes: rcCfmMepExPduPriority, rcCfmMepExPmAdmin,

rcCfmMepExRdiAdmin, rcCfmMaNetMipAutocreateAdmin, and rcCfmMipExTable.

− When configuring UPMEP, you need to configure the SDP port. If not, it cannot find

the remote MEP.

Support link aggregation interface statistics.

Add the performance statistics feature that support counting the number of discarded

packets after bandwidth is performed.

Support VLAN FID.

Add the TACACS authentication feature. In addition, the enable step is skipped when

logging for TACACS authentication.

Support periodical scheduling of SLA measure. In addition, the scheduling period can be

controlled.

Add service oriented configuration features.

Modify the default Port Mode from default Access mode on all ports to default Access

mode on UNI Ports and default Trunk mode on NNI Ports. (For RAX700 Series only)

Y.1564 enhancement (For RAX700 Series only)

− Support multi-service test.

− Support UP MEP-based test.

− Support Jumbo Frame test.

− Support 512-byte packet when transmitting size-differentiated packets.

− Support enabling Y.1564 at the link aggregation interface.

− Modify the keyword of the command line "ethersam" to "ethernetsam".

6.13 Version REAP 1.1.150(2900)/1.1.147(RAX700) The length of CFM MA name is extended from 12 characters to 13 characters.

Delete the vlan port command, which is used by the ISCOM 2924GF-4C to manage the

RC552-GE. (For 2900 Series only)

Page 42: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 6 Feature Evolution

Raisecom Technology Co., Ltd. 35

6.14 Version REAP 1.1.123(2900)/1.1.120(RAX700) The MTU size is extended from 9 K to 12 K.

Add the show memory command, which is used to display current available memory of

the system software.

L2CP supports reporting L2CP packets of a specified VLAN to CPU on an interface.

L2CP supports processing Layer 2 control packets with undefined protocol types.

L2CP supports centralized processing of 5 Cisco private packets.

L2CP supports 3 default profiles defined in MEF.

Some MIB nodes are added to L2CP: rcL2cpPortVlanCfgTable,

rcL2cpPortVlanCfgEntry, rcL2cpPortVlanCfgPortIndex, rcL2cpPortVlanCfgVlanIndex,

and rcL2cpPortVlanCfgL2cpProcess.

The ISCOM2924GF-4C&4GE supports auto-provision. (For 2900 Series only)

Support DHCP Server and DHCP Relay. (For 2900 Series only)

The ISCOM RAX711 supports DC and AC single power model. (For RAX700 Series

only)

6.15 Version REAP 1.1.75(2900)/1.1.73(RAX700) Support configuring selective QinQ and VLAN mapping in aggregation group mode

Newly-added QinQ functions: discarding untagged packets, discarding mismatched

selective QinQ, and trusting inner CoS

Support configuring Gigabit self-adaptive SFP speed and duplex mode

Delete the speed 10000 command on a port

Newly-added MIB for the FanMonitor module: raisecomFanMonitorTrapSendEnable

Newly-added MIB for the VlanCfg module: rcPortRejectFrameType and

rcPortVlanMappingMissMode

6.16 Version REAP 1.1.50(2900)/1.1.48(RAX700) Telnet/SSH client uploadingprompts of downloaded files is added.

Support extending OAM RC552. (For 2900 Series only)

Support 10 Gbit/s electrical SFP. (For 2900 Series only)

6.17 Version REAP 1.1.34(2900)/1.1.13(RAX700) The SLA function to comply with MEF36 was added.

The PHY modular was optimized to support different SFPs in port.

The management VLAN command was removed and the customer VLAN command

was added.

L2 loopback feature was added.

The QinQ feature was optimized.

Page 43: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 6 Feature Evolution

Raisecom Technology Co., Ltd. 36

− The default CVLAN configuration parameter of basic QinQ was added.

− The function of selective QinQ was enhanced.

− Uni-directional VLAN translation was modified into bi-direction.

− The configuration of delete Selective QinQ based on Port and CVLAN was added.

The QoS feature was enhanced and the bandwidth configuration was simplified.

The VLAN XC feature was added.

The multisystem function was added.

The MIB node of RAM usage information was added.

The Auto-deployment function was added. (For RAX700 Series only)

The EtherSAM functionality complying with Y.1564 was added. (For RAX700 Series

only)

6.18 Version REAP 1.0.32(2900)/1.0.49(RAX700) LAG function was optimized.

The TACACS+ function was enhanced

− The configuration command of TACACS+ server port was added.

− The string of tacacs-server key can support especial characters, such as blank.

The function that the reboot configuration can be delayed going into effect was added.

The BPDU guard feature was added.

The PPPOE agent feature was added.

The Dot1x feature was added.

The CCP feature was added.

The function than the VLAN 1 can be removed in the Trunk port was added.

6.19 Version REAP 1.0.9(2900)/1.0.17(RAX700) The constraint of CIR and EIR in the QoS configuration was removed, and EIR can be 0.

The stability of Telnet function was enhanced.

The switch performance of G.8032 was optimized.

The switch performance of G.8031 was optimized.

The capability for electrical SFP of 10/100/1000 BASE-T self-adaption was enhanced

and it was allowed to configure the working rate as 100Mbps.

Radius functionality was enhanced, adding accounting information display in the result

of the command show radius-server.

The stability of TACACS+ primary and secondary servers switch was optimized.

The default time of device Start-up was changed to 2010/01/01-00:00:00.

6.20 Version REAP 1.0.1(2900/RAX700) L2CP enhancements were added.

Page 44: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 6 Feature Evolution

Raisecom Technology Co., Ltd. 37

"Show tech-support" command was added.

The entrance passport of the privilege user mode can be null.

The optical port was optimized to support the forcing of the line speed as 100M (USFP-

GE/AN-R 10/100/1000BASE-T SFP).

The TPID of Port was added.

The stability of management was enhanced.

If the VLAN of access mode port is not 1, the access VLAN will not include VLAN 1.

Page 45: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 7 Resolved Issue List

Raisecom Technology Co., Ltd. 38

7 Resolved Issue List

7.1 Version REAP1.2.514 The problem is solved that the APS time based on link aggregation is longer than 50ms.

The problem is solved that the static route corresponding to the out-of-band interface

does not take effect.

The problem is solved that CLI crashes after the no policer command is executed in

global configuration mode.

The problem is solved that EVC-based bandwidth guarantee in the ingress direction is

affected by discarded packets after the switchport vlan-mapping-miss discard command

is executed.

For the 2924GF-4C A.04、2924G-4C A.02、2948G-4C A.01、2948GF-4C A.03 and

2924GF-4GE A.02 product version, the problem is solved that interface initialization

causes the peer IBM server to switch improperly.

7.2 Version REAP 1.2.311( 2900)/1.2.315(RAX700)/1.2.279(2100)

The problem is solved that Layer 3 SLA test result is incorrect.

The problem is solved that VLAN mapping does not take effect in the egress direction of

sending packets by the CPU.

The problem is solved that static routing corresponding to the out-of-band management

interface does not take effect.

The problem is solved that the result of using the show OversizePkts command contains

negative numbers.

The problem is solved that the mapping of DAI entries with SIP, SMAC, and VLAN

does not take effect.

The problem is solved that the result of executing the no policer command causes the

device to crash.

The problem is solved that an overlong description of the interface causes the specified

SDP interface of the service module to be abnormal.

The problem is solved that reverse VLAN mapping does not take effect on some

interfaces of the ISCOM2948.(For ISCOM2948 only)

Page 46: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 7 Resolved Issue List

Raisecom Technology Co., Ltd. 39

The problem is solved that the Y.1564 test fails after link protection protocol is

configured.(For RAX700 only)

7.3 Version REAP 1.2.234(2900)/1.2.241(RAX700)/1.2.225(2100)

The problem is solved that the memory overflows in applying class-map.

7.4 Version REAP 1.2.206(2900)/1.2.208(RAX700/1.2.205(2100)

The problem is solved that the sla forever begin command fails to schedule SLA

operations when loading at two ends is asynchronous upon reboot.

The problem is solved that the CFM LT fails to interconnect the Huawei device and

Raisecom device.

The problem is solved that configuring the monitor port fails to take effect after enabling

port mirroring.

The problem is solved that banner configurations fail to be loaded.

The problem is solved that SNMP memory overflows upon walk MIB tree.

The problem is solved that service-policy applied on the port becomes invalid after the

policy enable command is used.

The problem is solved that the client prints syslog when not matching the server public

key.

7.5 Version REAP 1.2.66(2900)/1.2.47(RAX700)/1.2.39(2100) The unit of the MIB node rcQosBandwidthProfileCfgCIR is modified.

A problem is fixed that the bandwidth index GET of the service table rcServiceEndPoint

is 0.

The MEF36 configuration table mefSoamLmCfgMeasurementEnable supports the read

operation. A problem is fixed that the time in statistics table node is incorrectly displayed.

The MIB table lines of the LT operation result are modified.

7.6 Version REAP 1.2.4(2900/RAX700/2100) Configuring G.8031 and G.8032 on the deleted backup interface fails.

Interface backup and link aggregation fail to cooperate with each other.

When a Link Aggregation Group (LAG) is disabled, its member learns a MAC address.

After it is enabled, the MAC address is not deleted.

When a command is being executed or packets are kept being sent for a period, the

directly-connected device cannot be pinged through.

Page 47: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 7 Resolved Issue List

Raisecom Technology Co., Ltd. 40

The G.8032 switchover time of the port-channel-based port exceeds 50ms.

When the fan is powered off, no Trap message can be sent.

7.7 Version REAP 1.1.641(2900)/1.1.664(RAX700) Configurations of the SSH2 server cannot be loaded.

When the electrical interface of the downlink Combo interface is forced with high

priority and it is connected with the Ethernet cable, inserting an electrical SFP module

into the optical interface causes it to become Down.

Executing the service-policy tv ingress gigaethernet 1/1-4 command to load

configurations fails.(For RAX700 Series only)

7.8 Version REAP 1.1.608 (2900)/1.1.624(RAX700) The historical statistics of ICMP SLA delay operation scheduling is incorrect.

The alarms on the remote RC552 managed by the ISCOM2924GF-4C are abnormal.

If the action to be taken after LBD is discarding, the device goes out of control.

After the TCP stateful test, the bandwidth declines and the device crashes.

The Y.1564 test fails in selective QinQ environment. (For RAX700 Series only)

7.9 Version REAP 1.1.569(2900)/1.1.574(RAX700) In DHCP client lease agreement, modifying the system clock causes the starting time of

lease agreement abnormal.

When secure MAC module source is lost, MAC addresses stop aging occasionally.

Port backup switching time is longer than 70ms.

When the Up MEP is uplink connected through the link aggregation port, it fails to

discover the remote device.

7.10 Version REAP 1.1.545(2900)/1.1.539(RAX700) In selective QinQ, the bandwidth profile matches the inner VLAN on the egress interface.

Information discovered by DOWN MEP CCM is incomplete and the MAC address

learned by DOWN MEP CCM cannot be displayed.

The middleware cannot respond to the LT packet when only MIP is configured on it.

It always displays that packets are lost when testing SLA packet loss ratio.

Layer 3 packets are flooded to the CPU after hardware entries are deleted because ARP

is aged.

EIR is not set to 0 when configuring Policy without configuring EIR.

CPU utilization is suddenly increased in a short period after the switch runs for a while.

Page 48: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 7 Resolved Issue List

Raisecom Technology Co., Ltd. 41

Device management is influenced when the follow-up action of LBD detection is set to

discarding.

Solved Issue ESW00003888: EFM - Link fault does not work on interface port 25-28 in

ISCOM2924GF-4GE.

Solved Issue ESW00005516: FLOWCONTROL – Flow control does not work on

interfaces 25-28 in ISCOM2924GF-4GE.

After port security MAC module violates, if the number of source discarded MAC

addresses exceeds 200, they cannot be aged.

Solved Issue ESW00005524: Link-State-Trace – Channel groups could not be

configured as a Link-State-Trace downstream.

In Y.1564, statistics on packets, whose size is greater than 1518 bytes, is invalid. (For

RAX700 Series only)

7.11 Version REAP 1.1.150(2900)/1.1.147(RAX700) The mean value of jitter may be smaller than the minimum value in SLA statistics.

The session cannot be re-used after closing the configuration interface when logging into

the switch through PC Telnet to view dynamic statistics.

The burst value may be abnormal during interface traffic statistics.

100 Mbit/s or above traffic cannot be generated during 64-byteY.1564 test. (For RAX700

Series only)

The bootstrap name is displayed incorrectly after executing the show version command

on the ISCOM RAX711. (For RAX700 Series only)

The VLAN configuration mode display information is incorrect when the ISCOM

2924GE-4C manages the RC552GE(D). (For 2900 Series only)

7.12 Version REAP 1.1.123(2900)/1.1.120(RAX700) L2CP UNI interface cannot distinguish management BPDU packets from transparent

BPDU packets

The system crashes when the IP interface is configured.

7.13 Version REAP 1.1.75(2900)/1.1.73(RAX700) LACP interconnection between the switch and Cisco 3400E.

The default gateway does not take effect when the IP address of out-of-band interface

changes.

Fail to delete the default gateway after the IP address is deleted.

7.14 Version REAP 1.1.50(2900)/1.1.48(RAX700) Failed to load the configuration information of the SNMPv3 user after reboot.

Page 49: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 7 Resolved Issue List

Raisecom Technology Co., Ltd. 42

The specified password is invalid.

The overhead of Ping delay system is over great.

There is a problem about the SLA historical table.

Fail to display cluster member ARP.

There is a grammatical mistake in the prompt displayed during the software upgrade.

Bandwidth 900 Mbit/s speed is inaccurate.

LLCF causes a no shutdown problem and failover causes a configuration load problem.

The UNI electrical interface cannot Link UP when it is configured with force speed and

duplex.

CIR can be set to 0 for bandwidth profile.

Hierarchical bandwidth profile adopts MEF model.

CPU cannot send broadcast packets from Block ports.

When configured with 128 down MEP, CFM display improperly.

VLAN translation cannot take effect when configured selective QinQ is deleted from a

port.

L3 Dying Gasp trap can be sent through non-VLAN 1 and non-directly-connected

network.

Fail to acquire LLDP management address TLV.

The SYS LED is Blinking Green after the switch is booted without performing any

configuration.

Modify the abbreviated RAX711 port display from Ga to Gi.

ISCOM RAX711 cannot be managed due to memory leak of cluster packets. (For

RAX700 Series only)

Optimize Y.1564 result display. (For RAX700 Series only)

Switches cannot be managed due to memory leak of cluster packets. (For 2900 Series

only)

7.15 Version REAP 1.1.34(2900)/1.1.13(RAX700) Erroneous Fan alarm and outputted print information error.

The initial status of G.8032 would be incorrect, when the G.8032 function was used with

LACP function.

Failed to load the configuration of Loopback detection after reboot.

The system uptime will be rollback during 24 days.

When the ISCOM2110 accessed to switch in Dual-homing mode, some ping frame will

be lost.

There is no power monitor alarm when boot with only one power modular on board. (For

2900 Series only)

7.16 Version REAP 1.0.32(2900)/1.0.49(RAX700) There will have some conflict when UP MEP and DOWN MEP co-exist in a CFM

configuration.

Page 50: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 7 Resolved Issue List

Raisecom Technology Co., Ltd. 43

Changing of the port mode will cause OAM connection to be lost after creating 4k

VLAN.

The link state tracking will cause the port flapping.

Failed to load the configuration of EFM send cycle.

The show running information will incorrect after closing the MAC address learning

function.

The private Ethernet ring protocol can’t be close. (For 2900 Series only)

7.17 Version REAP 1.0.9(2900)/1.0.17(RAX700 There is something wrong when CFM function is used with G.8031 ELPS.

It will print threshold event syslog after OAM running a long time.

The SFP consultation process will cause the port to not become operationally up in some

situation.

It is error When remove the bundling relationship of DHCP snooping bundling table.

There is something wrong on the display of the last traceroute hop of CFM.

The packet statistics of a port may be inaccurate.

The configuration lost after LACP Mode changing.

7.18 Version REAP 1.0.1(2900/RAX700) The OAM may lose the remote MEP when configuration write and show running-config

commands.

Failed to load the configuration of L3 port TPID value.

NDP packet forwarding function issue.

There is some restriction on the configuration of the rate-limiting function.

Compatibility issue in the CFM process with G.8031, G.8032.

LACP interoperation between ISCOM and CISCO devices.

SSH command key authentication issue.

If electrical port is configured first on the combo port, the Optical port which be inserted

in 100M optical SFP does not become operational.

When the combo optical port is configured with a 1000M optical SFP and is forced to be

100M, the port does not become operational.

The QoS policy of IP priority failed to apply on the egress.

The DHCP snooping function affected the E-LMI trap function.

Page 51: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 44

8 CLI Command Changes

8.1 Version REAP1.2.514

8.1.1 Added new CLI commands

No. Format Remark

1 pppoeagent circuit-id (format|hex) STRING

2 pppoeagent circuit-id mac-format STRING

3 no pppoeagent circuit-id (format|hex|mac-format)

4 ip dhcp information option circuit-id (format|hex) STRING

5 ip dhcp information option circuit-id mac-format STRING

6 no ip dhcp information option circuit-id (format|hex|mac-format)

7 cos {0-7} drop

8 bootfile URL

9 no bootfile

10 ipv6 source binding A:B::C:D $portname $portnum

11 ipv6 source binding A:B::C:D vlan <1-4094> $portname $portnum

12 ipv6 source binding A:B::C:D HHHH.HHHH.HHHH $portname $portnum

13 ipv6 source binding A:B::C:D HHHH.HHHH.HHHH vlan <1-4094>

$portname $portnum

Page 52: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 45

No. Format Remark

14 no ipv6 source binding A:B::C:D

20 switchport vlan-mapping ip-access-list {0-399} add-outer <1-4094> [cos <0-

7>]

21 no switchport vlan-mapping ip-access-list {0-399}

22 switchport vlan-mapping mac-access-list {0-399} add-outer <1-4094> [cos <0-

7>]

23 no switchport vlan-mapping mac-access-list {0-399}

24 show switchport ($portname |$portname_c) $portlist vlan-mapping acl add-

outer

25 switchport vlan-mapping cvlan untag add-outer <1-4094> [cos <0-7>]

26 no switchport vlan-mapping cvlan untag

27 clear ipv6 neighbors

28 show ipv6 neighbors

29 ipv6 nd detect-times <1-30>

30 no ipv6 nd detect-times

31 ipv6 nd aging-time <1-1000>

32 no ipv6 nd aging-time

33 no arp detect-times

34 management-port ipv6 address A:B::C:D/M

35 no management-port ipv6-address A:B::C:D

36 show management-port ipv6-address

37 show ipv6 route [ detail ]

38 l2cp {stp|slow-protocol|dot1x|elmi|lldp|cisco|HHHH.HHHH.HHHH|all} cos cos

39 loopback l2-rule <1-128> smac HHHH.HHHH.HHHH [ethertype

HHHH ] [vlan <1-4094>]

Page 53: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 46

No. Format Remark

40 no loopback l2-rule {1-128}

41 loopback l3-rule <1-128> A.B.C.D [dscp <1-63>] mac HHHH.HHHH.HHHH

svlan <1-4094>[cvlan <1-4094>]

42 no loopback l3-rule {1-128}

43 frame type ethernet cfm-lb For RAX700

Series only

40 frame pattern crc For RAX700

Series only

41 no frame pattern For RAX700

Series only

42 frame type ip A.B.C.D mac HHHH.HHHH.HHHH [dscp <0-63>] For RAX700

Series only

43 frame type (tcp|udp|video) A.B.C.D <0-65535> <0-65535> mac

HHHH.HHHH.HHHH [dscp <0-63>] For RAX700

Series only

44 frame type voice A.B.C.D <0-65535> <0-65535> mac HHHH.HHHH.HHHH

(g711|g7231|g729)[dscp <0-63>] For RAX700

Series only

45 frame length pattern <64 - 12288> <64 - 12288> <64 - 12288> <64 -

12288> <64 - 12288> <64 - 12288> For RAX700

Series only

50 no frame length pattern For RAX700

Series only

51 ethernetsam start service {1-MAX_SERVICEPROFILE_NUM_STR}

performance in-service [duration (forever|<5-1440>)] For RAX700

Series only

8.1.2 CLI Command changes

New Format Old Format Remark

ping mep <1-8191> [count <1-1024>]

[size <1-9216>] [source <1-8191>]

[interval <0-600>] [timeout <2-10>]

ping mep <1-8191> [count <1-1024>]

[size <1-9216>] [source <1-8191>]

ping HHHH.HHHH.HHHH [count <1-

1024>] [size <1-9216>] [source <1-

8191>] [interval <0-600>] [timeout <2-

10>]

ping HHHH.HHHH.HHHH [count <1-

1024>] [size <1-9216>] [source <1-

8191>]

Page 54: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 47

New Format Old Format Remark

traceroute mep <1-8191> [ttl <1-255>]

[size <1-9216>] [source <1-8191>]

traceroute mep <1-8191> [ttl <1-255>]

[source <1-8191>]

traceroute HHHH.HHHH.HHHH [ttl <1-

255>] [size <1-9216>] [source <1-

8191>]

traceroute HHHH.HHHH.HHHH [ttl <1-

255>] [source <1-8191>]

no cache packet [$portname $portlist] no cache packet

[no] (ip|ipv6) verify source [no] ip verify source

[no] (ip|ipv6) verify source dhcp-

snooping

[no] ip verify source dhcp-snooping

[no] (ip|ipv6) verify source trust [no] ip verify source trust

show (ip|ipv6) source binding show ip source binding

(ip|ipv6) source binding dhcp-snooping

static

ip source binding dhcp-snooping static

[no] (ip|ipv6) source binding auto-update [no] ip source binding auto-update

show (ip|ipv6) verify source show ip verify source

ping ipv6 A:B::C:D [count <1-

65535>][size <0-9216>][waittime <1-

60>][ip <0-MAXSWNUMBER>]

ping ipv6 A:B::C:D [count <1-

65535>][size <0-9216>][waittime <1-

60>]

switchport vlan-mapping outer <1-

4094> translate <1-4094> [cos <0-7>]

switchport vlan-mapping outer <1-4094>

translate <1-4094>

switchport vlan-mapping outer <1-

4094> inner <1-4094> translate <1-

4094> <1-4094> [cos <0-7>]

switchport vlan-mapping outer <1-4094>

inner <1-4094> translate <1-4094> <1-

4094>

sla <1-65535> y1731-jitter remote-mep

<1-8191> level <0-7> svlan <1-4094>

[cos <0-7>][interval <1000-

60000>][size <64-9600>]

sla <1-65535> y1731-jitter remote-mep

<1-8191> level <0-7> svlan <1-4094>

[cos <0-7>][interval <1000-60000>]

sla <1-65535> y1731-jitter remote-mac

HHHH.HHHH.HHHH level <0-7> svlan

<1-4094>[cos <0-7>][interval <1000-

60000>][size <64-9600>]

sla <1-65535> y1731-jitter remote-mac

HHHH.HHHH.HHHH level <0-7> svlan

<1-4094>[cos <0-7>][interval <1000-

60000>]

ssh2 server authentication (password |

tacacs | rsa-key)

ssh2 server authentication (password | rsa-

key)

telnet A:B::C:D [ip <0-

MAXSWNUMBER>]

telnet A:B::C:D

download (bootstrap | system-boot |

startup-config) (ftp|sftp) (A.B.C.D

|A:B::C:D) USERNAME PASSWORD

FILENAME

download (bootstrap | system-boot |

startup-config) (ftp|sftp) A.B.C.D

USERNAME PASSWORD FILENAME

Page 55: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 48

New Format Old Format Remark

download startup-config (ftp|sftp)

(A.B.C.D |A:B::C:D) USERNAME

PASSWORD FILENAME

reservedevcfg

download startup-config (ftp|sftp)

A.B.C.D USERNAME PASSWORD

FILENAME reservedevcfg

download (bootstrap | system-boot |

startup-config) tftp (A.B.C.D |A:B::C:D)

FILENAME

download (bootstrap | system-boot |

startup-config) tftp A.B.C.D

FILENAME

download startup-config tftp (A.B.C.D

|A:B::C:D) FILENAME reservedevcfg

download startup-config tftp A.B.C.D

FILENAME reservedevcfg

upload (system-boot | startup-config|

logging-file) (ftp|sftp) (A.B.C.D

|A:B::C:D) USERNAME PASSWORD

FILENAME

upload (system-boot | startup-config|

logging-file) (ftp|sftp) A.B.C.D

USERNAME PASSWORD FILENAME

upload (system-boot | startup-config |

logging-file) tftp (A.B.C.D |A:B::C:D)

FILENAME

upload (system-boot | startup-config |

logging-file) tftp A.B.C.D FILENAME

upload FILENAME (ftp|sftp) (A.B.C.D

|A:B::C:D) USERNAME PASSWORD

FILENAME

upload FILENAME (ftp|sftp) A.B.C.D

USERNAME PASSWORD FILENAME

upload FILENAME tftp (A.B.C.D

|A:B::C:D) FILENAME

upload FILENAME tftp A.B.C.D

FILENAME

l2cp all (peer|discard|tunnel|forward-

statistics)

l2cp all (peer|discard|tunnel)

l2cp (stp|slow-

protocol|lacp|lamp|oam|esmc|dot1x|elmi|

lldp|cisco) (peer|discard|tunnel|forward-

statistics)

l2cp (stp|slow-protocol

|dot1x|elmi|lldp|cisco)

(peer|discard|tunnel)

l2cp HHHH.HHHH.HHHH

(peer|discard|tunnel|forward-statistics)

l2cp HHHH.HHHH.HHHH

(peer|discard|tunnel)

snmp-server host (A.B.C.D |A:B::C:D)

version (1|2c) NAME [udpport <1-

65535>]

snmp-server host A.B.C.D

version (1|2c) NAME [udpport <1-

65535>]

loopback mode (l1 | l2 |l3) loopback mode (l1 | l2 )

Page 56: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 49

8.2 Version REAP 1.2.311(2900)/1.2.315(RAX700)/1.2.279(2100)

8.2.1 Added new CLI commands

No. Format Remark

1 mirror source-port-list ingress $portname $portlist egress $portname $portlist

2 link-state-tracking group <1-MAX_GROUP> action block-vlan {1-4094}

$portname $portlist

8.3 Version REAP1.2.234(2900)/1.2.241(RAX700)/1.2.225(2100)

8.3.1 Added new CLI commands

No. Format Remark

1 sla oper-num y1731-pkt-loss slm remote-mep mep-num level level-id svlan

vlan-id [cos cos-id] [interval interval-num] [size value]

2 sla oper-num y1731-pkt-loss slm remote-mac HHHH.HHHH.HHHH level

level-id svlan vlan-id [cos cos-id] [interval interval-num] [size value]

3 [no]sla slm

4 ssh2 server authentication tacacs

8.3.2 CLI Command changes

New Format Old Format Remark

sla oper-num y1731-jitter remote-mep

mep-num level level-id svlan vlan-id

[cos cos-id] [interval interval-num][size

value]

sla oper-num y1731-jitter remote-mep

mep-num level level-id svlan vlan-id

[cos cos-id] [interval interval-num]

sla oper-num y1731-jitter remote-mac

HHHH.HHHH.HHHH level level-id

svlan vlan-id [cos cos-id] [interval

interval-num] [size value]

sla oper-num y1731-jitter remote-mac

HHHH.HHHH.HHHH level level-id

svlan vlan-id [cos cos-id] [interval

interval-num]

Page 57: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 50

8.4 Version REAP 1.2.206(2900)/1.2.208(RAX700)/1.2.205(2100)

8.4.1 Added new CLI commands

No. Format Remark

1 bandwidth (enable | disable)

8.4.2 CLI Command changes

New Format Old Format Remark

sla cos-label {0-7} sla cos-label {1-8}

cos-label <0-7> LABEL cos-label <1-8> LABEL

ethernetsam cos-label {0-7} ethernetsam cos-label {1-8} For RAX700

Series only

8.4.3 Removed CLI commands

No. Format Remark

1 set vlan <1-4094>

8.5 Version REAP 1.2.47(RAX700)

8.5.1 Added new CLI commands

No. Format Remark

1 show statistics vlan vlanlist [cos cos]

8.6 Version REAP 1.2.28(2900)/1.2.24(RAX700

8.6.1 Added new CLI commands

No. Format Remark

1 enable auth (default|bypass|user)

Page 58: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 51

8.6.2 Removed CLI commands

No. Format Remark

1 [no] bypass-enable (radius|tacacs+)

8.7 Version REAP1.2.4(2900/RAX700)

8.7.1 Added new CLI commands

No. Format Remark

1 alarm hwmonitor period<1-5>

no alarm hwmonitor period

2 show alarm hwmonitor period

3 show ethernet cfm errors database [level ]

4 clear ethernet cfm errors database [level ]

5 auto-provision tftp-server A.B.C.D

no auto-provision tftp-server

6 auto-provision rule [<80000-89999>[prefixFILENAME][postfixFILENAME]]

no auto-provision rule

7 bandwidth-profile<"BANDWIDTH_INDEX_MIN"-"BANDWIDTH_INDEX_MAX">descriptionWORD

no bandwidth-profile<"BANDWIDTH_INDEX_MIN"-"BANDWIDTH_INDEX_MAX">description

8 descriptionWORD (CMD_HCOS_NODE)

no description (CMD_HCOS_NODE)

9 descriptionWORD (CMD_HVLAN_NODE)

no description (CMD_HVLAN_NODE)

10 switchport peer-backup vlanlistvlanlist [mdMD-NAME] maMA-NAMElevel<0-

MAX_LEVEL>remote-mep<1- MAX_MEPID>

no switchport peer-backup

11 show switchport peer-backup [port<1-MAX_PORT>]

12 arp detect-times<1-30>

13 route distance { connected | static } distance

no route distance { connected | static }

14 route distance ospf{ internal | external } distance

no route distance ospf{ internal | external }

Page 59: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 52

No. Format Remark

15 show ip route summary

16 show ip route detail

17 show ip route ( connected | static | ospf )

18 show ip route A.B.C.D [ detail ]

19 show ip route A.B.C.D A.B.C.D [ detail ]

20 show ip route A.B.C.D longer-prefixes [detail]

21 show ip route A.B.C.D A.B.C.D longer-prefixes [ detail ]

22 Sla maintenance {start |stop}

23 Sla performence-tier<5-16>

Coslabel{1-8} delay<1-5000000>

Coslabel {1-8} jitter<1-5000000>

Coslabel {1-8} loss-rate<1-100000>

Coslabel {1-8} availability<1-100000>

DescriptionWORD

24 Show sla erformence-tier [profile-num]

25 Customer escription contact phone

Note: Support config mode

26 Sla maintenance start-timeHH:MM:SSstopHH:MM:SS

27 sla cos-label {1-8}

28 sla remote-mep {1-8191}

29 Sla performance-tier<1-16>

30 Sla start

31 Sla stop

32 Show sla maintenance

33 show service service-nameperformanceremote-mep<1-8191>

34 loopback ethertypeHHHH

35 loopback remote-mep {1-8191}

36 loopback (enable|disable)

37 ethernetsam flow-profile <1-10> For RAX700

Series only

Page 60: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 53

No. Format Remark

38 ethernetsam performance bandwidth<0-1048576> For RAX700

Series only

39 ethernetsam duration (forever|<5-1440>) For RAX700

Series only

40 ethernetsam remote-mep {1-8191} For RAX700

Series only

41 ethernetsamcos-label {1-8} For RAX700

Series only

42 ethernetsam configuration bypass uni (enable|disable) For RAX700

Series only

43 y1564 start (configuration| performance|both) For RAX700

Series only

44 y1564 stop For RAX700

Series only

45 rfc2544 start For RAX700

Series only

46 rfc2544 stop For RAX700

Series only

47 clear ethernetsam result For RAX700

Series only

48 Show service service-name (rfc2544|y1564) summary result For RAX700

Series only

49 Show service service-name remote-mep<1-8192>cos-label <1-8>

(rfc2544|y1564) result

For RAX700

Series only

50 description WORD

no description

For RAX700

Series only

51 configuration bypass uni (enable|disable) For RAX700

Series only

52 ethernetsam rfc2544 start servcie{1-MAX_SERVICEPROFILE_NUM_STR}

ethernetsam rfc2544 stop service

For RAX700

Series only

53 clear ethernetsam rfc2544 result service <1-

MAX_SERVICEPROFILE_NUM_STR>

For RAX700

Series only

54 show ethernetsam rfc2544 result service <1-

MAX_SERVICEPROFILE_NUM_STR>

For RAX700

Series only

Page 61: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 54

8.7.2 CLI Command changes

New Format Old Format Remark

service config filename rule [<80000-

89999> [prefix FILENAME][postfix

FILENAME]]

service config filename rule [<80000-

89999>]

show service config filename rule [<80000-

89999> [prefix FILENAME][postfix

FILENAME]

show service config filename rule

[<80000-89999>]

show arp $portname $portnum show arp ip<0 - MAX_SW_STR>

ip route ipaddress (prefix | mask) nexthop

[distance]

iprouteip-addressmask-lengthnext-hop-

ip-address [ preference ]

no ip routeipaddress (prefix | mask) nexthop no ip route ip-address mask-length next-

hop-ip-address

sla alarm Threshod (enable | disable) sla alarm setclear (enable | disable)

ethernetsam start service {1-

MAX_SERVICEPROFILE_NUM_STR}

(performance | both ) [duration (<5-

1440>|forever)

ethernetsam start service {1-

MAX_SERVICEPROFILE_NUM_STR}

(performance | both ) [duration<5-

1440>]

For RAX700

Series only

nni ($portname|$portname_c) $portnum

[($portname|$portname_c) $portnum]

nni ($portname|$portname_c) $portnum For RAX700

Series only

8.8 Version REAP 1.1.641(2900)/1.1.664(RAX700)

8.8.1 Added new CLI commands

No. Format Remark

1 gvrp (enable|disable)

Note: Support config mode

2 gvrp (enable|disable)

Note: Support interface mode

3 gvrp registration (normal|fixed|forbidden)

4 clear (gvrp | garp)$portname $portlist statistics

5 garp timer join <20-20000>

garp timer leave <60-20000>

garp timer leaveall <500-20000>

no garp timer (join|leave|leaveall)

6 show (garp | gvrp)

Page 62: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 55

No. Format Remark

7 show (garp | gvrp)$portname $portlist

8 show (garp | gvrp)$portname $portlist statistics

8.9 Version REAP 1.1.608(2900)/1.1.624(RAX700)

8.9.1 Added new CLI commands

No. Format Remark

1 sdp ($portname|$portname_c) $portnum [secondary]

2 no sdp [secondary]

8.9.2 CLI Command changes

New Format Old Format Remark

sla alarm (availabilitychange | threshold)

(enable | disable)

sla alarm (availabilitychange | setclear)

(enable | disable)

8.9.3 Removed CLI commands

No. Format Remark

1 [no] ip routing

8.10 Version REAP 1.1.569(2900)/1.1.574(RAX700)

8.10.1 Added new CLI commands

No. Format Remark

1 no telnet-server accept $portname $portlist

2 [no] bypass-enable (radius|tacacs+)

3 mac-address-table trap (enable|disable)

4 mac-address-table mac-move (enable|disable)

5 clear logging file

6 [no] igmp vlan-copy For 2900 Series

only

Page 63: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 56

No. Format Remark

7 [no] igmp vlan-copy ($portname|$portname_c) $portlist For 2900 Series

only

8 [no] igmp vlan-copy mcast-vlan<1-4094> group A.B.C.D [A.B.C.D] For 2900 Series

only

9 [no] igmp vlan-copy mcast-vlan <1-4094> group any For 2900 Series

only

10 show igmp vlan-copy interface

show igmp vlan-copy ($portname|$portname_c) $portnum

show igmp vlan-copy member [ ($portname|$portname_c) $portnum ]

show igmp vlan-copy member user-vlan <1-4094>

show igmp vlan-copy

show igmp vlan-copy vlan-group [mcast-vlan <1-4094>]

For 2900 Series

only

11 igmp vlan-copy static vlan <1-4094> group A.B.C.D ($portname|$portname_c)

$portnum copy-vlan-list {1-4094}

no igmp vlan-copy static vlan <1-4094> group A.B.C.D

($portname|$portname_c) $portnum copy-vlan-list

For 2900 Series

only

12 show igmp vlan-copy-table [count]

show igmp vlan-copy-table vlan <1-4094> [count]

For 2900 Series

only

8.10.2 CLI Command changes

New Format Old Format Remark

sdp ($portname|$portname_c) $portnum

no sdp ($portname|$portname_c)

$portnum

sdp $portname $portnum

no sdp $portname $portnum

sap ($portname|$portname_c) $portnum

[leaf]

no sap ($portname|$portname_c)

$portnum

sap $portname $portnum [leaf]

no sap $portname $portnum

service mep down mpid <1-

8191>($portname|$portname_c) $portnum

[priority <0-7>]

service mep down mpid <1-

8191>$portname $portnum [priority <0-

7>]

[no] service mip ($portname|$portname_c)

$portnum

[no] service mip$portname $portnum

mac-address-table threshold <1-1024> mac-address-table threshold <1-255>

threshold fd <0-1000000> threshold fd <0-100000> For RAX700

Series only

threshold fdv <0-1000000> threshold fdv <0-100000> For RAX700

Series only

Page 64: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 57

New Format Old Format Remark

mac-address-table threshold <1-1024> mac-address-table threshold <1-255> For RAX700

Series only

8.11 Version REAP 1.1.545(2900)/1.1.539(RAX700)

8.11.1 Added new CLI commands

No. Format Remark

1 link-state-tracking group <1-MAX_GROUP> upstream link-aggregation <1-MAX_LINK_GROUP_STR>

2 link-state-tracking group <1-MAX_GROUP> upstream port-backup

($portname|$portname_c) $portnum ($portname|$portname_c) $portnum

3 link-state-tracking group <1-MAX_GROUP> upstream flush-mac-signal

4 no link-state-tracking group <1-MAX_GROUP > upstream

5 no link-state-tracking group <1-MAX_GROUP >downstream

6 link-state-tracking group <1-MAX_GROUP> action send-flush-mac-signal

7 no link-state-tracking group <1-MAX_GROUP> action

8 link-state-tracking group <1- MAX_GROUP > trap (enable | disable)

9 show detail $portname $portlist

10 switchport vlan-mapping cvlan priority-tagged [cos<0-7>] add-outer <1-4094>[cos<0-7>] [translate <1-4094>|remove]no switchport vlan-mapping

cvlan priority-tagged [cos<0-7>]

Note: Support port-channel mode

11 upload FILENAME (ftp|sftp) A.B.C.D USERNAME PASSWORD

FILENAME[schedule-list<0-99>]

12 upload FILENAMEtftpA.B.C.D FILENAME[schedule-list<0-99>]

13 login-trap (enable |disable)

14 console (open |close)

Page 65: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 58

No. Format Remark

15 ntp poll-interval <6-10>

16 no ntp poll-interval

17 start-up (main|backup)

18 show startup-config selection

19 password check (simple |complex)

20 interface loopback <0-MAX_LB_STR>

21 service rdi (enable|disable) mep ({1-8191}|all)

22 service pm (enable|disable) mep ({1-8191}|all)

23 service mip auto-create (enable|disable)

24 [no] service mip$portname $portnum

25 aaa command authorize (enable|disable)

26 fid <1-4097>

27 management-port dhcp server (enable|disable)

28 show management-port dhcp server

29 (eline|elan|etree|eaccess) ID

no (eline|elan|etree|eaccess) ID

30 type (uni|inni|enni)

31 sdp vlan <1-4094>

no sdp vlan

sdp $portname $portnum

no sdp $portname $portnum

32 sap $portname $portnum [leaf]

no sap $portname $portnum

Page 66: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 59

No. Format Remark

33 far-end remote-mep<1-8191> SAP-ID

no far-end remote-mep<1-8191>

34 customer DESCRIPTION CONTACT PHONE

no customer

35 cos-label<1-8> LABEL

36 show service

show service SERVICE-NAME config

show service SERVICE-NAME

37 eee-auto(enable|disable)

show interface $portname $portlisteee-auto

For RAX700

Series only

performancestatisticsshortintervalbuckets<10-100>

no performancestatisticsshortintervalbuckets

For RAX700

Series only

performancestatisticslonginterval buckets<3-100>

no performancestatisticslongintervalbuckets

For RAX700

Series only

performancestatisticsfile(enable| disable) For RAX700

Series only

performancestatistics$portname $portlist [file] (enable|disable) For RAX700

Series only

performancestatisticsmanagement-port [file] (enable|disable) For RAX700

Series only

performancestatisticsvlanvlanlist [cos] [file] (enable|disable) For RAX700

Series only

performance statistics file (shortinterval|longinterval) (interface | vlan) period

period

no performance statistics file period (shortinterval|longinterval) (interface | vlan)

For RAX700

Series only

Page 67: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 60

No. Format Remark

show performancestatistics

show performance statistics interface $portname $portlistcurrent

show performance statistics interface management-port (current | history)

show performance statistics vlan{1-4094} (current | history)

show performance statistics interface $portname $portlist history

show performance statistics file

clear performance statistics history

show interface $portname $portlistvlan{1-4094} [cos<0-7>] statistics

show performance statistics object (interface | vlan)

For RAX700

Series only

8.11.2 CLI Command changes

New Format Old Format Remark

bandwidth-profile

indexcircircbscbs [color-aware]

bandwidth-profile

indexcircircbscbseireirebsebs [color-aware

[coupling]]

bandwidth-profile

indexcircircbscbs[eireirebsebs] [color-

aware]

bandwidth coslistcos-listbwp-index

Note: Cos-list means coslable-list.

bandwidth coslistcos-listbwp-index

Note: Cos-list means PCP in the frame.

bandwidth (ingress|egress)$portname $portnum vlan <1-4094>coslist{0-7}

Note: Cos-list means coslable-list.

bandwidth (ingress|egress)$portname $portnum vlan <1-4094>coslist{0-7}

Note: Cos-list means PCP in the frame.

no bandwidth coslistcos-list

Note: Cos-list means coslable-list.

no bandwidth coslistcos-list

Note: Cos-list means PCP in the frame.

bandwidth ingress ($portname |

$portname_c) $portnum bwp-index

bandwidth ingress $portname $portnum

bwp-index

bandwidth ingress ($portname |

$portname_c) $portnumbwp-

indexhierarchy-vlanhv-bwp-index

bandwidth ingress $portname

$portnumbwp-indexhierarchy-vlanhv-

bwp-index

no bandwidth ingress ($portname |

$portname_c)$portnum

no bandwidth ingress $portname$portnum

bandwidth ingress ($portname |

$portname_c)$portnumvlanvlanidbwp-

index

bandwidth

ingress$portname $portnumvlanvlanidbwp

-index

bandwidth ingress ($portname |

$portname_c)$portnumvlanvlanidbwp-

indexhierarchy-coshc-bwp-index

bandwidth ingress

$portname $portnumvlanvlanidbwp-

indexhierarchy-coshc-bwp-index

Page 68: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 61

New Format Old Format Remark

no bandwidth ingress ($portname |

$portname_c) $portnumvlanvlanid

no bandwidth ingress

$portname $portnumvlanvlanid

bandwidth ingress ($portname |

$portname_c)

$portnumvlanvlanidcoslistcos-list bwp-

index

bandwidth ingress

$portname$portnumvlanvlanidcoslistcos-

list bwp-index

no bandwidth ingress ($portname |

$portname_c)

$portnumvlanvlanidcoslistcos-list

no bandwidth ingress

$portname$portnumvlanvlanidcoslistcos-

list

show bandwidth ($portname |

$portname_c) $portlist

show bandwidth $portname$portnum

show bandwidth ($portname |

$portname_c) $portlistvlan [vlanlist]

show bandwidth

$portname$portnumvlanvlanid

show bandwidth-profile [index] show bandwidth-profile (all | index)

show hierarchy-cos-bandwidth profile [hc-

bwp-index]

show hierarchy-cos-bandwidth profile hc-

bwp-index

show hierarchy-vlan-bandwidth profile

[ hv-bwp-index]

show hierarchy-vlan-bandwidth profile hv-

bwp-index

show bandwidth-status $portname$portlist show bandwidth-status

$portname$portnum

link-state-tracking group <1-

MAX_GROUP>

link-state-tracking group upstream group-

id

link-state-tracking group <1-

MAX_GROUP> upstream cfm-mepid<1-MAX_MEPID_STR> [ma-name

MANAME]

link-state-tracking group GroupID

upstream cfm-mepidmep-id

link-state-tracking group <1-

MAX_GROUP> upstream elps-8031-link

<1-MAX_ELPS_LINK_STR>

link-state-tracking group GroupID

upstream elps-8031-link elps-id

link-state-tracking group <1-

MAX_GROUP>action modify-pvid<1-4094> $portname portlist

link-state-tracking processing modify-

pvidpvid

link-state-tracking group <1-

MAX_GROUP> action (delete-vlan |

suspend-vlan) <1-4094>

link-state-tracking group action delete-

vlan vlan-id

link-state-tracking group action suspend-

vlan vlan-id

link-state-tracking group <1-

MAX_GROUP> action flush-g8032 {1-

MAN_G8032_RING_STR}

link-state-tracking processing flush-g8032

ring-id

Page 69: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 62

New Format Old Format Remark

link-state-tracking group <1-

MAX_GROUP> action flush-ering{1-MAN_G8032_RING_STR}

link-state-tracking processing flush-

eringring-id

switchport vlan-mapping cvlan{1-4094}

[cos<0-7>] add-outer<1-4094> [cos<0-

7>] [translate <1-4094>|remove]

Note: Support port-channel mode

switchport vlan-mapping cvlan{1-4094}

add-outer <1-4094> [cos<0-7>] [translate

<1-4094>|remove]

no switchport vlan-mapping cvlan{1-

4094}[cos<0-7>]

Note: Support port-channel mode

no switchport vlan-mapping cvlan{1-

4094}

switchport vlan-mapping outer<1-4094>

translate <1-4094>

Note: Support port-channel mode

switchport vlan-mapping outer<1-4094>

translate <1-4094>

no switchport vlan-mapping outer {1-

4094}

Note: Support port-channel mode

no switchport vlan-mapping outer {1-

4094}

switchport vlan-mapping outer <1-

4094>inner <1-4094> translate <1-

4094><1-4094>

Note: Support port-channel mode

switchport vlan-mapping outer <1-

4094>inner <1-4094> translate <1-

4094><1-4094>

no switchport vlan-mapping outer {1-

4094} inner {1-4094}

Note: Support port-channel mode

no switchport vlan-mapping outer {1-

4094} inner {1-4094}

[no] mls qos queue <1-

MAX_QUEUE_STR> shaping

cir<MIN_SHAPER_RATE_STR-

MAX_SHAPER_RATE_STR>[cbs<MIN

_SHAPE_BURST_STR-

MAX_SHAPE_BURST_STR>]

pir< MIN_SHAPER_RATE_STR-

MAX_SHAPER_RATE_STR>

[pbs< MIN_SHAPE_BURST_STR-

MAX_SHAPE_BURST_STR>]

[no]mls qos queue <1-

MAX_QUEUE_STR> shaping

cir<MIN_SHAPER_RATE_STR-

MAX_SHAPER_RATE_STR>

[cbs< MIN_SHAPE_BURST_STR-

MAX_SHAPE_BURST_STR>]

eir< MIN_SHAPER_RATE_STR-

MAX_SHAPER_RATE_STR>

[ebs< MIN_SHAPE_BURST_STR-

MAX_SHAPE_BURST_STR>

mls qos queue <1-MAX_QUEUE_STR>

shaping <MIN_SHAPER_RATE_STR-

MAX_SHAPER_RATE_STR>

< MIN_SHAPER_RATE_STR-

MAX_SHAPER_RATE_STR>

no cluster vlan [$portname $portlist] no cluster vlan

Page 70: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 63

New Format Old Format Remark

download (bootstrap | system-boot |

startup-config) (ftp|sftp)

A.B.C.DUSERNAME PASSWORD

FILENAME[schedule-list <0-99>]

download (bootstrap | system-boot |

startup-config) ftp A.B.C.D USERNAME PASSWORD FILENAME

download startup-config (ftp|sftp) A.B.C.D

USERNAME PASSWORD

FILENAMEreservedevcfg[schedule-

list<0-99>]

download startup-config ftp A.B.C.D

USERNAME PASSWORD

FILENAMEreservedevcfg

download (bootstrap | system-boot |

startup-config) tftpA.B.C.D

FILENAME[schedule-list<0-99>]

download (bootstrap | system-boot |

startup-config) tftpA.B.C.D FILENAME

download startup-config tftpA.B.C.D

FILENAMEreservedevcfg[schedule-

list<0-99>]

download startup-config tftpA.B.C.D

FILENAMEreservedevcfg

upload (system-boot | startup-config|

logging-file) (ftp|sftp) A.B.C.D

USERNAME PASSWORD FILENAME

upload (system-boot | startup-config|

logging-file) ftp A.B.C.D USERNAME

PASSWORD FILENAME

service mep [up] mpid<1-

8191>($portname|$portname_c) $portnum

[priority <0-7>]

service mep [up] mpid <1-

8191>($portname|$portname_c) $portnum

service mep down mpid <1-

8191>$portname $portnum [priority <0-

7>]

service mep down mpid <1-

8191>$portname $portnum

service remote-mep{1-

8191}($portname|$portname_c) $portnum

service remote-mep{1-8191} $portname

$portnum

show interface ($portname | $portname_c)

$portlist statistics

show interface $portname $portlist

statistics

show interface statistics dynamic

($portname | $portname_c) $portnum

[detail]

show interface statistics dynamic

$portname $portnum [detail]

clear interface ($portname| $portname_c)

$portlist statistics

clear interface $portname $portlist

statistics

sla schedule {1-65535} life (<1-604800> |

forever)

Note: Support schedule mode.

sla schedule {1-65535} life (<1-604800> |

forever)

sla schedule {1-65535}

Note: Support schedule mode.

sla schedule {1-65535}

sla schedule {1-65535} life (<1-604800> |

forever) period <1-604800>

Note: Support schedule mode.

sla schedule {1-65535} life (<1-604800> |

forever) period <1-604800>

Page 71: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 64

New Format Old Format Remark

uni($portname|$portname_c) $portnum uni$portname$portnum For RAX700

Series only

nni($portname|$portname_c) $portnum nni$portname$portnum For RAX700

Series only

frame length single[<64-12288>] frame length single[<64-1518>] For RAX700

Series only

ethernetsam service <1-32> ethersam service <1-32> For RAX700

Series only

no ethernetsam service <1-32> no ethersam service <1-32> For RAX700

Series only

ethernetsamstart service {1-

32}configuration

ethersamstart service {1-32}configuration For RAX700

Series only

ethernetsamstart service {1-32}(performance | both) [duration<5-

1440>]

ethersamstart service {1-32}(performance |

both)[duration<5-1440>]

For RAX700

Series only

ethernetsamstop service ethersamstop service For RAX700

Series only

show ethernetsamservice[{1- 32}] show ethersamservice[{1- 32}] For RAX700

Series only

show ethernetsam result service

(configuration|performance)

show ethersam result service

(configuration|performance)

For RAX700

Series only

show ethernetsam result detail service <1-

32 >(configuration|performance)

show ethersam result detail service <1-

32 >(configuration|performance)

For RAX700

Series only

show ethernetsamstatistic service <1-32> show ethersamstatistic service <1-32> For RAX700

Series only

clear ethernetsamresultservice<1-

32>(configuration | performance)

clear ethersamresultservice<1-

32>(configuration | performance)

For RAX700

Series only

clear ethernetsam statistic service <1-32> clear ethersam statistic service <1-32> For RAX700

Series only

8.11.3 Removed CLI commands–linksTrack

No. Format Remark

1 no link-state-tracking group

2 link-state-tracking processing mode fault-action

3 no link-state-tracking processing flush-g8032

4 no link-state-tracking processing flush-ering

5 show link-state-tracking port-list port-list

Page 72: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 65

No. Format Remark

6 media priority (fiber | copper)

7 clear ethernet cfm remote-mep [level <0-7>]

8 clear ethernet cfm errors [level <0-7>]

8.12 Version REAP 1.1.150(2900)/1.1.147(RAX700)

8.12.1 CLI Command changes

New Format Old Format Remark

vlan (forbid | dot1q) vlan (forbid | dot1q| port)

service CSIID level <0-7>

Note: the length of CSIID is less than 14

service CSIID level <0-7>

Note: the length of CSIID is less than 13

8.13 Version REAP 1.1.123(2900)/1.1.120(RAX700)

8.13.1 Added new CLI commands

No. Format Remark

1 l2cp peer vlan <1-4094>

no l2cp peer vlan

2 l2cp HHHH.HHHH.HHHH (peer|discard)

no l2cp HHHH.HHHH.HHHH

l2cp profile (default1|default2|default3)

3 show memory [detail]

8.13.2 CLI Command changes

New Format Old Format Remark

system mtu<1522-12288> system mtu<1522-9216>

l2cp all (peer|discard) l2cp all (peer|discard|tunnel)

l2cp cisco (peer|discard|tunnel) l2cp (cdp|vtp|udld|pvst|pagp)

(peer|discard|tunnel)

Page 73: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 66

8.14 Version REAP 1.1.75(2900)/1.1.73(RAX700)

8.14.1 Added new CLI commands

No. Format Remark

1 fan-monitor trap send (enable | disable)

2 mlsqos trust cos inner

3 switchport reject-frame untagged

switchport reject-frame tagged

no switchport reject-frame

4 Switchportvlan-mapping-miss discard

no switchportvlan-mapping-miss

8.14.2 CLI Command changes

New Format Old Format Remark

speed (auto | 10 | 100 | 1000) speed (auto | 10 | 100 | 1000 | 10000)

8.15 Version REAP 1.1.34(2900)/1.1.13(RAX700)

8.15.1 Added new CLI Mode – ITU-T Y.1564

No. Command mode Remark

1 Add new ethersam service profile Mode

2 Add new ethersam flow profile Mode

8.15.2 Added new CLI commands

No. Format Remark

1 Switchportvlan-mapping outer <1-4094> inner <1-4094> translate <1-4094><1-4094>no switchportvlan-mapping outer <1-4094> inner <1-4094>

2 bandwidth-profile indexcircircbscbs [eireirebsebs] [color-aware]

no bandwidth-profile index

no hierarchy-cos bandwidth-profile hc-bwp-index

Page 74: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 67

No. Format Remark

3 hierarchy-cos bandwidth-profile hc-bwp-index

bandwidth coslistcos-listbwp-index

no bandwidth coslistcos-list

no hierarchy-vlan bandwidth-profile hv-bwp-index

4 hierarchy-vlan bandwidth-profile hv-bwp-index

bandwidth vlanlistvlan-listbwp-index

no bandwidth vlanlistvlan-list

5 bandwidth <ingress | egress>$portname $portnumbwp-index

no bandwidth <ingress | egress>$portname$portnum

6 bandwidth ingress $portname$portnumbwp-indexhierarchy-vlanhv-bwp-index

no bandwidth ingress $portname$portnum

7 bandwidth <ingress | egress>$portname$portnum vlanv lanid bwp-index

no bandwidth <ingress | egress> $portname$portnumvlanvlanid

8 bandwidth ingress $portname$portnum vlan vlanid bwp-index hierarchy-coshc-

bwp-index

no bandwidth ingress $portname$portnumvlanvlanid

9 bandwidth <ingress | egress>$portname$portnumvlanvlanidcoslistcos-listbwp-

index

no bandwidth <ingress | egress>$portname$portnumvlanvlanidcoslistcos-list

10 bandwidth dei (enable | disable)

11 bandwidth color-aware (enable | disable)

12 show bandwidth $portname$portnum

13 show bandwidth $portname$portnumvlanvlanid

14 show bandwidth-profile (all | index)

15 show hierarchy-cos-bandwidth profile hc-bwp-index

16 show hierarchy-vlan-bandwidth profile hv-bwp-index

17 show bandwidth-status $portname$portnum

18 show multisystem

19 multisystem select

20 clear slaoper-num statics

Page 75: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 68

No. Format Remark

21 Sla oper-num loss-rate-threshold loss-threshold

22 Sla oper-num delay-threshold delay-threshold

23 Sla oper-num jitter-threshold jitter-threshold

24 Sla oper-num availabilityavail-threshold

25 sla alarm {availabilitychange | setclear} {enable | disable}

26 show sla alarm configuration

27 show sla oper-num threshold

28 show sla oper-num current statistics

29 show sla oper-num avail-current statistics

30 show sla oper-num current bins

31 show sla oper-num avail-history statistic

32 show sla oper-num histoy bins

33 loopback mode {l1 | l2}

34 loopback rule smac HHHH.HHHH.HHHH [ethertypeHHHH ] [vlan<1-4094>]

35 loopback {enable | disable}

36 no loopback rule

37 show loopback [$portname$portlist]

38 show loopback statistics [ $portname $portlist ]

39 clear loopback statistics [$portname $portlist]

40 port-type {copper | fiber100 | fiber1000 | fiber10000}

41 show interface $portname$portlist port-type

Page 76: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 69

No. Format Remark

42 flow profile profile-number

cvlanvlan-id [ coscos-id ]

frame length { mix | single [ length ] }

frame type ethernet [ethertypeprotocol-number]

For RAX700

Series only

43 ethersam service service-number

circir [ eireir ]

coscos-id

destination mac mac-address

md level level-value

name word

nni$portname$portnum

performance bandwidth bandwidth

svlanvlan-id

threshold fdfd-threshold

threshold fdvfdv-threshold

threshold flrfir-threshold

threshold avail avail-threshold

uni$portname$portnum

flow-profile profile-number

For RAX700

Series only

44 ethersam start service service-list configuration For RAX700

Series only

45 ethersam start service service-list { performance | both} [ duration period] For RAX700

Series only

46 ethersam stop service For RAX700

Series only

47 clear ethersam statistic service service-number For RAX700

Series only

48 clear ethersam result service service-number {configuration | performance } For RAX700

Series only

49 show flow profile [ profile-number ] For RAX700

Series only

50 show ethersam service [ service-number ] For RAX700

Series only

51 show ethersam result service { configuration | performance} For RAX700

Series only

52 show ethersam result detail service service-number {configuration |

performance }

For RAX700

Series only

53 show ethersam statistic service service-number For RAX700

Series only

Page 77: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 70

No. Format Remark

54 auto-provision advertise { terminal | forward }

55 auto-provision advertise interval interval

56 auto-provision arp generation

57 auto-provision client { enable | disable }

58 auto-provision delete remote-device mac-address

59 auto-provision network segment

60 auto-provision $portname$portlist

61 auto-provision send trap { enable | disable }

62 auto-provision snmp-hostip-address

63 clear auto-provision statistics interface-ip-num

64 clear auto-provision statistics client

65 ip auto-provision { times times | forever }

ip auto-provision stop

no ip auto-provision

66 show auto-provision status [interface-ip-num]

67 show auto-provision remote-device [interface-ip-num] [ mac-address ]

68 show auto-provision client

8.15.3 CLI Command changes

New Format Old Format Remark

Switchport qinq dot1q-tunnel [default-

cvlan<1-4094>] Switchport qinq dot1q-tunnel

Switchport vlan-mapping cvlan {1-

4094} add-outer <1-4094> [cos<0-7>]

[translate <1-4094>|remove]

Switchport vlan-mapping cvlan {1-4094}

add-outer <1-4094>

no switchport vlan-mapping cvlan {1-

4094}

no switchport vlan-mapping vlan-mapping-

id

no switchport vlan-mapping add-outer <1-

4094>

Switchport vlan-mapping outer <1-

4094> translate <1-4094>

Switchport vlan-mapping { egress |

ingress } {1-4094} translate <1-4094>

no switchport vlan-mapping outer {1-

4094}

no switchport vlan-mapping { egress |

ingress } vlan-mapping-id

no switchportvlan-mapping { egress |

ingress } translate <1-4094>

Page 78: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 71

New Format Old Format Remark

show switchport $portname $portlist

vlan-mapping translate

show interface $portname $portlistvlan-

mapping { egress | ingress } translate

show switchport $portname

$portlistqinq

show switchportqinq

show switchport $portname $portlist

vlan-mapping add-outer

show interface $portname $portlist vlan-

mapping add-outer

Sla oper-num y1731-jitter { remote-mac

mac-address | remote-mep mep-id} level

level-id svlan vlan-id [cos cos-id]

[interval interval]

Sla oper-num y1731-jitter { remote-mac

mac-address | remote-mep mep-id } level

level-id svlan vlan-id [ cvlanvlan-id ] [ cos

cos-id ] [ interval period ] [ packets packets-

num ] [ dm]

Sla oper-num y1731-pkt-loss { remote-

mac mac-address| }level level-Id svlan

vlan-id [cos cos-id] [interval interval]

Sla oper-num y1731-pkt-loss { remote-mac

mac-address | remote-mep mep-id } level

level-id svlan vlan-id [ cvlan vlan-id ] [ cos

cos-id ] [ interval period ] [ packets packets-

num ]

sla y1731-jitter quick-input [level level-

id] [svlan vlan-id]

sla y1731-jitter quick-input [level level-id]

[svlan vlan-id ] [ dm ]

show sla oper-num result show sla { all | oper-num } result

show sla oper-num history statistic show sla { all | oper-num } statistic

customer-vlan {1-4094} mgmt-vlanadd<1-4094> { forward |

termination }

no customer-vlan {1-4094} mgmt-vlan remove <1-4094>

show customer-vlan show mgmt-vlan

8.15.4 Removed CLI commands

No. Format Remark

1 Slaoper-num y1731-echo { remote-mac mac-address | remote-mepmep-id } level

level-idsvlanvlan-id [ cvlanvlan-id ] [ coscos-id ] [ dm ]

2 sla y1731-echo quick-input [level level-id] [svlanvlan-id ] [ dm ]

Page 79: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 72

8.16 Version REAP 1.0.32(2900)/1.0.49(RAX700)

8.16.1 Added new CLI commands

No. Format Remark

1 cache packet [$portname$portlist]

2 cache packet { ip-access-list | mac-access-list | access-list-map } <0-100>

3 cache packet length { header | all }

4 cache packet buffer-size <512-MAX_CCP_BUF_STR>

5 cache packet buffer override

cache packet buffer override auto-upload times { <1-1000> | infinite}

cache packet buffer nooverride [auto-upload]

6 clear cache packet buffer

7 cache packet upload-server tftpA.B.C.D

cache packet upload-server ftp A.B.C.DUSERNAMEPASSWORD

cache packet upload [clear-cache]

8 show cache packet[$portname$portlist]

9 show cache packet summary order [start-order <1-65535> counter <1-65535>]

10 show cache packet summary time from <0-23><0-59><0-59> [<1-65535>]

11 show cache packet summary time last <1-65535>

12 show cache packet detail <1-65535>

13 show cache packet statistics (protocol | mac) global

show cache packet statistics (protocol | mac) $portname$portlist

show cache packet statistics (protocol | mac) vlan<1-4094>

14 clear dot1x $portname$portlist statistics

15 dot1x {enable | disable}

16 dot1x auth-control {authorized-force | unauthorized-force | auto}

17 dot1x auth-control {portbased | macbased}

18 dot1x reauthentication {enable | disable}

19 dot1x timer reauth-period value

20 dot1x timer tx-period value

21 dot1x timer supp-timeout value

22 dot1x timer server-timeout value

23 dot1x timer quiet-period value

Page 80: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 73

No. Format Remark

24 show dot1x $portname$portlist

25 show dot1x $portname$portliststatistics

26 show dot1x $portname$portlist user

27 show radius-server

28 pppoeagent {disable | enable} (interface mode)

29 pppoeagent {enable | disable} (config mode)

30 pppoeagent circuit-id INFO

31 pppoeagent circuit-id attach-string STRING

32 pppoeagent remote-id format {binary | ascii}

33 pppoeagent remote-id {switch-mac | client-mac}

34 pppoeagent trust

35 pppoeagent vendor-specific-tag overwrite {enable | disable}

36 show pppoeagent [$portname$portlist]

37 show pppoeagent statistic [$portname$portlist]

38 clear pppoeagent statistic [$portname$portlist]

39 spanning edge bpdu-guard {enable | disable} $portname$portlist

40 show reboot info

8.16.2 CLI Command changes

New Format Old Format Remark

reboot [now | in <1- 1440>] reboot [now]

tacacs-server key WORD

Note: Spaces and supported in the

configured WORD

tacacs-server key WORD

Note: Does not support spaces in WORD

tacacs-server [backup] A.B.C.D [auth-

port <1-65535>]

tacacs-server [ backup ] A.B.C.D

radius-key WORD

Note: Spaces are supported in the

configured WORD

radius-key WORD

Note: Does not support spaces in WORD

Page 81: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 8 CLI Command Changes

Raisecom Technology Co., Ltd. 74

8.17 Version REAP 1.0.1(2900/RAX700)

8.17.1 Added new CLI commands

No. Format Remark

1 show tech-support

2 l2cp {enable | disable}

3 l2cp-profile profile-number

4 description WORD

5 l2cp { stp | slow-protocol | dot1x | elmi | lldp | garp | pvst | cdp | all } { peer |

discard | tunnel }

6 l2cp profile profile-number

7 l2cp tunnel-terminal

8 l2cp dest-mac HHHH.HHHH.HHHH

9 clear l2cp statistics [$portname$portlist]

10 show l2cp-profile [profile-number]

11 show l2cp [$portname$portlist]

12 show l2cp statistics [$portname$portlist]

8.17.2 CLI Command changes

New Format Old Format Remark

mls double-tagging tpid HHHH mls double-tagging tpid HHHH

Page 82: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 9 Product Issue List

Raisecom Technology Co., Ltd. 75

9 Product Issue List

9.1 Issue ID: ESW00017452

Description: dying Gasp Trap does not support IPv6.

9.2 Issue ID: ESW00017782

Description: after the device learns NDP, it has to wait 20s to 30s before displaying NDP.

9.3 Issue ID: ESW00017783 Description: after the aging time is changed to 1 minute, the NDP table will be aged after 3 to

4 minutes.

9.4 Issue ID: ESW00017643

Description: if Layer 3 loopback is used on a Layer 2 network and the directly connected link to

the loopback device becomes Down, Layer 3 loopback will not take effect. In this case, Layer 2

loopback is recommended.

9.5 Issue ID: ESW00018455

Description: if bandwidth in the egress direction is configured, statistics of discarded packets on

the downstream device will fail.

9.6 Issue ID: ESW00018530 ESW00018610

Description: the traffic that has been filtered or denied by ACL can still learn MAC addresses.

Page 83: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 9 Product Issue List

Raisecom Technology Co., Ltd. 76

9.7 Issue ID: ESW00018569 Description: packets not in the IPSG binding table will be discarded, but can still learn MAC

address.

9.8 Issue ID: ESW00012501 Description: G.8031 does not support 1+1 unidirectional protection switchover.

9.9 Issue ID: ESW00012616 Description: when one of multiple instances is configured, selection of root bridge in other

instances may be incorrect.

9.10 Issue ID: ESW00012902 Description: when one end is configured to 10 Mbit/s in full duplex mode and the other end is

configured to 100 Mbit/s in full duplex mode, they communicate improperly.

9.11 Issue ID: ESW00013820 Description: SLA statistics about Down MEP based on port channel is incorrect.

9.12 Issue ID: ESW00006557 Description: G.8032 performs FS or MS to switch services to RPL. When RPL fiber is

plugged, services are interrupted for 5s.

Description: no trap is sent when the fan fails.

9.13 Issue ID:ESW00003196 Description: ERPS - In some extreme cases, the time of protection switching could slightly

exceed 50ms, between 60ms-70ms. (The sending of jumbo frames with both MAC address

and VLAN increased by degree with the line rate)

9.14 Issue ID:ESW00004403 Description: CFM – Down MEP does not work in native VLAN

Page 84: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Raisecom

Release Notes 9 Product Issue List

Raisecom Technology Co., Ltd. 77

9.15 Issue ID:ESW00004443 Description: LBD – When working in VLAN mode, LoopBack Detection may cause CPU

utilization to become high, if there are too many VLANs created.

9.16 Issue ID:ESW00004553 Description: IP source guard may not work in combination with QinQ together on the same

interface.

9.17 Issue ID:ESW00005179 Description: Security MAC, when enabling sticky security MAC configuration, some MAC

addresses could not be learned.

9.18 Issue ID:ESW00005151 Description: PHY – When using some copper SFPs modules (for instance, USFP-GE-01R or

USFP-FE/AN-R), port operations such as performing a port shutdown or a no shutdown

maybe cause port link flapping.

Page 85: REAP Release Notes - rnd.rajven.netrnd.rajven.net/firmware/raisecom/2924GF-4F/REAP Release Notes (V1.… · Raisecom Release Notes 2 Products Supported Raisecom Technology Co., Ltd

Address: Building 2, No. 28, Shangdi 6th Street, Haidian District,

Beijing, P.R.China.

Postal code: 100085 Tel: +86-10-82883305


Recommended