Download pdf - Willem EPROM Programmer Manual

5/25/2018 Willem EPROM Programmer Manual

1/13

- 1 - Willem EPROM Programmer PCB5.0C Manual

Website: www.ischip.cn Email: [email protected]

Willem EPROM Programmer Manual

Overview

Willem Eprom programmer can be use to

Upgrading, Programming BIOS chip, Repairing PC motherboard BIOS chip.

VCD, DVD, Color TV, Copier, Fax machine, Printer main board maintaining or reparing.

Car memory device code reading, writing

MCU development: programming for MCS-51 series, AVR series and PIC series MCU.

Programming support for over 1500 IC devices, includes EPROM , EEPROM , FLASH , PIC ,

AVR , MCS-51 , MCS-48, 27Cxx , 28Cxx 28Fxx , 29Fxx , AT29Cxxx , 24Cxx , 93Cxx ,

PIC16xxx ,DS12xx ,AT89Cxx , AT89Cx051 , AT25xxx , AT90Sxxx , EPROM16bit , 29Fx00 ,

28Fx00

New dual powered (USB/AC) Willem EPROM Programmer latest design PCB5.0C

*** The Latest Version Available ***

Features and Advantages:

Can program EPROM, EEPROM, FLASH Burner (Vpp 12.5V, 21V, 25V);

Supports CHIPS (EPROM, EEPROM, FLASH, I2C, PIC, MCS-51, AVR, 93Cxx, ISP) and more;

This hardware version (PCB5.0C) is more STABLE than version PCB3B;

It can program up to 20% faster than Willem EPROM Programmer (PCB3.5C) / (PCB4C) and 50%

faster than the PCB3B+;

Takes power from a USB port or from an optional external power supply (not supplied);

You can choose between Version PCB3B and PCB5.0 using jumper setting if required.

Latest Version 0.98D8 - adds extensive support for Winbond flash chips and PIC Micro family

This NEW PCB5.0C has adapters PLCC32 (supports 3.3V devices) and Firmware Hub /LPC on-board

Software Features :

Windows based programming software support 98 / ME / NT / 2000 / XP


2/13



Latest !! Software version 0.98D8 can run on The hardware PCB3.5/PCB4C/ PCB4.5C /

PCB5.0C only.

No support The hardware PCB3B, Enhanced Willem and Willem Ver.4 & Ver4.5

Software willem for PCB45C/ PCB5.0C version0.98D8 support for over PICs microchip morethan Software 0.97ja.

-. Add PIC microchip 12bit (FLASH memory)

PIC12F508/509 , PIC10F200/202/204/206 , PIC16F505 , PIC16F54/57

-. Add PIC18Fxxx

PIC18F242 , 18F248 , 18F252 , 18F258 , 18F442 , 18F448 , 16F452 , 16F458

PIC18F1220 , 18F2220 , 18F4220 , 18F1320 , 18F2320 , 18F4320

PIC18F6520 , 18F6620 , 18F6720 , 18F8520 , 18F8620 , 18F8720

PIC18F2331 , 18F2431 , 18F4331 , 18F4431

PIC18F6525 , 18F6621 , 18F8525 , 18F8621

PIC18F6585 , 18F6680 , 18F8585 , 18F8680

PIC18F2439 , 18F2539 , 18F4439 , 18F4539

PIC18F6410 , 18F8410 , 18F6490 , 18F8490

-. Add PIC18Fxxx

PIC18F2410 , PIC18F2420 , PIC18F2455

PIC18F2510 , PIC18F2515 , PIC18F2520 , PIC18F2525 , PIC18F2550 , PIC18F2585

PIC18F2610 , PIC18F2620 , PIC18F2680

PIC18F4410, PIC18F4420 , PIC18F4455

PIC18F4510 , PIC18F4515 , PIC18F4520 , PIC18F4525 , PIC18F4550 , PIC18F4585

PIC18F4610 , PIC18F4620 , PIC18F4680-. Add Find and edit value OSCCAL (PIC12F629/675 , PIC16F630/676)

-. Add Edit config at address 0x2008,0x2009 (PIC12F635/683 , PIC16F636/684/688 ,

PIC16F785)

-. Fixed Programming PIC all

-. Test on chip

PIC12F675 , PIC16F676 , PIC16F684 ,PIC16F767, PIC16F74

PIC16F872 , PIC16F876 , PIC16F877, PIC16F876A, PIC16F873A, PIC16F819

PIC16F84 , PIC16F84A , PIC16F628, PIC16F628A,

eprom PIC12C509JW , PIC16C505JW , PIC16C711JW , PIC16CE625JW

PIC18F458 , PIC18F4320 , PIC18LF258 , PIC18F4539 , PIC18F4431

-. Fixed Write/read/verify EEPROM 18F4550

-. Fixed Bug program 18Fxxx run on Windows XP/2000 (test PIC18F4539 ,

PIC18F2680 , PIC18F2431 , PIC18F258 ,

PIC18F4220 , PIC18F4550)

-. Add find OSCCAL 10Fx00, 12F50x, 12F6xx

(test PIC10F202, 12F509, 12F675)

-. Fixed Programm AT89C8253 (Want modify Adapter MCS-51) (test on AT89S8253)

Production control by an engineer who developed "Willem EPROM Programmer Version PCB3b

(Standard/Universal) "

and developed software Free (Now!! 0.97ja) , 0.97j , 0.97i+ , 0.98i , 0.97i , 0.97h , 0.97g


3/13



The package includes :

1.Device Programming EPROM, EEPROM, FLASH Burner (Vpp 12.5V,21V,25V)

2.Software willem (included in CD)

3.Manual using the Program Willem EPROM (included in CD)

4.Computer cable (DB25)

5.USB power cable

Willem Programmer Supported Device List

Supported Device List

Memory/MCU Model #

1.EPROM

27C64,27C128, 27C256,27C512,27C010,27C020, 27C040, 27C1001

M27C1001,M27C2001, M27C4001

27C080,M27C801,M87C257

(Fixed on 5V Vcc, and Vpp is adjustble among 12V,15V,21V,25V )

16 bit

EPROM(DIP40)(1-4Mbit)

27C1024 (27C210), 27C2048 (27C2002), 27C4096 (27C4002)

Eprom 16bit DIP40 adaptor is needed

16 bit

EPROM(DIP42)

(4-32Mbit)

M27C400(DIP40), 27C800, 27C160, 27C322

Eprom 16bit DIP42 adaptor is needed

2.Erasable EPROM

W27E512, W27E010, W27C010, W27C020, W27C040

SST27SF256, SST27SF512, SST27SF010, SST27SF020

MX26C4000

Vcc = 3.3-3.6V SST37VF512, SST37VF010, SST37VF020, SST37VF040

3.EEPROM

28C65, 28C64, 28C128, 28C256, 28C512, 28C010, 28C020, 28C040

M28C16A/17A (DIP28)28C16, XLS2816 (DIP24)

AT28C64B, AT28C256, AT28C512, AT28C010, AT28C020, AT28C040

4.FLASH Memory

28F64, 28F128, 28F256, 28F512, 28F010, 28F020

MX26C1000, MX26C2000, MX28F1000, MX28F2000

Am28F256A, Am28F512A, Am28F010A, Am28F020A

intel:

i28F001BX, 28F004, 28F008, 28F016

SST28SF040A, LE28F4001

29F64, 29F128, 29F256, 29F512, 29F010, 29F020, 29F040, 29F080

29F001,29F002, 29F004, 29F008, 29F016, 29F032

AT29C256, AT29C512, AT29C010A, AT29C020, AT29C040, AT29C040AW29EE512, W29EE011, W29EE012, W29C020(128),W29C040

PH29EE010(W29EE011)


4/13



ASD AE29F1008 (AT29C010), AE29F2008 (AT29C020)

AT49F512, AT49F010, AT49F020, AT49F040

SST39SF010, SST3S9F020, SST39SF040

AT49F001, AT49F002, AT49F008A

Am29F512, Am29F010, Am29F020, Am29F040.HY29F080

29F002, 29F002T, Pm29F002Twith

TSOP48 Adapter:Am29F400, Am29F800, 29F160, 29F320 (read/write byte mode)

HY29F200, HY29F400, HY29F800, AT49F2048A, AT49F4096A, AT49F8192A

with TSOP48

Adapter (Vpp12V):i28F200,i28F400, i28F800, i28F160 (TSOP48)

28F001(DIP32 or PLCC32)

with

TSOP48LV Adapter:29LV200, 29LV400, 29LV800, 29LV160, 29LV320 (read/write byte mode)

with Firmware

Hub/LPC

(PLCC32) adapter:

Firmware Hub:

82802AB, 82802AC, AT49LW040, AT49LW080

SST49LF002A, SST49LF003A, SST49LF004A, SST49LF008A

LPC flash:

SST49LF020, SST49LF040

5. Serial

(I2C)EEPROM

24C02, 24C04, 24C08, 24C16, 85C72, 85C82, 85C92

24C32, 24C64, 24C128, 24C256, 24C512 (allC/LC series)

PCF8572,8572, PCF8582, 8582, PCF8592, 8592

6.Microwire

EEPROM

8 mode:93C06, 93C46, 93LC46, 93C56, 93C57,

93C66, 93C76, 93C86,93C13,93C14

16 mode:AT59C11, AT59C22, AT59C13

CAT35C102, CAT35C104, CAT35C108

93C06A ,93C46X,93C56,93C66,93C76,93C86 (NS)

7.PIC embedded

MCU

Without 40Pin adaptor: 16C84, 16F84, 16F84A ,16F627,16F628,16F627A,16F628A,16F648A

16F818,16F819 12C508/A, 12C509/A, 12CE518, 12CE519, 16C505 16C620 16C621, 16C622, 16CE623,

16CE624, 16CE625, 16C710/711 16F630,16F676

With 40Pin adaptor:

16F870,16F871,16F872,16F873,16F874,16F874,16F876,16F877,16F873A,16F874A,16F876A,16F877A

with PIC embedded

MCU adapter:16F871,16F874,16F877, 16F870,16F872,16F873,16F876

8.SPI EEPROM

Atmel:AT25010,020, 040 (A8-A0)

AT25080, 160, 320, 640, 128, 256 (A15-A0)

ST:W95010....256, Microchip 25x010 - 25x640

25010,25020,25040

25C080,25C160,25C320,25C640,25C128,25C256,25C512

AT25HP256,AT25HP512

AT25HP1024

CAT64LCxxx (16 Data I/O)

CAT64LC010, CAT64LC020, CAT64LC040

9.Test

SRAM,Lossless

SRAM Function

DS1220,DS1225Y, DS1230Y/AB, DS1245Y/AB, DS1249Y/AB

6116, 6264, 62256, 62512, 628128


5/13



10. Atmel MCU

with AtmelAT89adapter

89 series:

Atmel:AT89C51,52,55, AT89LV51,52,55

AT89S8252 (8K+2K), AT89S53, AT89LS8252,AT89LS53

AT89C1051,AT89C2051,AT89C4051 (20pin)

AT89C51RC (32KB), AT89C55WD (6.2V)

SST89C54/58, SI89C52Intel:i87C51, i87C51FA, i87C51FB

i8xC51,i8xC52,i8xC54,i8xC58

90 series:

AT90S1200,AT90S2313

11. Atmel MCU

with AVR DIP40 adapter:AT90S8515 ,AT90S4414, ,AT90S4434, AT90S8535

with AVR DIP28 adapter:AT90S2333,AT90S4433

with Atmel AT89

PLCC44

adapter:

P8048AH, P8049AH,P8050AH, P8042AH (Vea = 12V)

P8041, P8042

OTP (read/verify/Progam)

P8748,P8749H,P8742H(Vea = 18V)

EPROM (read/verify/Progam)

D8748,D8749,D8742,D8741, D8742(Vea = 18V)

This multi-function programmer enhanced version has build-in FWH/LPC,PLCC32,P28F002BC adaptor, no needto buy

additional adaptor, it directly supportsIntel810,815,845 main board N82802AB,SST49LF002,SST49LF004 and 3.3V

MCU...


6/13



Installation and system settings

1Hardware structure introduced

Socket ZIFSeries 27, Series 28, Series 29, 39/49 series BIOS chip and chip PLCC

conversion of the Series Block, ATMEL 89 MCU conversion blocks.

ParallelBy cable Connected to the computer parallel port.

DIP socket24 series, PIC MCU chip, 25 series, 93 series of memory; ATMEL

AVR MCU chip conversion Block, PHILIPS MCU chip conversion blocks.

OutletUsed to connect power adapter.

8 DIP switch Series 27, Series 28, Series 29, 39/49 series BIOS chips, such as

reading and writing before the operation, the need for this switch to the appropriate

location. Specific location of the light display software.

9 JumperA small number of special chips, need to adjust jumper. (Jumper specific

method detailed in the first three jumper settings or software display)

10 LEDGreen LED that the programmer power state, said red LED chip Vpp power state,

yellow LED chip programming that state.

2Hardware Installation:

Installation steps are as follows:

1, shut down the computer power supply.

2, the end of the cable into the parallel port on the computer.


7/13



3, at the other end of the cable into the programming of the 25-hole outlet. Note:

The cable is directional, will not be able to insert anti-inserted.

4, USB cable into the computer on one end, the other end inserted on the programmer.

5, J10 short jumper to end VUSB.

At this time programming for the green power light should be lit, that the programmer

has been connected to power. Hardware connecting finished.

Note: 1, the computer's parallel port to the BIOS settings for the ECP or ECP

+ EPP;

2, the programmer to use the on-line cable is dedicated, can not be used

for other equipment, can not replace the other cables.

3Software installation:

Operation of setup.exe with a floppy disk installation process, will appear on

the screen to install the screen:

Click on the installation of "Next" button, select the default order on it, will be

the programmer's control procedures installed in C: \ Program Files \, and on the

desktop-generated programming for the shortcut Icon, double-click the shortcut icon,

you can run the programmer-control procedures.

5Hardware detection:

Launch control procedures, the procedures in the menu bar of the "Help" item,

click on "test hardware" items. If normal, a "Hardware present" tips. If not connect

power or right, there will be "hardware error: check power & connection" of the tips,

then you have to check carefully whether the programmer and computer connections,

and power is normal.

The programming instructions for use


8/13



1the menu bar:

The procedure screen, the first of the menu bar, the meaning is as follows:

file Open, save and exit .

edit Edit the data in the cache.

device Choose chips.

action Read; programming / testing; validity testing and empty check; erase; reader

configuration bit; programming targeted largest chip signature.

help Help text.

2Sidebar:

Left to right in the order

1Open the file

2Save the file

3Clear the cache of data

4Read out the data in the chip and saved to the cache

5Validation Program Data

6Chip blank check

7Read Electronic ID

8Read LockBit

9Corresponding hardware version PCB5.0C

10Program Chip

11Erase chip

3Window select button:

DeviceProgramming window. All the programming operation, are carried out under this

window.

Buffer Data Buffer

Test H/WProgramming Test

4The status bar

BIOS chip programmingSteps

1, manually select chip models;

2, in accordance with procedures showed that the DIP switch settings diagram, set

up DIP switches and other jumpers;

3, chip demand placed on diagram;

4, click the write button, to write the chip.

Write an intel 82802AB chip as an example:


9/13



1Chip select and set up:

First models to choose chips,

Two ways: 1, the menu bar "device" option to choose 2, chips selected area, press

the select button chip choice (Figure circle in the box that chip select button).

Chip parameters

Size&checksumChip capacity and data validation of the

buffer.

Shift&pattem adress Chip address range and the

highest addresses.

tWPWrite pulse width

tWCWrite delay time.

2DIP switch settings

According to the plans in the state of DIP

switches, the programmer DIP switch settings.

3Chips in:

Switch set up to determine chip position. The BIOS chip, 32 feet on the ZIP in

the socket. Special type of chip, the need to use the corresponding conversion, with

the choice of intel82802AB chip, suggesting that we need to FWH / LPC conversion Block,

as required, the chip FWH / LPC conversion blocks. Insert, attention should be paid

the same direction.

Dual-inline package insert ZIP chip socket, is the direction, the gap between

the chip upward direction;

Note:

1, procedures are displayed parameters of the chip, if there is no special

circumstances, does not require adjustment.

2, different chips, switch different settings.

3, launched after the driver, select a good chip models, the chip can plug into

the programmer.

4, EPROM chips, need to adjust jumper, according to the specific procedures can

be prompted to adjust.

4read the chip content and programming:

read out the chips in:

Chip and choose the correct place, you can click on the toolbar "read" button

and read out the content of chips. Read out the contents stored in the buffer zone,

if the data in the buffer zone will cover these data, you can click on the following

procedures screen "buffer" items, dragging the rolling of the buffer zone to view

the data.

Read the chip procedures in the process of programming on a bright yellow light

that has been working with chip voltage.

programming chips:

Choose the right place and type of chip, click on the Toolbar's "open file" button,


10/13



to write the document read to the buffer zone. The document can be downloaded from

the Internet you upgrade the document, you also can be saved before the backup files.

Then, click on the toolbar "program" button, the data into the buffer chip. Note that

some chip can be written into the air, you can use the "erase" function chips erased

the contents, then the use of "air check" to detect whether the chip is empty. After

the program, the program will automatically check into the data.

In the chip programmed in the process of bright yellow light if the chip also

needs Vpp programming voltage, the red indicator light will be bright.

5Copy chips:

First choice of chip types, and then plug in the original chip, the use of "read"

the original function read out the data chip, chip and then put on target, the use

of "programming" function can be written into the data.

Note:

1, if the wrong choice of models chips, or into the wrong position may burn chips.

2, some chips, such as SST39SF020 chips, need to be erased, in order to properly

write.

3, some chips, the choice of models, the process will remind you that in the chip

programming, to CPU cooling process, virus detection procedures for the closure, so

as not to affect the right into the chip.

4, drivers occupy less on system resources, in the chip operation in the process

of opening another window for other operations.

The following is the content of programming on the chip and a set of parameters

for advanced users, we can use the following operation, if the chip normal programming,

not to carry out the following adjustments to the primary users, and do not adjust

the following parameters.

R / C delay time: adjustment programming pulse delay. If your computer speed, the

programmer is not working properly, could be delayed for a point value.

Skip Write 0xFF: choice of programming when it is FF Skip content of bytes.

Fast Programming: choice is not fast programming.

Printer Port: choice of programming-connect the parallel port. Is usually LPT1

(0X378).

Offset: Programming began setting the address.

Check Type: CRC can choose 32 or 16 cumulative manner.

EPROM chip programming operation

EPROM chips on the operation, and common BIOS chip similar, the main difference

is that the programming on a jumper to make the appropriate settings. Below us to

write a 27 C16 (programming voltage of 12.5 V) chip for example, tell us specific

instructions:

1 Select chip and the setting up of:


11/13



Press the "chip select button" option corresponding to the chip models. DIP switch

procedure shows that the adjustment diagram, as shown, can be seen from the map, EPROM

chips, DIP switch settings and Flash ROM chip is different. Control this map, the

programmer on the DIP switch settings.

For EPROM chips, ZIP socket jumper right of the location, have also changed,

according to the procedures for prompt, and make the appropriate adjustments.

Some of the programming voltage chips higher, at this time, the program will prompt

you adjust programming for the right edge of the two jumpers, to get a higher Vpp

programming voltage. Specific operations, according to procedures set up to the tips.

The two jumpers, should not be adjusted at will, or will cause irreparable consequences

chip.

2Determine the location of chips:

DIP switches set up, and then determine the location of chips. Chip to 32 feet

on the ZIP socket, the direction of chip gap, the same is upward. Capacity of less

than 1 M chip, the pin number less than 32 feet, chips at the bottom, ZIP placed at

the bottom of the socket.

3Programming:

According to read data files, programming can be. Programming with a red indicator

light, said the programmer has provided the corresponding programming voltage Vpp.

Note: If you choose the wrong type chips, jumper settings error into the wrong position

or may burn EPROM chips.

Other detailed information, please visit the Web site: www.ischip.cn


12/13



Common motherboard chip models:

Manufacturers Model Memory VPP

Am29F010 1M

Am29F002 2M

Am29F040 4M

Am28F010A 1M VPP=12.0 V

Am28F020A 2M VPP=12.0 V

AMD

Am28F040 4M VPP=12.0 V

AE29F010A 1M

AE29F020 2M

AE29F040 4M

AE29F1008 1M

ASD

AE29F2008 2M

AT29C010A 1MAT29C020 2M

AT29C040 4M

AT49F001 1M

AT49F002 2M

Atmel

AT49F004 4M

CAT28F001BX-T/B 1M VPP=12.0 V

CAT28F010 1M VPP=12.0 VCATALYST

CAT28F020 2M VPP=12.0 V

i28F001BX-T/B 1M VPP=12.0 V

i28F010 1M VPP=12.0 VInteli28F020 2M VPP=12.0 V

MX28F1000P 1M VPP=12.0 V

MX28F2000P/T 2M VPP=12.0 V

MX29F001(N)T/B 1MMacronix

MX29F002(N)T/B 2M

FV29C51001T/B 1MMosel-Vitelic

FV29C51002T/B 2M

PH29EE010 1M

PH29EE020 2M

PH28SF040 4MPH39SF010 1M

SST

PH39SF020 2M

M28F256(A) 256K VPP=12.0 V

M28F512 512K VPP=12.0 V

M28F001 1M VPP=12.0 VSGSTHOMSON

M29F002TNTB 2M

W29EE011 1M

W29C010 1M

W29C020 2MWinbond

W29C040 4M


13/13



Chip substitution of knowledge:

BIOS chips above the logo in two strings, such as: Am29F010 AT29C020, and the number

of chips in front of the type related to 28 series of EEPROM chip; figures behind

the string with the size of the memory chips, such as that of its 010,001 1 M for

the chips, 020,002 note is 2 M chips; 1 M chip into the BIOS file for the length of

128 K, 2M chips for the 256 K.

Chip substitution principle is: as long as memory size, the same package, you can

substitute, chip manufacturers and types can be ignored. However, the use of 28 series

of chips (such as 29 series to replace the chip, because the two different programming

voltage, so you can use, but not on the motherboard programming, such as the need

to upgrade BIOS, can be programmed). For example: We can use a substitution AT29C020

chip on the motherboard original SST39SF020 or W29C020 chip; AT29C010 with a chip

on the motherboard replacement of the original SST29EE010 or W29EE011 chip.