Upload
victoriaalan
View
65
Download
0
Embed Size (px)
Citation preview
Troubleshooting Cisco Data Center Infrastructure (DCIT)
Cisco 300-180 VCE
https://www.vcetests.com/300-180-vce.html
Don’t take any tension for the preparation of 300-180 exam because we provide you real exam questions answers, testified dumps and updated practice test engine.
https://www.vcetests.com/300-180-vce.html
Free Demo
PDF + Practice Test
Desktop Practice test
Real Exam Questions Answers
PDF & VCE Questions & Answers
Cisco 300-180 Exam Questions Answers
Question: 1A customer is trying to boot an operating system that is installed on the eUSB on a Cisco UCS B-Seriesblade server; however, the boot fails. What is the cause of this failure?A. The local disk must be the first device in the boot order.B. eUSB is not a supported boot device.C. eUSB support is available only on the Cisco UCS C-Series rack server.D. eUSB is not the first device in the boot order for the server.Answer: D
https://www.vcetests.com/300-180-vce.html
Cisco 300-180 Exam Questions Answers
Question: 2A customer is troubleshooting degraded DIMM errors on a Cisco UCS blade server and would like to reset the BMC. What is the correct command sequence to reset the BMC?A. UCS1-A# server x/yUCS1-A /chassis/server # scope bmcUCS1-A /chassis/server/bmc # resetUCS1-A /chassis/server/bmc* # commit-bufferB. UCS1-A# server scopeUCS1-A /chassis/server # scope bmcUCS1-A /chassis/server/bmc # resetUCS1-A /chassis/server/bmc* # commit-bufferC. UCS1-A# scope server x/yUCS1-A /chassis/server # scope bmcUCS1-A /chassis/server/bmc # resetUCS1-A /chassis/server/bmc* # commit-bufferD. UCS1-A# scope server x/yUCS1-A /chassis/server # scope bmcUCS1-A /chassis/server/bmc* # commit-bufferAnswer: C
https://www.vcetests.com/300-180-vce.html
Cisco 300-180 Exam Questions Answers
Question: 3Which commands can you enter to see if a component in the Cisco UCS domain generated a core file?A. 6100-A# scope monitoring6100-A /monitoring # scope sysdebug6100-A /monitoring/sysdebug # show coresCore Files:Name Fabric ID---------- ---------B. 6100-A# scope sysdebug6100-A /sysdebug # scope monitoring6100-A /sysdebug/monitoring # show coresCore Files:Name Fabric ID
Answer: A
C. 6100-A# scope system6100-A /system # scope monitoring6100-A /system/monitoring # show coresCore Files:Name Fabric ID---------- ---------D. 6100-A# scope cores6100-A /cores # show coresCore Files:Name Fabric ID---------- ---------E. 6100-A# scope logging6100-A /logging # scope monitoring6100-A /logging/monitoring # show coresCore Files:Name Fabric ID
Cisco 300-180 Exam Questions Answers
Question: 4Which four tech support files can you create with the Cisco UCS Manager that you can submit to CiscoTAC for support? (Choose four.)A. UCSMB. disk LUNsC. fabric extenderD. memoryE. rack serverF. chassisG. server cacheAnswer: A, C, E, F
https://www.vcetests.com/300-180-vce.html
Cisco 300-180 Exam Questions Answers
Question: 5Which protocols can be used to send to Cisco TAC (Technical Assistance Center) the show tech-supportcommand output information about the Cisco UCS domain? (Choose two.)A. TFTPB. FTPC. SCPD. TelnetE. SecureTelnetAnswer: B, C
https://www.vcetests.com/300-180-vce.html
Cisco 300-180 Exam Questions Answers
Question: 6The Cisco UCS Manager displays FSM information for which four of these? (Choose four.)A. which FSM task is being executedB. the current state of an FSM taskC. the status of the previous FSM taskD. any error codes returned while processingE. all completed FSM tasksF. multiple FSM tasks that completed over multiple triesG. multiple FSM tasks that failedAnswer: A, B, C, D
https://www.vcetests.com/300-180-vce.html
Cisco 300-180 Exam Questions Answers
Question: 7How will the Cisco UCS Manager react when all of the FSM tasks fail?A. retries for 60 secondsB. raises faults and alarmsC. restarts from the previous known good taskD. sends an NOC SNMP trap emailAnswer: B
https://www.vcetests.com/300-180-vce.html
Cisco 300-180 Exam Questions Answers
Question: 8What should you do when you see faults during the initial setup and discovery process?A. Take note and address the faults.B. You can safely ignore these faults.C. Log them and try to address the first one.D. Reboot until the error messages go away.Answer: B
https://www.vcetests.com/300-180-vce.html
Cisco 300-180 Exam Questions Answers
Question: 9When using the Cisco UCS Manager GUI to troubleshoot a suspected bad memory, which logs contain data that are related to the faulty DIMM?A. the System Event log and Faults log that are located under the Admin tabB. the Events log and Faults log that are located under the Admin tabC. the System Event log that is located under the Server tab in the Navigation panel and the Faults logthat is located under the Admin tabD. the System Event log that is located under the Equipment tab and the Faults log that is located underthe Admin tabAnswer: D
https://www.vcetests.com/300-180-vce.html
Cisco 300-180 Exam Questions Answers
Question: 10Which three are valid tech support bundles to collect in the local management shell? (Choose three.)A. UCSMB. UCSM-MGMTC. Port-ChannelD. AdapterE. SANF. FEXAnswer: A, B, F
https://www.vcetests.com/300-180-vce.html
Offering
Effective
PDF Tests
Training to
Individuals
and
Companies
100%
Money Back
Guarantee
on All
Dumps
Special
Student
Discount
Available
Printable
and
Searchable
Braindumps
User
Interactive
Exams
Software
Get Free
Live
Updates
Exams
Software
Real Exam
Environment
Like Actual
Tests
https://www.vcetests.com/300-180-vce.html
Download Your Exam In PDF with Practice Test And Pass Your Exam In First Attempt
https://www.vcetests.com/300-180-vce.html