Lighthouse Electric.

•Brenda Gpe. De la Rosa Padrón.•Alejandra Díaz Vaca •2amt

Materials:Materials:

• SwitchSwitchFuseFuseLightsLightsCable proto Cable proto boardboardBatteryBatteryRelayRelayProto boardProto board

Procedure:•

First to get all the materials First to get all the materials to do the project.to do the project.After having all the After having all the materials you read the materials you read the following diagram.following diagram.

Place two pockets Place two pockets pretending to be lights, pretending to be lights, each bulb has its negative each bulb has its negative and positive .... With the and positive .... With the proto board to cable these proto board to cable these lights are connected to lights are connected to relay a positive and the relay a positive and the other pole of outbreaks is other pole of outbreaks is connected in the negative.connected in the negative.

Legend:Legend:Cable PositiveCable PositiveNegative CableNegative CableGroundGround

•

• After the negative pole of the

switch is connected to the proto negative and positive side is connected to the relay (the relay is to generate more energy than is being used)

The battery or power must be 12 volts, the negative terminal of the battery goes to the negative side of the proto, and the positive side is connected to a fuse (the fuse should generate 30 AMP.) And the fuse is another positive bridge relay.

Amp that has to apply to operate independently:

• 86 to the battery 86 to the battery cable or a fuse box cable or a fuse box that always has that always has power.power.85 to switch and 85 to switch and switch to land on a switch to land on a screw in the body.screw in the body.30 to the battery 30 to the battery with a fuse as with a fuse as close to the close to the battery.battery.87 to the 87 to the headlights.headlights.

•