4
@ IJTSRD | Available Online @ www ISSN No: 245 Inte R Tri- Amber Srivast Agman Department of Mechanical E ABSTRACT The project deals with the de manufacturing of a tri-wheeler stair c can climb stairs with less effort as manual work. The technical issues in de vehicle are the stability and speed of the climbing stair. The inclinations of the st important parameter for this study. The this special trolley are often used to such as books for library, medicines regular goods of any technical or institutes, or transportation of toxic industries and give freedom to the retar paralyzed patients to move anywhere ov as well as stairs. The vehicle has arrangement to support its weight when the flat surface. Each set of wheel fram three wheels attached with nuts and bo vehicle, the labour cost can be reduc huge amount of loads can be transfer with less power consumption. Moreove some drawbacks due to lack of implem techniques during manufacturing phase trial run showed considerably sig encouraging results that might hel researchers to incorporate a gear box mechanism to make the vehicle more ve Keywords - Trisection, Trolley, Stair Cli Wheeler Mechanism, Heavy Load INTRODUCTION In the modern world though ther developments in the field of engineeri are difficulties to carry heavy loads ov evolution of elevator reduces the effo heavy loads over stairs, it is not possibl all places like schools, colleges and w.ijtsrd.com | Volume – 2 | Issue – 4 | May-Jun 56 - 6470 | www.ijtsrd.com | Volum ernational Journal of Trend in Sc Research and Development (IJT International Open Access Journ -Wheeler Stair Climber tav, Aman Kaushal, Devansh Dhar Dubey Srivastava, Mr. Manabendra Saha Engineering ,ABES Engineering College, Uttar P esigning and climber, which compared to esigning of this e vehicle while tairs is also the application of lift the goods s in hospital, non technical materials for rded person or ver flat surface four wheels n it moves over me consists of olts. Using this ced as well as rred uniformly er, considering mentation of all e the test and gnificant and lp the future x and steering ersatile. imber, Tri- re are many ing. Still there ver stairs. The ort of carrying le to use lift in constructional areas. This project aims at d for easy transportation of heav need for such mechanism aris requirements in the society. trolleys are used to reduce the on flat grounds as well as on r difficulty in carrying of load Our project attempts to design which can carry heavy object effort compared to carrying th manner. The main objective of efficient and user friendly me objects through stairs using m user and also to provide a s climbing the stair. Under this and manufacture a stair clim frames at both sides of the cl on each sides are used in the vehicle is designed in such a wheels are on each side. Th pattern. The present project r equipment of a type that is moving upwardly and downw Load carrier is a wheeled generally used to carry a loa human efforts. PROJECT BACKGROUND Carrying loads like books, fo upper level, or even patients very tiring task, in the absenc Most of the buildings in the elevators or escalators facilitie humans are considered to be t becoming costly in the dev problem can be easily resolv loads while climbing up stairs. n 2018 Page: 1280 me - 2 | Issue 4 cientific TSRD) nal y, Pradesh, India developing a mechanism vy loads over stairs. The ses from our day to day Devices such as hand e effort of carrying loads ramps. However there is d over a flight of stairs. n a stair climbing trolley ts up the stairs with less hem in the conventional f the project is to find an thod of carrying various minimum effort from the smooth movement while s project we will design mber with tri wheeled limber and three wheels e tri section frame. The a way that it has three hey are set in triangular related to load carrying s manually operated of wardly on flight of stairs. mechanism device, is ads. It is use to reduce D ood grains etc. to store to move upper level is ce of facilities (elevator). world do not have the es, therefore in such case the solution. Labours are veloped countries. This ved if a vehicle can lift .

Tri-Wheeler Stair Climber

  • Upload
    ijtsrd

  • View
    14

  • Download
    0

Embed Size (px)

DESCRIPTION

The project deals with the designing and manufacturing of a tri wheeler stair climber, which can climb stairs with less effort as compared to manual work. The technical issues in designing of this vehicle are the stability and speed of the vehicle while climbing stair. The inclinations of the stairs is also the important parameter for this study. The application of this special trolley are often used to lift the goods such as books for library, medicines in hospital, regular goods of any technical or non technical institutes, or transportation of toxic materials for industries and give freedom to the retarded person or paralyzed patients to move anywhere over flat surface as well as stairs. The vehicle has four wheels arrangement to support its weight when it moves over the flat surface. Each set of wheel frame consists of three wheels attached with nuts and bolts. Using this vehicle, the labour cost can be reduced as well as huge amount of loads can be transferred uniformly with less power consumption. Moreover, considering some drawbacks due to lack of implementation of all techniques during manufacturing phase the test and trial run showed considerably significant and encouraging results that might help the future researchers to incorporate a gear box and steering mechanism to make the vehicle more versatile. Amber Srivastav | Aman Kaushal | Devansh Dhar Dubey | Agman Srivastava | Mr. Manabendra Saha "Tri-Wheeler Stair Climber" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-4 , June 2018, URL: https://www.ijtsrd.com/papers/ijtsrd14228.pdf Paper URL: http://www.ijtsrd.com/engineering/mechanical-engineering/14228/tri-wheeler-stair-climber/amber-srivastav

Citation preview

Page 1: Tri-Wheeler Stair Climber

@ IJTSRD | Available Online @ www.ijtsrd.com

ISSN No: 2456

InternationalResearch

Tri-

Amber SrivastavAgman Srivastava

Department of Mechanical Engineering ,ABES Engineering College, U

ABSTRACT The project deals with the designing and manufacturing of a tri-wheeler stair climber, whcan climb stairs with less effort as compared to manual work. The technical issues in designing of this vehicle are the stability and speed of the vehicle while climbing stair. The inclinations of the stairs is also the important parameter for this study. The application of this special trolley are often used to lift the goods such as books for library, medicines in hospital, regular goods of any technical or non technical institutes, or transportation of toxic materials for industries and give freedom to the retarded person or paralyzed patients to move anywhere over flat surface as well as stairs. The vehicle has four wheels arrangement to support its weight when it moves over the flat surface. Each set of wheel frame consists of three wheels attached with nuts and bolts. Using this vehicle, the labour cost can be reduced as well as huge amount of loads can be transferred uniformly with less power consumption. Moreover, considering some drawbacks due to lack of implementation of all techniques during manufacturing phase the test and trial run showed considerably significant and encouraging results that might help the future researchers to incorporate a gear box and steering mechanism to make the vehicle more versatile.

Keywords - Trisection, Trolley, Stair ClimbWheeler Mechanism, Heavy Load

INTRODUCTION In the modern world though there are many developments in the field of engineering. Still there are difficulties to carry heavy loads over stairs. The evolution of elevator reduces the effort of carrying heavy loads over stairs, it is not possible to use lift in all places like schools, colleges and

@ IJTSRD | Available Online @ www.ijtsrd.com | Volume – 2 | Issue – 4 | May-Jun 2018

ISSN No: 2456 - 6470 | www.ijtsrd.com | Volume

International Journal of Trend in Scientific Research and Development (IJTSRD)

International Open Access Journal

-Wheeler Stair Climber

Amber Srivastav, Aman Kaushal, Devansh Dhar Dubey,Agman Srivastava, Mr. Manabendra Saha

Department of Mechanical Engineering ,ABES Engineering College, Uttar P

The project deals with the designing and wheeler stair climber, which

can climb stairs with less effort as compared to manual work. The technical issues in designing of this vehicle are the stability and speed of the vehicle while climbing stair. The inclinations of the stairs is also the

dy. The application of this special trolley are often used to lift the goods such as books for library, medicines in hospital, regular goods of any technical or non technical institutes, or transportation of toxic materials for

to the retarded person or paralyzed patients to move anywhere over flat surface as well as stairs. The vehicle has four wheels arrangement to support its weight when it moves over the flat surface. Each set of wheel frame consists of

with nuts and bolts. Using this vehicle, the labour cost can be reduced as well as huge amount of loads can be transferred uniformly with less power consumption. Moreover, considering some drawbacks due to lack of implementation of all

anufacturing phase the test and trial run showed considerably significant and encouraging results that might help the future researchers to incorporate a gear box and steering mechanism to make the vehicle more versatile.

Trisection, Trolley, Stair Climber, Tri-

In the modern world though there are many developments in the field of engineering. Still there

y loads over stairs. The the effort of carrying

heavy loads over stairs, it is not possible to use lift in aces like schools, colleges and constructional

areas. This project aims at developing a mechanism for easy transportation of heavy loads over stairs. The need for such mechanism arises from our day to day requirements in the society. Devices such as hand trolleys are used to reduce the effort of carrying loads on flat grounds as well as on ramps. However there is difficulty in carrying of load over a flight of stairs. Our project attempts to design a stair climbing trolley which can carry heavy objects up the stairs with less effort compared to carrying them in the conventional manner. The main objective of the project is to find an efficient and user friendly method of objects through stairs using minimum effort from the user and also to provide a smooth movement while climbing the stair. Under this project we will design and manufacture a stair climber with tri frames at both sides of the climon each sides are used in the tri sectionvehicle is designed in such a way that it has three wheels are on each side. They are set in triangular pattern. The present project related to load carrying equipment of a type that is manually operated of moving upwardly and downwardly on flight of stairs. Load carrier is a wheeled mechanism device, is generally used to carry a loads. It is use to reduce human efforts. PROJECT BACKGROUNDCarrying loads like books, food grains etc.upper level, or even patients to very tiring task, in the absence of facilities (elevator). Most of the buildings in the world do elevators or escalators facilitieshumans are considered to be thebecoming costly in the developed countriesproblem can be easily resolvedloads while climbing up stairs.

Jun 2018 Page: 1280

www.ijtsrd.com | Volume - 2 | Issue – 4

Scientific (IJTSRD)

International Open Access Journal

Devansh Dhar Dubey,

Pradesh, India

areas. This project aims at developing a mechanism for easy transportation of heavy loads over stairs. The

mechanism arises from our day to day requirements in the society. Devices such as hand trolleys are used to reduce the effort of carrying loads on flat grounds as well as on ramps. However there is difficulty in carrying of load over a flight of stairs.

ur project attempts to design a stair climbing trolley which can carry heavy objects up the stairs with less effort compared to carrying them in the conventional manner. The main objective of the project is to find an efficient and user friendly method of carrying various objects through stairs using minimum effort from the user and also to provide a smooth movement while

r this project we will design and manufacture a stair climber with tri wheeled frames at both sides of the climber and three wheels

sides are used in the tri section frame. The vehicle is designed in such a way that it has three wheels are on each side. They are set in triangular pattern. The present project related to load carrying

is manually operated of moving upwardly and downwardly on flight of stairs. Load carrier is a wheeled mechanism device, is generally used to carry a loads. It is use to reduce

BACKGROUND loads like books, food grains etc. to store

upper level, or even patients to move upper level is , in the absence of facilities (elevator).

the buildings in the world do not have the facilities, therefore in such case

are considered to be the solution. Labours are the developed countries. This

problem can be easily resolved if a vehicle can lift s.

Page 2: Tri-Wheeler Stair Climber

International Journal of Trend in Scientific Research and Development (IJTSRD) ISSN: 2456-6470

@ IJTSRD | Available Online @ www.ijtsrd.com | Volume – 2 | Issue – 4 | May-Jun 2018 Page: 1281

The project introduces a new dimension for the transportation of the loads over stairs. Most of the buildings of countries are structurally small and do not have the elevator facility so it is difficult and tiresome to lift up heavy loads. The stair climbing vehicle can play a vital role in those areas to lift loads over short heights, like libraries, hospitals, and in construction areas. The vehicle, which can move upper level through stairs, or run in very rough and rocky surfaces, is called stair climbing vehicle.

PROBLEM STATEMENT Create and design an easy to build mechanism that will help transport shopping dollies up stairs smoothly for the price conscious customers. MATERIAL SELECTION We have compared the different properties of different grade of material and we found AISI 1020 was best suited material for our project due to ease of machinability,availability.

AISI 1020

It is a Carbon Steel with tensile strength of 420 MPa.

It has high Machinability and ductility. It posses high turning facilities and great surface

finish. It posses great hardnability by the process of

induction hardening.

DESIGN The central idea behind our design is to create a triwheeler stair climbing mechanism for carrying loads along stairs which would incorporate a tri wheel design. We wanted to stick with the principles that we established and wanted our prototype to fulfil all those requirements. After through research about the various available model which incorporate the same triwheel mechanism we came to a conclusion that we will a completely new stair climbing device which would be efficient both in stair climbing as well as its stability on stairs.

Top view

Exploded view

Tri section

Page 3: Tri-Wheeler Stair Climber

International Journal of Trend in Scientific Research and Development (IJTSRD) ISSN: 2456

@ IJTSRD | Available Online @ www.ijtsrd.com

Tri –Wheeler Mechanism CALCULATION Arm Length Calculation Figure shows geometrical diagram of tristairs.

R =

R =

R = 20.65 cm

Wheel Diameter Calculation The basic idea behind selecting the wheel diameter was that it should not hinder the trisection and the calculated by hit and trial method on the basis of trisection length such that it should climb the stairs.Diameter of wheel = 16cm Length and Height of Trolley The basic idea behind selecting length and height of the trolley was that the normal person (ranging from 4.5 feet to up) could easily hold the trolley for carrying the load. Length of Trolley= 860mm Height of Trolley = 1125mm

The final specification of the tri-wheeler stare as follows:

i. Diameter of Axle = 23mm ii. Trisection length = 206.5mm iii. Trisection Width = 35mm

International Journal of Trend in Scientific Research and Development (IJTSRD) ISSN: 2456

@ IJTSRD | Available Online @ www.ijtsrd.com | Volume – 2 | Issue – 4 | May-Jun 2018

geometrical diagram of tri-wheeler on

The basic idea behind selecting the wheel diameter was that it should not hinder the trisection and the was calculated by hit and trial method on the basis of trisection length such that it should climb the stairs.

The basic idea behind selecting length and height of on (ranging from

4.5 feet to up) could easily hold the trolley for

wheeler stair climber

iv. Diameter of wheel= 160mmv. Length of Trolley= 860mmvi. Height of Trolley = 1125mm

CONCLUSIONS Apart from a few limitations this project is of making any Stair Climbing Trolley.

i. The stair climbing trolley was designed and manufactured in such way that it could liftloads over stairs and also used for carryingon flat surface from one location to another reduced human effort.

ii. During the trail of this project, it was founwould be capable of carrying heavy load without suffering any deformation or local fractureswould go into real world production at an ideal scale.

iii. The initial cost of the project was a little bit but more accurate manufactur

iv. By using different materials we can reduce itweight and cost simultaneously.

v. It can be made more efficient by using gmechanism and electronics circuits.

SCOPE OF FUTURE WORKi. The material of the stair climber components

be changed because using material, weight of the stair climberincreased. Inspite of using MS as material we could use composite materials to reduce weight.

ii. Electric motor could be used to carry load at all types of surface . A sensor and steering wheel can be implemented to move around the stairs.

iii. A suspension system could be incorporated to reduce shocks and vibration

iv. The height of the Tri-sectional membermade adjustable, so that it could different sizes by using boltadjusting mechanisms

REFERENCES 1) Md. A.Hossain Nafis , A Chowdhury,Rubaiat

I.Linda and Shamiuzzaman Akhtar MIST,Dhaka1216,Bangladesh, p-ISSN: 2395

2) Gaikwad Avinash, Bhalerao Sachin, Finity Element Analysis of a Stair Case Material Handling System" International Journal of Scientific Engineering and Research (IJSER), ISSN (Online): 2347-3878, Volume 1 Issue 1, September 2013.

International Journal of Trend in Scientific Research and Development (IJTSRD) ISSN: 2456-6470

Jun 2018 Page: 1282

Diameter of wheel= 160mm Length of Trolley= 860mm Height of Trolley = 1125mm

this project is a first step aking any Stair Climbing Trolley.

climbing trolley was designed and manufactured in such way that it could lift inertial

stairs and also used for carrying loads e location to another with

of this project, it was found that it capable of carrying heavy load without

suffering any deformation or local fractures, if it would go into real world production at an ideal

l cost of the project was a little bit higher manufacturing would lessen it.

different materials we can reduce its weight and cost simultaneously.

efficient by using gear ronics circuits.

SCOPE OF FUTURE WORK erial of the stair climber components can

hanged because using MS AISI 1020 as a weight of the stair climber would be

. Inspite of using MS as material we use composite materials to reduce weight.

could be used to carry load at all sor and steering wheel can

be implemented to move around the stairs. ould be incorporated to

and vibrations. sectional member could be

made adjustable, so that it could climb stairs of by using bolts and nuts or another

Md. A.Hossain Nafis , A Chowdhury,Rubaiat I.Linda and Shamiuzzaman Akhtar MIST,Dhaka-

ISSN: 2395- 0072.

Gaikwad Avinash, Bhalerao Sachin, “Design and Finity Element Analysis of a Stair Case Material Handling System" International Journal of Scientific Engineering and Research (IJSER),

3878, Volume 1 Issue 1,

Page 4: Tri-Wheeler Stair Climber

International Journal of Trend in Scientific Research and Development (IJTSRD) ISSN: 2456-6470

@ IJTSRD | Available Online @ www.ijtsrd.com | Volume – 2 | Issue – 4 | May-Jun 2018 Page: 1283

3) Hsueh-Er, C., “Stair-climbing vehicle, 2008, “ Patent No. US2008164665(A1)”, Jan 24.

4) P.Jey Praveen Raj, P.M.Mohamed Fuge, R.Paul Caleb, G.Natarajan, Design and Fabrication of Stair Climbing Trolley,ISSN NO-2349 3224 Chennai, INDIA.

5) Roshan Alaspure, Chaitali Barmase, Snehal Chambhare, "Fabrication of Stair Climbing Wheel Mechanism: Alternate for lifting goods",International Research Journal of Engineering and Technology (IRJET), e-ISSN: 2395-0056, Volume-3 issue:5, May-2016.

6) R Rajkumar, K P Pranavkarthik, R Prashanth, "Design and Fabrication of Staircase Climbing Wheelchair", International Journal of Mechanical Engineering and Robotics Research, ISSN 2278-0149 , Volume 2, No.2, April 2013.